You are on page 1of 6

7/11/2014 Lesson 1: Introduction to Water Treatment

http://water.me.vccs.edu/courses/ENV110/Lesson1_print.htm 1/6
Lesson 1:
Introduction to Water Treatment

Objective
In this lesson we will learn about the following concepts:
The hydrologic cycle and how it is like nature's way of treating water
An introduction to water treatment

Reading Assignment
Along with the online lesson, read Chapter 2: Water Sources and Treatment, in your textbook
Operation of Water Treatment Plants Volume I.

Lecture
Hydrologic Cycle
Hello, I'm Rosa Moore from Mountain Empire Community College. I would like to introduce you
to a subject called water and wastewater treatment. In water and wastewater, there are many
concepts to learn so I thought I would start out with the way nature treats water - the hydrologic
cycle.
The hydrologic cycle follows water as it evaporates from the earth's surface, forms clouds, and then
falls back to the earth's surface as rain. The diagram below shows an overview of the process.
.
7/11/2014 Lesson 1: Introduction to Water Treatment
http://water.me.vccs.edu/courses/ENV110/Lesson1_print.htm 2/6
Since the cycle is continuous, there is no actual beginning or end, so you can begin anywhere.
However, there are five basic processes that make up the hydrologic cycle: Condensation,
precipitation, infiltration, runoff, and evapotranspiration. Water vapor condenses to form
clouds, which result in precipitation when the conditions are suitable. Precipitation falls to the
surface and infiltrates the soil or flows to the ocean as runoff. Surface water evaporates, returning
moisture to the atmosphere, while plants return water to the atmosphere by transpiration.
Condensation is the process of water changing from a vapor to a liquid. Water vapor in the air
rises mostly by convection. This means that warm, humid air will rise, while cooler air will flow
downward. As the warmer air rises, the water vapor will lose energy, causing its temperature to
drop. The water vapor then has a change of state into liquid or ice. You can see condensation in
action whenever you take a cold soda from the refrigerator and set it in a room. Notice how the
outside of the soda can "sweats"? The water doesn't come from inside the can, it comes from the
water vapor in the air. As the air cools around the can water droplets form.
Precipitation is water being released from clouds as rain, sleet, snow, or hail. Precipitation begins
after water vapor, which has condensed in the atmosphere, becomes too heavy to remain in
atmospheric air currents and falls. Under some circumstances precipitation actually evaporates
before it reaches the surface. More often, though, precipitation reaches the Earth's surface, adding
to the surface water in streams and lakes, or infiltrating the soil to become groundwater.
A portion of the precipitation that reaches the Earth's surface seeps into the ground through the
process called infiltration. The amount of water that infiltrates the soil varies with the degree of
land slope, the amount and type of vegetation, soil type and rock type, and whether the soil is
already saturated by water. The more openings in the surface (cracks, pores, joints) the more
infiltration occurs. Water that doesn't infiltrate the soil flows on the surface as runoff.
7/11/2014 Lesson 1: Introduction to Water Treatment
http://water.me.vccs.edu/courses/ENV110/Lesson1_print.htm 3/6
Precipitation that reaches the surface of the Earth but does not infiltrate the soil is called runoff.
Runoff can also come from melted snow and ice. When there is a lot of precipitation, soils become
saturated with water. Additional rainfall can no longer enter it. Runoff will eventually drain into
creeks, streams, and rivers, adding a large amount of water to the flow. Surface water always
travels towards the lowest point possible, usually the oceans. Along the way some water
evaporates, percolates into the ground, or is used for agricultural, residential, or industrial purposes.
Evapotranspiration is water evaporating from the ground and transpiration by plants.
Evapotranspiration is also the way water vapor re-enters the atmosphere. Evaporation occurs when
radiant energy from the sun heats water causing the water molecules to become so active that some
of them rise into the atmosphere as vapor. Transpiration occurs when plants take in water through
the roots and release it through the leaves, a process that can clean water by removing
contaminants and pollution.
As you can see, many processes are at work to give you the water you need. And these processes
are always at work. Just because Antarctica is frozen doesn't mean that evaporation is not taking
place (ice can turn directly to water vapor by a process called sublimation). And because the
Sahara Desert is so dry doesn't mean that precipitation is not happening (it evaporates before it
makes it to the ground).

Introduction to Water Treatment
Now that you know how nature treats water, let's see how it's done in the water plant before we
consume it in a glass of water.
Water treatment in a typical water treatment plant is shown in the picture below. Based on the
characteristics of the raw water and on other factors, this treatment process may vary considerably
from place to place.
7/11/2014 Lesson 1: Introduction to Water Treatment
http://water.me.vccs.edu/courses/ENV110/Lesson1_print.htm 4/6
As water is pumped from the source (a well, spring, river, or lake) it is screened to remove debris.
Then, at the water plant, various characteristics of the raw water are tested.
The water may be prechlorinated to kill microorganisms, control odors and taste, and aid in
coagulation and setttling. The water may also be aerated, which removes carbon dioxide (CO
2
)
and raises pH, oxidizes iron (Fe) and manganese (Mn), removes hydrogen sulfide (H
2
S), and
removes organic contaminants. Potassium permanganate (KmnO
4
) may be added to the water in
the collection tray of the aerator in order to remove iron and manganese from the water. Ozone
may be added to the water to treat iron and manganese, remove algae, neutralize hydrogen sulfide
(H
2
S), and aid in flocculation. Many of these are dependent upon the plant and the amount of water
being distributed daily.
In most cases, the water then enters a flash mix chamber. Here, various chemicals are added and
are mixed into the water. Coagulants cause fine particles to clump together into larger particles.
Alkali are added to adjust the pH as well as to oxidize iron and manganese. Hexametaphosphate
may be added to prevent corrosion of pipes.
After flowing out of the flash mix chamber, the water goes through a chamber which causes
coagulation and flocculation to occur. Here, the fine particles of contaminants gather together into
large clumps called floc. When the water flows into the sedimentation basin, some of the floc settles
out of the water and is removed. Next, the water is passed through filters which remove particles
7/11/2014 Lesson 1: Introduction to Water Treatment
http://water.me.vccs.edu/courses/ENV110/Lesson1_print.htm 5/6
too small to settle out in the sedimentation basin.
Finally, chlorine is added to the water. The water may also be fluoridated to reduce tooth decay in
the consumers. The water is left in the clear well for a period of time to allow the chlorine to kill
bacteria in the water and to oxidize hydrogen sulfide. The water is now treated and ready to be
distributed.
That was a quick overview of the water treatment process and what happens to water as it goes
through the plant step by step. We will get into greater detail in later lessons so that you will
understand each step of the process, why it is done and how to make sure each step is being done
efficiently.


Review
Nature treats water in its own way through the hydrologic cycle, though we still need to treat the
water before we drink it due to all the pollution and bacteria in the environment. The hydrologic
cycle provides the supply of water for us to use for consumption, continuously cycling through over
and over. The five basic processes that make up the hydrologic cycle are condensation,
precipitation, infiltration, runoff, and evapotranspiration.
In the water treatment plant the water comes in from the source, is aerated and the addition of
chemicals to aid in coagulation and flocculation occurs in the flash mix chamber, it is then allowed to
go through coagulation and flocculation, and settle out in the sedimentation basin. The water will
pass through a filtration system after the sedimentation basin, removing partilces that were too small
to settle out. Chlorine is added as the final step and then the water is stored until it is distributed to
the consumer.


Assignments
Work the following crossword puzzle that comes from definitions in your textbook. You may either
print the puzzle out, complete it and mail or fax back to the instructor or you may send an email
with the correct answers numbered accordingly.


Quiz
Answer the questions in the Pre-Quiz and the Lesson 1 quiz. When you have gotten all the answers
7/11/2014 Lesson 1: Introduction to Water Treatment
http://water.me.vccs.edu/courses/ENV110/Lesson1_print.htm 6/6
correct, print the page and either mail or fax it to the instructor. You may also take the quiz online
and submit your grade directly into the database for grading purposes.

You might also like