The document provides specifications for several NP Series stepper motor drivers and one NPAD10BF driver board. The NP Series drivers include the NP7380, NP2671E2, and NP3775E3 and have specifications for motor voltage, output current, peak current, excitation type, package type, TTL input voltage, temperature ratings, and more. The NPAD10BF driver board specifications include input power supply, drive method, excitation modes, output current, control signals, operating temperature, dimensions, and that it is sold and serviced by Electromate.
The document provides specifications for several NP Series stepper motor drivers and one NPAD10BF driver board. The NP Series drivers include the NP7380, NP2671E2, and NP3775E3 and have specifications for motor voltage, output current, peak current, excitation type, package type, TTL input voltage, temperature ratings, and more. The NPAD10BF driver board specifications include input power supply, drive method, excitation modes, output current, control signals, operating temperature, dimensions, and that it is sold and serviced by Electromate.
The document provides specifications for several NP Series stepper motor drivers and one NPAD10BF driver board. The NP Series drivers include the NP7380, NP2671E2, and NP3775E3 and have specifications for motor voltage, output current, peak current, excitation type, package type, TTL input voltage, temperature ratings, and more. The NPAD10BF driver board specifications include input power supply, drive method, excitation modes, output current, control signals, operating temperature, dimensions, and that it is sold and serviced by Electromate.
Driver Type Translator for NP3775 Unipolar Constant V Bipolar PWM
Motor Operating Voltage 60 Vdc (max) 45Vdc (max) Output Current 10mA 0.35A 0.75A Peak Current 0.5A 0.85A Excitation Full/Half Full/Half Full/Half Package Type EMP, 14-pin EMP, 16-pin EMP, 24-pin TTL Input Voltage 6V 5V (typical) Junction Temperature 125 C 150 C Storage Temperature -40 to +125 C -55 to +150 C -55 to +150 C Operating Temperature -40 to +85 C -40 to +85 C -20 to +125 C Driver Chips Nippon Pulse Your Partner in Motion Control NPM NP Series NPAD10BF Electrical Specications Input Power Supply 12 to 30 5% Vdc Drive Method Bipolar Microstepping Chopper Excitation Mode Full, Half, 1/4, 1/16 Output Current 1.2 A/phase (peak) Control Signals Input Signal Type Optocoupler (Isolated) Input Signal Pulse, Dir, Enable and Reset Output Signal N/A Environmental Conditions Operating Temperature 0 to +40 C Storage Temperature Other Dimensions (W x D x H) 43.34 x 43.34 x 18.4 Weight Driver Board ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: