You are on page 1of 2

HCPT- 2G SSV DRIVE TEST METHOD

1. Tools:
MS1: Sony Ericsson K800 (idle mode)
MS2: Sony Ericsson K790 (dedicated mode + packet data test)
2. Drive Test Method:
a. Voice Stationary Test:
1. Functional Test Call: 10 second voice call for each sector (destination number 212).
2. Handover Test: used Lock Handover Target Mode for each sector (Inter Handover and Intra
Handover).
3. SMS Test (MS1 to MS2).
4. 2G to 3G Cell Reselection: MS1 lock BCCH each sector and change TEMS Network Mode
from GSM to WCDMA.
b. Voice Moving Test:
1. MS1 locked all BCCH of tested site, idle mode.
2. MS2 unlocked BCCH, call 212 (120 second call/10 second idle). Do Drive Test at each antenna
main-lobe direction until low signal level. Make sure there are no Cross Feeder occurred.
c. Stationary Data Transfer Test:
1. MS1 locked each BCCH (idle mode).
2. MS2 FTP Test each sector (UL 300 KB / DL 1 MB).

HCPT 3G SSV DRIVE TEST METHOD

Please find Method SSV for 3G HCPT


1. Tools
MS1: Sony Ericsson K800 (idle mode)
MS2: Sony Ericsson K800 (dedicated mode + packet data test)
MS3: Sony Ericsson K800 (idle mode +)
For Static test
MS2: Modem / Sony Ericsson K800

2. Mobility Test, Check coverage & cross feeder


- MS 1 Idle Mode, Lock WCDMA
- MS 2 Dedicated Mode, Lock WCDMA
- MS 3 Idle Mode, Lock WCDMA and Lock Scrambling Code (SC) all sector.
3. Stationary test
- MS2: Test call to 212 (lock WCDMA, lock per sector if need)
- MS2: Test call to terminating (MS1) (Lock WCDMA, lock per sector if need)
- MS2: Test Video call to terminating (MS1) (Lock WCDMA, lock per sector if need)
- MS2: Test iRat. (Call to 212 in normal mode from WCDMA then HO to GSM)
- MS2: Download test 3MB (Lock WCDMA, lock per sector if need)
- MS2: Upload test 1MB (Lock WCDMA, lock per sector if need)
- MS2: HSDPA test (with modem, DL-3MB) - Lock WCDMA

You might also like