This document provides the dimensional, chemical, and physical requirements for flat washers made of 18-8 stainless steel. It lists the required minimum and maximum outer diameter, inner diameter, and thickness for various washer sizes. Any fasteners received that do not meet these specifications may result in corrective action and jeopardize the supplier's approved vendor status. All standards referenced must be fully adhered to.
This document provides the dimensional, chemical, and physical requirements for flat washers made of 18-8 stainless steel. It lists the required minimum and maximum outer diameter, inner diameter, and thickness for various washer sizes. Any fasteners received that do not meet these specifications may result in corrective action and jeopardize the supplier's approved vendor status. All standards referenced must be fully adhered to.
This document provides the dimensional, chemical, and physical requirements for flat washers made of 18-8 stainless steel. It lists the required minimum and maximum outer diameter, inner diameter, and thickness for various washer sizes. Any fasteners received that do not meet these specifications may result in corrective action and jeopardize the supplier's approved vendor status. All standards referenced must be fully adhered to.
Flat Washer, 18-8 Stainless Steel The information below lists the required dimensional, chemical and physical characteristics of the fasteners in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.
Min. Max. Min. Max. Min. Max. 1/4" x 1/2" x 1/32" 0.495 0.505 0.280 0.290 0.025 0.040 1/4" x 1/2" x 1/16" 0.495 0.505 0.280 0.290 0.055 0.070 5/16" x 5/8" x 0.050" 0.620 0.635 0.339 0.349 0.043 0.060 5/16" x 1" x 0.050" 0.995 1.005 0.339 0.349 0.043 0.060 3/8" x 5/8" x 0.050" 0.620 0.630 0.401 0.411 0.043 0.057 3/8" x 3/4" x 0.050" 0.745 0.755 0.401 0.411 0.043 0.057 3/4" x 1 1/2" x 0.109" 1.495 1.505 0.810 0.820 0.090 0.110 Size O.D. I.D. Thickness
Specification Requirements: Dimensions: See dimensions above. Material: 18-8 Stainless steel. Finish: Cleaned or descaled in accordance with ASTM A380.