Professional Documents
Culture Documents
AutoCAD 2011
AutoCAD 2011
AutoCAD 2011
Autodesk
AutoCAD 2011
2
3 Solid Modeling Surface Modeling
2
()
138
Document
15
Explore
34
Multileader
153
Learning Resources
46
Table
156
Autodesk Seek
48
160
Install Software
51
161
AutoCAD 2011
52
Layer Tools
171
User Interface
68
172
Drawing Setting
77
Layer
173
78
Plot Tools
181
79
Paper Space
182
89
(Draw)
90
(Modify)
104
121
Annotation
133
(Notes)
134
AutoCAD 2011
AutoCAD 2011
User Interface
AutoCAD 2011
Drawing Windows
Workspace Workspace
Save Save As Quick Access Toolbar
Navigation
Autodesk Steering Wheels, View Cube Show Motion Well, Zoom, Pan
Orbit Navigation CUI Property
UCS
X Y Z 3D Gizmos
Clarity Consistency
The Ribbon
Ribbon Pull-down
Visual Styles
Object Visibility
10
Hide Objects
11
Object Selection
Select Similar
12
Select Similar
2
text, Mtext,
Leaders, Mleaders, Dimensions, Tolerances, Tables Multilines
13
Object Creation
Add Selected
Action Recorder
14
Macro Macro
Document
AutoCAD 2011 Automation, Manage
Parametric Constraint
GEOMCONSTRAINT DIMCONSTRAINT
GEOMCONSTRAINT Perpendicular
GCPERPENDICULAR
Constraint
Parameters Manager Visual Effects Selection
Options ( Dashes Thickened )
Geometric Dimension Constraint Parametric Constrain
Geometry
Geometric Constraints
Constrain
Constrain
Geometric Constraint Setting
Coincident
Midpoint, Endpoint, Center, Node Insertion
AutoCAD
Coincident
Insertion Block
Coincident 2 Block
Coincident
Point to Point Object Snap Nearest
Coincident
Object Snap Nearest
16
AutoCAD 2011
Parallel, Perpendicular, Collinear, Horizontal
Vertical
17
Equal Equal Equal
Line Polyline
Constraint Bars
Constraint Bars Windows,
Crossing Fence Geometric
Constraint Setting () Show constraint bars when
objects are selected Constraint Bars
18
19
Dimensional Constraints
DIMCONSTRAINT Convert
Dimensional Constraints
Dimensional Constraints
Dimensional Constraints
fx
Dimensional Parametric
Dimensional Constraints Show/Hide
Dimensional Constraints
Filter
Parameters Manager
Filter Parameter
Transparency
21
Transparency
Transparency
Properties Palette, Quick Properties Ribbon CETRANSPARENCY
Transparency Property
22
23
Transparency
Lineweight Command Line:
TRANSPARENCYDISPLAY
Transparency Plot and Page Setup
Transparency (PLOTTRANSPARENCY)
Ribbon Hatch Creation
Ribbon
Hatch Editor
24
Pick Point
25
AutoCAD 2011
(Stretch) (Move)
Ctrl
Hatch
Hatch
26
Hatchs Layer
Color, Pattern
Send Hatches to Back, Bring Text to Front Bring Dimension to Front
MIRRHATCH Mirror
MIRRHATCH 0
MIRRHATCH 1
27
Polyline
CTRL
AutoCAD 2011 Polyline
CTRL Polyline
28
Spline
Spline Spline
Spline Fit
Tolerance ( (Close) Spline Fit Point)
Knot Parameterization ( Fit Point) Degree
CV Spline Spline
29
External Reference
30
Scale List
31
32
33
Explore
AutoCAD 2011 3 2
3D Modeling Workspace
3D Object Snap
34
Solid Modeling
Surface Modeling
35
36
Trim Surface
Edit Panel Untrim (Command Line: UNTRIM)
Trim Surface
37
38
Analysis Tools
Surface Analysis
Surface Ribbon Zebra
Curvature
Draft
Analysis Options Analysis
3D Modeling Tab Surface Analysis
Analysis
39
Consistent Materials
40
41
Material Editor
Material Browser
Mesh Modeling
42
Merge Mesh 2
43
Point Cloud
Input Files
Output files
Ambercore
.LAS
.ISD
Lightweight Engine
44
45
Learning Resources
AutoCAD 2011 Welcome Screen
Welcome Screen Key
Topics AutoCAD Welcome Screen
Whats New, Learning Path AutoCAD Online Help
New Features Workshop
Help InfoCenter
46
47
Autodesk Seek
Autodesk Seek Web Service
Autodesk Design Application
Manufacture 1,200
35,000 Autodesk Seek DWG 100,000
Autodesk Seek
48
Upload AutoCAD
Autodesk Seek Share with Autodesk Seek Output
49
Shared Designs
50
AutoCAD 2011
AutoCAD 2011
51
AutoCAD 2011
AutoCAD 2011
AutoCAD 2011
2 32-bit 64-bit
1.
Microsoft Windows 7 Enterprise, Ultimate, Professional, Home Premium
Microsoft Windows Vista Enterprise, Business, Ultimate, Home Premium
(SP1 ) Microsoft Windows XP Professional or Home edition (
)
2. Internet Explorer 7.0
3. (CPU)
Windows Vista Windows 7: Intel Pentium 4 AMD Athlon dualcore processor, 3.0 GHz SSE2 technology
Windows XP: Intel Pentium 4 AMD Athlon dual-core processor, 1.6 GHz
SSE2 technology
4. (RAM) 2 GB RAM
5. 2 GB
6. 1024 x 768 True Color
7. DVD ROM
8. 3
52
1. DVD-ROM
Setup.exe DVD-ROM( DVD 1
32 bit 64 bit) AutoCAD
2011 Install Products
53
54
55
56
5.
Configure
57
58
59
8. Service Pack (
Internet) Service pack
Next
60
61
62
63
13. Install
64
14.
65
15. ()
66
67
AutoCAD 2011
AutoCAD 2011
68
AutoCAD 2
AutoCAD
2 AutoCAD
Open AutoCAD
AutoCAD 2011
69
AutoCAD 2011 (2D Drafting & Annotation)
1. Graphic Windows:
2. Cross Hair:
Graphic Windows
3. Command Line:
4. Drawing Tools: SNAP,
GRID
5. Coordinate Display: Cross Hair
X, Y, Z
6. Model & Layout Tab : Model Layout
Model
Layout
70
1
2
3
4
5
6
7
8
9
10
1. New: Template
2. Open:
DGN
3. Save: DWG
4. Save As: DWG
Template (DWT) Drawing Standard (DWS)
DXF
71
10. Close:
11. Option:
12. Exit AutoCAD: AutoCAD
Ribbon
InfoCenter AutoCAD
Subscription New
Feature Workshop, Welcome Screen
Quick Properties
Quick Views Layouts Model Layout
Model Layout
72
73
Function Keys
AutoCAD
Command Line
F1 (Help)
74
AutoCAD 2011
AutoCAD
AutoCAD
:
: Enter
(View Mouse): Zoom
(Zoom
In) (Zoom Out)
(Pan)
(Zoom Extent)
75
Contents:
AutoCAD Contents
3
Concept:
Procedure:
Quick Reference:
Index: A Z
Search:
76
AutoCAD 2011
77
AutoCAD 2011
AutoCAD
AutoCAD
AutoCAD
1. Absolute Coordinate ( X, Y) (Origin
point) X=0, Y=0
Command Line: ( Enter)
Specify first point: 50,50 ( A Enter)
Specify next point or [Undo]: 150,50 ( B Enter)
2. Relative Coordinates (@X,Y) = (@X,Y)
( 0,0 )
Command Line: ( Enter)
Specify first point: 50,50 ( A Enter)
Specify next point or [Undo]: @100,0 ( B Enter)
Specify next point or [Undo]: @0,20 ( C Enter)
3. Polar Coordinates (@ Distance < Direction)
0,0
Y=90
Command Line: ( Enter)
Specify first point: 50,50 ( A Enter)
Specify next point or [Undo]: @100<0 ( B Enter)
-X=180
Specify next point or [Undo]: @20<90 ( C Enter)
-Y=270
78
X=0
(Units) (Drawing
Limits) Drafting Setting ( (Grid) (Snap))
(Drawing Limits)
A4 (12x9 297x210 .)
A4 Zoom All
Drawing Limits
1. Command Line
Command: '_limits
Reset model space limits:
Specify lower left corner or [ON/OFF] <0.00,0.00>: 0,0 Enter
Specify upper right corner <420.0000, 297.0000>: 297,210 Enter
79
(Unit)
2
1
Units
1. Menu Browser Drawing Utility Units Command Line :
units
2. Drawing Units
3. Length Type Decimal Precision 2
6. OK
80
Drafting Setting
Drafting Setting Grid
Snap
(Grid)
F7
(Snap)
F9
1. Snap Setting
2. Drafting Setting Snap and Grid Tab
3. Snap spacing Snap X
spacing: 10
Snap Y spacing: 10
81
4. Grid spacing
Grid X spacing: 10
Grid Y spacing: 10
5. OK
Isometric Snap Type
Isometric Snap F9
F7
Object Snap
Object Snap Osnap
Midpoint Endpoint Center
Object snap
1. Line SHIFT
82
(Line) Arc
2. Osnap-Midpoint
(Line) Arc
3. Osnap-Intersection
(Line)
4. Osnap-Center
83
5. Osnap-Quadrant
0, 90, 180 270
Ellipse
6. Osanp-Perpendicular
(Line)
7. Osnap-Tangent
8. Osnap-Node
Point
9. Osnap-Apparent Intersection
10. Osnap-Nearest
Crosshair
84
85
OSNAP
(Status Bar) OSNAP
Function Key F3: F3 /
OSNAP Command Line <snap on> <snap off>
<Ctrl+F>: <Ctrl+F> /
OSNAP
ORTHO
0, 90, 180, 270 360
Ortho
(Status Bar) ORTHO
Function Key F8: F8 /
OSNAP Command Line <ortho on> <ortho off>
86
1. Pick
87
88
AutoCAD 2011
AutoCAD 2011
89
AutoCAD 2010
(Draw)
Draw 2
Line
Home tab Draw panel Line.
Command: _line ( Line)
Specify first point: ()
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Continue :
Close :
Undo : 1
90
Construction Line
Home tab Draw panel
Construction Line.
Specify a point: 2
Hor (Horizontal): 1
Ver (Vertical): 1
Ang (Angle): X
Bisect:
2
Offset:
Command: _xline
Specify a point or [Hor/Ver/Ang/Bisect/Offset]:
Specify through point:
Ray
Construction Line Construction Line
Home tab Draw panel Ray
Command: _ray
Specify start point:
Specify through point:
91
Polyline
Command: _pline
Specify start point:
Current line-width is 0.0000
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]: a
Specify endpoint of arc or
[Angle/CEnter/CLose/Direction/Halfwidth/Line/Radius/Second pt/Undo/Width]:
Specify endpoint of arc or
[Angle/CEnter/CLose/Direction/Halfwidth/Line/Radius/Second pt/Undo/Width]: l
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]: c
92
Line:
Width:
Close:
Length:
Undo:
93
Polygon
3 1024
Home
tab _polygon
Draw panel Polygon.
Command:
Enter number of sides <4>: Polygon
Specify center of polygon or [Edge]:
Enter an option [Inscribed in circle/Circumscribed about circle] <I>: I
Inscribed in circle
Specify radius of circle:
Inscribed in circle:
I Command
Circumscribed about Circle:
C
Command
Edge:
Inscribed in circle
94
Edge
Rectangle
2
Home tab Draw panel Rectangle.
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]:
Chamfer: (Chamfer)
** (Chamfer) RECTANG
Elevation: 3
** (Elevation) RECTANG
Fillet: (Fillet) 4
** (Fillet) RECTANG
Thickness: 3
** (Thickness)
RECTANG
Width:
** (Width) RECTANG
95
Area:
Dimensions:
Rotation:
Arc
11 5
96
Circle
6
Home tab Draw panel Center, Radius.
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]:
Center, Radius:
Center, Diameter:
2 Points: 2
3 Points: 3
Tan, Tan, Radius:
2
Tan, Tan, Tan:
3
97
Revision Cloud
Home tab Draw panel Revision Cloud
Command: REVCLOUD
Minimum arc length: 0.5000 Maximum arc length: 0.5000 Style: Normal
Specify start point or [Arc length/Object/Style] <Object>:
Arc Length:
Object: Revision Cloud
Normal
Calligraphy
98
Spline
Home tab Draw panel Spline.
Command: _spline
Current settings: Method=Fit Knots=Chord
Specify first point or [Method/Knots/Object]:
Enter next point or [start Tangency/toLerance]:
Enter next point or [end Tangency/toLerance/Undo/Close]:
Enter next point or [end Tangency/toLerance/Undo/Close]:
Enter next point or [end Tangency/toLerance/Undo/Close]:
Method Spline 2
Fit point: Spline Fit
99
Control Vertices
Degree (Bends) 3 1, 2 3
Close:
Start Tangency:
end Tangency:
100
Ellipse
Home tab Draw panel Center.
Command: _ellipse
Specify axis endpoint of ellipse or [Arc/Center]: _c
Specify center of ellipse: (1)
Specify endpoint of axis: (2)
Specify distance to other axis or [Rotation]: (3)
Command: _ellipse
Specify axis endpoint of ellipse or [Arc/Center]: _a
Specify axis endpoint of elliptical arc or [Center]: (1)
Specify other endpoint of axis: (2)
Specify distance to other axis or [Rotation]: (3)
Specify start angle or [Parameter]: (4)
Specify end angle or [Parameter/Included angle]: (4)
101
Point
Point
Point Style
Home Tab Utilities Panel Point Style
102
Wipeout
Polyline F8
Home Tab Draw Panel Wipeout
Command: _wipeout
Specify first point or [Frames/Polyline] <Polyline>:
Specify next point: (2)
Specify next point or [Undo]: (3)
Specify next point or [Close/Undo]: (4)
Specify next point or [Close/Undo]: C
103
(Modify)
Modify
Erase
Home Tab Modify Panel Erase
Command: ERASE
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: Enter
104
Copy
105
Mirror
106
Offset
107
Array
X
Y 2
Home Tab Modify Panel Array
Rectangular Array :
108
Polar Array:
3
109
Move
110
Rotate
111
Scale
Home Tab Modify Panel Scale
Command: _scale
Select objects: Specify opposite corner: 1 found
Select objects: Enter
Specify base point:
Specify scale factor or [Copy/Reference] <1.0000>: .5
Scale
Scale factor : 100
150 1.5
Copy :
Reference :
112
Stretch
Home Tab Modify Panel Stretch.
Command: _stretch
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 1 found
(1) (2)
Select objects: Enter
Specify base point or [Displacement] <Displacement>: (3)
Specify second point or <use first point as displacement>: (4)
113
Trim
Home Tab Modify Panel Trim.
Command: Trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: ()
Select objects: Enter
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: ()
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: Enter
114
Extend
Home tab Modify panel Extend.
Command: _extend
Current settings: Projection=UCS, Edge=None
Select boundary edges ...
Select objects or <select all>: 1 found
Select objects: Enter
Select object to extend or shift-select to trim or
[Fence/Crossing/Project/Edge/Undo]:
Select object to extend or shift-select to trim or
[Fence/Crossing/Project/Edge/Undo]:
Select object to extend or shift-select to trim or
[Fence/Crossing/Project/Edge/Undo]: Enter
115
Break
2
116
Join
Break Enter
Home Tab Modify Panel Join
Command: _join
Select source object:
Select lines to join to source: 1 found
Select lines to join to source: Enter
1 line joined to source
117
Chamfer
Home Tab Modify Panel Chamfer
(TRIM mode) Current chamfer Dist1 = current, Dist2 = current
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]:
Use an object selection method or enter an option
Chamfer
Polyline: 2D polyline.
Distance:
Note 0
Angle:
2
Trim:
NoteTRIMMODE1 0
TRIMMODE1 2
0
118
Fillet
Home Tab Modify Panel Fillet
Current settings: Mode = current, Radius = current
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Use an object selection method
or enter an option
Fillet
Polyline : 2D polyline
Radius :
Trim :
NoteTRIMMODE 1 0
TRIMMODE1 2
0
119
Explode
Polyline, Polygon (Block)
120
AutoCAD 2011
121
AutoCAD 2011
Draw Modify
1. Template acadiso.dwt
2. A4 (297X210 mm.)
Zoom All
122
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0,0
Enter
Specify upper right corner <420.0000,297.0000>: 297,210
Enter
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a
Regenerating model.
3. 50 mm. 180,100
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 180,100
Enter
Specify radius of circle or [Diameter]: d
Enter
Specify diameter of circle: 50 Enter
4. 24 mm.
Command:Circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: _cen of Osnap
Center
Specify radius of circle or [Diameter] <25.0000>:
d Enter
Specify diameter of circle <50.0000>: 24 Enter
123
5. 2 125 mm.
Command: _copy
Select objects: Specify opposite corner: 2 found 2
Select objects: Enter
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Osnap
Center
Specify second point or <use first point as displacement>: <Ortho on>
125 Enter
Specify second point or [Exit/Undo] <Exit>:
6. Offset 4 mm.
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer]<Through>: 4
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
124
8. Trim
Command: Trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: 1 found
Select objects: 1 found, 2 total
Select objects:
Select object to trim or shift-select to extend
or[Fence/Crossing/Project/Edge/eRase/Undo]:
125
9. Mirror
24
Command: _mirror
Select objects: Specify opposite corner: 1 found
Specify first point of mirror line: Osnap Center
Specify second point of mirror line: Osnap Center
Erase source objects? [Yes/No] <N>: N
11. 180 0 Osnap
12.
14.
Trim
15. Offset 3 mm.
0 180
127
16. 4 80 mm.
Trim
128
19.
120 mm.
21. Erase
22.
Extend
129
ACAD_ISO02W100
Linetype Load
Peoperties Linetype
Other. Linetype
Linetype Manager Load
130
131
1. 13 mm. 4
2. Properties Properties
Properties
3. ToolPalettes Properties Line(4)
4 General Linetype
132
AutoCAD 2011
Annotation
133
Annotation
Annotation
(Notes)
AutoCAD 2011
Multiline Text
TextEditor
Word
Home Tab Annotation Panel Multiline Text
Text Editor
Word Notepad
134
Justify :
[Align/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BR]
135
Style :
Standard ? *
Command: _text
Current text style: "Standard" Text height: 0.2000 Annotative: No
Edit Text
Text Style
Text Style
136
Text Style
New:
New Text Style
Rename:
Rename
Delete:
Front Name:
Annotative:
Match text orientation to layout: View port
Layout
137
Height:
Upside down: 180
Dtext Single line Text
Backwards:
Vertical: Dtext Single line
Text
Width Factor:
Oblique Angle:
Dimension
Linear dimensions Horizontal, Vertical, Aligned, Rotated,
Baseline, Continued (Chained)
138
Linear
1.
2. (1) ENTER
3. (2)()
4.
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Mtext
Text Editor
Text
Dimension
Style Text
Angle
180 180
Horizontal
Vertical
139
Rotated
Object Selection
Aligned
1.
2. (1) ENTER
3. (2) ()
4. (3)
Angular
1.
2. (1)
3. (2)
4. (3)
140
Baseline
1.
2. Linear 1
3. (2)
4. (3)
5. Baseline (4)
6. (5) (6) Enter
Continue
1.
2. Linear 1
3. (2)
4. (3)
5. Continue (4)
6. (5) (6) Enter
141
Arc Length
1.
2. (1)
3. (2)
Diameter
1.
2. (1)
3. (2)
Jogged Linear
1.
2. Jogged Linear(1)
3. (2)
4. (3)
5.
142
Dimension Space
1.
2. (1)
3. (2)
4.
Dimension Break
1.
2. Break (1)
3. (2)
4. Enter
143
Radius
1.
Home Tab
Annotation Panel
Radius
2. (1)
3. (2)
( Dimension Style)
Home Tab Annotation Panel Dimension Style
144
145
User for:
OK
Modify Dimension Style:
Line Tab:
146
147
Text Tab:
Text appearance:
Text placement: Dimension Line
Text alignment:
148
Fit Tab:
149
Linear dimension:
Measurement scale:
Zero suppression:
80.000 80.0
Angular dimension:
150
151
Tolerances Tab:
152
Multileader
Text Edit Panel
Multileader Multileader
Add Leader Leader Multileader
Remove Leader Leader Multileader
Align Multileader Multileader
Collect Multileader Multileader
Multileader 3
153
154
Block
Mtext
None
155
Table
AutoCAD
Insert Table
Microsoft Excel
Home Tab Annotation Panel Table
Table Style
156
157
Table Style
Table Style
Current Style: Standard
Styles:
List:
All styles
Styles in use
Preview of: Style
Set Current:
New:
Modify:
158
Starting table:
General:
Cell Styles: 3 Data, Title, Header
General Tab:
Text Tab:
Borders Tab:
Tab
159
AutoCAD 2011
160
Section
Hatch
Gradient Hatch
Gradient
Hatch
(Section Lines)
Home Tab Draw Panel Hatch
Hatch Hatch Creation
Boundaries Panel
161
Pack Points:
Properties Panel
Hatch Type: 4
Solid, Gradient, Pattern User-defined
Pattern:
Properties
162
User-defined: (Angle)
(Spacing) Hatch Spacing,HatchAngle, Hatch
Color
Properties
Gradient: Gradient
Color 1 Gradient Color 2 Properties
Origin Panel
UCS
Set Origin:
Bottom Left:
Bottom Right:
Top Left:
Top Right:
Center:
163
Associative: Stretch
Do Not Assign:
Send to Back:
Send to Front:
Send Behind Boundary:
164
165
Enter Close Hatch
Creation
166
Gradient
9
Hatch
Home Tab Draw Panel Gradient
Color
One color () Two color ()
Gradient Color 1 Gradient Color
2 Gradient Tint and Shade
Properties
167
Hatch Gradient
Hatch Gradient
Hatch Edit Panel
MIRROR HATCH
Mirror
Hatch Mirror
Command Line
Command: mirrhatch Enter
Enter new value for MIRRHATCH <0>: 1 Enter
Mirror
MIRRHATCH =0
Mirror
MIRRHATCH =1
168
1. Select a Vertex:
2. Select an Edge:
3. Select an Edge:
4. Location Grip:
5. Island Location:
6. Island Stretch:
Tooltip
169
Ctrl Tooltip
170
AutoCAD 2011
171
AutoCAD
AutoCAD
AutoCAD
Layer
Layer Layer
Objects Blue Continue
Layer Hidden Red Hidden
Dashed
Layer Annotations
172
Layer
Layer Layer Properties Manager Layer
Control Layer Layer
173
Previous
Previous Layer Layer
Home tab
Layer
Layer
Layer
Layer
Layer
Layer
Layer
Layer Color, Linetype, Lineweigth
174
Linetype:
Continuous
Load
Lineweight:
0.00 mm. 2.11 mm.
0.25 mm.
Layer Status
Layer
Icon
Status
ON Layer
Plot
OFF Layer
Regenerate
Freeze Layer
Plot
Thaw Layer
Regenerate
175
Layer list
Layer Layer Panel
Layer
Layer Layer
176
Layer
Properties
Layer Properties Ribbon
Layers Panel
Layer
Layer Layer
177
Properties Panel
Properties
Color, Linetype Lineweight
Properties
Properties
Properties
General
Layer
Geometry
178
Quick Properties
Quick Properties
Customize User Interface (CUI)
Quick Properties Quick Properties Ctrl + Shift + P
Quick Properties
179
180
AutoCAD 2011
181
182
Layout
Layout Layout
Model Layout
3
Model
183
Layout
Layout
Layout Layout Layout
Layout
Layout
New Layout: Layout
Layout
From template: Layout Template
Template
Delete: Layout
Rename: Layout Layout
Move or Copy: Layout
Select All Layouts: Layout Layout
Activate Previous Layout: Layout
Activate Model Tab: Model
184
185
New:
Modify:
Selected page setup details
Device name: Device
Plotter:
Plot size:
Where:
Description: Modify Page Setup
Display:
Extents:
Limit Layout: Model Layout
Model Limit
Layout
Windows:
Plot scale
Drawing Orientation
Preview
Preview
Page Setup-Layout1 OK Page Setup Manager
187
Close
Title Block
Title Block
Title Block Layout
MVSETUP Command Line
Command: mvsetup Enter
Initializing...
Enter an option [Align/Create/Scale viewports/Options/Title block/Undo]:
Title block T Enter
Enter title block option [Delete objects/Origin/Undo/Insert] <Insert>:
Insert Enter Title block
Available title blocks:...
188
0: None
1: ISO A4 Size (mm)
2: ISO A3 Size (mm)
3: ISO A2 Size (mm)
4: ISO A1 Size (mm)
5: ISO A0 Size (mm)
6: ANSI-V Size (in)
7: ANSI-A Size (in)
8: ANSI-B Size (in)
9: ANSI-C Size (in)
10:
11:
12:
13:
189
Layout
Layout A4
A4
Layout Page
Setup Manager
1. Layout Layout 1
Page Setup Manager
2. Page Setup Manager Modify
3. Page Setup-Layout1 Drawing Orientation
190
191
5. Page Setup-Layout1
Preview
Preview
192
193
Scale Viewport
1:1
Viewport
1. Viewport
4
2. Quick Properties
3. Viewport Standard Scale
1:1
4. Viewport
5.
6. Esc
194
Pan
195
AutoCAD
Layout
AutoCAD Plot Layout
Layout Layout Tab Plot
Output tab Plot panel Plot
Printer/plotter
Paper Size
Plot Scale
Drawing Orientation
196
Preview
197
.. ()
937 10250
02-725-6400 02-725-6499
itsc@itsolution.co.th www.itsolution.co.th