Professional Documents
Culture Documents
USCutter Driver
USCutter Driver
Manage graph
For
letters,
please
profil
b. Rotated 90angle for well edited letterings or graph, the output will be cut out from
landscape orientation.
c. Set Print
Set layout as left bottom corner, set scaling as 98.5 (see picture 1)
Make sure no error with printers option (picture 2 is correct; picture 3 is with
error and cant output data)
Picture 1
Picture 2
Picture 3
2Port Setting:
The USB device will be found as COM4 from Device Manager .To ensure
stable work, please change the port to COM3.
3Turn on the power of cutter and press Setup on control panel. Adjust Baud Rate
to 4800 by pressing key on panel of cutter, and then press Setup. That
means you have successfully change Baud Rate to 4800 on the cutter.
Please note that the default Baud Rate of cutter is 9600, so youll need to adjust
the baud Rate every time you work through USB port.
Of course, you need to change Baud Rate back to 9600 both in Artcut
software and the cutter when you work the cutter through Serial or Parallel
port.