RSView ME > RSLinx Enterprise > Communication Setup. Choose L32E / L35E Ethernet bridge and give a correct IP address. Right click on Virtual Backplane and Choose properties Change the address from 0 to 1 (Pls. Note that the Ethernet backplane address is always 1) and OK.
RSView ME > RSLinx Enterprise > Communication Setup. Choose L32E / L35E Ethernet bridge and give a correct IP address. Right click on Virtual Backplane and Choose properties Change the address from 0 to 1 (Pls. Note that the Ethernet backplane address is always 1) and OK.
RSView ME > RSLinx Enterprise > Communication Setup. Choose L32E / L35E Ethernet bridge and give a correct IP address. Right click on Virtual Backplane and Choose properties Change the address from 0 to 1 (Pls. Note that the Ethernet backplane address is always 1) and OK.