The document describes a DCS band selective repeater with the following key points:
- It has an intelligent algorithm to prevent interference to nearby BTS and self-controls to minimize interference for new BTS rollouts.
- It can monitor the quality of donor signal for easy optimization and troubleshooting.
- The technical specifications include operating frequencies, bandwidth, gains, output power levels, noise figure, return loss, dimensions, weight and more.
The document describes a DCS band selective repeater with the following key points:
- It has an intelligent algorithm to prevent interference to nearby BTS and self-controls to minimize interference for new BTS rollouts.
- It can monitor the quality of donor signal for easy optimization and troubleshooting.
- The technical specifications include operating frequencies, bandwidth, gains, output power levels, noise figure, return loss, dimensions, weight and more.
The document describes a DCS band selective repeater with the following key points:
- It has an intelligent algorithm to prevent interference to nearby BTS and self-controls to minimize interference for new BTS rollouts.
- It can monitor the quality of donor signal for easy optimization and troubleshooting.
- The technical specifications include operating frequencies, bandwidth, gains, output power levels, noise figure, return loss, dimensions, weight and more.
for easy optimization and troubleshooting * Technical spec subject to change without notice. Intelligent algorithm to prevent interference to nearby BTS Self-control to minimize interference for new rollout BTS R27DM0-DCS Uplink Downlink Frequency Range 1710 ~1785 MHz 1805 ~1880 MHz Bandwidth(-3dB) various bandwidth is available upon request Max. Gain 88 dB 92 dB Manual Gain Control 31 dB in step of 1 dB Automatic Gain Control 20 dB Gain Flatness 3 dB(p-p) Max. Input Power Without Damage 0 dBm Output Power 27 dBm/total output power 43 dBm/total output power 400KHz 25 dBc 600KHz 35 dBc 1GHz 40 dBc 5GHz 50 dBc -36 dBm (9KHz ~1GHz) -30 dBm (1GHz ~12.75GHz) Noise Figure 5 dB Return Loss -14 dB 220 W Dimensions 590*420*240 mm Group Delay 4.5 uS RF Connector N-Female Impedance 50 Weight 35 kg IP Rating IP55 Operating Temperature -25~55 Control & Monitoring Spurious Emission Out of Band Rejection Local Via RJ 45 Port Remote Via Wireless Modem (optional) Monitor the Serving Cell BCCH, RSSI, RxQual, TA, BSIC, Cell ID, LAC, & Net Name. Monitor the Neighbor Cells ARFCN, Power, Cell ID, and LAC. Power Supply AC 110/220 V, 50/60 Hz Power Consumption Donor antenna Splitter R27DM0 Cable Server antenna Application Block Diagram Features Specifications FC FC R27DM0 DCS Band Selective Repeater