5 Transient analysis of 1000Hz noise introduced in the supply voltage
A low pass fitter at output side can be used for suppressing issues of noise if frequency range is known Linearity Linearity of circuit can be achieved either the use of half bride or full bridge configuration . If quarter bridge (only one strain gauge) a linearizing circuit can be used for above purposes
Temperature dependency Use stain gauges of same material and specification and manufacture Supporting material should have small expansion coefficient Make use of compensation circuits Dummy bridges with very large change in temperature coefficient and very small change temperature coefficient of resistance with some arm configuration can be full fill this problem Some NTC with same rate of change of temp coefficient can be used