CAUTION: Make sure the holes in the glass bracket do not become enlarged during the rivet removal process. Some vehicles may use rivets to attach the window glass to the window regulator assembly. Remove the front door speaker. For additional information, refer to Section 415-00.
CAUTION: Make sure the holes in the glass bracket do not become enlarged during the rivet removal process. Some vehicles may use rivets to attach the window glass to the window regulator assembly. Remove the front door speaker. For additional information, refer to Section 415-00.
CAUTION: Make sure the holes in the glass bracket do not become enlarged during the rivet removal process. Some vehicles may use rivets to attach the window glass to the window regulator assembly. Remove the front door speaker. For additional information, refer to Section 415-00.
Window Glass Front Door Removal and Installation NOTE: LH shown, RH similar.
9.
CAUTION: Make sure the holes in the
glass bracket do not become enlarged during the rivet removal process. If the holes become enlarged, the new rivets may become loose, resulting in a clicking noise concern.
1.
Remove the front door trim panel. For
additional information, refer to Section 501-05.
NOTE: Some vehicles may use rivets to attach
the window glass to the window regulator assembly.
2.
Remove the front door speaker. For additional
information, refer to Section 415-00.
NOTE: Use a 4.5 mm (0.1772 in) drill bit to
drill out the glass-to-regulator rivets.
3.
Remove the interior moulding.
4.
Remove the exterior mirror front door weather
shield.
5.
Disconnect the exterior mirror electrical
connector.
6.
Release the 3 door wiring harness pin-type
retainers.
7.
Remove the front door weather shield.
8.
Remove the door trim panel reinforcement.
Copyright 2005, Ford Motor Company
Last updated: 10/10/2006
Remove the 2 front door window
glass-to-regulator bolts or rivets.
Position the front door window glass as
necessary to access the front door window glass-to-regulator bolts or rivets.