49 507 49 507 1/48 scale detail set for kit sada detail pro model Hobby Boss 1/48 Hobby Boss ORIGINAL KIT PARTS PVODN DLY STAVEBNICE PHOTO-ETCHED PARTS LEPTAN DLY PARTS TO BE REMOVED DLY K ODSTRANN FILL TMELIT eduard REMOVE ODSTRANIT OPTION VOLBA ? REPLACE NAHRADIT BEND OHNOUT GRIND OBROUSIT SYMETRICAL ASSEMBLY SYMETRICK MONT DRILL HOLE VRTAT OTVOR APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUT EXPRESS MASK NABARVIT PRED SLEPENM 29 28 36 C36 35 39 C36 = C11 9 8 7 16 16 15 15 17 4 4 C33 2 pcs. C14 = 1 2 5 3 12 11 10 H11 FILM = 13 27 27 38 38 38 38 14 C30 32 37 34 EDUARD M.A. 2010 www.eduard.com Made in Czech Republic 2/3 49 507 18 19 C46 33 2 pcs. 31 30 20 6 25 26 B2 P3 P4 23 22 40 41 film 24 21 B2 eduard For further detail sets look for 48 670 F-111D/E exterior (not included in this set) eduard For further detail sets look for 48 668 F-111 engine (not included in this set) eduard For further detail sets look for 49 501 F-111 avionics (not included in this set) eduard For further detail sets look for 49 498 F-111 seat early (not included in this set) eduard For further detail sets look for 49 500 F-111 seat late (not included in this set) 2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part. 2. Nepokldejte samolepc dly na voln plochy. Pokud je omylem pilepte, pi pokusu o odlepen dojde k pokozen dlu. 3. Do not touch the adhesive areas of the etched components. 3. Nesahejte na sti dl, na kterch je naneseno lepidlo. 1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames. 1.Samolepc dly oddlujte od rmeku na podkladovm pape. Po oddlen je sejmte z krycho papru. 4. Hold the parts by the edges, or at areas free of adhesive. 4. Samolepc dly berte za hrany nebo za sti, na kterch nen nanesen lepidlo. 5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted. 5. Dl lehce polote do pozice, ve kter m bt nalepen. Upravte pesnou pozici a pimknte. Dl dokonale pilne a po pimknut, ped pimknutm lze dlem opatrn manipulovat. PARTS WITH GLUE DLY OPATEN LEPIDLEM 3/3 49 507