Professional Documents
Culture Documents
M7VIQ PDF Manual PDF
M7VIQ PDF Manual PDF
M77V
VIIQ
Q
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendors approval in writing.
The content of this users is subject to be changed without notice and we
will not be responsible for any mistakes found in this users manual. All the
brand and product names are trademarks of their respective companies.
C
Coonntteennttss
ENGLISH..................................................................................................... 1
M7VIQ Features ................................................................................................................. 1
Package contents .............................................................................................................. 1
Layout of M7VIQ ................................................................................................................ 2
CPU Installation ................................................................................................................. 3
DDR DIMM Modules: DDR1-2 ........................................................................................... 4
Jumpers, Headers, Connectors & Slots .......................................................................... 5
ESPAOL ................................................................................................. 12
Caractersticas del M7VIQ .............................................................................................. 12
Contenido del Paquete.................................................................................................... 12
Disposicin del M7VIQ.................................................................................................... 13
Instalacin del CPU ......................................................................................................... 14
Mdulos DDR DIMM: DDR1-2 ......................................................................................... 15
Conectores, Cabezales, Puentes y Ranuras................................................................. 16
TROUBLE SHOOTING............................................................................. 23
SOLUCIN DE PROBLEMAS ................................................................. 24
ii
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
English
M7VIQ Features
Use Via KM266/ VT8235 Chipset, W83697HF, LAN Chip (optional).
Contains on board I/O facilities, which include one serial port, one VGA port,
a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB
ports, a LAN port (optional) and a game port.
Supports the single AMD Socket A for Athlon (Thunderbird) / Athlon
XP / Duron processors running at 200/266 MHz Front Side Bus (FSB).
Supports Ultra 133/100/66/33, PIO modes, Ide hard disk drives, LBA mode.
Supports 2 DDR 200/266 MHz (without ECC) devices
Supports one CNR Slot (Type B only), three 32-bit PCI Bus slots, and one
AGP Slot.
Complies with PC Micro-ATX form factor specifications.
Supports popular operating systems such as Windows NT, Windows 2000,
Windows ME, Windows XP, LINUX and SCO UNIX.
Via AC97 2.2 compatible.
High S/N ratio meets PC 99 requirements.
4CH DAC, applicable for leading motherboard chipsets.
Line-in phonejack share with rear out.
Package contents
HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1
Flash Memory Writer for BIOS update X 1
USB Cable X 2 (Optional)
Rear I/O Panel for ATX Case X 1 (Optional)
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Layout of M7VIQ
JKBMS1
JATXPWER1
JKBV1
1
1
JUSBV1
JUSBLAN1
1
JDJ1
5
FDD1
FLOPPY DISK CONN.
JCOM1
DDR1
JCFAN1
JMIC1
JUSBV3
GAME Port
JLIN1
LINE-IN
LAN CHIP
VT8375
(KM 266)
JVGA1
JSPKR1
SP-OUT
DDR2
JPRNT1
MIC-IN
IDE1 IDE2
JAUD GAME
2
1
JDIMMVOLT
8
2
7
1
10
PCI1
2
1
9
Codec
PCI2
10 2
9 1
JUSB2
JUSB3
JUSBV2
1
BAT1
10
9
24 23
VT 8235
1
JCMOS1
PCI3
1
1
JCODECSEL
1
JWOL1
1
Winbond
W83697HF
JPANEL1
2
1
JSFAN1
1
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
CPU Installation
CP
U
1.
Pull the lever sideways away from the socket then raise the lever up
to 90-degree angle.
2.
Locate Pin A in the socket and lock for the white dot or cut edge in
the CPU. Match Pin A with the white dot/cut edge then insert the
CPU.
3.
Press the lever down. Then Put the fan on the CPU and buckle it
and put the fans power port into the JCFAN1, then to complete the
installation.
Ground
12V
Sense
JSFAN1
Sense
12V
Ground
JCFAN1
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
DIMM Socket
Location
DDR Module
DDR 1
64MB/128MB/256MB/512MB/1GB
*1
DDR 2
64MB/128MB/256MB/512MB/1GB
*1
Total Memory
Size (MB)
Max is
2GB
* The list shown above for DRAM configuration is only for reference.
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Power Connectors: JATXPWR1
JATXPWR1
(ATX Main Power Conn.)
JDIMMVOLT
(Default ==> 2.5V)
2.5V
2.6V
2.7V
2.8V
WOL1
Clear CMOS Jumper:
JCMOS
JCMOS1
1
Pin 1-2 on
1
Assignment
Normal
Operation
(default)
Clear CMOS
Data
Pin 2-3 on
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Front USB Header: JUSB2/ JUSB3
Pin Assignment Pin Assignment
1
+5V
2
+5V
3
Data (-)
4
Data (-)
5
Data (+)
6
Data (+)
7
Ground
8
Ground
9
Key
10
NA
2
1
JUSB1/2
JCLK1
On ==> 100MHz
Off ==> 133MHz
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
5V/ 5VSB Selection for Keyboard: JKBV1
JKBV1
Assignment
5V
Pin 1-2 on
1
5V_SB
Pin 2-3 on
Assignment
J_CODECSEL
Pin 1-2
On-board Primary
Codec (Default).
Pin 2-3
1
1
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Front Panel Connector: JPANEL1
SLP
PWR_LED ON/OFF
IR
24
23
SPK
HLED RST
IR
SPK
==> Speaker Conn.
HLED
==> Hard Driver LED
RST
==> Reset Button
IR
==> Infrared Conn.
SLP
==> Sleep Button
PWR_LED ==> Power LED
ON/ OFF ==> Power-on Button
1
5
JDJ1
JSPDIF1
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Audio Subsystem: JF_AUDIO/JCDIN1
JF_AUDIO1
(Front Audio Header)
2
1
10
9
22
1
Pin
1
3
5
7
9
JCDIN1
(CD-ROM Audio-In Header)
JAUDIO1
Assignment
Mic In
Mic Power
RT Line Out
Reserved
LFT Line Out
Pin
2
4
6
8
10
Assignment
Ground
Audio Power
RT Line Out
NC
LFT Line Out
2
4
6
1
3
5
7
9
2
4
6
Pin 5 and 6
Pin 9 and 10
10
10
No jumpers
installed
Configuration
10
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Back Panel Connectors
JGAME1_USB1
JKBMS1 RJ45USB1
PS/2
Keyboard
USB
Game Port/
USB Ports (optional)
JPRNT1
PS/2 LAN(Optional)
Mouse
Parallel
COM1
VGA1
JCOM1
JVGA1
11
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Espaol
Caractersticas del M7VIQ
Usa Chipset Via KM266/ VT8235, W83697HF, LAN Chip (opcional).
Contiene facilidades I/O integrados en la placa madre en el que incluye un
puerto en serie, un puerto paralelo, un puerto de ratn PS/2, un puerto de
teclado PS/2, puerto de audio, puertos USB, un puerto LAN (opcional), un
puerto de juego, y un puerto para el monitor.
Soporta single AMD Socket A para procesadores Athlon (Thunderbird)
/ Athlon XP / Duron corriendo a 200/266 MHz Front Side Bus (FSB).
Soporta Ultra 133/100/66/33, modos PIO, discos duros IDE, modo LBA.
Soporta 2 dispositivos DDR 200/266 MHz (sin ECC).
Soporta una ranura CNR (solamente de Tipo B), tres ranuras PCI Bus de
32-bit, y una ranura AGP.
Conforma con las especificaciones del factor de forma de tamao PC
Micro-ATX.
Soporta sistemas operativos populares tales como Windows NT, Windows
2000, Windows ME, Windows XP, LINUX y SCO UNIX.
Compatible con Via AC97 2.2.
High S/N ratio reune los requisitos del PC 99.
4CH DAC, aplicables para chipsets de principales placas madres.
Entrada de Lnea phonejack compartido con el rear out.
12
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Cable USB X 2 (Opcional)
Panel Trasero I/O para Caja ATX X 1 (Opcional)
J ATXPWER1
J KBV1
1
1
J USBV1
JUSBLAN1
FDD1
FLOPPY DI SK CONN.
JCOM1
DDR1
J CFAN1
JLIN1
Entrada
de Linea
JMIC1
Entrada
de MIC
KM 266
Puerto de Juego
Salida del
Altavoz
JUSBV3
1
LAN CHIP
I DE1 I DE2
JAUD GAME
2
1
JVGA1
JSPKR1
DDR2
JPRNT1
J DI MMVOLT
8
2
7
1
10
PCI 1
2
1
9
Codec
PCI 2
10 2
9 1
JUSB2
JUSB3
JUSBV2
1
BAT1
10
9
24 23
VT 8235
1
J CMOS1
PCI 3
1
JCODECSEL
1
JWOL1
1
13
Winbond
W83697HF
J PANEL1
2
1
JSFAN1
1
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
CP
U
1.
2.
3.
Sense
12V
Tierra
Tierra
12V
Sense
JSFAN1
JCFAN1
14
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Localizacin
del Mdulo
DIMM
DDR 1
DDR 2
Mdulo DDR
64MB/128MB/256MB/512MB/1GB
*1
64MB/128MB/256MB/512MB/1GB
*1
Total del
Tamao de
Memoria (MB)
Mximo de
2GB
15
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
16
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Conectores de Corriente: JATXPWR1
JATXPWR1
JATXPWR1
(ATX
PowerdeConn.)
(ATXMain
Conector
Corriente Principal.)
2.5V
2.6V
2.7V
2.6V
2.8V
2.7V
2.9V
2.8V
WOL1
17
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Puente de Borrar
CMOS: JCMOS1
JCMOS1
1
Contacto
1-2 on
Asignacion
Operacion
Normal
(default)
1
Borrar Datos
Contacto
CMOS
2-3 on
JUSB2/ 3
Contactos Asignacion
1
+5V
3
Data (-)
5
Data (+)
7
Tierra
9
Key
Contactos Asignacion
2
+5V
4
Data (-)
6
Data (+)
8
Ground
10
NA
18
5V
5V_SB
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Seleccin de Frecuencia del CPU: JCLK1
JCLK1
On ==> 100MHz
Off ==> 133MHz
JKBV1
Asignacion
5V
Contactos 1-2 on
1
5V_SB
Contactos 2-3 on
Assignment
J_CODECSEL
1
Contacto
1-2
Contacto
2-3
Codec Primario
integrado en la placa madre.
19
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Conector del Panel Frontal: JPANEL1
PWR_LED ON/OFF
SLP
IR
24
23
SPK
HLED RST
IR
SPK
==> Conector de Altavoz
HLED
==> LED del Disco Duro
RST
==> Boton de Reinicio
IR
==> Conector Infrarojo
SLP
==> Boton de Suspension
PWR_LED ==> Corriente LED
ON/ OFF ==> Boton de Encendido
JDJ1
Conector Digital de Audio: JSPDIF1 (Optional)
SPDIF_OUT
GND VCC5
1
JSPDIF1
20
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
Subsistema de Audio: JF_AUDIO/JCDIN1
2
1
JF_AUDIO1
(Cabezal Frontal de Audio)
JCDIN1
1 (Cabezal de Entrada de
Audio CD-ROM)
22
1
Contactos
1
3
5
7
9
10
9
JAUDIO1
Asignacion
Contactos
Entrada del MIC
2
4
Corriente del MIC
RT Salida de Linea
6
Reservado
8
10
LFT Salida de Linea
Asignacion
Tierra
Corriente de Audio
RT Salida de Linea
Key
LFT Salida de Linea
21
M
Mootthheerrbbooaarrdd D
Deessccrriippttiioonn
2
4
6
1
3
5
7
9
2
4
6
Configuracion
Contacto 5 & 6
Contacto 9 & 10
10
No jumpers
installed
10
JKBMS1 RJ45USB1
Raton
PS/2
Teclado
PS/2
Puerto de Juego/
Puertos USB (opcional)
JPRNT1
LAN(Opcional)
Paralelo
USB
COM1
VGA1
JCOM1
JVGA1
22
Trouble Shooting
PROBABLE
SOLUTION
No power to the system at all Power light dont * Make sure power cable is securely plugged in
illuminate, fan inside power supply does not turn
* Replace cable
on. Indicator light on keyboard does not turn on
* Contact technical support
PROBABLE
SOLUTION
System inoperative. Keyboard lights are on, * Using even pressure on both ends of the
power indicator lights are lit, hard drive is DIMM, press down firmly until the module
snaps into place.
spinning.
PROBABLE
SOLUTION
System does not boot from hard disk drive, can * Check cable running from disk to disk
be booted from CD-ROM drive.
controller board. Make sure both ends are
securely plugged in; check the drive type in
the standard CMOS setup.
* Backing up the hard drive is extremely
important. All hard disks are capable of
breaking down at any time.
PROBABLE
SOLUTION
System only boots from CD-ROM. Hard disk can * Back up data and applications files. Reformat
be read and applications can be used but the hard drive. Re-install applications and
data using backup disks.
booting from hard disk is impossible.
PROBABLE
SOLUTION
Screen message says Invalid Configuration or * Review systems equipment . Make sure
CMOS Failure.
correct information is in setup.
PROBABLE
SOLUTION
Cannot boot system after installing second hard * Set master/slave jumpers correctly.
drive.
* Run SETUP program and select correct drive
types.
Call
drive
manufacturers
for
compatibility with other drives.
23
Solucin de Problemas
CAUSA PROBABLE
SOLUCIN
CAUSA PROBABLE
SOLUCIN
Sistema inoperativo. Luz del teclado encendido, * Presione los dos extremos del DIMM, presione
luz de indicador de corriente iluminado, disco para abajo firmemente hasta que el mdulo
encaje en el lugar.
rgido est girando.
CAUSA PROBABLE
SOLUCIN
Sistema no arranca desde el disco rgido, puede * Controle el cable de ejecucin desde el disco
ser arrancado desde el CD-ROM drive.
hasta el disco del controlador. Asegrese de
que ambos lados estn enchufados con
seguridad; controle el tipo de disco en la
configuracin estndar CMOS.
* Copiando el disco rgido es extremadamente
importante. Todos los discos rgidos son
capaces de daarse en cualquier momento.
CAUSA PROBABLE
SOLUCIN
CAUSA PROBABLE
SOLUCIN
CAUSA PROBABLE
SOLUCIN
24
12/04/2002
25