This document describes a liquid level monitoring system that uses electrodes to maintain the liquid level within a specific range. It uses two measuring electrodes and one reference electrode to detect the resistive changes at different liquid levels. The output relay is energized when the maximum liquid level is exceeded and de-energized when the level falls below the minimum level. It also describes the system's sensitivity adjustment potentiometer and LED indicators for power and relay status.
This document describes a liquid level monitoring system that uses electrodes to maintain the liquid level within a specific range. It uses two measuring electrodes and one reference electrode to detect the resistive changes at different liquid levels. The output relay is energized when the maximum liquid level is exceeded and de-energized when the level falls below the minimum level. It also describes the system's sensitivity adjustment potentiometer and LED indicators for power and relay status.
This document describes a liquid level monitoring system that uses electrodes to maintain the liquid level within a specific range. It uses two measuring electrodes and one reference electrode to detect the resistive changes at different liquid levels. The output relay is energized when the maximum liquid level is exceeded and de-energized when the level falls below the minimum level. It also describes the system's sensitivity adjustment potentiometer and LED indicators for power and relay status.
0 1 5 7 Liquid level monitoring Liquid level monitor CM-ENS Liquid level monitor CM-ENS Liquid level monitor CM-ENS Liquid level monitor CM-ENS Liquid level monitor CM-ENS Using this type of liquid level monitor the liquid level can be maintained within a specific range, limited by a maximum level and a minimum level. Using two measuring electrodes (MIN and MAX) and one reference electrode C the resistive change at different liquid levels can be acquired. First, the output relay is de-energized. It energizes if the maximum permitted liquid level is exceeded. It de-energizes again if the level falls below the minimum permitted liquid level. Sens. (sensitivity) Potentiometer for adjusting the response sensitivity Yellow LED - relay status Green LED - supply voltage Filling Draining