Professional Documents
Culture Documents
Cor
AghamRd Diliman Quezon City
Floor Polishing
Window Cleaning
Always have wet and dry rags to clean the edges. Use rubber gloves to protect your hands. Have
extra rags on hand.
Use a pail of water to dip the squeegee/sponge to clean the window. Squeeze
out excess water from sponge with the wet rag onto the pail.
Start cleaning the window with a sponge in circular motion. Then from top to bottom and from
left to right side of the window. (Sponge in vertical position, then in horizontal position)
Remove excess water using the squeegee part (rubber). From top to bottom (squeegee in
vertical position) then from left to right (squeegee in horizontal position.) From time to
time, wipe the squeegee with a dry rag to remove the water.
Spray the liquid glass cleaner to the top part of the window.
Use the squeegee to clean the window with the liquid glass cleaner. From top to bottom,
squeegee in horizontal position to spread the liquid glass cleaner. Remove excess liquid with
the dry rag.
Bed Making
Bed pad
Smoothen the
linen through the
use of the dorsal
side of the palm
(back of the hand)
to prevent
contamination
(hygiene
purposes).
Miter corners
Eliminate creases or
folds through the use
of the back of your
hand.
Miter corners
(foot part).
Add the
comforter.
For two persons/double, 45 degree fold. Tuck the sides for a neat
presentation.
For fast stripping, hold the middle part of one edge and the center of the
linen or blanket. Lift them higher to fold the center.
With one hand at the center, fold the two middle edges toward each other.
The same procedure can be used in folding new linens. This folding
technique enables the task to be finished faster.
When asked to do a demo for a TESDA NC II, dont forget to introduce yourself. Explain the
preparation activities such as the materials needed and safety measures. Explain the different
steps while executing them at the same time. End the demo by explaining the safety
measures needed before returning the materials to the cabinet or storage area.
Example, in ironing, the cord should be checked first for defects or animal bites. After ironing,
the iron should be turned off and the plug should be pulled out of the socket. Let it cool first
before returning it to storage. Ironing board should also be folded and returned to the storage.
These will prevent accidents and safety for the children who may be running around the area
once you have finished the task.