Load-line plots all the possible combinations of the
diode current I D and voltage V D for a given circuit Q-point the point where the load line and the characteristic curve intersect Determine (a) V DQ and I DQ (b) V R Si 10 V E R 1k I D 10 I D (mA) V D (V) 0.8 Answer 10V IDQ = 9.25 mA VDQ = 0.78 V Q point Repeat using the simplified equivalent circuit. Repeat using the ideal diode equivalent circuit. Answers 10V I DQ = 9.25 mA VDQ = 0.78 V Q point Q point Answers 10V I DQ = 10 mA VDQ = 0.78 V Q point V DQ = 0V Forward Bias Reverse Bias Determine (a) V D (b) I D (c) V R Si 8 V E R 2.2k I D Determine (a) V D (b) I D (c) V R
Si 8 V E R 2.2k I D Determine (a) V D (b) I D (c) V R Si 0.5 V E R 1.2 k I D Determine V O and I D . 12 V Vo Si red R 680 Color Constructi on Typical Voltage (V) Amber AlInGaP 2.1 Blue GaN 5.0 Green GaP 2.2 Orange GaAsP 2.0 Red GaAsP 1.8 White GaN 4.1 Yellow AlinGaP 2.1 Determine I D , VD 2 and V O . Determine I, V 1 , V 2 and V O . I + V1 - +
V2
-
Determine I 1 , I D1 , I D2 and V O Determine the current I in the circuit. R 2.2 k E1=20V E2=4V I Si Si D1 D2 Determine the voltage V O . 12 V Vo R 2.2 k Si Ge Determine I 1 , I 2 and I D2 . R1 3.3 k R2 5.6 k I1 I2 I D2 E = 20V Si Si D1 D2 1.(a) Using the characteristics shown on the next slide. Determine I D , V D , and V R for the given circuit. (b) repeat part a using the approximate model (c) repeat part a using the ideal diode model. 2. Determine V o and I D . 3. Determine V O and I D . 4. Determine V O1 , V O2 and I. Prepare for a long quiz next meeting Read and study your reference book and dont just rely on the power point presentation.