The Evolution Model EL Sliding Sleeve is a high pressure down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.
The device uses Viton O-rings as well as replaceable upper and lower easy-to-replace Vee seals. The Vee seals can be of various elastomer types. The standard seal material is a carbon graphite/Teflon® composition.
- See more at: http://eotools.com/index.php/component/virtuemart/42/4/flow-control/el-sliding-sleeve-detail.html#.VEa9nPldWCk
The Evolution Model EL Sliding Sleeve is a high pressure down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.
The device uses Viton O-rings as well as replaceable upper and lower easy-to-replace Vee seals. The Vee seals can be of various elastomer types. The standard seal material is a carbon graphite/Teflon® composition.
- See more at: http://eotools.com/index.php/component/virtuemart/42/4/flow-control/el-sliding-sleeve-detail.html#.VEa9nPldWCk
The Evolution Model EL Sliding Sleeve is a high pressure down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.
The device uses Viton O-rings as well as replaceable upper and lower easy-to-replace Vee seals. The Vee seals can be of various elastomer types. The standard seal material is a carbon graphite/Teflon® composition.
- See more at: http://eotools.com/index.php/component/virtuemart/42/4/flow-control/el-sliding-sleeve-detail.html#.VEa9nPldWCk
2014 Evolution Oil Tools Inc. All rights reserved.
www.eotools.com Toll Free: 1-800-265-TOOL EL-SS-TDS-Rev-B (EL Sliding Sleeve) March 2014 Flow Control Tools
EL Sliding Sleeve Up shifting sliding sleeve
Applications Displacing kill or completion fluid. Allowing multiple zones to produce up one tubing string. Selective testing of individual zones. Selective stimulation of individual zones. Circulating to kill the well. Gas lifting the well. Landing a blanking plug in the profile in the upper sub to shut in the well, test the tubing, or test the sleeve itself. Circulating inhibitors or methanol.
Features & Benefits Pin by pin thread configuration. All sliding sleeves are H2S service ready. O-ring and Vee seal sealing mechanism Do not wrench on the outer housing.
Baker is a registered trademark of Baker Hughes Inc.
Description The Evolution Model EL Sliding Sleeve is a down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.
The closing sleeve has bonded upper seals to ensure the integrity of the seals for the extended periods of time downhole. They can be of various elastomer types.
The upper sub has a selective EF landing nipple profile machined into it to allow for the proper shifting of the sleeve and to serve as a receptacle for other flow control devices such as blanking plugs and separation tools.
The Evolution Model ED-2 Shifting Tool is used to shift the EL Sliding Sleeve open and closed. The sleeve is designed so that normal wireline activities will not open or close the sleeve inadvertently. Upward jarring opens the sleeve and download jarring closes it.
EL Sliding Sleeve
www.eotools.com Specifications Part Number Tubing OD Seal Bore Min. OD Inch mm Inch mm inch mm 100254 2.375 60.36 1.781 45.24 2.910 73.82 100255 1.812 46.02 100253 1.875 47.63 100256 2.875 73.02 2.250 57.15 3.410 86.52 100257 2.313 58.72 100259 3.500 88.90 2.750 69.85 4.500 114.3 100260 2.813 71.42
This document is uncontrolled when printed. 2014 Evolution Oil Tools Inc. All rights reserved. www.eotools.com Toll Free: 1-800-265-TOOL EL-SS-TDS-Rev-B (EL Sliding Sleeve) March 2014 Flow Control Tools
CANADA #3, 1820 30 th Ave NE Calgary, Alberta T2E 7M5 Toll Free: 1-800-265-TOOL (8665) Main: 403-243-1442 Fax: 403-258-2614
6415A - 63 St. Close Lloydminster, Alberta T9V 3B5 Tel: 780-522-8294 Fax: 780-875-6337