Make sure air compressor is switched on at switchboard (extreme left of
board). Open three v/vs on upper big air bottle. Start s/by ME lube oil p/p port side fwd bulkhead and s/by g/box p/p stbd aft bulkhead on HAND. Open fuel v/v to ME stbd side about half way along engine just below the plates. Open starting air to engine (large cock on vertical pipe stbd side of ER near No1 genr panel) Push green ME start button on engine to right of instrument panel. When engine starts, shut air v/v to engine, and switch both s/by p/ps to auto.
ME STOPPING
When engine is de-clutched push stop button next to alarm panel on fwd bulkhead upper deck level. When engine stops, switch s/by p/ps to off and close fuel v/v to engine, accept alarms (left button at bottom of alarm panel) and after about 10 minutes accept FO press alarm on ME alarm panel to left of main alarm panel.