en tan nose
Number of
Purpose
group
0
mo...
Vv
[Fifth Schedule}
Fiera ScHEDULE
DESIGNATION OF PURPOSE GROUPS
(By-law 134, 138)
Descriptive Title
‘Small residential
Institutional
‘Other residential
Office
Shop
Purposes for which building or
compartment is intended 10 be used
Private dwelling house detached or
semidetached (not including a flat or
terrace house) not comprising more
than (1) a ground storey; (2) one
upper storey; and (3) a basement
storey or basement storeys
Hospital, school or other similar
establishment used zs _ living
accommodation for, or for’ treat=
ment, care or maintenance of,
persons suffering from disabilities
due to illness or old age or other
physical or mental disability or
under the age of 5 years, where such
persons sleep in the premises
Accommodation for _ residential
purpose other than any premises
comprised in groups I and 11
Office, or premises used for office
purposes, meaning thereby the
purposes of administration, clerical
work (including writing, book-
Keeping, sorting papers, filing.
typing, duplicating, machine-
calculating, drawing and the
editorial preparation of matter for
publication), handling money and
telephone and telegraph operating
Shop, or shop premises, meaning
thereby premises not being a shop
but used for the carsying on there of
retail trade or business (irlcluding
the sale to members of the public of
food or drink for immediate
consumption, retail sales by auction,
the business’ of lending books or
periodicals for the purpose of gain,
and the business of a barber ot
hairdresser) and premises to Which
members of the public are invited to
resort for the purpose of delivering
their goods for repair or other
1s[Fifth Schedule}
Number of Descriptive, Title
Purposes for which building or
compartment is intended to be used
purpose
group
VI... Factory
VII... Place of assembly
VHT... Storage and
general
treatment or of themselves carrying
‘out repairs to or other treatment of
Factory means all premises as
defined in section 2 of the Factories
and Machinery Act 1967, but
excluding those buildings classified
under purpose group VIII—Storage
and general
Place, whether public or private,
used for the attendance of persons
for or in connection with their
social, recreational, educational,
business or other activities, and not
comprised within group I to VI
Place for storage, deposit or parking
of goods and materials (including
vehicles), and other premises not
comprised in groups I to VII
DIMENSIONS OF BUILDINGS AND COMPARTMENTS
(By-law 136)
Purpose group Height of building
Limits of dimensioos
[Foor area of storey | Cubie eapecity of
in Budding oF com- | building or com-
portment (isi) | portmene (in mi")
a @ oO 4)
Part | — Buildings other than single storey buildings 7
nt institutional ‘Any height a0 «| Nolin
It (Other residential) Not exceeding 28m 3.000 ‘8500
Itt (Other residential) | Exceeding 28m 20 3300
Iv (shop) Any height 2000 7000
Vi (Factory) Notexceeding 28m No tii 28 000
vi (actor) Exceeding 28m 2.000 5500
Vil (Storage and general) | Notexceeding 28m No limit 21 000
IVI (Storage and general) | Exceeding 28 m 1.000 No timit
Part 2 — Single storey buildings
ht Gnstitotional)
HN (Other residential
ws ial)
Any height
Anyheight
3.000
3.000
1
Note: Purpose Groups 1, IV, and VII are excluded as there are no
16[Sixth Schedule]
‘Socmu ScHEDULE .
CALCULATION OF PERMITTED LIMITS OF UNPROTECTED
AREAS
(By-law 142, 145)
Part I
GENERAL RULES
1. The permitted limit of unprotected areas in any side of a building or
compartment shal be caliated by reference to the requirements of Part I,
it or IV.
2. In calculating the size of unprotected areas or the permitted limit of
unprotected areas, the following provisions shall apply:
(a) where any part of an external wall is an unprotected area, only
because it has combustible material attached to it as cladding, the
area of that unprotected area shall be deemed to be half the area of
such cladding;
(b) no account shail be taken of any of the following:
(i, an, unprotected area unless it is an area specified in
subparagraph (iii) hereof, which does not exceed 0.1 square
metre and which is not less than 1.5 metres from any other
unprotected area in the same side of the building or
compartment;
Gi) one or more unprotected areas having an area, or if more than
one, an aggregate area not exceeding 1 square metre and not,
less than 4 metres from any other unprotected area in the same
side of the building or compartment, except and such area as is
specified in subparagraph (i) above;
(ily an unprotected area in any part of an external wall which
forms part of a protected shaft;
(iv) an unprotected area in the side of a building not divided into
compartments, if the area is not less than 28 metres above any
ground adjoining that side of the building.
Parr I
RULES FOR CALCULATION BY REFERENCE TO AN
ENCLOSING RECTANGLE.
1. The conditions of this Part shall be satisfied if a building or compartment
is so situated that no point on the relevant boundary is either between the
relevant plane of reference and the side of the building or compartment or at
a distance from the relevant plane of reference which is less than the distance
specified in the Tables to this Part, acording to the purpose group of the
building or compartment, the dimensions of the enclosing rectangle and the
unprotected percentage.
2. For the purposes of this Part—
“plane of reference” means any vertical plane which touches the side or
some part.of the side of a building or compartment, but which (however far
un7