# Selection location min to max: -1230, 3, -606 to -1184, 130, -560 # Created for 3D printing # Cost estimate for this model: # if made using the white, strong & flexible material: $ 241.05 # if made using the full color sandstone material: $ 131.33 # For colored sandstone printer, minimum wall is 2 mm, maximum size is 38 x 25 x 20 cm # Units for the model vertex data itself: millimeters # world dimensions: 9.40 x 25.60 x 9.40 cm # in inches: 3.70 x 10.08 x 3.70 inches # each block is 2.00 mm on a side, and has a volume of 8 mm^3 # sum of dimensions: 444 mm # volume is 171.104 cm^3 # surface area is 1744 cm^2 # block density: 8% of volume # 43195 vertices, 43600 faces (87200 triangles), 21388 blocks # block dimensions: X=47 by Y=128 (height) by Z=47 blocks # File type: Export solid material colors only (no textures) # Make Z the up direction instead of Y: YES # Center model: YES # Export lesser blocks: no # Individual blocks: no # Rotate model 0.000000 degrees # Scale model by making each block 2 mm high # Data operation options: # Fill air bubbles: no; Seal off entrances: no; Fill in isolated tunnels in ba se of model: no # Connect parts sharing an edge: YES; Connect corner tips: YES; Weld all share d edges: no # Delete floating objects: trees and parts smaller than 16 blocks: YES # Hollow out bottom of model, making the walls 2 mm thick: YES; Superhollow: Y ES # Melt snow blocks: no # Debug: show separate parts as colors: no # Debug: show weld blocks in bright colors: no # Cleanup processing summary: # Solid parts: 1 # Total solid parts merged: 1 # Number of edge passes made: 1 # Edges found to fix: 36 # Weld blocks added: 32 # Tip blocks added: 0 # Floating parts removed: 0 # In these floaters, total blocks removed: 0 # Blocks removed by hollowing: 0 # Blocks removed by further super-hollowing (i.e. not just vertical hollowing) : 0