SKALPER™ ASGCO
CR Um Le
Primary Belt Cleaning System with E-Z Torque Tensioner
Our patented Skalper™ series of conveyor belt pre-cleaners have been installed and
have solved carry-back problems all over the world. The simple and highly effective
Skalper™ belt cleaner removes carry-back effecively and efficiently,
ExT
S04 Sass
Seal Sping
Hard Rock Mining
Rubber Comgatd
Dust Cover \
+ Excellent Performance - of our patented Skalper™ Blade design maintains
an effective cleaning edge throughout the life of the blade with its unique
horizontal sipesfwear-grooves across the entire width ofthe blade cleaning
edge and by the use ofthe arosshaped back side ofthe blade to ensure a
sharp cleaning edge.
* ExZ Torque Tensioner" {ifetime warranty) - made of al 304 stainless steel
mounting plates, collars and springs allows the blades to self adjust
throughout the entire life ofthe blade and isthe most robust and acourate
belt cleaner tensioner in the industry.
+ Torque Spring - provides a greater degree of tensioning per inch of blade,
verses compression springs which require more tensioning adjustment for
the life ofthe blade.
+ Rubber Corrugated Dust Covers and UHMW Bushings - ensures no build-up
in the spring tensioning area and provides smooth non-binding tensioning.
+ All Stainless Steel Mounting System and Tensioner - our standard zinc
plated, schedule 160 mounting tube combined with the E-Z Torque Tensioner™
provide our customers with a belt cleaner that can handle the most extreme
corrosive and weather conditions.
736°
* Quick-Change Blade - stainless steel pin blade change-out system is a
‘one-minute, ntool operation \
+ Easily Maintained - and tensioned from one side of the conveyor.
+ MSHA Accepted - #MSHA IC - 174/1 Unique horizontal sipes(wear-gooves) across
‘he entire with ofthe blade cleaning edge
Eee eee rdSKALPER’
Skalper” Blade with E-Z Torque
cycoves avons to Bade wh + The Skalper™ blade uses ASGCOthane, a special polymer
designed to handle mechanical fasteners
TECHNICAL INFORMATION
£2 Torque Tonsionar™
"Sand eg
“Sipsirekstey” + Rubber corrugated dust covers ensure no build-up in the spring
tensioning area
+ Stainless steel pin blade change-out system is a one-minute, no-tool
operation.
+ Our patented, extremely abrasion resistant Skalper™ Blade design
maintains an effective cleaning edge throughout the life of the blade
with its unique horizontal sipes/wear-grooves across the entire width
of the blade cleaning edge.
Skalper Part Numbers BW-t
Part Number Belt Width,
Ba TES)
Peleanew | "W Omoson | nie M-SK4-SYS-18-E27-12-4| 18°] 450mm
“ot eT Eimear -SK4-SYS-24-627-184 | 24°| 600mm
een mere M-SK4-SYS-30-£2T-244 | 30°| 750mm
IN oe eetannl [ener N-SK4-SYS-36-E2T-30-4 | 36°| 900mm
H\ 8) ar sims a M-SK4-SYS-42-EZT-36-1 | 42°] 1050mm
\ Pe ae M-SK4-SYS-48-27-42-4 | 48°] 120mm
Ratan LIS | “Sr M-SK4-SYS-54-627-48-4 | 54°[1350mm
M-SK4-SYS-60-EZ7-54+4 | 60°] 1500mm
M-SK4-SYS-72-£2T-66-4 | 72°] 1800mm
Attu ute si of a
ratraldeararce,
Replacement Blades
Skalper System also available with these blades:
Baa PartNumber__| Blade Width
AsG-sk-18A-1 | 18° | 450mm
13 AsG-sk'24a-t | 24" | 600mm.
it asc-sk'30a4_| 30" | 750mm
Par Naber SSR POR | ARROE TA SORE | ASE SOTTO! ASG-SK'36Ae1_|_36°_| 900mm
Blade Type ‘Shaiper'Y | Sklpert ‘Shaler HT [Shaler UHT AsG-sk*4aza-t | 42" | 1050mm
Durometer 85 8 85 a AsG-sk"4sA-1 | 48° [120mm
Ben Speed <1zaniom | <1200 fon <