TYPICAL SLD 440V 220V Bus Conductor Bus Conductor support Conductor Insulator SWITCHYARD
Breaker CT CVT ISOLATOR SWITCHYARD STRUCTURE
CENTRAL CONTROL ROOM
POWER TRANSFORMER
ISOLATORS
SF6 BREAKER
BREAKER VACUUM BREAKER ISOLATOR
CURRENT TRANSFORMER Circuit Breaker The purpose of the circuit breakers is-
To disconnect the faulty element or circuit, leaving the rest of the power system intact To prevent other healthy equipment from being damaged by the fault currents they must carry. To reduce damage at the point of fault, important because the less damage caused by the fault the greater the probability of successful repair.
TYPES : AIR AIR BLAST SF 6 - VACUUM SF6 BREAKER CONTACT OPERATION
a. SF 6 Breaker contacts in closed position b. Opening operation- quenching process c. OPEN position
8 Insulator 1 2
GIS Switchgear
MV - LV SWITCHGEAR
Function: Electrical protection Electrical isolation of sections of an installation Local or remote switching
MV SWITCHGEAR
Air Insulated Gas Insulated Gas Insulated Switchgear
Air insulated Load break switch
LV SWITCHGEAR
Draw out modules Switchgear - protection
Relays HT LT Motors
An electric motor is an electromechanical device that converts electrical energy to mechanical energy.
The mechanical energy can be used to perform work such as rotating a pump impeller, fan, blower, driving a compressor, lifting materials etc CABLES EHV Power Cable MV Power Cable LV Power Cable Control Cable