Professional Documents
Culture Documents
EP-CD901 / 903
INSTALLATION GUIDE
STEP 1
1
COMPONENTS
1 Heatsink (H.S.)
2
Aim the Bracket to
the 4 holes of MB.
Plug and press
bracket to the MB.
2 LGA775/1155
/1156 Bracket
3 White Pin
(W.P.) x4pcs
4 Black Pin
(B.P.) x4pcs
LGA775
3
Aim the Black Pin (B.P.) to
the holes of bracket.
A M D I N S T A L L A T I ON ( AM2 / AM3 / K8 )
STEP 1
Tear the package of the thermal grease off,
apply thermal grease evenly to the bottom
of heatsink base.
LGA775
5 Thermal Grease
4
Plug and press Black
Pin (B.P.) to bracket.
LGA1155/1156
ATTENTION
Please pay attention to the W.P. &
B.P. direction (LGA775 is inward;
LGA1155/1156 is outward)
CPU
Thermal Grease
STEP 2
Tear the package of the thermal grease off,
apply thermal grease evenly to the bottom
of heatsink base.
CPU
Thermal Grease
STEP 2
Hang on the mounting clip to either side
of Retention Module.
STEP 3
Press the other side of
mounting clip until its hooked in.
STEP 3
Install cooler to MB
STEP 4
Check the cooler by turning left and right.
Example
4 Check if the
cooler is in
right place.
PRECAUTIONS
OK
Right
1 Hang on the
mounting clip to
any side of the
bracket.
ATTENTION
Twist the HS if other
component in the
motherboard blocks.
Left
Keep and store the product away from the reach of children.
Check the component list and condition of the product before installation. If there is any problem, contact the shop
where you purchased to get a replacement or refund.
Xigmatek Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration, repair, improper installation, and improper testing.
CPU and motherboard are subject to damage if the product is incorrectly installed
http://www.xigmatek.com
E-mail: support@xigmatek.com sales@xigmatek.com
2011 XIGMATEK Co., Ltd. All rights reserved. All trademarks are the property of their respective owners.