You are on page 1of 1

Dec.

23, 2014
For More Information Contact:
Joe Harwood, 541-543-5788
or Lance Robertson, 541-729-7690
Eugene Water & Electric Board

Engineers investigate Leaburg Dam gate problem


Eugene Water & Electric Board engineers and operations personnel are looking into why one of
three roll gates at Leaburg Dam stopped working on Tuesday, Dec. 23.
The unexpected shutdown of the gate is the second to fail in the past three years. The middle roll
gate experienced a failure in January 2012 and is currently being repaired at the 73-year-old
hydroelectric facility on the McKenzie River. The three 16-feet-tall by 100-feet-wide gates regulate
the volume of water spilled from the dam on the river east of Eugene.
Shutdown of the right-bank roll gate poses no immediate threat to the public. The remaining
operational gate, plus an overflow spillway, can pass more than 31,000 cubic feet per second of
water more than the river volume forecast for another rainstorm expected to hit the area on
Wednesday. The long-term forecast beyond Wednesday calls for less precipitation and even a
drying trend into next week.
EWEB officials are not yet certain why Roll Gate No. 1 closed unexpectedly on Tuesday morning.
The closure was similar to the failure of the motor system at the middle roll gate nearly three years
ago. Repairs to the middle roll gate should be completed by mid-January, increasing the flow
capacity to about 52,000 cfs more than the biggest flood that occurs once every 100 years, on
average.
The gates have a unique system or opening and closing. They are cylindrical steel that roll or
rotate, up and down, to regulate the flow of the river. Water also is diverted at Leaburg Dam into a
power canal that is used to generate electricity at a powerhouse four miles downstream. The dam
was constructed in 1931.
end

You might also like