1. To press the set button till segment one is start
2. Segment 1 is start at end of sixth time with temperature setting 3. Temperature can be set by pressing the left arrow(indication blink_ set) 4. To_1 Means the rate of heat(time) dont change 5. Output- dont change 6. Segment -2- start 7. To_2-rate of heat(time) 8. Output dont change 9. Segment comes at end of eight (Seg_8) 10. Two indication comes after end of eighth segment Red real time Green program set can be started by pressing the Up arrow 11. Program end-press down Arrow.