This document provides product specifications for ETD29 cores, coil formers, and mounting parts from Philips Components. It includes:
1) Effective core parameters and properties of ETD29 core sets under power conditions, listing core factor, effective volume, length, area, minimum area, mass and magnetic properties.
2) Dimensions and material specifications for the 13-pin ETD29 coil former, along with winding data for number of sections, winding area, minimum width and average length of turn.
3) A mounting clip for ETD29 cores made of stainless steel is shown, with dimensions provided.
This document provides product specifications for ETD29 cores, coil formers, and mounting parts from Philips Components. It includes:
1) Effective core parameters and properties of ETD29 core sets under power conditions, listing core factor, effective volume, length, area, minimum area, mass and magnetic properties.
2) Dimensions and material specifications for the 13-pin ETD29 coil former, along with winding data for number of sections, winding area, minimum width and average length of turn.
3) A mounting clip for ETD29 cores made of stainless steel is shown, with dimensions provided.
This document provides product specifications for ETD29 cores, coil formers, and mounting parts from Philips Components. It includes:
1) Effective core parameters and properties of ETD29 core sets under power conditions, listing core factor, effective volume, length, area, minimum area, mass and magnetic properties.
2) Dimensions and material specifications for the 13-pin ETD29 coil former, along with winding data for number of sections, winding area, minimum width and average length of turn.
3) A mounting clip for ETD29 cores made of stainless steel is shown, with dimensions provided.
ETD cores and accessories ETD29 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT (I/A) core factor (C1) 0.947 mm 1 V e effective volume 5470 mm 3 I e effective length 72 mm A e effective area 76 mm 2 A min minimum area 71 mm 2 m mass of core half 14 g Fig.1 ETD29 core half. Dimensions in mm. handbook, halfpage MGC259 11 0.3 15.8 0.2 30.6 22 0 1.6 9.8 0 0.6 9.8 0 0.6 1.4 0 Core halves Clamping force 40 20 N. Gapped cores are available on request. Properties of core sets under power conditions GRADE A L (nH)
e AIR GAP (m) TYPE NUMBER 3C30 1900 25% 1500 0 ETD29-3C30 3C85 2350 25% 1850 0 ETD29-3C85 3C90 2350 25% 1850 0 ETD29-3C90 3F3 2200 25% 1700 0 ETD29-3F3 GRADE B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 C f = 25 kHz; = 200 mT; T = 100 C f = 100 kHz; = 100 mT; T = 100 C f = 400 kHz; = 50 mT; T = 100 C 3C30 360 0.55 0.60 3C85 320 0.80 0.90 3C90 330 0.55 0.60 3F3 320 0.65 1.1 B
1997 Nov 21 356
Philips Components Product specication ETD cores and accessories ETD29 COIL FORMER General data 13-pins ETD29 coil former Winding data for 13-pins ETD29 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass-reinforced, ame retardant in accordance with UL 94V-0; UL le number E45329(R) Pin material copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated Maximum operating temperature 155 C, IEC 85 class F Resistance to soldering heat IEC 68-2-20, Part 2, Test Tb, method 1B, 350 C, 3.5 s Solderability IEC 68-2-20, Part 2, Test Ta, method 1 NUMBER OF SECTIONS WINDING AREA (mm 2 ) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) TYPE NUMBER 1 90 19.4 53 CPH-ETD29-1S-13P Fig.2 ETD29 coil former; 13-pins. Dimensions in mm. handbook, full pagewidth 25.4 25.4 max. 3.4 5.08 0.7 5.08 30.48 35.2 max. 19.4 min. 35.2 max. 1.6 +0.15 0 10 +0.3 0 21.2 0 0.25 21.8 0 0.2 11.8 0 0.25 CBW281 1997 Nov 21 357 Philips Components Product specication ETD cores and accessories ETD29 MOUNTING PARTS General data ITEM REMARKS FIGURE TYPE NUMBER Mounting clip material: stainless steel 3 CLI-ETD29 handbook, halfpage MGC261 8.7 18 33.8 min 8.3 0.4 Fig.3 Mounting clip for ETD29. Dimensions in mm.