SolidWorks Tutorial - Getting started with SolidWorks - Click the SolidWorks Icon. - Move around the mouse over the graphic window and get familiar with the software - Areas to notice: (1) Top: main menu area: Files, Views, Tools, Help (2) Side: SolidWorks Resources : Design Library : File explorer etc - Keep the cursor on the menu and Icons to display the meaning of each Overall Screen.
SolidWorks Tutorial - Getting started with SolidWorks - Click the SolidWorks Icon. - Move around the mouse over the graphic window and get familiar with the software - Areas to notice: (1) Top: main menu area: Files, Views, Tools, Help (2) Side: SolidWorks Resources : Design Library : File explorer etc - Keep the cursor on the menu and Icons to display the meaning of each Overall Screen.
SolidWorks Tutorial - Getting started with SolidWorks - Click the SolidWorks Icon. - Move around the mouse over the graphic window and get familiar with the software - Areas to notice: (1) Top: main menu area: Files, Views, Tools, Help (2) Side: SolidWorks Resources : Design Library : File explorer etc - Keep the cursor on the menu and Icons to display the meaning of each Overall Screen.
- Getting started with Solid Works Alternatively Start All programs SolidWorks 2011 SolidWorks 2011 x64 Edition
-You will see the graphic window of the software - Move around the mouse over the graphic window and get familiar with the software
- Areas to notice: (1) Top: main menu area: Files, Views, Tools, Help (2) Side : SolidWorks Resources : Design Library : File explorer etc
- Keep the cursor on the menu and Icons to display the meaning of each
Overall Screen Top area Side area Create a part (1) Click File new Click new on the Standard toolbar. Or (2) Click Parts and then OK (3) A graphic window will come (3) Graphic window (4) Select the top View as the sketch plane it Will be highlighted Your reference plane Not the sketch (5) Sketch the geometry (6) Close the sketch once you are done (6) Select the Sketch and Click the Features menu bar to make Extrude command Visible (7) Click the Extrude command and you will see this
Thickness Direction 1 Direction 2 (8) Click the Right mark (8) Extrude Cut (a) Select the top plane -- It will highlight (b) Click Sketch menu bar to make sketch entities visible ( c)Move around the mouse to get the mid point of the two edges
(d) Draw the circle
(e) Exit the Sketch mode (9) Circle on the top plane (a) Select the circle( Sketch 2) in the features tree (b) Click Extrude Cut Icon
(c) Click Ok (10) Complete the cut out Through all Final Part