Professional Documents
Culture Documents
IQI Standards
IQI Standards
Wire Diameters;
Wire Number
Wire Diam (mm)
3.20
2.50
2.00
1.60
1.25
1.00
0.80
0.63
0.50
11
12
13
14
15
16
17
18
19
0.32
0 25
0.20
0.16
0.125
0.10
0.08
0.063
0.05
Wire Number
Wire Diam (mm)
10
0.40
Indicator Sizes:
There are four sizes of EN Image Quality Indicators.
Size 1 contains wire numbers 1 to 7 and used for material
thicknesses in the range of 40 to 160mm
Size 6 contains wire numbers 6 to 12 and used for material
thicknesses in the range of 12.5 to 50mm
Size 10 contains wire numbers 10 to 16 and used for material
thicknesses in the range of 5 to 20mm
Size 13 contains wire numbers 13 to 19 and used for material
thicknesses in the range 2.5 to 10mm
All sizes are available in Steel (Fe), Aluminium (Al), and Copper (Cu.) Titanium (Ti) Image Quality Indicators are only available in sizes 10 and 13.
As an illustration the identification (i.e. lead monogram) for, say Size 1 (Wire numbers 1 to 7) in steel (Fe) would be 1 FE EN
All EN Image Quality Indicators are individually numbered and supplied with a Certificate of Conformity, with or without wallets. (Please specify)
Product Codes (10mm long):
F00.2001 to F00.2014
Product Codes (25mm long):
DIN 54 109 Wire Type Image Quality Indicators are similar to the
EN 462-1:1994 I.Q.Is, the wire diameters are the same, and there
are the same wire numbers in each size of Indicator. The only difference
being that the lead monogram reads DIN rather than EN.
Example; Size 1 (Wire numbers 1 to 7) in Steel (Fe) would be 1 FE DIN.
DIN 54 109 Wire Type Image Quality Indicators are only available in Steel
(Fe), Aluminium (Al) and Copper (Cu) but can be supplied with either
10mm, 25mm or 50mm long wires.
All indicators have a serial number for Quality Assurance purposes,
from which can be traced to the measured wire diameters and date of
manufacture.
A Certificate of Conformity is optionally available at additional cost.
Wire No
1
2
3
4
5
6
F00.2041 to F00.2052
F00.2061 to F00.2072
Set No.
Wire N
F00.2081 to F00.2092
1
2
3
4
5
6
Dia. mm
0.08
0.10
0.13
0.16
0.20
0.25
F00.2101
Set No.
F00.2102
Dia. mm
0.81
1.02
1.27
1.60
2.03
2.50
F00.2103
Dia. Ins
0.0032
0.0040
0.0050
0.0063
0.0080
0.0100
Wire No.
1
2
3
4
5
6
Dia. mm
0.25
0.33
0.40
0.51
0.64
0.81
Dia. Ins
0.010
0.013
0.016
0.020
0.025
0.032
F00.2112
Dia. Ins
0.032
0.040
0.050
0.063
0.080
0.100
Set No.
Wire N
1
2
3
4
5
6
Dia. mm
2.50
3.20
4.06
5.10
6.40
8.00
F00.2111
F00.2113
Dia. Ins
0.100
0.128
0.160
0.200
0.250
0.320
F00.2114
PAGE 12