SHRI RAMSWAROOP MEMORIAL COLLEGE OF ENGG. & MANAGEMENT
B.Tech. [SEM V]
QUIZ TES
(Session : 2011-12) 1
THEORY OF MACHIN!
Time: 1 hour (EME-502) Max, Marks :30
( ratte. [~T | CI ]
{ (ob led by the Stent
Note: Attempt all questions.
PART-A [10 Marks]
(Questions from Tutorial Sheet)
1) What is machine? Giving example, differentiate between a machine and a structure.
(QNo.2) [2.542.5]
Q2) Ina crank and slotted lever mechanism, the length of crank is 560 mm and the ratio of tire of working
stroke to return stroke is 2.8. Determine: wor
(a) distance between the fixed centers, and 44 en,
(b) the length of the slotted lever, if length of stroke is 250 mm. gu $6
. (QNo.12) [2.542.5)
PAR’
[20 Marks]
QU) Describe the method to find the velocity ofa point ona Tink whose direction (or path) i :nown and the
velocity of some other point on the same link in magnitude and direction is given. {5]
2) The crank and connecting rod of a theoretical steam engine are 0.5 m and 2 m long respectively. ‘The crank
makes 180 r.p.m in the clockwise direction, When it has turned 45° from the inner dead centre position,
determine: lS Rerenere
Velocity of piston; SS ware ft Ok
Gi) Angular velocity of connecting rod;
Velocity of point E on the connecting rod 1.5 m from the gudgeon pin;
(iv) Velocities of rubbing at the pins of the crank shaft and crank when the diameters of thir pins are Somm.
qos
' ‘and 60 mm respectively 4 fy [2424242=8]
oes 0 6ON NS ‘>
Pee:
gan
{ Zoe 198%
EME-S02/Mr, Ashutoth pathak
Date: 20,08 720101ere
Q3) Locate all the instantaneous centers for the piackely sae ig. Determine the ratio of velocities of
points D and B and points C and B. Find the angular velocity of Ht . The crank speed is 500 r.p.m.
fateh / Hoe (BAg2-7]
te 63. Nails
We
ye 02 6
MSL
Vand Noe \ St
EME-S02/Mr. Ashutosh pathak Page:3.
Date: 20,08,20101SHRI RAMSWAROOP MEM
L_ COLLEGE
B.Teeh. [SEM V]
QUIZ TEST-1
(Session : 2011-12)
Refer/WVACAD
ENG MAN. EN
THEORY OF MACHINE
Time: 1 hour
Note: Attempt all questions.
QL) Write notes on complete and incomplete constraints in lower and higher pairs, illustrating your answer
Q2) In a Whithworth quick retu
50 mm and the length of the drivi
(EME-502)
Max. Marks :30
Rott No. [|
LLU CI
PART -A
(Questions from Tutorial Sheet)
with neat sketches. (Q.No.3)
(To be filed by the Student)
[10 Marks}
REST
.n motion mechanism, as shown is fig, the distance between the fixed centers is
ing crank is 75 mm. The length of the slotted lever is 150 mm and the length of
the connecting rod is 135 mm. Find the ratio of the time of cutting stroke to the return stroke and also the
v
effective stroke.
QI) Deseribe the m
Fas
Ee
y Os
(QNo.10)
PART -B
ase [2.5+2.5]
[20 Marks}
.ethod to find the velocity of a point on a link whose direction (or path) is known and the
velocity of some other point on the same link in magnitude and direction is given. [5]
(2) The crank and connecting rod of a theoretical steam engine are 0.5 m and 2 m long respectively. The crank
makes 180 r.p.m in the clockwise
determine! wh
(Velocity of piston; 8
(i
GiiyVel
Angular velocity of connecting rods
dy
ya NE
of point E on the connecting rod 1.5 m from the gudgeon pin;
tion. When it has turned 45° from the inner dead centre position,
arn
(iv) Velocities of rubbing at the pins of the crank shaft and crank when the diameters of their pins are Somm
and 60 mm respectively
EME-S02/Mr. Ashutosh pathok
Date:
20,08 20101
aes
qi
PN
me
Toe °
oT [2+2+24+2=8]
|