NTEGRATON 2G BTS USNG NOKA NETACT 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Roll-Out Procedure InstaIIation Commissioning Integration the network elements are configured tested as stand-alone entities configure interconnection between network elements customising the radio network parameters ready for commercial use ready for calls (circuit and packet switched) physical installation of antennas, racks, subracks Power connections NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential ntegration Process Preparation for BTS site database (Creation) Checking and Activation of Transmission Link Unlocking The Site Test Call Checking Alarm Locking The Site and Waiting for ATP NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Prerequisites Ensure that the following tasks have been completed: The BTS site and transmission commissioning tasks have been completed before the BTS software is activated. The BSC that the BTS is connected to is integrated with the NetAct. The ET (Exchange Terminal) for the BTS site(s) is installed and configured in the BSC. The BSC ET is in working state. The correct BTS software package is available either in the BSC or NetAct. f GPRS functionality is included, the software package must include support for GPRS. The name and identification numbers of the transmission objects are available. MSC parameters have been created. 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Parameter Required Parameter Entry Sheet (PES) for BTS new sites from Radio Network Planning Engineer. Parameter of A-bis Allocation Time Slot (LAPD-Link) and ET from Transmission Planning Engineer. BSC Transmission Capacity from Transmission Planning Engineer. NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Preparation for BTS Site Database Creation) NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Preparation for BTS Site Database (Creation) Start Create LAPD links MML Command Session Create BCF Radio Network Manager Create BTS Radio Network Manager Create HOC and POC Radio Network Manager Continue. 8 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Continue. Create TRX(s) Radio Network Manager Create ADCE Radio Network Manager Create Views Network Editor End NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create LAPD Links The D-channels on Abis interface are the O & M signalling link (OMU link, OMUSG) and the telecom signalling link (TRX link, TRXSG). Check the BCSU for signaling capacity then find a suitable BCSU in the corresponding BSC with signaling capacity available for the new link. MML command for checking : ZEE::BCSU; Example : Checking BCSU at BSC Baturaden Z EEI::BCSU:; DX 200 BATURADEN 2005-01-26 13:13:39 NUMBER JF CREATED TRXS, LINKS AND REAL TCHS UNDER BCSUS: D-CHANNEL D-CHANNEL REAL UNIT TRXS TELECJM LINKS J&M LINKS TCHS ======== ====== ============= ========= ====== BCSU-3 57 57 6 465 BCSU-1 51 51 5 565 BCSU-2 51 51 12 438 BCSU-4 55 55 5 495 BCSU-5 55 55 5 507 BCSU-0 51 51 5 439 ======== ====== ====== TJTAL 320 2909 HARDWARE SUPPJRTED MAXIMUM TRX CAPACITY : 660 HW AND SW SUPPJRTED MAXIMUM TRX CAPACITY: 660 CJMMAND EXECUTED 10 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create LAPD Links Create LAPD Link Using MML Command DSE:<D-channel link set name:<unit type,<unit index:<service access point identifier,<terminal end point identifier:<bit rate,<PCM-TSL of D-channel; Naming convention for LAPD link name (D-Channel link set name) : For O & M signaling link (OMU link,OMUSG) : OM<BCFid> For telecom signaling link (TRX link,TRXSG):T<BCFid><TRXid> Where : BCFid = BCF number in digit decimal format, TRXid = TRX number in 1 digit hexadecimal format, Unit Type : BCSU Unit ndex : BCSU index for the new link created Service Access Point dentifier (SAP) : For OMUSG, SAP =2, For TRXSG, SAP =0 Terminal End Point dentifier (TE) : For OMUSG, TE =1, For TRXSG, TE= 1-12 CORRESPOND WTH TRX NUMBER Example : If the BCF id =1, and PCM/ET ID = 98, configuration 3/3/3 TRX ZDSE:OM001:BCSU,1:2,1:1,8-1,0; ZDSE:T0011:BCSU,1:0,1:2,8-25,0; ZDSE:T0012:BCSU,1:0,2:2,8-25,; ZDSE:T001:BCSU,1,0,:2,8-2,0; ZDSE:T0015:BCSU,1,0,5:2,8-2,0; ZDSE:T001:BCSU,1,0,:2,8-2,; ZDSE:T001:BCSU,1,0,:2,8-28,0; ZDSE:T001:BCSU,1,0,:2,8-2,0; ZDSE:T001A:BCSU,1,0,10:2,8-2,; ZDSE:T001B:BCSU,1,0,11:2,8-0,0; 11 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BCF Creating a BCF is done by RNW Manager application. To create a BCF: 1. Open RNW Manager from Top LeveI User Interface F UtiIs F Network Configuration Mgmt F RNW Manager 2. Expand the browser at the left until you see the BSC for this BCF 3. Highlight the BSC then press Select 12 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BCF . On the menu, click dd ChiId F ChiId by Object CIass and choose BCF then press OK 5. Fill in the Objects info in the Objects folder: identification of the BCF (BCF number), Name, Address, Maintenance Region and coordinate of the BCF. 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BCF . Go to the General folder and choose the correct LAPD link, BCF type and other parameters 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BCF . Fill in the necessary Outputs and nputs (External Alarm) definition if needed. 8. Once all parameters have been set, on the menu click FiIe FSend to Network to create the BCF in the BSC. 15 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential CREATNG EXTERNAL ALARM SYSTEM USNG MML ZEFX:001:NBR=1:ROU=ACT,POL=OPEN,:SEV=AL1,TD=1,:; ZEFX:001:NBR=2:ROU=ACT,POL=OPEN,:SEV=AL,TD=2,:; ZEFX:001:NBR=:ROU=ACT,POL=OPEN,:SEV=AL1,TD=,:; ZEFX:001:NBR=:ROU=ACT,POL=OPEN,:SEV=AL2,TD=,:; ZEFX:001:NBR=5:ROU=ACT,POL=OPEN,:SEV=AL,TD=5,:; ZEFX:001:NBR=:ROU=ACT,POL=OPEN,:SEV=AL2,TD=,:; ZEFX:001:NBR=:ROU=ACT,POL=OPEN,:SEV=AL1,TD=,:; ZEFX:001:NBR=8:ROU=ACT,POL=OPEN,:SEV=AL,TD=8,:; ZEFX:001:NBR=:ROU=ACT,POL=OPEN,:SEV=AL,TD=,:; ZEFX:001:NBR=11:ROU=ACT,POL=OPEN,:SEV=AL,TD=11,:; ZEFX:001:NBR=12:ROU=ACT,POL=OPEN,:SEV=AL,TD=12,:; ZEFX:001:NBR=1:ROU=NOT,POL=OPEN,:SEV=AL,TD=1,:; ZEFX:001:NBR=15:ROU=NOT,POL=OPEN,:SEV=AL,TD=15,:; ZEFX:001:NBR=1:ROU=NOT,POL=OPEN,:SEV=AL,TD=1,:; BCFid in Digit 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential EXTERNAL ALARM External alarm defined for indosat network is described as below : 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Assignment of External Alarm for UltraSite BTS Low Volt Battery Main (PLN OFF) Spare Arrester Fail Outdoor Unit AC AVR Automatic Bypass Major Rectifier Temperature ATS Fail Genset Run Fire Door Alarm Description Major 12 Critical 11 - 10 Minor 9 Major 8 Minor 7 Major 6 Major 5 Minor 4 Minor 3 Critical 2 Critical 1 Severity AL No. Remarks: 1. Cable pair no 1 to be used for external control output 2. For Eltek Rectifier, the assignment of Eltek's alarms are matched with the following description Load Fuse trip alarm no . AVR Automatic bypass Rectifier/Module Fail Major Rectifier Battery fuse trip : not connected at the moment 18 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BTS Creating a BTS is done by RNW Manager application. To create a BTS: Open RNW Manager appIication if not opened yet from Top LeveI User Interface FUtiIs FNetwork Configuration Mgmt FRNW Manager. Expand the browser on the Ieft for the destination BSC and the BCF where you need to create BTS to. HighIight the BCF and press SeIect. Go to the TempIate and seIect the TempIate. On the menu, cIick dd ChiId FChiId by Object CIass then seIect BTS then press OK. 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BTS . FiII in the object information on the Objects foIder: BTS id number), Name, and Network Name. 20 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BTS . On the GeneraI foIder, fiII in the CeII id, MNC, MCC, LC, RC, NCC, BCC, Hopping Mode, GPRS parameters, Frequency Band in use and other necessary parameters. 21 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BTS . On dditionaIs foIder, Diversity used is chosen on") 22 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create BTS On CeII ccess foIder, fiII in Rx Lev ccess Min Rx LeveI and MS Tx Pwr Max CCH The parameters at other foIder CCH & Interference, Quequeing & C2, etc) if necessary Once aII parameter is set, on the menu cIick FiIe FSend to network to create the BTS. 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create HOC and POC Creating HOC and POC are done by RNW Manager application. To create a BTS: Open RNW Manager appIication if not opened yet from Top LeveI User Interface FUtiIs FNetwork Configuration Mgmt FRNW Manager. Expand the browser on the Ieft for the destination BSC-BCF-BTS where you need to create HOC to HighIight the BTS and press SeIect. Go to the TempIate and seIect the TempIate. HighIight the BTS and press SeIect . Go to the TempIate and seIect the TempIate. On the menu, cIick dd ChiId FChiId by object cIass then seIect HOC then press OK. 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create HOC and POC FiII in the object information on the Objects foIder: HOC id number). FiII in aIso the necessary parameters in GeneraI, veraging, etc foIder. Once aII parameter is set, on the menu cIick FiIe FSend to network to create the HOC. Repeat the procedure from step 1-3 to create POC but when cIick dd ChiId FChiId by object cIass then seIect POC then press OK. ) 25 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create HOC and POC FiII in the object information on the Objects foIder: POC id number). FiII in aIso the necessary parameters in GeneraI, veraging, etc foIder. Once aII parameter is set, on the menu cIick FiIe FSend to network to create the POC. 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create TRX TRX(s) is done by RNW Manager application. To create a TRX: Open RNW Manager appIication if not opened yet from Top LeveI User Interface FUtiIs FNetwork Configuration Mgmt FRNW Manager. Expand the browser on the Ieft for the destination BSC-BCF-BTS where you need to create HOC HighIight the BTS and press SeIect. On the menu, cIick dd ChiId FChiId by object cIass then seIect TRX then press OK. 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create TRX . FiII in the object information on the Objects foIder: TRX id number) 28 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create TRX . FiII in the GeneraI information: InitiaI Frequency, EDGE vaiIabiIity, TSC =BCC), GPRS Parameters, LPD Iink and other required parameters. 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create TRX FiII in the PCM-TSL and channeI type in the ChanneIs foIder FiII in aIso the necessary parameters in other foIders Once aII parameter is set, on the menu cIick FiIe FSend to network to create the TRX Repeat the procedure from step 2-9 to create other TRXs. 0 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create ADCE ADCE is done by RNW Manager application. To create ADCE : Open RNW Manager appIication if not opened yet from Top LeveI User Interface FUtiIs FNetwork Configuration Mgmt FRNW Manager. Expand the browser on the Ieft for the destination BSC-BCF-BTS where you need to create DCE HighIight the BTS and press SeIect. On the browser, search the destination BTS by expanding the destination BSC-BCF untiI you see the target BTS HighIight both source BTS and target BTS Hint: press and hoId CTRL button to seIect muItipIe objects) On the menu, cIick dd ChiId Fdjacent CeII if you need to create one-direction adjacency or seIect MuItipIe djacenct CeIIs for bi-directionaI adjacencies 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create ADCE . If you onIy need to seIect one-directionaI adjacency, you can swap the source and target or create bi-directionaI adjacencies automaticaIIy 8. If you onIy choose to create one-direction adjacency, check and change the parameters before sending it to network by FiIe FSend to Network. Note: before sending to network, the djacency's CI, LC, BSIC and BCCH Frequency wiII be zero. It wiII be updated after sending to network. 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create ADCE 8. If you onIy choose to create one-direction adjacency, check and change the parameters before sending it to network by FiIe FSend to Network. Note: before sending to network, the djacency's CI, LC, BSIC and BCCH Frequency wiII be zero. It wiII be updated after sending to network. Change any necessary parameters at the foIders NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Create ADCE 9. When you create MuItipIe djacency in step ), the system wiII onIy ask for your confirmation to create muItipIe adjacencies and then send to network automaticaIIy. This wiII create incoming and outgoing adjacencies. NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking and Activation Transmission Link 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking and Activation Transmission Link Start Checking ET (Exchange Terminal) MML Command Session Activate the ET MML Command Session Checking D-Channel MML Command Session Activate the D-Channel MML Command Session End NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking ET (Exchange Terminal) Checking the state of ET using MML command session ZUSI: INTERROGTE UNIT STTE USI:<unit type | ALL def,, <unit index... | <unit group..., <unit index... |<all def,: <configuration | <own side def,: <name of remote station | <all remote units within given type def,; Example : Checking PCM/ET ID = 98 BASE STATIJN CJNTRJLLER HANDLING CJMMAND <EE_ < USI:ET,61; LJADING PRJGRAM VERSIJN 19.10-1 EXECUTIJN STARTED DX 200 BATURADEN 2005-02-28 15:55:58 WJRKING STATE JF UNITS UNIT PHYS STATE LJCATIJN INFJ ET-61 WJ-EX 1A005-00 BCSU-0 - TJTAL JF 1 UNITS CJMMAND EXECUTED NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Activate The ET Working State : SE - NH (Separate No Hardware) --> initial condition SE - OU TE - EX WO EX (Working Execute) Activate the ET using MML command session ZUSC: CHNGE UNIT STTE USC:<unit type, <unit index | <unit group, <unit index ,: <working state, FCD | <controlled transition def,: C= (<code load mode | JPT def )| F= (<file load mode | VIRT def) ,...; Example : ctivae PCM/ET ID = 98 USC:ET,98 :WO,FCD; 8 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking D-Channel Checking the state D-Channel using MML command session There are 2 command used : DTI: INTERROGTE D-CHNNEL WORKING STTE Use this command to interrogate the working states of the D-channeIs in a D-channeI Iink set. DTI:NAME=<D-channel link set name | <all def, | NUMBER=<D-channel link set number | <all def,,: <unit type | <all def,, <unit index | <all def,,: SAPI=<service access point identifier | <all def, | PCM=<external PCM of D-channel | <all def,,: <D-channel working state | <all def,; NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking D-Channel Example : Checking D-ChanneI at ET/PCM=1 < DTI:::PCM=61; LJADING PRJGRAM VERSIJN 8.12-0 DX 200 BATURADEN 2005-02-28 15:58:18 INTERRJGATING D-CHANNEL WJRKING STATE INTERFACE EXT SUB WJRKING NAME NUM UNIT SIDE PCM-TSL-TSL SAPI STATE ----- --- ------ --------- ----------- ---- ------- JM001 15 BCSU-0 NETW 61-31-00 62 WJ-EX T0011 16 BCSU-0 NETW 61-25-00 0 WJ-EX T0012 17 BCSU-0 NETW 61-25-04 0 WJ-EX T0013 18 BCSU-0 NETW 61-26-00 0 WJ-EX T0014 19 BCSU-0 NETW 61-26-04 0 WJ-EX T0015 20 BCSU-0 NETW 61-27-00 0 WJ-EX T0016 21 BCSU-0 NETW 61-27-04 0 WJ-EX T0017 22 BCSU-0 NETW 61-28-00 0 WJ-EX T0018 23 BCSU-0 NETW 61-28-04 0 WJ-EX T0019 24 BCSU-0 NETW 61-29-00 0 WJ-EX T001A 25 BCSU-0 NETW 61-29-04 0 WJ-EX T001B 26 BCSU-0 NETW 61-30-00 0 WJ-EX T001C 27 BCSU-0 NETW 61-30-04 0 WJ-EX CJMMAND EXECUTED 0 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking D-Channel ZDSB: INTERROGTE BSE STTION CONTROLLER D-CHNNEL DT Use this command to interrogate the data on the specified or aII existing D-channeIs on the base station controIIer. DSB:NAME=<D-channel link set names | <all def, | NUMBER=<D-channel link set numbers | <all def,,: <unit type | <all def, | <unit index | <all def,,: <SAPI=<service access point identifier | <all def, | PCM=<external PCM of D-channel | <all def,,; 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking D-Channel Example : Checking D-ChanneI at ET/PCM=98 < DSB:::PCM=61; LJADING PRJGRAM VERSIJN 9.14-0 DX 200 BATURADEN 2005-02-28 15:59:58 INTERRJGATING BASE STATIJN CJNTRJLLER D-CHANNEL DATA EXT SUB TERM LJG LJG INT NAME NUM SAPI TEI BR PCM-TSL-TSL C UNIT TERM FUNC UNIT TERM PCM-TSL ----- --- ---- --- -- ----------- - --------------- ---------- ------- JM001 15 62 1 16 61-31-0 BCSU-0 1 3 4160H 13 6-03 T0011 16 0 1 32 61-25-0 BCSU-0 2 3 4160H 14 64-03 T0012 17 0 2 32 61-25-4 BCSU-0 1 4 4160H 15 6-04 T0013 18 0 3 32 61-26-0 BCSU-0 2 4 4160H 16 64-04 T0014 19 0 4 32 61-26-4 BCSU-0 1 5 4160H 17 6-05 T0015 20 0 5 32 61-27-0 BCSU-0 2 5 4160H 18 64-05 T0016 21 0 6 32 61-27-4 BCSU-0 0 6 4160H 19 5-06 T0017 22 0 7 32 61-28-0 BCSU-0 1 6 4160H 20 6-06 T0018 23 0 8 32 61-28-4 BCSU-0 2 6 4160H 21 64-06 T0019 24 0 9 32 61-29-0 BCSU-0 0 7 4160H 22 5-07 T001A 25 0 10 32 61-29-4 BCSU-0 1 7 4160H 23 6-07 T001B 26 0 11 32 61-30-0 BCSU-0 2 7 4160H 24 64-07 T001C 27 0 12 32 61-30-4 BCSU-0 0 8 4160H 25 5-08 CJMMAND EXECUTED 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Activate The D-Channel From the user's point of view, the D-channel has the following working states: working, WO-EX blocked, BL-XX * blocked by system, BL-SY * blocked by user, BL-US activation denied, UA-AD. NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Activate The D-Channel Activate the D-Channel using MML command session ZDTC: MODIFY D-CHNNEL WORKING STTE Use this command to modify the working state of a D-channeI in a D-channeI Iink set. DTC: <D-channel link set name: <D-channel state change; Example : ctivate the D-channeI for BCF id =1, and PCM/ET ID = 98 created at sIide# 10) ZDTC:OM031;WO ZDTC:T0311:WO; ZDTC:T0312:WO; ZDTC:T0313:WO; ZDTC:T031:WO; ZDTC:T031:WO; ZDTC:T031:WO; ZDTC:T0319:WO; ZDTC:T031:WO; ZDTC:T031B:WO; NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential UNLOCKING THE SITE 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Unlocking The Site To unlock the site using RNW Manager: 1. Open RNW Manager application if not opened yet from Top Level User nterface FUtils FNetwork Configuration Mgmt F RNW Manager. 2. Expand the browser on the left for the destination BSC and the BCF which you want to unlock . Highlight the BCF then press Select . On the menu, click State F Unlock NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Unlocking The Site 5. SeIect UnIock chiIdren aIso to unIock the BTSs and TRXs then select OK. NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential TEST CALL 8 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential TEST CALL The purpose of test call is for ensuring that the BTS is ready for commercial used and capable for handling handling traffic. During test call, coordinating with drive test team and BTS engineer, check the occupied TRX and RTSL. Check the status of occupied TRX and RTSL from MML Command session. ZERO: OUTPUT TRNSCEIVER PRMETERS ERJ :( BCF = <BCF identification ... | BTS = <BTS identification ... | NAME = <BTS name ... | SEG = <segment identification <option ... | SEGNAME = <segment name <option ... ) , TRX = <transceiver identification ... | IFREQ = <TRX identification with frequency ... , ; NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential TEST CALL Example : ERJ:BCF=1,; DX 200 BATURADEN 2005-02-28 16:05:15 TRANSCEIVER DATA ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-001 ADIPALA1 BTS-001 ADIPALA1 UNLJCKED WJ TRX-001 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX N FREQ 5 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 50 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 16 T0011 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 1 0 TCHF 0 UNLJCKED WJ FR 1 61- 1 1 TCHF 0 UNLJCKED WJ ID 2 61- 1 2 TCHF 0 UNLJCKED WJ FR 3 61- 1 3 TCHF 0 UNLJCKED WJ ID 4 61- 2 0 TCHF 0 UNLJCKED WJ ID 5 61- 2 1 TCHF 0 UNLJCKED WJ ID 6 61- 2 2 TCHF 0 UNLJCKED WJ ID 7 61- 2 3 TCHF 0 UNLJCKED WJ ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-001 ADIPALA1 BTS-001 ADIPALA1 UNLJCKED WJ TRX-002 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX N FREQ 40 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - SIGN 0 51 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 17 T0012 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61 - MBCCH - UNLJCKED WJ 1 61 - SDCCH - UNLJCKED WJ 2 61 - SDCCH - UNLJCKED WJ 3 61- 3 3 TCHF 0 UNLJCKED WJ FR 4 61- 4 0 TCHF 0 UNLJCKED WJ FR 5 61- 4 1 TCHF 0 UNLJCKED WJ FR 6 61- 4 2 TCHF 0 UNLJCKED WJ FR 7 61- 4 3 TCHF 0 UNLJCKED WJ FR ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-001 ADIPALA1 BTS-001 ADIPALA1 UNLJCKED WJ TRX-003 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX Y FREQ 1 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 52 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 18 T0013 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 5 0 TCHF 0 UNLJCKED WJ ID 1 61- 5 1 TCHF 0 UNLJCKED WJ ID 2 61- 5 2 TCHF 0 UNLJCKED WJ FR 3 61- 5 3 TCHF 0 UNLJCKED WJ ID 4 61- 6 0 TCHF 0 UNLJCKED WJ ID 5 61- 6 1 TCHF 0 UNLJCKED WJ ID 6 61- 6 2 TCHF 0 UNLJCKED WJ GP 7 61- 6 3 TCHF 0 UNLJCKED WJ GP ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-001 ADIPALA1 BTS-001 ADIPALA1 UNLJCKED WJ TRX-004 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX Y FREQ 3 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 19 T0014 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 7 0 TCHF 0 UNLJCKED WJ ID 1 61- 7 1 TCHF 0 UNLJCKED WJ ID 2 61- 7 2 TCHF 0 UNLJCKED WJ ID 3 61- 7 3 TCHF 0 UNLJCKED WJ ID 4 61- 8 0 TCHF 0 UNLJCKED WJ ID 5 61- 8 1 TCHF 0 UNLJCKED WJ ID 6 61- 8 2 TCHF 0 UNLJCKED WJ ID 7 61- 8 3 TCHF 0 UNLJCKED WJ ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-002 ADIPALA2 BTS-002 ADIPALA2 UNLJCKED WJ TRX-005 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX N FREQ 28 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - SIGN 0 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 20 T0015 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61 - MBCCH - UNLJCKED WJ 1 61 - SDCCH - UNLJCKED WJ 2 61 - SDCCH - UNLJCKED WJ 3 61- 9 3 TCHD 0 UNLJCKED WJ ID ID 4 61- 10 0 TCHD 0 UNLJCKED WJ FR 5 61- 10 1 TCHD 0 UNLJCKED WJ ID ID 6 61- 10 2 TCHD 0 UNLJCKED WJ FR 7 61- 10 3 TCHD 0 UNLJCKED WJ ID ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-002 ADIPALA2 BTS-002 ADIPALA2 UNLJCKED WJ TRX-006 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX N FREQ 7 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 55 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 21 T0016 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 11 0 TCHD 0 UNLJCKED WJ ID ID 1 61- 11 1 TCHD 0 UNLJCKED WJ ID ID 2 61- 11 2 TCHD 0 UNLJCKED WJ ID ID 3 61- 11 3 TCHD 0 UNLJCKED WJ ID ID 4 61- 12 0 TCHD 0 UNLJCKED WJ ID ID 5 61- 12 1 TCHD 0 UNLJCKED WJ FR 6 61- 12 2 TCHD 0 UNLJCKED WJ ID ID 7 61- 12 3 TCHD 0 UNLJCKED WJ ID ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-002 ADIPALA2 BTS-002 ADIPALA2 UNLJCKED WJ TRX-007 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX Y FREQ 9 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 22 T0017 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 13 0 TCHD 0 UNLJCKED WJ ID ID 1 61- 13 1 TCHD 0 UNLJCKED WJ ID ID 2 61- 13 2 TCHD 0 UNLJCKED WJ ID ID 3 61- 13 3 TCHD 0 UNLJCKED WJ ID ID 4 61- 14 0 TCHD 0 UNLJCKED WJ ID ID 5 61- 14 1 TCHD 0 UNLJCKED WJ ID ID 6 61- 14 2 TCHD 0 UNLJCKED WJ GP 7 61- 14 3 TCHD 0 UNLJCKED WJ GP ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-002 ADIPALA2 BTS-002 ADIPALA2 UNLJCKED WJ TRX-008 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX Y FREQ 11 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 23 T0018 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 15 0 TCHD 0 UNLJCKED WJ ID ID 1 61- 15 1 TCHD 0 UNLJCKED WJ ID ID 2 61- 15 2 TCHD 0 UNLJCKED WJ ID ID 3 61- 15 3 TCHD 0 UNLJCKED WJ ID ID 4 61- 16 0 TCHD 0 UNLJCKED WJ ID ID 5 61- 16 1 TCHD 0 UNLJCKED WJ ID ID 6 61- 16 2 TCHD 0 UNLJCKED WJ ID ID 7 61- 16 3 TCHD 0 UNLJCKED WJ ID ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-003 ADIPALA3 BTS-003 ADIPALA3 UNLJCKED WJ TRX-009 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX N FREQ 35 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - SIGN 0 58 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 24 T0019 RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61 - MBCCH - UNLJCKED WJ 1 61 - SDCCH - UNLJCKED WJ 2 61 - SDCCH - UNLJCKED WJ 3 61- 17 3 TCHF 0 UNLJCKED WJ ID 4 61- 18 0 TCHF 0 UNLJCKED WJ ID 5 61- 18 1 TCHF 0 UNLJCKED WJ ID 6 61- 18 2 TCHF 0 UNLJCKED WJ ID 7 61- 18 3 TCHF 0 UNLJCKED WJ ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-003 ADIPALA3 BTS-003 ADIPALA3 UNLJCKED WJ TRX-010 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX N FREQ 13 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 25 T001A RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 19 0 TCHF 0 UNLJCKED WJ ID 1 61- 19 1 TCHF 0 UNLJCKED WJ ID 2 61- 19 2 TCHF 0 UNLJCKED WJ ID 3 61- 19 3 TCHF 0 UNLJCKED WJ ID 4 61- 20 0 TCHF 0 UNLJCKED WJ ID 5 61- 20 1 TCHF 0 UNLJCKED WJ ID 6 61- 20 2 TCHF 0 UNLJCKED WJ ID 7 61- 20 3 TCHF 0 UNLJCKED WJ ID ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-003 ADIPALA3 BTS-003 ADIPALA3 UNLJCKED WJ TRX-011 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX Y FREQ 15 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 0 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 26 T001B RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 21 0 TCHF 0 UNLJCKED WJ ID 1 61- 21 1 TCHF 0 UNLJCKED WJ ID 2 61- 21 2 TCHF 0 UNLJCKED WJ ID 3 61- 21 3 TCHF 0 UNLJCKED WJ ID 4 61- 22 0 TCHF 0 UNLJCKED WJ ID 5 61- 22 1 TCHF 0 UNLJCKED WJ ID 6 61- 22 2 TCHF 0 UNLJCKED WJ GP 7 61- 22 3 TCHF 0 UNLJCKED WJ GP ADM.STATE JP.STATE -------------------------------------- BCF-001 UNLJCKED WJ SEG-003 ADIPALA3 BTS-003 ADIPALA3 UNLJCKED WJ TRX-012 EDGE UNLJCKED WJ BCSU-0 TRA NJRM HRS Y PREF N GTRX Y FREQ 17 TSC 1 FRT 0 (REGULAR) LEV N (NJT USED) BFREQ - BTSC - BFRT - BLEV - DAL N (NJT USED) LEVD - 77 dBm BDAL - MA FREQUENCY LIST 32 SIGN 0 1 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Test Call D-CH TELECJM LINK SET 27 T001C RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE JP.STATE CH.STATUS ------------------------------------------------------------------------------ 0 61- 23 0 TCHF 0 UNLJCKED WJ ID 1 61- 23 1 TCHF 0 UNLJCKED WJ ID 2 61- 23 2 TCHF 0 UNLJCKED WJ ID 3 61- 23 3 TCHF 0 UNLJCKED WJ ID 4 61- 24 0 TCHF 0 UNLJCKED WJ ID 5 61- 24 1 TCHF 0 UNLJCKED WJ ID 6 61- 24 2 TCHF 0 UNLJCKED WJ ID 7 61- 24 3 TCHF 0 UNLJCKED WJ ID CJMMAND EXECUTED 2 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential CHECKNG ALARM NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Checking Alarm ZEOL: LIST LRMS CURRENTLY ON With the EOL command you print the BTS aIarms that are currentIy on EJL [ <BCF identification> ... | <all> def ] : [[ NR = <BTS alarm number> | <all> def ] | [ CLS = <alarm class> | <all> def ]] ; ExampIe : Check alarm currently on at BCF=01 at BSC Baturaden L:1:; TS ALARM LISTING BATURADN BCF-001 NVIR 2005-02-23 00:13:04.31 *** ALARM (10201) 7412 TRNAL AL 12 L VLTAG BATTRY ND F BTS ALARM LISTING CMMAND CUTD NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Locking and Waiting for ATP (Acceptance Test Protocol/Procedure) 5 NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Locking The Site and Wait for ATP The purpose of ntegration is for : 1. configuring interconnection between network elements 2. customising the radio network parameters . ready for commercial use . ready for calls (circuit and packet switched) After integration process done successfully, then the site should be locked again (BCF-BTS-TRX's) and waiting for ATP (Acceptance Test Protocol/Procedure). NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Locking The Site and Wait for ATP To unlock the site using RNW Manager: 1. Open RNW Manager application if not opened yet from Top Level User nterface FUtils FNetwork Configuration Mgmt F RNW Manager. 2. Expand the browser on the left for the destination BSC and the BCF which you want to unlock . Highlight the BCF then press Select . On the menu, click State F lock NOKA ntegration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential Locking The Site and Wait for ATP 5. SeIect UnIock chiIdren aIso to unIock the BTSs and TRXs then select OK.