Professional Documents
Culture Documents
ABB AG
Application
The Star Coupler 23SC60 is used to connect
decentralized I/O modules of the RTU211. It
is used to extend the serial peripheral bus
over distances of more than app. 50 cm.
The Star Coupler 23SC60 is available in 8
versions (Rubrik):
23SC60 R009n
Plastic Fiber
max. 500 m
23SC60 R008n
Glass Fiber
max. 2000 m
Characteristics
The Star Coupler 23SC60 is build by 2 up to
5 interface adaptors 23AD63 in one plastic
enclosure. They are connected in parallel
and to the Wired OR-Bus of the RTU211 by
a special connection cable.
Each interface adaptor 23AD63 is equipped
with two green LEDs, showing the activities
on the bus.
ABB AG
RTU211
Power Consumption
Typical
n * 0.35 W @ 5 V DC
Mechanical Layout
Length
Width
Height
n * 35.0 mm
107.5 mm
20.0 mm
Connection Type
Connector
R009n:
Plastic Fiber
R008n:
Glass-Fiber
Test Voltage
AC Test Voltage
EN 61000-4-16
IEC 60870-2-1
(class VW3)
Impulse Voltage
with stand test
IEC 60255-5
IEC 60870-2-1
(class VW 3)
2,5 kV, 50 Hz
Test duration: 1 min
5 kV (1,2 / 50 s)
Environmental conditions
Temperature
Relative
Humidity
ABB AG
Immunity Test
Electrostatic
Discharge
Immunity Test
IEC 61000-4-2
(level 3)
Radiated RadioFrequency
Electromagnetic
Field Immunity
Test
IEC 61000-4-3
(level 3)
Immunity to
Electrical Fast
Transient / Burst
IEC 61000-4-4
(level 3)
Surge Immunity
Test
IEC 61000-4-5
(level 3)
Immunity to
Conducted
Disturbances,
induced by RadioFrequency Fields
IEC 61000-4-6
(level 3)
4 kV Contact
8 kV Air
Performance criteria A
10 V/m
Performance criteria A
2 kV
Performance criteria A
2 kV
Performance criteria A
10 V
Performance criteria A
Ordering Information
23SC60 R009n
Plastic Fiber
23SC60 R008n
Glass Fiber