Saha, S., Islam, M. T. and Hossain, M. Z., Design of a Low Cost Multi Channel Data Logger, ARPN Journal of Engineering and Applied Sciences, Vol. 1, No. 1, June 2006, pp. 26-32.
Saha, S., Saha, G., Ali, M. and Islam, M. Q., Combined Free and Forced Convection Inside a Two-Dimensional Multiple Ventilated Rectangular Enclosure, ARPN Journal of Engineering and Applied Sciences, Vol. 1, No. 3, October 2006, pp. 23-35.
Saha, S., Islam, M. T., Ali, M., Mamun, M. A. H. and Islam, M. Q., Effect of Inlet and Outlet Locations on Transverse Mixed Convection Inside a Vented Enclosure, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, Vol. ME36, December 2006, pp. 27-37.
Saha, G., Saha, S. and Mamun, M. A. H., A Finite Element Method for Steady-State Natural Convection in a Square Tilt Open Cavity, ARPN Journal of Engineering and Applied Sciences, Vol. 2, No. 2, April 2007, pp. 41-49.
Islam, M. T., Saha, S., Mamun, M. A. H. and Saha, G., Natural Convection in an Inclined Square Enclosure Containing Internal Energy Sources, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh,Vol. ME37, June 2007, pp. 24-32.
Saha, G., Saha, S., Islam, M. Q. and Akhanda, M. A. R., Natural Convection in Enclosure with Discrete Isothermal Heating fromBelow, Journal of Naval Architecture and Marine Engineering, Vol. 4, No. 1, June 2007, pp. 1-13.
Saha, G., Saha, S., Ali, M. and Islam, M. Q., Natural Convection in a Vee-corrugated Square Enclosure with Discrete Heating From Below, Journal of Engineering and Technology, Vol. 6, No. 1, June 2007, pp. 15-27.
Saha, G., Saha, S. and Islam, M. Q., Natural Convection in a Modified Square Enclosure with Constant Flux Heating From Left, AIUB Journal of Science and Engineering, Vol. 6, No. 1, August 2007, pp. 89-96.
Saha, G., Islam, M. T., Saha, S. and Islam, M. Q., Natural Convection in Titled Isosceles Triangular Enclosure with Discrete Bottom Heating, Thammasat International Journal of Science and Technology., Vol. 12, No. 4, October-December 2007, pp. 24-35.
Saha, S., Mamun, M. A. H., Hossain, M. Z. and Islam, A. K. M. S., Mixed Convection in an Enclosure with Different Inlet and Exit Configurations, Journal of Applied Fluid Mechanics, Vol. 1, No. 1, 2008, pp. 78-93. Saha, S., Saha, G. and Islam, M. Q., Natural Convection in Square Enclosure with Adiabatic Cylinder at Center and Discrete Bottom Heating, Daffodil International University Journal of Science and Technology, Vol. 3, No. 1, January 2008, pp. 29-36.
Islam, M. T., Saha, S., Mamun, M. A. H. and Ali, M., Two Dimensional Numerical Simulation of Mixed Convection in a Rectangular Open Enclosure, Fluid Dynamics and Materials Processing, Vol. 4, No. 2, 2008, pp. 125-138.
Islam, M. Q., Ali, M. and Saha, S., Low Cost High Solidity Horizontal Axis Wind Turbine for Irrigation in Bangladesh, Journal of Energy, Heat and Mass Transfer. (In Press)
Uddin, H., Saha, S., Hasan, M. N. and Rahman, M. M., Effects of Rayleigh Number and Sidewall Inclination Angles on Convection in a Trapezoidal Cavity, ARPN Journal of Engineering and Applied Sciences. (Accepted)
Saha, S. and Ali, A. R. M., Thermal Buckling and Postbuckling Characteristics of Extensional Slender Elastic Rods, ARPN Journal of Engineering and Applied Sciences. (Accepted)
List of Conferences (national and international conferences and seminars)
Islam, M. Q., Hasan, M. N. and Saha, S., Experimental Investigation of Aerodynamics Characteristics of Two, Three and Four Bladed S-Shaped Stationary Savonius Rotors, Proceedings of 6th International Conference on Mechanical Engineering, Paper No. ICME05-FL-23, BUET, Dhaka, Bangladesh, December 28-30, 2005.
Saha, S. and Ali, M., Finite Element Analysis of Mixed Convection in an Open Cavity Heated fromBelow, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Paper No. 111, Jakarta, Indonesia, December 10 14, 2006.
Saha, S., Rahman, M. M., Alim, M. A., Mamun, M. A. H. and Islam, A. K. M. S., Opposing Mixed Convection in a Vented Enclosure: Effects of Inlet Port Location and Prandtl Number, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Paper No. 190, Jakarta, Indonesia, December 10 14, 2006.
Ali, M., Islam, S., Islam, M. Q. and Saha, S., Physics of Hydrogen Mixing with Air behind Finite Thickness Base, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Paper No. 101, Jakarta, Indonesia, December 10 14, 2006. Rahman, M. M., Saha, S., Alim, M. A. and Mamun, M. A. H., Effects of Duct Velocity Profile and Entry Length for Mixed Convection in a Horizontal Channel with an Open Cavity, Proceedings of the 11th Annual Paper Meet, Paper No. TF01, IEB, Dhaka, Bangladesh, December 25-26, 2006.
Islam, M. T., Saha, S., Ali, M. and Islam, M. Q., Numerical Analysis of Mixed Convection in a Channel with an Open Enclosure for Discrete Bottom Heating, Proceedings of the 11th Annual Paper Meet, Paper No. TF17, IEB, Dhaka, Bangladesh, December 25-26, 2006.
Saha, S., Ali, M., Mamun, M. A. H. and Islam, M. Q., Effect of Corrugation Frequency on Mixed Convection in a Vented Enclosure of Vee-Corrugated Vertical Walls, Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, Paper No. BA-132, Dhaka, Bangladesh, December 20 - 22, 2006.
Islam, M. T., Saha, S., Mamun, M. A. H. and Feroz, C. M., Computational Analysis of Mixed Convection Heat Transfer in a Ventilated Enclosure, Proceedings of 3rd BSME- ASME International Conference on Thermal Engineering, Paper No. BA-178, Dhaka, Bangladesh, December 20 - 22, 2006.
Saha, S. and Ali, A. R. M., Thermal Post buckling of Slender Extensible Pinned-Fixed Bar Under Non-uniformHeating, Proceedings of 7th International Conference on Mechanical Engineering, Paper No. ICME2007-AM-71, BUET, Dhaka, Bangladesh, December 29-31, 2007.
Koabra, F. T., Saha, S. and Alim, M. A., Natural Convection Heat Transfer around an Adiabatic Circular Cylinder Placed Inside a Square Open Cavity, published on the book of abstracts in 15th Mathematics Conference, Bangladesh Mathematical Society, University of Dhaka, Dhaka, Bangladesh, December 29-31, 2007.
Saha, G., Saha, S. and Rahman, M. M., Finite Element Method for Natural Convection in a Square Cavity with Vertical Isothermal Walls, published on the book of abstracts in 15th Mathematics Conference, Bangladesh Mathematical Society, University of Dhaka, Dhaka, Bangladesh, December 29-31, 2007.
Rahman, M. M., Alim, M. A., Saha, S. and Mamun, M. A. H., Mixed Convection in a Vented Enclosure with an Adiabatic Arc Shaped Baffle, published on the book of abstracts in 15th Mathematics Conference, Bangladesh Mathematical Society, University of Dhaka, Dhaka, Bangladesh, December 29-31, 2007.
Islam, M. T., Saha, S. and Saha, G., Numerical Simulation on Mixed Convection in a Parallelogrammic Ventilated Enclosure, published on the book of abstracts in 15th Mathematics Conference, Bangladesh Mathematical Society, University of Dhaka, Dhaka, Bangladesh, December 29-31, 2007. Saha, S. and Ali, A. R. M., Multisegment Integration Technique for Non-linear Thermal Postbuckling of Extensional Slender Elastic Rods, published on the book of abstracts in 15th Mathematics Conference, Bangladesh Mathematical Society, University of Dhaka, Dhaka, Bangladesh, December 29-31, 2007.
Saha, S., Saha, G. and Rahman, M. M., Numerical Investigation of Laminar Natural Convection in a Triangular Enclosure Heated FromBelow, published on the book of abstracts in 15th Mathematics Conference, Bangladesh Mathematical Society, University of Dhaka, Dhaka, Bangladesh, December 29-31, 2007.
Saha, S. and Ali, A. R. M., Thermal Post Buckling Characteristics of Slender Elastic Rods with General Boundary Conditions, Proceedings of the 12th Annual Paper Meet, Paper No. 165-NM07, IEB, Dhaka, Bangladesh, February 8-9, 2008.
Sultana, T., Saha, S. and Saha, G., Effect of Corrugation Geometry on Natural Convection Inside a Discretely Heated Enclosure, Proceedings of the 12th Annual Paper Meet, Paper No. 179-NM09, IEB, Dhaka, Bangladesh, February 8-9, 2008.
Uddin, H., Saha, S. and Hasan, M. N., Natural Convection Flows in a Trapezoidal Enclosure with Isoflux Heating From Below, Proceedings of the 12th Annual Paper Meet, Paper No. 182-EN08, IEB, Dhaka, Bangladesh, February 8-9, 2008.
Saha, G., Saha, S., Maleque, M. A., Chowdhury, M. M. K. and Islam, M. Q., Mixed Convection Inside a Lid-Driven Parallelogram Cavity with Isoflux Heating From Below, Proceedings of the 12th Annual Paper Meet, Paper No. 192, IEB, Dhaka, Bangladesh, February 8-9, 2008.
Saha, S., Saha, G. and Islam, M. Q., Mixed Convection Heat Transfer in a Vented Cavity with Multiple Discrete Heaters and Outlet Openings, published on the book of abstracts in Bose Conference on Contemporary Physics-08, Paper No. CSFM-4, Department of Physics, University of Dhaka, Dhaka, Bangladesh, March 19-21, 2008.
Uddin, H. and Saha, S., Mixed Convection Flows in a Lid-Driven Trapezoidal Cavity with Isoflux Heating fromBelow, published on the book of abstracts in Bose Conference on Contemporary Physics-08, Paper No. CSFM-2, Department of Physics, University of Dhaka, Dhaka, Bangladesh, March 19-21, 2008.
Sultana, T., Saha, S. and Saha, G., Study of Natural Convection Heat Transfer in a Square Cavity with Different Inclined Top, published on the book of abstracts in Bose Conference on Contemporary Physics-08, Paper No. CSFM-6, Department of Physics, University of Dhaka, Dhaka, Bangladesh, March 19-21, 2008.
Saha, S. and Saha, B. B., Double Diffusive Natural Convection in a VEE-corrugated Enclosure Heated fromBelow, The 7th JSME-KSME Thermal and Fluids Engineering Conference, Abstract No. tfec2008-abs-0391, Chuo-ku Sapporo, Japan, October 13-16, 2008. (Abstract accepted)
Saha, S., Saha, G. and Saha, B. B., Mixed Convection around an Adiabatic Cylinder Placed Inside an Inclined Lid-Driven Enclosure, The 7th JSME-KSME Thermal and Fluids Engineering Conference, Abstract No. tfec2008-abs-0454, Chuo-ku Sapporo, Japan, October 13-16, 2008. (Abstract accepted)
Saha, S. and Saha, B. B., Numerical Simulation on Double Diffusive Mixed Convection inside a Vented Square Cavity, The Second International Forum on Heat Transfer, Abstract No. 153, Tokyo, Japan, September 17-19, 2008. (Abstract accepted)
Saha, S. and Ali, A. R. M., Thermal Post buckling Analysis of Transversely Heated Slender Beams with Both Ends Pinned and Fixed, International Conference on Mechanical and Manufacturing Engineering 2008, Paper No. ME_0344, Johor, Malaysia, May 21-23, 2008. (accepted)
Islam, A. K. M. S., Saha, G., Saha, S. and Islam, M. Q., Effect of Inclination Angle on Mixed Convection in a Lid-Driven Enclosure with Internal Heat Generation, The 12th Asian Congress of Fluid Mechanics, Paper No. 12acfm-128, Daejeon, Korea, August 18- 21, 2008. (Abstract accepted)
Thesis M. Sc. Engg. Thesis: Post Buckling Analysis of a Slender Bar under Transversely Non-UniformTemperature Rise, Dept. of Mechanical engineering, BUET, Dhaka, Bangladesh, November 2007.
B.Sc. Engg. Thesis: Finite Element Analysis in Heat Transfer, Dept. of Mechanical engineering, BUET, Dhaka, Bangladesh, November 2004.
Professional Awards / Honors Received Awarded Deans Scholarship for three years while studying B. Sc. Engineering in the Department of Mechanical Engineering, BUET.
Awarded Board (Dhaka) Scholarship by the Government of Bangladesh for four years while studying B. Sc. Engineering in the Department of Mechanical Engineering, BUET.
Awarded University Merit Scholarship for all eight semesters while studying B. Sc. Engineering in the Department of Mechanical Engineering, BUET.
Professional Work at National and International Levels Reviewer, Indian Journal of Mathematics (IJM), Allahabad Mathematical Society, Allahabad-211001, Uttar Pradesh, India.
Reviewer, Bulletin of the Allahabad Mathematical Society (BAMS), Allahabad Mathematical Society, Allahabad-211001, Uttar Pradesh, India.
Reviewer, Proceedings of the 7 th International Conference on Mechanical Engineering, 29-31 December, 2007, BUET, Dhaka, Bangladesh.
Supervised the Project PC Interfaced Temperature Measurement and Controlling, under the Marine Engineering Specialization Course training program, Organized by the Department of Mechanical Engineering, BUET, Dhaka, September, 2005.