Presented on 12 November during Metal Expo exhibition 2009, Moscow
Shtokman LNG plant and terminal
Piping (pipe fittings and flanges) Presented on 12 November during Metal Expo exhibition 2009, Moscow PIPING (pipe, fittings and flanges) 4 main categories of basic materials for all pipe, fittings and flanges: LTCS (Low temperature carbon steel, fine grained). pipe ASTM A333-Gr.6, ASTM A671-CC65,Class 22 fittings ASTM A420-WPL6 flanges ASTM A350-Gr.LF2 Stainless steels (SS304L, SS316L). pipe ASTM A312-TP304L, ASTM A358-Gr.304L ASTM A312-TP316L, ASTM A358-Gr.316L fittings ASTM A403-WP304L, ASTM A403-WP316L flanges ASTM A182-F304L, ASTM A182-F316L Low alloyed steel (2.25Cr-1.0Mo). pipe ASTM A335-P22 fittings ASTM A234-WP22,Class 1 flanges ASTM A182-F22,Class 3 Glass Reinforced Plastics. Basic materials : Presented on 12 November during Metal Expo exhibition 2009, Moscow PIPING (pipe, fittings and flanges) Pipe, fittings and flanges are based upon international standards and norms, supplemented with specific additional Company requirements. Also project specifications are specifically prepared to meet Russian Federation norm requirements. Dimensional standards: pipe ASME B36.10, ASME B36.19 fittings ASME B16.9 flanges ASME B16.5, ASME B16.47 series A Standards and norms : Presented on 12 November during Metal Expo exhibition 2009, Moscow PIPING (pipe, fittings and flanges) Sizes and pressure classes : Large nominal sizes and high pressure classes Presented on 12 November during Metal Expo exhibition 2009, Moscow PIPING (pipe, fittings and flanges) Estimated weights in tons: Estimated weight for sizes >= DN100: 43270 tons Presented on 12 November during Metal Expo exhibition 2009, Moscow PIPING (pipe, fittings and flanges) Good control of manufacturing process, heat treatment, etc. Quality of welding processes. Qualified personnel for Non-Destructive Examination. Full material traceability and certification. Reliable and short term delivery. Shtokman project is fast track project. Therefore good control required manufacturing and testing to ensure reliable and short term delivery. Russian steel manufacturers may be good positioned provided the following main primary conditions are observed: