You are on page 1of 1

CreatetheProject

StartWorkbench.
Start>AllPrograms>ANSYS
14.0>Workbench14.0.
Thisworkshopusesthegeometry
createdinworkshop5aofthe
DesignModeler course.Openyour
savedproject(DMWS5a)anddrag
anddropaMeshingcomponent
systemontotheGeometryCell
(A2)asshown.
Ifyoudidnotcompletethis
workshop,acopyisprovidedin
theMeshingWorkshopsInput- Files
folder.
DoubleclickontheMeshCellB3to
startMeshing

You might also like