Professional Documents
Culture Documents
MagiCAD 2008 5 Users Guide
MagiCAD 2008 5 Users Guide
MagiCAD 2008 5 Users Guide
MagiCAD 2008.5
What is new in
MagiCAD 2008.5
Contents
Chapter 1. Common features
Unicode...................................................................................................................................... 1
Save as 2007.11 format.............................................................................................................. 1
Provision for Voids.................................................................................................................... 2
Rounding of the provision for voids............................................................................ 2
Status settings ............................................................................................................................ 3
10
Cable number........................................................................................................................... 10
Drawing functions ................................................................................................................... 11
General ...................................................................................................................... 11
Cable drawing............................................................................................................ 11
Conflict situations...................................................................................................... 12
Settings of cable packets ........................................................................................... 13
System description dialog........................................................................................................ 14
Default cable.............................................................................................................. 14
Product data dialog .................................................................................................................. 14
Default cable.............................................................................................................. 14
Calculation data......................................................................................................... 14
Upside down mirror................................................................................................... 15
Project management................................................................................................................. 15
Change Properties.................................................................................................................... 16
Part Properties.......................................................................................................................... 16
Dimension texts ....................................................................................................................... 16
IFC exports .............................................................................................................................. 17
Original IFC export ................................................................................................... 17
New IFC export and import for calculations ............................................................. 17
Other changes .......................................................................................................................... 19
Resolved issues........................................................................................................................ 19
21
Contents iii
iv Contents
Unicode
It is now possible to select either National or Unicode character set in MagiCAD
HP&V, Electrical and Room. (National was used in the previous versions.) The
selection is made in the Project Settings section of the project management
dialog.
The values are in millimeters. Rounding value is used to round the value to the
nearest multiple of the rounding value upwards. For example, if the Automatic
Void Provision function created a provision for voids with size 154x154 and the
rounding value were 10, the resulting size would be 160x160 if the rounding
value were 25, the resulting size would be 175x175.
Rounding down value can be used to avoid rounding to produce too large voids.
For example, if the offset for rectangular void were 20 mm and a pipe's outer
diameter were 114 mm (and 100 mm were the maximum diameter for circular
void), the result before rounding would be 114+20+20 => 154 mm x 154 mm. If
the rounding value were 25 mm, after rounding the size of the void would be 175
mm x 175 mm. That could be a too wide gap, but with the rounding down value
one can round small exceedings of the rounding value downwards. If the
rounding value of 5 mm were used, the resulting size would be 150 mm x 150
mm.
Automatic Void Provision functionality (command MAGIAVP) is able to detect
the need for voids from partial collisions. For example, the case where the walls
do not have an end (that is, the wall is not a complete box), the case where the
void would not be completely inside the wall / floor.
Status settings
It is possible to define different kind of status definitions in the project
management dialog.
You can set line type, color and line weight settings for the status.
The status can be determined while drawing the duct/pipe or when installing the
devices. It is also possible to determine the status afterwards with Change
Properties.
-Not defined- status means that MagiCAD uses the normal settings.
Chapter 2. MagiCAD
Heating&Piping and Ventilation
Chapter 2. MagiCAD Heating&Piping and Ventilation / Options for adding components and devices fast 5
Dimension texts
It is now possible to add the Connection size with phi and Connection size with
drawn phi for pipes.
Double-clicking a variable in Available list adds the variable to the Selected list.
Double-clicking a variable in Selected list removes the variable. Naturally,
double-clicking a constant variable still shows the editing dialog.
New variable Fall has been added for the sprinkler pipes.
Change Properties
A new option has been added to Change Properties to change air flows of air
devices.
Earlier it was not possible to select the desired drawing from the Model drawings
list, because the size of the dialog was constant. Now it is resizable, so you can
see the drawing names even though the path name is long.
IFC
Radiators with different connecions (AB/FE) were presented incorrectly in an
IFC file.
ObjectID variable was shown as DeviceID in MagiCAD's own property sets in
IFC. Name has been changed to ObjectID. Also, the formula of the object ID
was shown in the IFC file instead of the result.
Other changes
When drawing a duct from a roof fan, the command now asks if you want to
change the duct size to match the fan size.
It is now possible to draw ducts/pipes up to 500 meters high (previously the limit
was 50 meters)
It is now possible to take the Collar length and diameter attributes (Air Devices)
to MagiCAD Export.
The following new market area selections have been added to the project: Latvia
(LVA), Estonia (EST), and China (CHN).
Center snap points have been added for air devices (and more generally, all snap
points that can be got for models).
Now it is possible to give direction also to a fan that is installed to the end of the
duct.
Resolved issues
Connecting to the manifold did not work correctly. If dH in the branch was set,
all pipes from the fourth connection used that value, and slanted pipes were
created.
MagiCAD Export failed in some cases if the project was without any ductwork
systems and all systems were selected.
Chapter 2. MagiCAD Heating&Piping and Ventilation / Model Drawings dialog is now resizable 7
If different product types were selected to the same dimension text (for example,
water point and sewer point) the dimension text was removed when the other
object was moved. Now the text is not removed any more.
When you calculated the system, MagiCAD saved all the drawings to the
memory during the calculation. If there were many drawings, this feature raised
the usage of memory quite big and that caused fatal errors. Now during one
system calculation, MagiCAD releases the *.dwg files as soon as it is ready with
them. This does not happen if multiple systems are selected.
When using the option Remove building system parts from file... in IFC
Export, the function did not remove MagiCAD data from the selected IFC file.
Now it is possible to draw ABS ducts properly etc, also if MagiCAD is loaded.
Part Properties of the provision for voids showed world coordinates instead of
floor coordinates.
It was not possible to install valves into sewer pipe as it was in some of the
earlier versions.
It was not possible to install valves to a pipe smaller than 10 mm.
It was not possible to change pipe material during drawing a vertical pipe.
Search circle found objects also outside of it. Now it shows only the objects
which are inside of the circle.
Dimension text variables top of part and bottom of part showed an incorrect
value for provision for voids.
The duct symbol options text in the Viewport Preferences dialog is now "2D Symbols" instead of "1D - Symbols".
Xref drawings were not regenerated after hide or reset hide which could seem
that the hide was not working properly with xref drawings.
User variable names are now used also in Change Properties dialog.
The insulation was shown with duct components even though the insulation was
invisible.
Copying of sprinkler (or any QModel device) was very slow, because QModels
were updated during copying, even when it was not necessary.
Per mil and Connection size with phi dimension text variables were shown as '?'
Exhaust / extract symbol was incorrect when a connection node going upwards
was made first and then it was erased (showed X instead of /).
Sizing method listed only a limited number of methods correctly. For example,
after nine methods all information was shown as 0 when the project dialog was
closed and reopened.
When a product was selected to the project from a qpd file, MagiCAD kept the
product database reserved until MagiCAD was closed.
If the Show objects as saved in model space setting in Drawing Preferences was
active, paste-clip did not work when MagiCAD was loaded.
Chapter 2. MagiCAD Heating&Piping and Ventilation / Changes made in version 2007.11 SR-1 9
Cable number
You can now give a cable number for a cable when you start to draw one and
with part properties. Cable number is editable also in the circuit dialog after
installing a circuit.
Drawing functions
General
Linetype has now also the selection of by project. This is because of the new
status feature. With this option the linetype will follow the settings found in
status definitions.
Cable drawing
Cables are now handled as whole cables when they are drawn. If linetype,
installation, xy-routing, presentation or corners are changed during cable
drawing, MagiCAD will split the cable into several entities, but they will be
linked together as a whole cable.
Cables have four significant properties: system, material, cable number and
status. If one or more of these is changed during cable drawing, the cable will be
cut and a junction box is forced to be installed. If a junction box that has two
cables connected to it is removed, the cables are connected as a whole cable if
the significant properties are the same for both cables. Otherwise they are left as
separate cables. The link between two entities of the same cable is also lost if the
two connected ends are separated too far from each other (100 * world scale).
If one or more of the significant properties is changed for a piece of cable with
Part Properties or Change Properties, MagiCAD will try to change it to other
pieces that belong to the whole cable (including the pieces in other drawings if
connection nodes are used). If for some reason MagiCAD cannot change the
properties, the action will be canceled and there will be a message. This can
happen if a drawing where the cable is installed is not readable/writeable (e.g.
when using connection nodes to other drawings that are opened by another user).
If a device is installed in the middle of a cable, the cable will be split into two
pieces. They will, however, still have the same properties as the original, so if
the original cable already had a cable number, both of the two new cables will
have the same cable number. MagiCAD gives a message if this happens.
If a device is installed in the middle of a cable and the cable already has an IFC
GUID, MagiCAD will reset the IFC GUID. New ones will be created in the next
IFC Export function.
If the system is changed in cable drawing options when starting to draw a cable,
MagiCAD tries to find the default cable that is defined for the system. If a cable
type is found from the system, MagiCAD will automatically change the current
cable type to that one. If a cable type is not found, the current cable type
remains.
Conflict situations
The Different Properties dialogs that appear in conflict situations have a new
appearance. The available selections are:
Copy selected properties from the selected object to options (doubleclick to select)
With this option on you can select the wanted properties from the
selected object to the currently active properties and use those. Use
double-click to copy properties.
The properties that are not shown in the dialog are already the same or are taken
from the current settings.
You cannot give the number of similar cables anymore when adding cables to a
cable packet. Now you need to add cables one by one because you can give each
cable a cable number to make them unique. Part Properties will still sum up the
number of similar cables that do not have cable numbers defined.
Calculation data
Because of the use of IT systems in some market areas, products now have also
the phase definition of 2~.
Do not use this option with products that cannot be installed upside down or at
least with products that cannot be presented upside down in 3D view. When
using only 2D symbols, it is up to the user which symbols are wanted to be
mirrored upside down.
Project management
You can now select the default power distribution type in project settings. The
selectable types are:
TN-S
TN-C-S
TN-C
IT
TT
DC
The selected type is written to every circuit when making the IFC Calculation
Export.
Change Properties
Now it is possible to change the linetype for one or several objects by using
Change Properties.
Now it is possible to change the arrow symbol of a connection node by using
Change Properties.
Part Properties
Linetype is now visible in Part Properties.
Cable number is visible in Part Properties (of a cable and cable packet) and can
be changed there.
Status is visible in Part Properties.
Dimension texts
Dimension texts now recognize all system codes from cables that are inside a
cable packet. With break cable it is possible to get all the system codes inside the
break space.
There is now also a selection for the column separator. The available options are:
none
space
use character
With use character its possible to use any desired character between the
variables.
Dimension texts can be now used for voids also. Voids have now their own layer
settings in MagiCAD Electrical. Two dimension line variables have been added:
Void provision owner and Void provision size. In addition, a void recognizes the
following dimension text variables: Top elevation, Top elevation absolute,
IFC exports
Original IFC export
The original IFC Export (MAGIEIFCOUT) now adds also CostQuantity and
CostUnit to products if the add cost data option is selected. CostQuantity is the
length for objects that are measured in lengths and one for objects that are
measured in amount. The CostUnit is MMT for lengths and EA for amounts. The
CostData property set can be read into cost estimation software such as Eldata.
With this function it is possible to export the whole electrical power system or
only the electrical power distribution system to calculation software such as
Febdok. After running the command there are two options for export range:
All circuits
This option exports the whole electrical power system with every
device connected behind a circuit that is connected to a switchboard.
Circuits between switchboards
This option only exports the switchboards and everything between them
This is used when only the distribution system is wanted to be
dimensioned.
With this function you can import your electrical power system back to
MagiCAD from calculation software such as Febdok and update all the cables
back to your drawings. Additional information is updated also for protective
devices. This is shown in the circuit dialogs PD Code field.
Note:
You have to connect everything you want to export with cables and circuits. You
can only have one main switchboard so that MagiCAD and the calculation
software know what the starting point is. This means that there has to be only
one switchboard that is not connected to any other switchboard via cable and
circuit. If MagiCAD finds several possible main switchboard candidates, it gives
a message and the export is canceled.
To make calculation software read everything correctly, please define the
number of used phases for junction boxes and switches also. An incorrect
number might be understood wrong by the calculation software. This applies
also to all other devices. Switchboards are automatically handled as three-phase
devices.
Circuits that are not connected to a switchboard are not exported. You can see
the circuits that fail the export in a message when running the export. Also
circuits that are not connected to a switchboard but are in the area of a
switchboard will not be exported.
If you do not define phases for circuits, the calculation software might handle
them wrong. In such cases some software such as Febdok may read the phases
from the previous device that is located upstream so because of the handling of
switchboards as three-phase devices the circuits without phase information will
most likely be handled as three-phase circuits.
IFC Schema is 2x3ge. Cable types get their name from cable description. Cable
lengths are written for the cables as well as the installation code. Cables have to
have exactly the same name in both MagiCAD and in the calculation software to
understand the cable types.
Other changes
The active power of the switchboard is now recognized by reports, dimension
texts and part property line.
The Update drawing data function is now optimized so that it updates only the
necessary data that is found from the objects that are in the drawing. This saves
time because now MagiCAD does not have to check through every layer
definition.
Devices have now checkboxes for all earthing styles in product data dialog: N,
PE and PEN. These are for future purposes.
More snap points added for 2D symbols: center and quadrant.
Resolved issues
Connection nodes can now be created successfully to other drawings even if a
connection node has an elevation that is different from the elevation that the
actual storey border has. Previously there were some limits that made the use of
connection nodes too precise.
When continuing to draw from a connection node the properties of the selected
object are forced to be used by the conflict dialog. You can see the forced
properties in the Different Properties dialog.
When texting top and bottom heights MagiCAD shows the outer limit heights of
the selected part. Previously it showed the heights from the clicked position and
this sometimes lead to some false values with cable tray crossings.
Part property line and dimension texts now show only the installation point
elevation from connection nodes when elevations are wanted to be shown.
Previously there were some false values shown with top and bottom elevations.
Previously circuit number could hold only six characters. Now it can hold up to
10 characters.
When exporting an object into IFC that has an apostrophe ( ) inside some
product data, the apostrophes are now changed to spaces because previously they
made the IFC file unreadable.
The whole product note can now be copied to clipboard from reports. Previously
it was limited to some amount of characters.
Now every variable can be shown in a report if needed. Previously there were
some limitations.
Previously MagiCAD made a reduction if it was selected in the cable tray
options when drawing a bend under 10 and over 2 degrees. Now the reduction
none is forced in these situations and the trays are cut to straight pieces with
slightly slanted installation. With bends less than or equal of 2 degrees
MagiCAD interprets it so that the user has wanted to make a direct tray and
draws it so.
Description has been added to the product field in Part Properties of a
combination box. Previously there was only the product code.
The minimum value of cos phi for switchboards is reduced from 0.6 to 0.
Object ID is now written to the MagiCAD property set in IFC Export.
MagiCAD property set is now written into IFC also for cables when they are
selected to be exported.
Now object direction and position are taken from the 3D symbol (if an object has
one) when making an IFC Export.
The previously hidden function MESCP has now a button: Show Cable/Cable
Packet/Conduit Route.
20 / Resolved issues
Color color of the object. This color setting is the default color
which will be created when the object is created to the drawing.
These values can be changed also from AutoCADs layer
management.
2D and 3D presentation
Colors will be updated automatically when exiting from the Project dialog. The
colors are also updated when using Show Room Objects or 2D/3D functions.
These values can be set also in the Project Management dialog. With Shift and
Ctrl buttons, several rooms can be edited at the same time.
22 Chapter 4. MagiCAD Room / Air flow values by area or times per hour
Common features of
MagiCAD applications
Contents
Chapter 1. Installation
Demo projects............................................................................................................................ 3
Template drawings and projects ................................................................................................ 3
Common menu........................................................................................................................... 5
MagiCAD HP&V Viewport Preferences................................................................................... 5
Main viewport ............................................................................................................. 5
Presentation options tab ........................................................................................... 6
Dimension texts tab.................................................................................................. 7
Hide options tab ....................................................................................................... 8
Misc tab ................................................................................................................... 9
MagiCAD Electrical Viewport Preferences............................................................................. 10
Clip + Rotate, Restore from Clip + Rotate .............................................................................. 10
Error handling (Show messages) ............................................................................................. 11
Clear Garbage Layer................................................................................................................ 11
Drawing Cleaning Utility......................................................................................................... 11
Help ......................................................................................................................................... 12
13
Voids menu.............................................................................................................................. 13
Provision for voids................................................................................................................... 13
Automatic void provisions....................................................................................................... 13
Settings for automatic void provisions in the project management ........................... 14
Import Provision for voids report ............................................................................................ 15
16
20
Unicode.................................................................................................................................... 20
Status ....................................................................................................................................... 21
Contents iii
iv Contents
Chapter 1. Installation
Chapter 1. Installation 1
When you start the program for the first time with its shortcut, the following
message may appear:
Demo projects
MagiCAD includes a demo project to make it easier for you to get acquainted
with MagiCAD.
The demo project is located in the /Demo projects subdirectory of MagiCAD
program directory.
The paper sizes in the template drawings are defined at 1:1 scale, which means
that the viewport must be scaled with ZOOM using the 1/50xp factor if you wish
to scale the contents in 1:50. The output is printed in 1:1 scale.
It is possible to modify the template project as desired and save it with a
different name (file extension DWT). If MagiCAD's Template subdirectory is
saved in the Drawing Template File Location setting of MagiCAD's profile, only
the template drawings in the particular directory appear when a new drawing is
created.
Template projects
Template projects have the same main principle as template drawings. In the
template projects, it is possible to define storey list, devices, dimension line
styles, layer names, sizing criteria, duct/pipe series and insulation series. You
can make different template projects for different purposes, and it is
recommended to save them all to a previously defined location (for example,
c:\magicad\template).
A template project consists of
Chapter 3. Functions in
MagiCAD Common menu
Common menu
This toolbar contains the functions that are common to all MagiCAD
applications:
Show Messages
Help
Main viewport
If the same viewport settings are used in several different viewports, it is
possible to select the main viewport. Main viewport settings and hide
information can be used in other viewports. Set Is main viewport in Viewport
Note: When the main viewport is set, the viewport must be in model space.
There can be only one main viewport at time.
If hide or reset hide is run in the main viewport, all viewports which are set to
Follow main viewport are also regenerated.
If hide or reset hide is run in a viewport which is set to Follow main viewport,
there is a message: Hide/reset hide is not possible in the current viewport
because it is set to follow the main viewports settings
1D - Symbols in the Size coefficient field you can set the common
scale factor (e.g. 1:100) for plotting. You can also set the limit for
displaying the vertical pipes with their own dimensions also in 1D.
Symbol Options opens a dialog where you can select the presentation
of vertical ducts in 2D and vertical pipes in 1D.
Centerline with these options you can define whether to display the
centerline of the ducts and pipes. For the pipes you can define a
minimum diameter; the centerline is not displayed in the smaller pipes
even though the option is selected.
Show with these options you can select which texts are displayed in
the viewport.
All = all texts are displayed.
Placed in the current view = only the texts are shown which are
placed in the active viewport.
Distances defines the distance between the hidden line and the
continuous line, and the minimum length of the ducts/pipes. The
minimum length can be defined only if invisible linetype has been
selected.
Misc tab
Open Ends select whether to draw the arrows to the open ends of
ducts and pipes
Distances affects the handling of the selected objects. Width defines the
width of the area. Bottom and Top have no effect on the selected
objects; instead, these settings are used to select the default height level
that is zoomed.
Restore from Clip + Rotate restores the original view. If several viewport is
used, this function must be run in the viewport where the side view is.
With this function you can examine the error situations that may occur in the
design process (e.g. when the MAGIMOV command is used), calculations,
collision control, etc. The Show Messages dialog contains information on these
error situations, for instance, the system, storey, part type and error type. You
can define the messages according to these properties. Besides other information
about the error situations, their location is showed in the dialog (as coordinates).
1.
2.
The dialog saves its size, location, and other settings as the default
values for the next use.
3.
4.
The coordinates in the Pos column are selected between Floor and UCS
coordinates. If UCS coordinates are selected, only the coordinates of the
active storey are showed.
Help
Displays the online help of MagiCAD.
Voids menu
Offset There are separate offset settings for rectangular (h1) and
circular voids (h2). Minimum distance between separate voids can also
be defined (h3) (if the voids were closer to each other, they would be
combined). The user can also define that from a certain diameter the
circular voids become rectangular voids (maximum diameter for
circular void). It is also possible to choose not to create a void if the
void would be too small (minimum equivalent diameter for void).
Name text part of the running index, e.g. P like a pump TE like a
temperature sensor.
Text group Selected text group for this format. Needed only for
filtering when inserting running index to objects. Name of text group
can be also shown in dimension text etc. This field is optional
16 Chapter 5. Running Index / Settings for running index in the project management
Text groups
NOTE ! You do not even need to define the text groups, if you do not have many
different formats. Text groups are used to filter different kind of formats when
inserting running index to objects. Name of text group can be also shown in
dimension text etc.
Number shows the next used number. If nothing is shown, press Next
free
Use first available number selects the first available number, which has
to be bigger than the first number. If e.g. 10, 11, 12, 13, 14, 17, 18, 19 are
used, the next free is 15.
Use given number or next available you can give the smallest allowed
number, which has to be bigger than First number in format.
Next Free gives the next free number. If you have decided to allow the
same numbers in different systems, the system is asked.
Use the same number for all indexes if this option is selected, you can
insert the same numbers as many times as you prefer.
When the settings have been defined, insert the running index to objects by
selecting Install. After installing the running index to the first object, object type
is locked for this installing session. It means that when you install the running
index e.g. to a socket, also the next object has to be a socket. MagiCAD does not
give any other object types to the selection. When you quit and restart the
command, the object type locking is released.
Filter It is for filtering which Running indexes are shown in the dialog.
Indexes The running indexes in current project and included in the filter.
Index these numbers have been used. If Compressed is selected only first
and last number is shown.
File Status Empty: drawing is opened and ready for editing (editing of
other than the current dwg is not possible in MagiCAD Electrical); Not
opened: not opened, but it could be opened;
Locked: someone else has opened the drawing
It is possible to select several rows by using the Shift -ja Ctrl buttons. By using
the Select All button you can select all rows, and with the Deselect All button
you can deselect all rows.
Current Values of Selected The first and last number of the selected
Indexes.
New Values If you want to renumber the indexes, you can either give the
new first or last number and press the Apply button. Gaps are removed, if
Remove gaps is selected.
Unicode
It is now possible to select either National or Unicode character set in MagiCAD
HP&V, Electrical and Room. (National was used in the previous versions.)
Unicode allows using e.g. Russian or Chinese characters. The selection is made
in the Project Settings section of the project management dialog.
When the character set is changed from National to Unicode, the program gives
a warning about the project becoming incompatible with older MagiCAD
versions. If OK is clicked, the program converts the project suitable for Unicode
character set.
When the character set is changed from Unicode to National, the program gives
a warning that characters may disappear (in practice they will appear as question
marks).
Status
It is possible to define different kind of status definitions in the project
management dialog. You can set line type, color and line weight settings for the
status.
Add to BOM This must be selected if objects with this status are
intended to be included in the BOM.
The status can be determined while drawing the duct/pipe or when installing the
devices. It is also possible to determine the status afterwards with Change
Properties.
-Not defined- status means that MagiCAD uses the normal settings.
COM interface
It is possible to transfer data between external programs and MagiCAD via
MagiCAD COM interface.
MagiCAD Heating&Piping
and Ventilation
Contents
Chapter 1. General
17
Contents iii
iv Contents
97
Contents v
vi Contents
Chapter 1. General
Chapter 1. General 1
2.
3.
4.
5.
6.
Create and edit the storey list. Define a storey for each drawing. If
a storey is divided into several drawings, define a storey for each
drawing and set their locations side by side. In the storey list, the
location (x,y,z) and size (a,b,h) of each storey are given. You must
define the storey list correctly to make sure that the connection
nodes between storeys work as intended.
NB: If there is already a MagiCAD Room project file of the
project, you can import the storey list from the MagiCAD Room
project (.MRD file extension).
7.
8.
Set the storey origin, i.e. show the point that is the corner of the
storey defined in the storey list. The best choice is usually the point
that is easy to point in all the storeys that are on top of each other
(for instance, the corner of the building or a certain point in a
module grid). In addition, MagiCAD asks you to show the
direction of the positive x-axis.
Handle the other drawings within the same project as described above, except
select the project instead of phases 5 and 6.
If the project contains storeys that are almost alike, you can save a drawing with
a different name and choose the storey that represents it. In addition, you need to
connect the connection nodes. If the connection node numbers at each end of the
vertical duct/pipe are the same, it makes the copying process easier as you do not
have to change the connection node numbers when you copy the drawings.
Storey list
After you have created the project, check the storey list. The storey list editor
contains the following functions (which you find by clicking the right button in
the right pane):
The storey list contains the storey ID, the description (Name), location in
relation to other drawings (x,y,z), dimensions (a,b) and height (h).
Product modeling
You can model your own products for MagiCAD with the MagiCAD Product
Modeller application.
The user-defined parts can be modeled to USER*.QPD files that are shipped
with the program, or to product files that are copied from these files (not to
manufacturer-supplied databases). You cannot modify manufacturer-supplied
databases without a password.
Product modeling is described in a separate manual.
Choose the user-defined product to the project like any other product.
Project
This function opens the Select Project dialog, where you can attach the drawing
to a project or create a new project. When a project has been created or the
drawing has been attached to an existing project, the project management dialog
opens and you can define the relations between the projects, storeys and
drawings, select the desired products to the project, define dimension text styles,
etc. Practically all definitions that apply to the entire project are made in this
dialog.
User Preferences (MAGIUSR)
With this function you can set the directory containing the product databases.
You can also set here the size of the search circle. The settings are saved in the
user registry.
Update Drawing Data
With this function you can update object properties (e.g. Layer, line weight,
Device symbol, National code, Running index), which are changed in Project
Management., to the drawing.
Calculations
You can run the calculation functions either from a separate Calculations toolbar
or from a flyout toolbar of the project manager toolbar.
Documentation
You can run the functions of the additional markings either from a separate
Documentation toolbar or from a flyout toolbar of the project manager toolbar.
IFC Export
With this function you can export MagiCAD model in the IFC format. IFC
(Industry Foundation Classes) is an international standard for defining the
product models in the building services. It is a method for sharing and
distributing the information between different software applications.
Plug-ins (MAGIPLG)
Use this function to start the possible external utilities (plug-ins).
Duct (MAGIDUC)
Ducts, branches, and connections to air devices are all drawn with this function.
Define the active duct size, insulation, and default types for T-pieces and bends,
with the drawing options.
The default action of this function is to connect to a duct or an air device. In this
case, the cursor has a search circle. If you start drawing from an empty space,
use the noConnect option (the search circle then disappears).
It is also possible to select a part and start drawing from the appearing + grip.
+ grip is shown as bolded plus sign when the object is selected. Click + grip
to start drawing. When clicking the middle + grip, it is also possible to show
the place from where to start drawing.
You can rotate the Angle of the coordinates for the drawing session by showing
two points, deriving the angle from an existing MagiCAD object, or giving it in
relation with the current angle. With the Connection node option, you can
transfer flow rates between drawings (that is, vertical ducts), or you can replace,
for instance, a part of the ductwork (none type connection node). Make the
height level changes with the Z option.
Fire Damper (MAGIFIR)
Choose a fire damper and place it into a duct.
Flow Damper (MAGIFLO)
This function is similar to the fire damper function.
Silencer (MAGISIL)
This function is similar to the fire damper function.
Fan (MAGIFAN)
This function is similar to the fire damper function.
Other component (MAGIOTH)
This function is similar to the fire damper function.
Distribution Box (MAGIBOX)
Define the dimensions for the distribution box and place it into an empty space
or a duct.
Cleaning Cover (MAGICCR)
Place a cleaning cover to a duct.
Flow Arrow (MAGIFAR)
Place the airflow arrows of the air terminal devices.
Choose the number and direction of the arrows with the command options. With
these options you can also define the types of the supply air / exhaust air / freely
placed flow arrows.
Note: This toolbar is a flyout toolbar that is included in the Ventilation toolbar.
Air Device (MAGIDEV)
Set the airflow for a air device, select the device and place it either into an empty
space or to a duct end. You can affect the direction of the air devices with the
Direction option.
Supply Air Device (MAGIDSU)
This function is similar to the Air device.
Extract Air Device (MAGIDEX)
This function is similar to the Air device.
Outdoor Air Device (MAGIOUT)
This function is similar to the Air device.
Exhaust Air Device (MAGIDET)
This function is similar to the Air device.
You can rotate the Angle of the coordinates for the drawing session by showing
two points, deriving the angle from an existing MagiCAD object, or giving it in
relation with the current angle. With the Connection node option, you can
transfer flow rates between drawings (that is, vertical pipes), or you can replace,
for instance, a part of the system (none type connection node).
Use the Z option for the height level changes.
Radiator (MAGIRAD)
When you place a radiator, calculate the radiator capacity (this applies to
radiators in the manufacturer databases), and select the radiator size, radiator
valve and pipe connection points. Choose the direction of the radiator with the
Direction option.
Valve (MAGIVAL)
Use this function to place radiator/zone/stop/other valves to pipes. You can also
select, create and modify the drawing symbols for the valves.
Angle valves can be placed to the angles of the pipe system.
If you place a differential pressure valve, MagiCAD asks the pressure drop for
the riser. If you use this kind of valve, the other line must contain a measuring
valve. You can use any valve for this purpose.
Other Pipe Component (MAGIOTP)
Use this function to place the pipe components (water meter, filter, pump,
expansion vessel, etc). You can also select a symbol for the component, create
new symbols, and modify existing symbols.
Other Pipe Device (MAGIOPD)
With this function, you can place either manufacturer-supplied (e.g. return air
unit) or user-modeled power consumption points into an empty space.
Depending on the modeling method, MagiCAD asks the power and pressure
loss, or power only. It is possible to model either actual dimensions or only
connection points to the device. MagiCAD calculates the water flow rate
according to the differential temperature, which is you have either defined for
the system or given when placing the products.
Manifold Pipe (MAGIMANIFOLD)
Manifold is a pipe part with the main connection and a variable number of subpipes with equal distances between the subpipes. The directions of the main pipe
and sub-pipes can be changed individually.
Sprinklers
With these functions you can place the sprinklers (MAGISPR), draw sprinkler
pipes (MAGISPP), and connect the sprinklers to the pipe (MAGISPC).
Cold, Hot, and Circulation Water Pipes (MAGIPAL)
Draw all water system pipes, branches, and connections to the water points with
this function. Define the pipe size, insulation, and pipe spacing with the drawing
options. You can choose the pipe types from a flyout toolbar: cold water pipe
(MAGIPCO); hot water pipe (MAGIPHO); circulation water pipe (MAGICPI);
cold and hot water pipes (MAGIPCH); hot and circulation water pipes
(MAGIPHC).
You can rotate the Angle of the coordinates for the drawing session by showing
two points, deriving the angle from an existing MagiCAD object, or giving it in
relation with the current angle. With the Connection node option, you can
transfer flow rates between drawings (that is, vertical pipes), or you can replace,
for instance, a part of the system (none type connection node).
When you draw only cold water pipe, you can make a connection between cold
water pipe and hot water pipe using the Hot water joint option. When you draw
only hot water pipe, you can make a connection between hot water pipe and
circulation water pipe using the Return joint option.
Use the Z option for the height level changes.
Water and Sewer Point (MAGIWDE)
With this function, you can place a tap water connection, a sewer connection, or
both. You can change the default height levels that are defined in the product
databases. You can also change the flow rate and the proportional locations
between the water and the sewer points.
Water Radiator (MAGIWRA)
When you place a radiator for a hot water system, calculate the radiator capacity
(this applies to radiators in the manufacturer databases), and select the radiator
size, radiator valve and pipe connection points.
Insert Substation (MAGIHEATEXCHANGER)
You can define a substation, which can contain the desired number of heating
circuits and water heaters. You can connect the heating and water pipes to the
substation, so open ends are not needed except the cold water pipe that is
entering the building. Neither it is necessary to use old kind of hot water joints
any more.
Edit Substation (MAGIHEATEXCHANGEREDIT)
With this function you can modify an existing substation.
Sewage Pipe (MAGISEW)
Draw all sewage pipes and sewer point connections with this function.
Usually Smart routing is used, which means that MagiCAD tends to draw all
connections with standard parts. In this case, the pipe must descend or be
horizontal in the flow direction. When you start drawing from a sewer point,
MagiCAD automatically sets the sewer fall descending. In addition, MagiCAD
checks the suitability of the connection, and changes the fall direction if
necessary. AutoCAD's Polar tracking is a convenient tool when drawing sewers.
You can rotate the Angle of the coordinates for the drawing session by showing
two points, deriving the angle from an existing MagiCAD object, or giving it in
relation with the current angle.
When you connect to the trunk sewer, MagiCAD defines also the length of the
bevel, depending on how the connection is made to the trunk sewer. MagiCAD
intelligently decides to set a long or a short bevel according to the distance
between the search circle and the perpendicular connection point in the trunk
sewer (Connect option).
With the Connection node option, you can transfer flow rates between drawings
(that is, vertical pipes), or you can replace, for instance, a part of the system
(none type connection node).
Other Sewer Component (MAGIOSC)
Use this function to place cleaning covers, fire stops, and other components for
the sewer. You can also select a symbol for the component, create new symbols,
and modify existing symbols.
Edit menu
With this function, you can change properties of parts. You can give an absolute
value for the property or define it according to the project settings (by project).
You can direct this function to one part, a branch, a network, or the entire
system. You can even combine these selections, or use AutoCADs basic
selection for selecting the parts.
Find and Replace (MAGIFIN)
With this function, you can replace products and duct/pipe/insulation series. You
can direct this function to one part, a branch, a network, or the entire system.
You can even combine these selections, or use AutoCADs basic selection for
selecting the parts.
Break Duct or Pipe (MAGIBRK)
With this function, you can remove a piece of duct or pipe between two points.
Joint Part (MAGIJOI)
With this function, you can place a joint part to a duct or pipe. The joint part, for
example, transforms into a bend if you move the ductwork/pipe system in a
certain way. It is also possible to use the joint part as a boundary for duct/pipe
properties. For example, you can change the pipe material using a joint part.
Connection node
Connection nodes are used, for example, to transfer flow rates between storeys.
Connect connection nodes by selecting the drawing where the connection nodes
will connect. The counterparts with the same ID number are connected. If the
drawing, where the connections are searched from, contains an unconnected
connection node that directs to the open drawing, a new connection node is
created to the open drawing. The drawing where the connection nodes are search
from must not be read-only.
Dimension Texts (MAGIDIM)
Dimension texts are placed with this function. You can modify the text styles,
and change the active style with the Format command line option. You can
Underline and Overline the dimension texts using the corresponding options.
You can place the dimension text variables side by side with the Byside option.
You can also set underline or overline later with the Part Properties function. In
addition, you can copy dimension texts from other projects.
Automatic Dimension Texts (MAGIADM)
With this function you can place the dimension texts automatically to one part
group at the time. The same dimension texts are used as in the conventional
dimension text function. Select the active dimension text style with the mouse. It
is possible to have several active styles, in which case several dimension text is
set to the part. Before a new dimension text is set, the old one is removed.
Sections
You can run the calculation functions either from a separate Sections toolbar or
from a flyout toolbar of the project manager toolbar.
Insert Running index
Numbering the parts (Running Index) with unique position ID. The numbering
formats are defined in the project. The format consists of a constant text and the
number. The texts and numbers can be displayed e.g. in dimension texts. The
function checks that the number is not already in use elsewhere in the drawing or
the project. The numbering can be changed afterwards with the Edit function.
It is possible to edit and renumber the indexes that are already in place in any
drawing except which are opened by some other user.
Remove Running index
Use the Remove Running Index function to remove the running index from
object.
Set MagiCAD Data to AutoCAD Objects (MAGISEPR)
With this function you can set the following data to AutoCAD objects: Group
type, System, User code, Product code, Description, UserVar1 and UserVar2).
The objects that have MagiCAD data defined are included in the bill of
materials, IFC Export and MagiCAD Export lists.
Note: This is a flyout toolbar that is included in the MC-HP&V Edit toolbar.
Connection node (MAGIFNC)
Connection nodes are used, for example, to transfer flow rates between storeys.
Connect the nodes by selecting the drawing where the nodes will connect. The
counterparts with the same ID number are connected. If the drawing, where the
connections are searched from, contains an unconnected node that directs to the
open drawing, a new connection node is created to the open drawing. The
drawing where the connection nodes are searched from must not be read-only.
Disconnect node(MAGIDIS)
Use this command to disconnect all external flow connections.
Connection Node Report (MAGIFLOWNODEVIEW)
Use this command to locate the connection nodes in a drawing.
Sections menu
Note: This is a flyout toolbar that is included in the MC-HP&V Edit toolbar.
Section Marks (MAGISMR)
Give the height levels of the upper and lower surface, and the depth of the
section mark. You can change these later with the Part Properties function
(MAGIPPR). The cross-section can be either conventional (Section) or detailed
(Detail).
The cross-section is made with the Make Section (MAGIMSC) function.
Drawing the section mark will continue until you press <Enter>. Next, show the
direction for the arrows.
Make Section (MAGIMSC)
This function makes a cross-section of the selected section mark. The section
mark is drawn with the Section Mark function (MAGISMR)
You can include MagiCAD Electrical, AutoCAD, and/or AEC objects, also from
the reference drawing, in the cross-section. If you prefer, you can also set the
automatic Active2D hide (Hide, MAGIHID) to the cross-section and include
the name of the source drawing in the cross-section.
It is also possible to add dimension texts to the cross-section. The objects in the
cross-section are not included in the calculations (eg. bill of materials).
You can change the settings of the section mark/cross-section, and update the
cross-section, with the Part Properties function (MAGIPPR).
Quick Section (MAGISCP)
With this function you can quickly make a cross-section of MagiCAD objects
for an overview of the connections. First, select the objects you want to include
in the quick section. Next, show the location and direction of the view.
View menu
This function is used for getting the overall view of the system. Values of one
variable (e.g. flow rate, pressure drop, elevation) at a time can be displayed at the
products of the selected system/system group.
Collision Control (MAGICOL)
With this function you can find out the possible collisions between the parts.
Select the collision types (for example, Duct pipe) in the Options dialog. Select
the area you want to check. The collisions are showed in the Show Messages
dialog, and you can select them to be showed with error ticks in the drawing.
You can even examine the collisions with MagiCAD parts in the reference
drawing, AutoCAD/ADT/AEC objects, and cable trays in MagiCAD Electrical
drawings.
It is also possible to define tolerance for the collision. With negative values the
part are allowed to be inside each other, whereas with the positive values empty
space is reserved around the parts e.g. for installation and maintenance.
It is possible to save the collision boundaries.
Calculations menu
Note: This toolbar is a flyout toolbar that is included in the Project Manager
toolbar.
Give the system-specific input values with the system-modeling function. For
example, in this way you select the calculations that you wish to allow to each
system.
All the calculation results presented in dialogs can be copied to the clipboard for
pasting eg. to a spreadsheet.
Flow Summation (MAGICFL)
This function calculates the flows of the selected system, but does not perform
any sizing. If you have selected the Calculate flow option, MagiCAD updates the
flows that connect to the active drawing from other drawings. If other drawings
are temporarily not available, you can use the Use last value option.
In addition, the flow summation calculates the volumes of the heating and
cooling systems (pipes and radiators). The volume is saved at the open end of
each supply pipe. The sizing and balancing functions always sum up the flow
rates and calculates the volumes.
Note: If several subsystems are drawn in the project and using the same system,
the total volume of the entire system is seen at each open end.
Sizing (MAGISIZ)
This function calculates the flows and performs the sizing for the selected
system. The function uses the sizing criterion that you have defined in the
system dialog (MAGISYS).
This function calculates also the volume of the system.
Balancing (MAGIBAL)
This function calculates the flows and balances the selected system. You can
balance the drawn system right away, or you can first run the sizing function.
You can also set MagiCAD to show the index run of the system if necessary.
Documentation menu
Note: This toolbar is a flyout toolbar that is included in the Project Manager
toolbar.
Type Free Text (MAGIFTX)
Type the free text with this function.
Edit Free Text (MAGIFTE)
With this function, you can read the free text to a window where you can edit it.
Revision Arrow (MAGIRAR)
Revision Cloud (MAGIRCL)
Change the Arc length by choosing that option and showing two points.
Construction Boundary (MAGICBR)
Drawing the construction boundary will continue until you press <Enter>. Next,
show the direction for the arrows.
The Available projects list includes the projects that are saved in the same
directory as the drawings or on upper directory levels towards the root directory.
If no projects are found, the list is empty.
You can select an existing project from the list by clicking the Select button.
To create a new project, click the New button.
To exit from the project selection dialog, click the Cancel button.
The left pane contains a list of different types of project data. When you click
some of them, the more detailed view of the contents appears to the right panel.
NOTE ! When you click the right mouse button on the right pane, additional
functions become available.
The contents of the project dialog:
Project settings / Market area Here you can define the market area.
When you are selecting products to the project you are able to see only the
products that are available in the selected market area.
Project settings / Backup project files in drawing Here you can define if
you want to save project files in the drawing (dwg file) for recovery. If the
Backup project files in drawing option is selected, saving the drawing also
packs the .EPJ, .LIN and .QPD files inside the drawing. They can be
restored to the current drawing directory with command
MAGIRESTOREPRJ. If the project files exist in that directory, the
program asks whether to overwrite them.
Storeys Here you can add or remove storeys that are attached to the
project. The storey boundaries appear in the drawing, if that option is
selected in the Viewport Preferences dialog. It is also possible to read the
storey list from a MagiCAD Room project with the help of the Import
function. Height (h) is storey's default height, which is defined in the Storey
Properties dialog of MagiCAD Room. Dimensions a and b are read from
MagiCAD Room application, which returns a bounding box of the rooms in
the storey.
Ducts All settings of the ductworks, that apply to the entire project, are
made here:
Systems
Layers
Insulation series
Duct series
Sizing methods
Dimension texts
Systems
Layers
Sizing methods
Dimension texts
Water systems
Systems
Layers
Sizing methods
Dimension texts
Sprinklers
Systems
Layers
Dimension texts
Insulation series
Pipe series
Sewers All settings of the sewer systems, that apply to the entire project,
are made here:
o
Systems
Layers
Insulation series
Sewer series
Dimension texts
General All general settings, that apply to the entire project, are made
here:
o
Layers
Dimension texts
Linetypes
Provision for voids settings for creating intelligent provisions for voids
Variable sets settings for object numbering, adding object IDs, and
defining the object status
o
Object ID formats
Status
Running Index
Text formats
Text groups
The right pane contains the preview of the relative locations of the storeys.
The drawing is attached to the specific storey with the Active storey function.
The selection list contains the storeys that are defined in the storey list. Place the
storey origin for the drawing with the Install storey origin function.
Click the Close button to exit from the dialog.
Layer name the layer where the part is attached. MagiCAD joins
the layer variables SV1, SV2, and SV3 to the layer name if the
layer name contains the corresponding {SV1}, {SV2}, and {SV3}
strings.
In this way it is also possible to add the product variable, which is
possibly given in the Select products for the project function, if the
layer name contains the {PV} variable. Layer variable {VV} can
be used to separate layers for the provision for voids with different
owners.
Center Line / Edge line / Details select the line type, color and
line weight to each case.
Line type You can define the line type according to the height
level (By height), you can define it according to the system (By
system), it can be constant (Continous, Hidden,etc..), or it can be
defined according to the layer properties (By layer). (These options
may vary in different situations)
By system The color and linetype of the system are defined in the
Systems dialog .
By series the line type, color and line weight for the insulation
series, which is set in the Insulation Series dialog.
By object the line type, color and line weight for the insulation is
the same as in the insulated object.
By layer The line type, color and line weight are editable by
using AutoCAD properties in Layer Manager of AutoCAD. Use
multiple layers for object must be enabled.
Default layer settings here you can define the default values for
AutoCAD properties Color, Linetype and Lineweight. These
default values are used only if the layer does not already exist. You
can also define the layers separately for the centerline, edge line or
details. This is done by using the Layer name field.
The line types are selected from the types that are defined in the projects *.LIN
file.
If Use multiple layers for object option is used, the line weight for insulation
can be changed by using AutoCADs LWDEFAULT system variable. Type
LWDEFAULT at the command prompt and edit the value.
You can freely give the same layer name to several parts if you want to limit the
number of layers in the drawing. For instance, you can place all the ductwork
parts on the same layer.
MagiCAD creates MAGI_0 layer for its internal use. If you have locked the
MAGI_0 layer (it should never be locked), you cannot install any ductwork/pipe
system parts.
The projects line type file is in the standard format that AutoCAD uses. You can
edit the projects line types in the same way as AutoCADs line types.
Select the line color of the part in the Select color dialog.
The color number 7 (black/white) is always the opposite color of the
background. You can choose the colors 1-6 can be by showing them, and the
colors 8-255 are named as Acad-xxx, where xxx is the color number. The colors
correspond with AutoCADs color numbering.
The line types that are defined according to the height level, and the types and
colors of the hidden lines and insulations, are defined in the Linetypes section.
0... mm height limit is used also when valves are placed. If the height level
of the horizontal pipe is higher than the limit that is defined here, the 3D symbol
of the valve is placed to the pipe upside down.
Systems
Each part created with MagiCAD belongs to a system. A system can be, for
instance, a supply air, exhaust air, or heating system.
Select the system under the desired group (system type) from the project
management dialog. Click the right mouse button on the desired system on the
right pane to create new systems, modify existing systems, or remove systems.
Select the function from the popup menu:
System type is supply air system, extract air system, outdoor air
system or exhaust air system.
Layer variables (SV1, SV2, and SV3): you can draw the systems
on their own layers by using {SV1}, {SV2}, and {SV3} variables
in the layer names.
different from the pressure drop of the air terminal device at the
design airflow.
Initial sound is the initial value for sound calculation. This sound
level is used with the first part of the system (usually an air
handling unit).
Heating/cooling/special system:
Layer variables (SV1, SV2, and SV3): you can draw the systems
on their own layers by using {SV1}, {SV2}, and {SV3} variables
in the layer names.
Water system:
Cold water, color is the default color of the cold water pipe.
Hot water, color is the default color of the hot water pipe.
Layer variables (SV1, SV2, and SV3): you can draw the systems
on their own layers by using {SV1}, {SV2}, and {SV3} variables
in the layer names.
Sewer system:
Name is the more accurate identification for the lists that have
references to the system.
Layer variables (SV1, SV2, and SV3): you can draw the systems
on their own layers by using {SV1}, {SV2}, and {SV3} variables
in the layer names.
Sprinkler system:
Name is the more accurate identification for the lists that have
references to the system.
Distribution pipes start from size defines which pipe sizes are
considered as branch pipes and which sizes are considered as
distribution pipes.
A list of the product groups (e.g. supply devices, exhaust devices) opens. When
you select the product group, the products that are selected to the project appear
on the right pane. It is possible to reorganize the product lists by using buttons
Up and Down. The products are also presented in that order in the installation
dialogs.
Click the right mouse button on the right pane. A popup menu opens with the
following options:
When the Select products to project function is selected from the popup menu,
the Product Selection dialog opens:
Select the manufacturer from the list in the left pane. When you click the +
button, the products and product sizes appear in the list, and with the
Properties function you can examine the data of the selected product.
In the right pane you can see the preview of the product. If the product has been
modeled using the Qmodel technology, a rendered image of the product is
displayed, and the image can also be rotated. If you want to see the product
dimensions instead of the rendered image, select the Dimensions option.
You can browse the products either from a local database (the product database
on a local disk drive) or an internet database (the product database on
Progmans website). You can change the path from where to search the local
databases with the Select product database path function.
Search for certain products from MagiCAD product database can be done by
product code or description. Also the description language can be selected.
Product codes are market area specific as normally. Search keywords can contain
many words - all words must be found for match. Search can be started by
clicking the Search button or pressing Enter. Note that a special search index
(different from the normal product index) is needed, so the first time Apply is
clicked or some database is changed there might be a delay of several minutes
for creating the search index. Search filters the product tree so that only nodes
with matches are shown.
Select the database to the project by clicking the Select product button.
MagiCAD asks you to define the User code (required), Product variable
(optional) and National code (optional):
When you accept your choices with Ok, the Product Selection dialog opens
again and you can select more products to the project. If you do not want to
select more products, exit the dialog with the Close button.
Insulation series
Insulation series are defined to the project in the project management dialog.
First select the system type (Ducts, pipes, etc) and then select Insulation Series.
The insulation series that are selected to the project appear in the right window
pane.
Click the right mouse button in the right pane. A popup menu opens, and you
can select from the following options:
Manager copy insulation series from another project with the Project
Manager function
National code can be output with MagiCAD Export and show in the
dimension texts
Type line type for the insulation, if the setting in the Layer Settings
dialog is By Series
Color color for the insulation, if the setting in the Layer Settings
dialog is By Series
Line weight line weight for the insulation, if the setting in the Layer
Settings dialog is By Series
During sizing, MagiCAD selects the most suitable insulation for the ducts and
pipes.
Manager copy duct/pipe series from another project with the Project
Manager function
National code can be output with MagiCAD Export and show in the
dimension texts
k (roughness)
Flexible duct (when this is selected, the circular ducts are handled as
flexible)
Duct sizes (available duct sizes, and the ratio between the bend radius
and the duct diameter with the circular ducts. In addition, the minimum
length of the direct piece of duct, which is required by ductwork parts,
is defined here for each size.)
Flexible pipe (when this is selected, the pipes are handled as flexible)
In addition you can give the following information to a sewage pipe series:
Separate the width and height of a rectangular duct with x (for example,
300x400). The duct sizes are modeled in ascending order (first by width, then by
height: e.g. 300x150, 300x200, 300x300, 400x150, 400x200,...). When
MagiCAD selects the duct size, it browses the size list and selects the first size
that matches the sizing criteria.
Select the products in the Products field from the product databases with the
Right arrow button, and remove them with the Left arrow button
If necessary, you can model eg. a duct series containing both circular and
rectangular ducts.
The Min Length, which is defined for each duct/pipe size, defines the minimum
length of a direct piece of duct/pipe that is required by each duct/pipe system
component or a component that is installed to them. This means that the total
length of the direct piece of duct/pipe is twice the given dimension.
Sizing methods
Sizing criteria are defined to the project in the project management dialog.
First select the system type (Ducts, pipes, etc) and then select Sizing methods.
The sizing criteria that are selected to the project appear in the right window
pane.
Click the right mouse button in the right pane. A popup menu opens, and you
can select from the following options:
Dekv-max (the maximum diameter that the v-max and dp-max are used
with)
Enter the information the list sorted by the size in ascending order. The last item
in the list should be a large diameter that certainly covers all the modeled
duct/pipe series.
If the duct/pipe series does not contain duct/pipe size that fits in the sizing
criteria, MagiCAD gives a message when sizing is performed.
Name
Density
Viscosity (cinematic)
Dimension text
You can modify the dimension text style in the Project Management or by
selecting the Format option when installing dimension text. Select first the main
group in the Dimension Text dialog. A list appears, containing the groups to
which you can define dimension texts. You can see a preview of the dimension
text format in the right side of the panel.
Select the group, and a list of the Available formats updates. Select the style, and
all buttons get enabled.
When you click Edit or New, the Dimension Formats dialog opens. You
can give the name for the dimension text, select the variables, define the
properties of the baseline and the reference line, and select the alignment. This
window contains also information that is used only in the automatic dimension
texts.
It is possible to define style, text height and color for dimension text according to
the project settings (the By project option) or according to the dimension text
specific settings (Style, Text height or Text)
There are two additional dimensions in the dimension text variables of the air
devices. Airflow sum defines that the air device flows are added up to the
dimension line. Please note that you do not need to define a Newline for this
variable, and you cannot output any other variables to the last row. Another
variable is No. of devices, which indicates the number of the similar devices.
Please note that this variable must be first in the variable list (this takes place
automatically).
Reference line options
First part, the reference line will appear only with the first part
that is selected
All parts, the reference line will appear with all the parts that are
selected for the dimension text
Symbol scale
Set the scale factor for the reference line symbol. Scale factor can be from 0.2 to
4.0. By default it is 1.
Alignment options
Left align
Center align
Right align
Set the dimension text style active with the Set Active button. Active dimension
text formats can be used from the project or from the drawing. This is done by
User Preferences setting Use active dimension text settings from Drawing /
Project. This prevents changing other users active dimension text in multi-user
projects.
You can also copy styles from other projects. Click the Manager button,
which opens the Project File Manager dialog. With the Copy button you can
make a copy of the active style.
The height levels of the ducts and pipes are the height levels of the their
midpoints.
It is possible to add text styles to the drawing by using AutoCADs Format/Text
style function.
Name text part of the running index, e.g. P like a pump TE like a
temperature sensor.
Text group Selected text group for this format. Needed only for
filtering when inserting running index to objects. Name of text group
can be also shown in dimension text etc. This field is optional
Text groups
NOTE ! You do not even need to define the text groups, if you do not have many
different formats. Text groups are used to filter different kind of formats when
inserting running index to objects. Name of text group can be also shown in
dimension text etc.
Click the right mouse button on the right pane of the Project Management to
create new, modify existing, or remove Object ID formats. Select the function
from the popup menu:
When you click Edit or Insert, the Object ID Formats dialog opens. You
can give the description and select the variables for the Object ID format.
Object ID format can be given to all products. Object ID is defined to the
product in the Project Management.
When installing product, the Object ID is written automatically to the object. If
Object ID format is not selected for the given product, Object ID is manual and
it can be edited with the Part Properties function. The Object ID format can be
updated with Update Drawing Data function.
User Preferences
This function is used for defining the user-specific information.
Database path the directory from which the databases are searched when
products are selected to the project.
Search circle this setting defines the size of the search circle. The
searching routine works in all views and coordinate settings. If there is only
one component in the search area, it is selected. If there are several
components in the search area, a selection list opens, and the component that
is closest to the cursor is the first item in the list.
IFC Export
About IFC
IFC (Industry Foundation Classes) is an international standard for defining the
product models in the building services. It is a method for sharing and
distributing the information between different software applications.
A MagiCAD drawing can be saved in the IFC format and this way transferred
e.g. to the CAD application that is used by the architect. The geometrical and
technical information of electrical and HVAC objects are transferred with the
help of an IFC file.
IFC 2x3 IFC 2x3 format guarantees even better and faster
functionality, and more information is written to the IFC file.
IFC 2x2 final IFC 2x2 format is used if data will be imported to the
software that does not support IFC 2x3 format
WCS World Coordinate System. Select this option if you are not sure
about the origin.
Add own properties MagiCADs own property sets enlarge the size
of the IFC files rather much. Therefore it is possible to choose whether
to include MagiCAD's own property sets in IFC Export.
Use extruded ducts, pipes and sewers MagiCAD IFC Export uses
mostly parametric geometry instead of faces. This makes IFC files use
less memory, disk space and time when they are imported to external
software. Because all applications with IFC import cannot handle
parametric geometry there is a possibility to set that MagiCAD IFC
Export uses extruded ducts, pipes and sewers in the IFC file.
With this function you can write MagiCAD HP&V objects to an existing IFC
file. An IFC file can be, for example, provided by the architect or created with
MagiCAD Room.
If the storey list has been defined to the IFC file (with architectural application or
with MagiCAD Room), select the storey where you want to place the objects. If
storeys are not defined in the IFC file, each storey must be saved to a separate
IFC file.
Remove building system parts from file
With this option you can remove MagiCAD objects (electrical and HVAC
objects) from an existing IFC file.
Duct size
Insulation
Status. The status types are user-defined. You can choose the
status while drawing the ducts/pipes or you can determine it
afterwards with Change Properties. -Not defined- status
means that MagiCAD uses the normal settings.
Angle to give the snap angle. It is possible to give the snap angle
either by showing the direction with the mouse or typing the value
as degrees (0-360). It is also possible to use different methods to
show the angle: With Two points, by MagiCAD Object or in
relation to the current angle (Relative).
Last option grips to the end of the last drawn duct, last drawn air
terminal device, or similar.
You can give the start point either by pointing with a mouse or typing the
coordinates in the command line. If the Connect option is off, MagiCAD asks
the system and height level information. Select the system from a list, and give
the height level either by giving it as a number or using the Top of..., Center of...
or Bottom of...option (show a MagiCAD object). You can also use button From
Part..., which copies height, system, duct series, duct size, locking and
swapping status and insulation series from another duct. It is possible to select
objects also from reference drawings.
When Connect option is on, the search circle is visible; MagiCAD assumes that
the duct's start point is connected to a ductwork component. After you have
shown a point, MagiCAD searches for the suitable components inside the search
circle. If you connect to a vertical duct and the viewpoint is from the top,
MagiCAD asks the connection height level.
If there is only one component within the search area, the duct will connect to it.
If there is more than one component, the selection list will appear.
When connected to the end of a duct or to an air device, MagiCAD checks that
the duct size and insulation options match. If they do not match, MagiCAD asks
for further actions in a dialog.
You can either Retain the active options or Change them to match a duct you
select.
After you have given the start point, the command line options change and the
endpoint is expected. The command line options depend on the start point. When
you start from the end of a duct, the new options are
Special connection prompts you to show the end of the other duct.
MagiCAD calculates all possible alternatives of the connections
made with standard parts. When you select the connection
alternative from the list, it is drawn immediately. You can accept
the connection by selecting Use selected standard angles, or you
can reject the connection. You can also make a Special reduction
between the selected duct ends.
Back, when the counterpart can be read to the drawing that is at the
same height and behind the current drawing (that is, below on the
screen).
After you have accepted the flow connection information, MagiCAD checks that
there is not a connection with the same number and direction. The drawing can
thus contain e.g. connection node with number 10 both upwards and downwards.
If the connection number is already in use, the dialog opens again.
The use of special connections has some limitations:
1.
The duct ends must be "in front of each other" to avoid reductions
inside the ducts. In the example below, duct 1 can be connected to
duct A, but duct 2 can not (its outline is behind duct A)
A
1
2
2.
The ducts must lead enough towards each other. If the angle
between the ducts is less than 90, connection is not allowed. Ducts
1 and 2 can be connected to duct A, but duct 3 can not.
1
A
After you have given the endpoint, MagiCAD checks the route between the start
and endpoints, and if necessary, changes (smart routing) or rejects it. The most
typical reason for rejecting a route is that there are components that do not fit
into the route, or MagiCAD does not find the bends needed for the route. If the
start point is an air device, a distribution box or a connection node, MagiCAD
may reject the route if you have chosen an unsuitable direction.
MagiCAD asks the endpoint until you cancel the function or the route ends up to
a duct, air device or distribution box. If necessary, MagiCAD installs a reducer
when the duct connects to an air device.
You can end drawing by pressing ESC when MagiCAD asks for a start point.
You can also end drawing by giving another command when MagiCAD asks for
the endpoint.
AutoCAD's UNDO command removes all the ductwork components that you
have placed during the current duct drawing session.
Ductwork Components
The components are classified as flow dampers, fire dampers, silencers, fans and
other (user-defined) ductwork components.
Select the component from the project's product database. Install the component
by showing the duct where you want to connect the component. MagiCAD will
then search the component with the most suitable size, and uses reducers if
necessary. MagiCAD also checks that the component fits into the selected
location in the duct. You can connect a bend-type silencer only to a 90 bend.
Sound calculation uses the sound level from the fan (if found) instead of the
sound levels defined in the project.
Fan cannot be moved with MAGIMOV. However, it can be moved with
AutoCAD commands MOVE and STRETCH, if the connected duct is also the
selection set.
Distribution Box
MagiCAD asks the box dimensions first. The command line will then contain the
box dimensions and the installation options:
It is now possible to edit the size of the distribution box after installation. This
can be done by moving the new grips (in the center of sides) and also in the Part
Properties dialog (double-click the distribution box). The Part Properties dialog
has a new button Size, which opens a dialog for entering the new dimensions.
Changing the size with the Part Properties function keeps the center point of the
distribution box as it is. The minimum size for a distribution box is
100x100x100 mm. Change of the size is rejected if the connected duct lengths
would be under the minimum duct length.
It is possible to install a connection box to either a horizontal or a vertical duct.
MagiCAD checks that there is enough space for installation, and that the duct is
not slantwise in the vertical direction.
It is also possible to install a distribution box to an empty space. MagiCAD then
asks the height level and the system.
The perpendicular of the distribution box should always be in upright position.
Although it is possible to slant the box, it is not recommended since that would
cause errors in duct connections.
When the box installed to a vertical duct, the direction of the box is not changed.
It is possible to join up to fifty ducts to a box.
Cleaning Cover
You can install a cleaning cover to distribution boxes, ducts, branches, plugs,
and bends. Plug, accessory, and component types are supported.
The cleaning cover of a distribution box will always be placed in the middle of
the upper side.
Flow Arrow
The flow arrows can be placed to an empty space or beside air devices.
Options can be used to define whether the arrows are drawn for
outdoor air, supply air, extract air, exhaust air, or other situations
(Not connected).
First, select a suitable device type and give the airflow. MagiCAD shows the
existing sizes in a selection list, and you can select the most suitable size.
MagiCAD shows the velocity in the connecting duct when the desired airflow
has been given.
The selection list containing the air devices in the project's product database will
then appear. See further information about product databases in chapter
"Selecting products for the project". It is also possible to select products in all
installation dialogs. Click the right mouse button in the installation window and
click the Select product to project... button.
When selecting a device, it is possible to look at its dimensions, pressure
drop/sound curves, and shape. The airflow appears in the diagram as a blue
vertical line. When the air device consists of a diffuser and a plenum box, you
can modify their distance in relation to each other.
The possible alternatives for the Placement are also showed in the dialog. When
the installation location is selected, the device rotates to the default orientation of
placement. If the device is placed to an empty space, the Orientation can be
selected from four main directions or it can be defined freely (Free).
Place the device by either showing the location with a mouse or giving the
coordinates in the command line. MagiCAD shows the type of the device and
the size of the connection duct during placing. The installation options are:
When you install the device to an empty space, MagiCAD asks the system and
height level. You can give the height level according to the top level, bottom
level or connection of the device.
When the connection option is on, MagiCAD moves the installation point to the
connection point and installs the device at the end of the duct or to the middle of
the duct. MagiCAD automatically installs a reducer if the duct size and device
size do not match. When the device is installed to the middle of the duct, the
device is installed directly to the duct without a T-piece or other part. Select the
placement for the device. If you show to the side of the duct, the device will be
installed to the selected side directly to the duct. If you show to the same
direction as the duct, the device will be installed above or below the duct
depending on the direction you show.
Pipe Series
Size
Locked
Status: The status types are user-defined. You can choose the status
while drawing the ducts/pipes or you can determine it afterwards with
Change Properties. -Not defined- status means that MagiCAD uses the
normal settings.
Radius for flexible pipes: It is now possible to use manual Radius for
the flexible pipes (heating/cooling, water and sprinkler). The radius is
still at least the minimum R/D value defined in the pipe series.
Manual: Pipe positioning from cursor pipe settings are used after
the vertical pipes.
Top (cursor pipe below): The cursor pipe is always below if you
continue drawing in line with the vertical pipes. Otherwise, the
pipes are side by side.
Smart (no crossing): The pipe order is chosen so that the pipes do
not cross.
Pipe positioning from cursor pipe defines the direction of the other
pipe in relation to the cursor pipe in the drawing direction. The cursor
pipe is the pipe whose route is drawn.
When you have given these options, MagiCAD asks the start point showing the
pipe sizes, locking (*), insulations, distance between the pipe centerlines, and the
options at the command line:
Angle for selecting the snap angle. You can give the snap angle either
by showing it with the mouse or typing it as degrees 0-360. You can
also select other showing methods with the additional options: with Two
points, according to MagiCAD Object, or in relation to the current
angle (Relative).
Last grips to the last drawn free end of pipe, last drawn radiator, or
similar.
You can give the start point either by showing it with the mouse or by typing the
coordinates at the command prompt. If the Connect option is off, MagiCAD asks
the system and the height level of the cursor pipe. MagiCAD also shows the
height level of the other pipe. Select the system from the list, and give the height
level either as a numeric value or using the Top of..., Center of... or Bottom of...
function (show a MagiCAD object). It is possible to select objects also from
reference drawings.
When you click OK, MagiCAD asks the next point.
If the Connect option is on, the cursor has the search circle. MagiCAD assumes
that the start points of the pipes are connected to pipe components. After you
have showed the location, MagiCAD searches the suitable parts within the
search area. If the viewpoint is from above and you are connecting to a vertical
pipe, MagiCAD asks the connection height.
MagiCAD asks you to show the start point, first from the cursor pipe and then
from the other pipe. MagiCAD selects both pipes if they are inside the search
circle. If only one suitable part exists inside the search circle, MagiCAD
connects the pipes to it. If there are several parts inside the area, a selection list
will open.
You can change the design options during drawing by selecting Options. You
can also change the pipe spacing, which changes the distance between the cursor
pipe and the other pipe (Pipe positioning from cursor pipe).
After you have given the start point, the command line options change and
MagiCAD asks the endpoint of the pipe. The command line options vary
according to the start point. If you start drawing from a pipe end, the new options
are
*
Special connection prompts you to show the end of the other pipe or
sewer. MagiCAD calculates all possible alternatives of the connections
made with standard parts. When you select the connection alternative
from the list, it is drawn immediately. You can accept the connection by
selecting Use selected standard angles, or you can reject the
connection. You can also make a Special reduction between the
selected pipe ends. In special connection for sewers standard angles 90
and 60 are divided into two 45 and 30 bends with 100 mm straight
sewer pipe between them. The selection list of the connection shows the
fall of the main pipe from the first selected to the last selected. Note!
This works only with 1-pipe drawing.
coMponent to install the pipe component while drawing the pipe. Note!
This works only with 1-pipe drawing.
If the start point is not a pipe end, you cannot select the Plug and Connection
node options.
Height level change (Z) opens a dialog where you can give the height level of the
cursor pipe end.
Start point H indicates the height level of the cursor pipe's start point. Cursor
pipe height level indicates the height level of the endpoint (center point of the
pipe).
After height level change, MagiCAD does not perform standard routing. The
pipes are drawn directly between the start point and the end point. MagiCAD,
however, checks that all parts fit into the desired route.
If the start point of the pipe pair is not connected anywhere, MagiCAD asks the
direction of the other pipe in relation to the cursor pipe. You can give the
direction either by showing it with the mouse or giving it as degrees 0-360.
Back removes the pipes and their bends/components you have drawn during the
current drawing session. You can remove the pipes until a branch (T-branch, Xbranch), radiator, or other similar device.
Connection node asks the ID number of the flow connection (separately for
supply and return pipes), description text and direction. MagiCAD suggests the
largest unused ID number, and the direction according to the location of the
connection and the direction of the preceding pipes. The possible directions are:
*
This, when the counterpart is in the same drawing. In this case, both
counterparts have the same ID number.
Front, when the counterpart can be read from the drawing that is in
front of the current drawing (that is, above on the screen).
Back, when the counterpart can be read from the drawing that is behind
the current drawing (that is, below on the screen).
After you have accepted the connection node, MagiCAD checks that the drawing
does not contain a connection with the same ID and the same direction. The
drawing can thus contain e.g. connection node with number 10 both upwards and
downwards. You can and actually should always give the same number for
the supply/return pipe pairs. If the connection number is already in use,
MagiCAD returns to the input dialog.
After you have given the end point, MagiCAD checks, changes if necessary
(smart routing), or rejects the route between the start point and the end point.
The most typical reason for rejecting the route is that not all of the parts fit into
the route. If you start from a radiator or a flow connection, MagiCAD may reject
the route if the direction you show is impossible.
MagiCAD asks the endpoint until you cancel the function or the route ends to
pipes or a radiator.
When the function asks for a start point, you can cancel by pressing ESC. You
can also quit the drawing function by giving another MagiCAD command when
MagiCAD asks for the endpoint.
Radiator connections
All radiator connections are made either by starting pipe drawing from a radiator
or ending drawing to a radiator. You can connect to radiators with either two
pipes or one pipe at a time. The pipes leave the radiator to the direction that is
defined while placing the radiator (see also chapter "Radiator").
AutoCADs UNDO removes all pipe system components that you have placed
during the active drawing session.
Flexible pipes
When so-called flexible pipes are drawn (the pipe series is defined as flexible),
the radius of the bend is defined as follows:
Draw straight pipe sections. MagiCAD selects the shorter from the two
consecutive pipe sections and defines its midpoint. The start point and endpoint
of the arc are defined according to the distance between the midpoint and the
"corner" of the pipe sections.
Radiator
You can place a heating system radiator with this command.
First, choose the heating system where you wish to add a radiator. Next, choose
the radiator type, and give the desired heating power and dimensions (or
alternatively let MagiCAD size the radiator).
Size the radiator by choosing Select size in the radiator dialog. The sizing
function targets to the radiator type you have selected in the dialog. The sizing
opens a dialog where you give the minimum/maximum lengths,
minimum/maximum heights, and the percentage (minimum/maximum) power
limits of the radiator. MagiCAD shows the radiators that match these criteria. If
you change these criteria, you get the new list of the suitable radiators by
pressing the Calculate button.
There is a checkbox Show all products in the Radiator Sizing dialog. If the
option is selected, all products that fulfill the criteria are shown. If the Show all
products option is not selected, only the product which is selected in the
Radiator Selection dialog is shown. Also the in result list there are new
columns: Code and Product.
MagiCAD shows the possible pipe connection points at the radiator. You can
switch the inlet/outlet connections with the arrow buttons. With the Rotate
function, you can rotate the radiator to upright position. With the Mirror
function, you can move the connection points to the other side of the radiator (if
there are connection in the both sides).
The default size of the connection pipe is set in the Connection size field.
MagiCAD selects this size or the nearest match from the pipe series. The size of
the connection pipe remains the same until the first branch even after sizing (if it
is not locked as another size).
In this dialog you can choose to draw or not to draw a symbol for the radiator
valve. With the Filled selection you can define the radiator symbol filled or
unfilled. Select also the valve type and valve size in this dialog. With the
Properties function, you can see the pressure loss characteristics of the selected
valve.
Place the radiator by showing its place and giving its height level and description
in a separate dialog.
Direction option defines the radiator direction in the drawing.
Options returns to the radiator dialog.
You can examine and change the properties of the radiator with the Part
properties function (MAGIPPR). The size, type, and capacity demand of the
(connected or unconnected) radiator can be changed. It is also possible to affect
the drawing method of the radiator and valve.
It is possible to change the connection points and position of an unconnected
radiator. When you change the size, the midpoint of the lower edge remains the
same.
Valve
Use this function for placing a radiator valve, zone valve, stop valve, or other
valve.
Select the valve group in the Valve Selection dialog. MagiCAD opens a list that
contains the valves that belong to the group and you have selected to the project.
You can choose the drawing symbol for the valve. With the Properties function,
you can examine the flow information of the valve.
You can model your own 2D symbols for the valves. When you click the
UserSymbol button, you can start selecting/creating/modifying symbols. For
further information, see chapter "Modeling 2D symbols".
Place the valve by showing the pipe. MagiCAD selects the most suitable size for
the valve. MagiCAD also uses the actual length of the valve to ensure that the
valve fits into the chosen place. When you place the valve to the pipe, you can
choose its direction by showing it with the mouse.
3D valves and components can be used in 2D and 3D modes, if 3D geometry has
been modeled for the product.
When the valve/component is placed, it is shown as a 1D symbol when it is
"dragged", even the 2D or 3D mode is on (it is then possible to choose the right
direction for the 1D symbol). There are four alternatives for the direction of the
3D symbol:
1.
2.
3.
4.
Manifold Pipe
Manifold is a pipe part with the main connection and a variable number of subpipes with equal distances between the sub-pipes. The directions of the main
pipe and sub-pipes can be changed individually. The number of sub-pipes and
also other options can be later changed with the Part Properties function. Only
main manifold size is predefined. Manifold sub-pipes are treated as branches in
the calculations.
Sprinkler
Use this function to place the sprinklers.
Select the sprinkler from the list. The list contains the K value, nominal release
temperature, response time index, and connection size of each sprinkler. Select
the system and installation height. Orientation can be selected if there are several
alternatives.
Choose the status if needed. It can also be determined afterwards with Change
Properties. -Not defined- status means that MagiCAD uses the normal
settings.
Select the drawing symbol from the bottom of the dialog. You can also model
your own symbols for the sprinklers. Click the User Symbol button to
select/modify/create the symbols. See chapter Modeling 2D symbols for further
information.
If you want to present the vertical connection pipes of the sprinklers in the
drawings, select the Use vertical pipe symbols option. In this case, in addition to
the sprinkler symbol a filled circle is drawn to present the pipe that is leading
upwards from the trunk pipe and an unfilled circle is drawn to present the pipe
that is leading downwards. If the sprinkler is connected directly to the trunk pipe
(with a T-branch), the additional symbol does not appear.
You can use the following commandline options when you place the sprinkler:
The sprinkler can be placed to an empty space, to the end of the pipe, or to the
middle of the pipe. When the sprinkler is placed to the end of the pipe, it rotates
to the same direction as the pipe. When the sprinkler is placed to the middle of
the pipe, it is installed directly to the trunk pipe with a T-piece to the orientation
that is selected in the installation dialog (upwards/downwards).
When you use the Array option, give the area where the sprinklers will be
installed. MagiCAD checks how many service areas fit in the area and places
the sprinklers.
Sprinkler pipe
This function is used to draw sprinkler pipes and connect individual sprinklers.
When the function is used for the first time, the following design options are
given:
Pipe Series
Size
Locked
Status: The status types are user-defined. You can choose the status
while drawing the ducts/pipes or you can determine it afterwards with
Change Properties. -Not defined- status means that MagiCAD uses the
normal settings.
Radius for flexible pipes: It is possible to use manual Radius for the
flexible pipes (heating/cooling, water and sprinkler). The radius is still
at least the minimum R/D value defined in the pipe series.
Fall: The fall is given as per mill. The direction is selected between
Downwards and Upwards. Usually it is recommended to draw the
sprinkler pipes horizontally, because they can be then modified
afterwards more freely. In this case, give zero as the fall.
When the options have been given, MagiCAD prompts to show the start point of
the pipe, showing the pipe size, locking (*), insulation, and the possible options:
Angle to select the snap angle. The angle can be showed with the
mouse or by typing the degrees (0..360). With the additional options it
is also possible to select the following angle definitions: with two points
(Two points), according to a MagiCAD object (Object) or in relation to
the active angle (Relative).
Last to grip to the last drawn free end of pipe, last drawn sprinkler, or
similar.
When you have showed the start point, the commandline options change and
MagiCAD waits for the endpoint of the pipe. The commandline options vary
according to the start point. If you start drawing from the middle of the pipe, the
following options appear on the commandline:
If the start point is not an end of a pipe, Plug and Connection node options
cannot be selected. In general, sprinkler pipe drawing is similar to the drawing
method of other pipes. See, for example, chapter Supply and Return Pipes.
NB: If drawing is started from a sprinkler, MagiCAD always selects at least a
25mm pipe.
The major differences compared to 2-pipe drawing are that you choose the pipes
and insulations for three pipes, and you define two pipe spacings. Furthermore,
the synchronizing option, which you can use in 2-pipe drawing, is not available
in 3-pipe drawing.
Tap water point connections
Make the tap water point connections by starting/ending drawing from/to the
water point. You can connect to the water points either with one pipe or with two
pipes (if the water point has two connection points) at a time. The pipes can
leave the water points to any direction.
Connection to a water radiator
Make the radiator connections by starting/ending drawing from/to the radiator.
You can connect to the radiators either with one or two pipes at a time. The pipes
leave the radiator to the directions that you selected when you placed the radiator
(See chapter Radiator).
Connection to a circulation water pipe
When you intend to make a connection between hot water and circulation water,
draw hot water pipe. You can then choose the ReturnJoint command line option.
When you select this option, MagiCAD asks the power of the connection.
MagiCAD calculates the flow rate using this power and the differential
temperature of the system, and draws a short circulation water pipe. You can
continue drawing the circulation pipe with the 1-pipe drawing function.
Connecting the hot water pipe to a cold water pipe
When you intend to make a connection between hot water and cold water, draw
cold water pipe. You can then choose the hotwaterJoint command line option.
When you select this option, MagiCAD automatically draws a short hot water
pipe, and you can continue drawing from it with the 1-pipe drawing function.
Instead of hotwaterJoint it is possible to use the Substation functionality for this
in MagiCAD 2008.5 (and newer).
You can freely move the water/sewer points after placing them.
Water Radiator
Use this function to insert radiators for hot water systems.
The functions are the same as with heating system radiators (see chapter
"Radiator").
Insert Substation
With this function you can define a substation, which can contain the desired
number of heating circuits and water heaters. You can connect the heating and
water pipes to the substation, so open ends are not needed except the cold water
pipe that is entering the building. Neither it is necessary to use old kind of hot
water joints any more.
General All general settings, that apply to the whole substation, are made
here:
o
Product Code This is the product code for the whole unit and it is
shown in bill of material list. This is obligatory setting.
Heat Exchangers All the heat exchangers which this substation includes.
New heat exchangers are added with the Heating/Cooling button, and new
domestic water heaters are added with the Tap water... button. See more
information below.
Dimensions Give dimensions for the substation, and set the locations of
the connection points.
Side with rotate button you can choose the side, where the pipe
should be
Distance from left edge you can give the accurate value here, or
you can also drag the connection in a preview window.
Distance from bottom edge you can give the accurate value
here, or you can also drag the connection in a preview window.
Heat Exchangers
Heating/Cooling
General
o
ptot [kPa] Total pressure loss of the system. A suitable pump can
be selected using this information.
Tap water
General
o
Edit Substation
With this function you can edit the existing substations.
Sewage Pipe
Use this function to draw sewage pipes.
When you use this command for the first time, MagiCAD asks for the design
options:
Pipe series
Size
Locked
Status: The status types are user-defined. You can choose the status
while drawing the ducts/pipes or you can determine it afterwards with
Change Properties. -Not defined- status means that MagiCAD uses the
normal settings.
Routing Smart always tends to use standard bends (15, 30, and 45). If the
angle is more than 90, MagiCAD can use two standard bends. 45 bend is
always used with T-branches. If you have drawn the sewer with a fall, MagiCAD
concludes the direction of the branch bevel from the sewer fall. On the other
hand, if you have drawn the sewer without a fall, MagiCAD concludes the
direction of the branch bevel from the point that you show from the main sewer.
In this case, AutoCAD's ORTHO must be Off.
The drawing options are the same as in the other pipe drawing functions.
When you connect vertical pipes to horizontal sewers, MagiCAD
shortens/lengthens the vertical pipes so that you can make the connection with
the selected sewer fall and standard parts.
If you start drawing from a sewer point, the next point is not connected, and you
draw sideways, MagiCAD makes the connection automatically to the center of
the sewer point's side. If you draw downwards, MagiCAD makes the connection
to the center of the sewer point's bottom. If you start drawing from a sewer point
and connect to a sewer pipe without showing any points between, MagiCAD
concludes the connection method according to the height levels. If the sewer
point is sufficiently below the storey surface (that is, there is enough space to the
sewer), MagiCAD makes the connection to the sewer point's size; otherwise,
MagiCAD makes the connection to the sewer point's bottom.
Sometimes, if the sewer point is very close to the sewer you try to connect, you
cannot use standard parts for the connection. In these cases, try to connect
downstream.
Routing Direct does not try to use standard parts. It always makes the bends
exactly how you draw them. MagiCAD makes the connections directly between
the showed points and ignores the defined sewer falls. In these cases, the sewer
has the fall according to the height levels of the start and endpoints.
The Polar tracking feature of AutoCAD 2000 is a convenient tool if 15, 30 and
45 bends are used. You can easily draw the sewers with the desired bends.
Modeling 2D symbols
You can model new symbols for valves and other pipe/sewer components. These
symbols are in use in the wireframe (1D) mode.
Start modeling by clicking the User Symbol button. You can restore the default
symbol to the part with the Reset symbol button.
The insertion point of the symbol is in the middle in x and y direction.
First, select one of the symbols that appear in the installation dialog, and select a
symbol. The User symbol button activates. When you click the button, the Select
Symbol dialog opens. The dialog is divided into two panes.
In the left pane you can group the modeled symbol as a tree. Grouping the
symbol is not required, but it makes it easier to handle various kinds of symbols.
When you select a symbol group in the left pane, the symbols belonging to that
group appear in the right pane.
The groups and their possible subgroups are managed with the following
buttons:
Rename Group
The symbols in the right pane are managed with the following buttons:
Edit Symbol
Copy Symbol
Edit menu
Part Properties
With this function, you can examine or edit the properties of an individual part.
The properties vary according to the part type.
It is possible to open the Part Properties dialog by double-clicking the object.
You can also open the Part Properties dialog from AutoCAD shortcut menu
(right mouse click). That is, if the selection set contains any MagiCAD objects
and if several objects are selected, you can select the object from the Select Part
dialog.
This feature is not available for revision arrow.
Part Properties using double-click is available only in AutoCAD 2007 and
AutoCAD 2008 platforms.
Change the Running index, height position, insulation series and also duct/pipe
series, size, lock and swap status for ducts and pipes in the Part Properties
dialog with buttons: Change Z, Change size, Change insulation and
Change RI.
It is possible to change Z. only in the top view.
Use the Change Properties functions to change the properties of connectors,
bends, T-branches, plugs, etc.
With this function it is possible to give airflow for an air device, or airflow and
pressure loss for an unconnected flow connection (Destination=NONE). It is also
possible to affect the appearance of certain air devices and change the size of an
air terminal device.
You can resize the radiators and lock the pressure drops of radiator/zone valves,
air terminal devices, and flow regulators. It is also possible to lock and change
the sizes of these valves.
You can change the settings of a cross-section by showing the section mark or
the boundary box. The cross-section is updated by showing the boundary of the
actual cross-section.
Note the following if you change the Connection node ID with the Part
Properties function:
If the connection node is connected to another drawing, it is disconnected. The
connection nodes can be reconnected when they have the same ID again.
You can also examine the information in a reference drawing. Select Xref from
the menu.
Branch Copy
You can use this function to copy branches or entire systems that are completely
in the active drawing.
First, show the start point (root node) of the branch. The start point can be, for
example, a connector (T-branch, bend, reducer) or an open duct/pipe end. Next,
show the duct or pipe where the area continues (segment). When you copy a
heating/cooling/waterpipe branch, do this for each pipe separately. In case of
water system pipes, the order is coldwarmcircular, but you can select any of
these pipes as the first.
The parts that you copy then appear with dashed line.
The command line options:
Basepoint Show the basepoint for the copying function. Next, show
the new location for the basepoint (ie. Reference point) either at the
command line or showing it with the mouse.
You can repeat the copying with a single command as many times as necessary.
Branch Erase
Select the branch as in the Branch Copy function. When you show the direction
(duct or pipe), MagiCAD removes the branch and connects the ducts/pipes
together at the branch location.
You can copy or erase branch only with one duct/pipe at a time. For example,
when you erase branches in heating systems, you must erase the supply pipe and
return pipe separately.
Part Erase
This function removes ducts/pipes, components, and other parts.
If there are several parts in the showed place, MagiCAD shows a list of the parts
you can remove. It is not possible to remove reducers, bends or branches with
this function.
You can also remove the storey origin in the project dialog by unselecting the
project.
Move Parts
This function moves ducts/pipes, components, and other parts.
You can move an air device, a radiator or a component only in the direction of
the duct/pipe.
Command line option:
Side Movement
Use this function to change the reducers of the duct lines or the pipelines
eccentric. The function targets to one duct line or pipe line at a time. After you
have selected the line, you can show the side of the alignment, or you can choose
the following option at the command prompt:
In the following illustration, the left picture represents the ducts before the side
movement. The right picture represents "align top". The alignment is made
according to the largest duct. Side movement can be done also with AutoCAD
command stretch.
Change Properties
A list of the variables that you can change forms according to the selected
property group.
Common variables (excluding Dimtext properties):
*
UserVar1 and UserVar2 fields are used for setting the user-defined
fields of the selected parts. You can use the user-defined fields eg. for
controlling the calculation of the bill of materials.
Drawing mode locks the drawing mode of the part. The available
options are:
* By drawing (the drawing mode is predetermined by the drawing mode
that is defined for the project. See also chapter "Drawing Preferences")
* 1D (shows the ducts/pipes as lines and the other parts in the workdrawing mode represents the work-drawing mode in the piping
systems)
* 2D (shows the part in Active2D mode, which represents the workdrawing mode in the ductworks)
* 3D (shows the parts in 3D)
Duct/Pipe size changes the sizes of the selected ducts/pipes. The series,
size, height/width swapping with rectangular ducts, and locking are
selected in this dialog. MagiCAD automatically sizes the parts that
connect to the changed ducts/pipes.
Lock duct/pipe size: the sizing does not change the sizes of the locked
ducts/pipes.
Insulation series sets the selected insulation series to the selected parts.
1D/2D Edge line type changes the outline type of the selected parts.
1D/2D Detail line type changes the detail line type of the selected
parts.
1D/2D Edge line color changes the outline color of the selected parts.
1D/2D Detail line color changes the detail line color of the selected
parts.
Bend type changes the selected bends to match the definitions you have
given in the dialog.
Branch type changes the selected branches to match the definitions you
have given in the dialog.
Reduction length
Bend R/D defines the ratio of the bend radius and the duct diameter.
Air device flow for changing the air flow for many devices
Reduction length
Power for other pipe device changes the power of the selected
devices
Bend R/D defines the ratio of the bend radius and the pipe
diameter.
Bend R/D defines the ratio of the bend radius and the pipe diameter.
Scale Dimtext height scales the height of the selected dimension texts.
Dimtext style changes the text style of the selected dimension texts.
Ref.line symbol scale factor changes the scale factor for the dimension
text reference line symbol
Single Part Searching one part. If there are several parts at the
same location, a selection list opens.
Network Selecting all parts that are connected to the part either
directly or through other parts.
You can combine these search options and also use them with AutoCADs
search.
Both the old and new products must be selected to the project. You can also use
this function for changing the UserCode. In this case, the product is selected
twice using different UserCodes. It is then possible to replace the product with
itself so that the new product has the desired UserCode. Select the old product
to the field on the left side, and the new product to the field on the right side.
Information of the replaced products appears on the command line after
replacing.
Joint Part
You can divide a duct/pipe into separate parts by inserting a node (i.e. joint part).
By using nodes, it is possible to eg. divide a duct/pipe into several parts with
different modes of insulation visibility or different dimensions.
Connect Node
Connect connection nodes by selecting the drawing where the connection nodes
will connect. MagiCAD outputs the name of the drawing where the counterpart
exists.
The window shows the active directory, which contains drawings whose
connection nodes you can connect to the current drawing (by default, the same
directory as the directory of the current drawing). You can connect connection
nodes from any directory.
You can direct connection node connection to a particular system, or you can
search the connection nodes from all systems. You can also direct connection
node search to a particular part of the active drawing.
The counterparts that belong to the same system and have the same ID number
are connected. If the drawing, where the connections are searched from, contains
an unconnected connection node that directs to the open drawing, a new
connection node is created to the open drawing. This means that new connection
nodes can appear to the drawing when the connection is made.
A vertical connection node appears as a duct/pipe end in the work-drawing
mode.
Storey dimensions can be ignored when importing connection nodes. If Ignore
storey deminsion is enabled then the storey dimensions are not taken into
account when importing connection nodes. This allows importing connection
nodes outside the storey boundaries and whose direction can be any.
The drawing where the connection nodes are search from must not be read-only.
You must also be able to write to the layers of the systems you are connecting.
The connection status appears on the command line. If there errors occur during
the connection, an error message dialog will open.
See also chapters Duct and Supply and return pipes.
NOTE ! If you change the Connection node ID with the Part Properties
function. If the connection node is connected to another drawing, it is
disconnected. The connection nodes can be reconnected when they have the
same ID again.
Disconnect Node
For connection node disconnection, you can select one of the drawings or all
drawings.
You can also disconnect the connection nodes of a particular system or a
selected area.
The counterpart of the connection node disconnects if the drawing in question
can be opened.
The number of disconnections appears on the command line.
Dimension Texts
Choose the drawing options from the command line (or from the menu that
opens with a right-click):
When you have selected the part for the dimension text, you can also use the
following options:
Adding up the flows of the air devices is done only if the first part that is
selected to the dimension line is an air device.
It is possible to select only air devices to the dimension line, if the first selected
part is an air device and adding the air devices is set as the active style.
Dimension line texts are defined according to the active style of each part. The
active style can be used from the project or from the drawing. This is done by
User Preferences setting Use active dimension text settings from Drawing /
Project. This prevents changing other users active dimension text in multi-user
projects.
You can also underline/overline the dimension texts with the Part Properties
function.
min D defines the minimum size for the duct/pipe that will have
the dimension text
max D defines the maximum size for the duct/pipe that will have
the dimension text
min L defines the minimum length for the duct/pipe that will have
the dimension text
Text direction selections affect the orientation of the dimension texts, and their
position in relation to the object.
dx- ja dy values define the location of the dimension text in relation to the object.
If either Parallel to... is selected, dx is the direction of the object.
Next Free gives the next free number. If you have decided
to allow the same numbers in different systems, the system is
asked.
Use the same number for all indexes if this option is selected, you
can insert the same numbers as many times as you want.
When the settings have been defined, insert the running index to objects by
selecting Install. After installing the running index to the first object, object type
is locked for this installing session. It means that when you install the running
index e.g. to zone valve, also the next object has to be zone valve. MagiCAD
does not give any other object types to the selection. When you quit and restart
the command, the object type locking is released.
File Status Empty: drawing is opened and ready for editing (editing
of other than the current dwg is not possible in MagiCAD Electrical);
Not opened: not opened, but it could be opened;
Locked: someone else has opened the drawing
It is possible to select several rows by using the Shift -ja Ctrl buttons. By using
the Select All button you can select all rows, and with the Deselect All button
you can deselect all rows.
Current Values of Selected The first and last number of the selected
Indexes.
New Values If you want to renumber the indexes, you can either give the
new first or last number and press the Apply button. Gaps are removed, if
Remove gaps is selected.
Sections menu
Section Marks
With this function, the cross-section areas are defined and cross-section marks
are drawn.
The Text feature of the cross-section can consist of max. eight characters (also
small caps can be used). You can also give a Description for the cross-section.
The cross-section area is defined with three dimensions:
Lower Z the height level of the lower surface in relation to the storey
origin
Upper Z the height level of the upper surface in relation to the storey
origin
You can also select the type of the section. It can be either a conventional section
type (Section) or detailed drawing (Detail).
The detail drawing retains its original orientation, whereas the section is rotated
so that it is looked from the side.
If you select the detailed section, define the area by drawing crossline around it,
and finally close the area by pressing Enter.
If SECTION MARK Show section mark boundary is selected in the Drawing
Preferences dialog, boundary box is drawn around the cross-section area.
You can move the boundaries of the cross-section (ie. boundary box), or change
its depth, by moving its corner grips or by using AutoCAD's STRETCH.
You can change the properties of the cross-section with the Part Properties
function.
The cross-section according to the settings here defined is made with the Make
Section function.
Make Section
This function creates a cross-section of the selected section marks. See chapter
Section Mark for further information.
The function prompts the parts that will be included in the cross-section:
AutoCAD objects all objects except solids are handled. The blocks
are handled as whole, ie. they are not exploded first.
AEC/ADT objects
Whether to show the name of the source drawing. It may be useful e.g.
if the cross-section is copied to another drawing.
Finally show the place for the cross-section. Before drawing the cross-section,
MagiCAD browses through the entire drawing checking which parts will be
Quick Section
This function creates a cross-section of the selected parts. First, select the parts
you want to include in the cross-section. Then show the viewpoint and the
inspection direction and set the location of the cross-section.
The parts that are included in the cross-section are not taken into account in
sizing or bill of materials. MagiCAD always shows the parts in Active2D mode
regardless of the original drawing mode.
View menu
Drawing Preferences
In the Drawing Preferences dialog you can select the active systems of the
drawing, that is, the systems that can be selected e.g. when drawing ducts or
pipes. You can also change all linetypes and colors at the same time in this
dialog and restore them to the project-specific settings.
In addition, you can set the Hide function, which is run when the drawing is
saved in MagiCAD, active in this dialog. This setting is viewport-specific, and
you must set to each viewport separately whether the hide is performed.
Enabler Options You can set the linetypes and colors of all MagiCAD
objects at the same time in the whole drawing. You can restore the original
settings by clicking the Retain settings button.
Systems select the active systems that can be available in the selection
lists of drawing and calculation functions. The objects appear in the drawing
regardless of these selections.
Auto Hide you can set active the hiding function during saving
Note: The hiding is carried out in the viewports whose Hide this viewport
when saving option is selected in the Viewport Preferences/Hide options tab.
HPV Objects in Xrefs shows HP&V objects as saved in the model space.
This allows plot drawings including hide information from also Xrefs. Note
that sometimes the drawing must be opened again, or Xrefs need to be
reloaded, to be able to see the hide information.
MagiCAD hides (or draws with dashed line) the pipes, ducts, etc that will be
behind other MagiCAD objects.
With Active2D technology, it is possible to choose the parts precisely. For
instance, MagiCAD hides only those air devices and pipe components that
actually are behind other parts. You can use the hiding function at any viewpoint
or section.
MagiCAD draws points (so-called handles) on the Defpoints layer which
represent the base points of the hidden parts . Defpoints layer is not printed,
which means that the points do not show in the printouts.
The hidden parts will be unhidden if they are, for example, copied or moved,
their insulations are changed, or if you use the Find & Replace command.
The linetype and color of the hidden line are defined in the project management.
It is possible to affect the drawing preferences of the hidden parts with the
command options:
Reset hide unhides the hidden parts visible in the selected area.
You can hide all objects in the drawing with the ALL option of the Select Object
function.
System group is the group whose products you examine. The property lines
appear on MAGI_GARBAGE layer and they disappear when the layer is
cleared.
*
Property: select the property you wish to include in the property line
from this list.
Collision Control
With this function you can examine possible collisions, for example, between
heating pipes and air ducts.
Select the collision types in the Options dialog. Open the dialog with a rightclick or with the Options (o) command line option.
Next, define the area. The collision control works in the normal plan view.
Information about the collision is gathered in the Show Messages dialog (see
chapter Error handling). With the dialog functions you can place the error ticks
to the drawing. Remove the ticks with the collision control button or with the
Clear Garbage Layer function.
You can set the minimum size for the pipes that will be checked. If one of the
colliding pipes is smaller than the limit, the collision is ignored.
It is also possible to set a tolerance for the collisions. With negative tolerance,
the parts are allowed to be inside each other, whereas with positive tolerance
space is reserved around the parts e.g. for installation or maintenance. In this
case, the bigger value of the tolerances of the colliding parts is taken into
account; for example, if the ducts have 200mm tolerance and the pipes have
100mm tolerance, sufficient distance between these two is 200mm.
You can also select MagiCAD, AutoCAD, or ADT/AEC objects (walls,
windows, etc) to the collision check. Collision check for the latter objects
requires that MagiCAD is used with AutoCAD 2006 or later, or with AutoCAD
Architecture (previously called Architectural Desktop).
In addition, it is possible to check the collisions with the objects drawn with
MagiCAD Electrical. Select Duct/Pipe/Sewer Electrical objects in the Options
dialog.
The boundaries of the collision check area can be saved. If Save collision
boundary is selected, the boundaries are saved in the layer that is reserved for
them. The markings that are selected in the message handling dialog are saved.
The layer is cleared when the collision check is run again. If you want to save
the collision boundaries, change their layer before running a new collision check.
Calculations menu
Flow Summation
This function calculates the flow rates of the systems. The water volume of the
heating/cooling system is calculated, as is done by the sizing and balancing
functions. System group indicates the system that is calculated. Flow summation
calculates one system at a time. You can select the scope of the calculations with
the following options:
*
Branch
MagiCAD asks for the start node and the duct/pipe of the branch.
With the heating and cooling systems, flow summation outputs the water volume
of the system (pipes and radiators) besides the flows. You can examine the
volume with the Part Properties function at the open ends of the supply pipes.
This function shows the volume of the entire system, not a single subsystem.
See also chapters Circular routes and Air device on the side of a duct.
After performing the calculation, MagiCAD may show a report of errors and/or
warnings in the Show Messages dialog. For further information see chapter
"Error handling".
Sizing
The sizing function always calculates the flow rates. Therefore, it is not
necessary to run the flow summation before running the sizing function.
MagiCAD calculates the systems or system branches using the sizing method
you have chosen. The scope of the calculations and the error messages are
similar to those with the Flow Summation function.
The sizing function rotates the beveled outlet collars of the rectangular ducts to
the flow direction.
When sizing the domestic water systems MagiCAD calculates the flow rate,
flow rate of the fire hydrant, and flow rate of the circulation water pipes. Cold
water piping is sized either according to the calculated flow rate or the flow rate
of the fire hydrant, depending on which one is higher. Hot water piping is sized
correspondingly either according to the flow rate or according to the circulation
water flow rate. See also Change Properties / Simultaneity %.
See also chapters Circular routes and Air device on the side of a duct.
After performing the calculation, MagiCAD may show a report of errors and/or
warnings in the Show Messages dialog. For further information see chapter
"Error handling".
Balancing
Balancing (pressure loss calculation) can be done regardless of the flow
summation being calculated or the system being sized. The balancing function
calculates the flow rates and uses the existing pipe/duct/device sizes.
The scope of the calculations and the error messages are similar to those in the
Flow Summation function.
Show the index run: when you have selected this option,
MagiCAD shows also the most significant flow route.
MagiCAD distributes the pressure loss for the consecutive so that the excessive
pressure is throttled as close to the start point of the system as possible.
However, the dampers/regulating valves always have the minimum pressure
loss, which is defined in the system-modeling dialog.
You can place the regulating valves to either the supply or the return pipe in the
heating/cooling systems.
MagiCAD also calculates the preset values of the valves. MagiCAD rounds the
result of the radiator valve or zone valve to match the nearest curve. If the valve
has only on/off positions, MagiCAD does not round the result.
If it is not possible to balance a route with the selected devices, MagiCAD shows
the device that could not be set to balance with the rest of the system (MagiCAD
places an error tick on the devices location if the device is in the active
drawing). You can see the need of additional balancing with the Part Properties
function, which shows how much the pressure at the device exceeds the
maximum pressure loss of the device.
However, it is possible to set a tolerance for the air devices, which allows
deviations from the ideal balancing situation. In this case, warning is given only
in the situations where the pressure drop from the air device at the corresponding
airflow exceeds the maximum pressure drop of the air terminal device within the
given percentage.
You can balance the ventilation/heating/cooling systems either according to the
lowest possible pressure at the open end or according to a specified fan/pump
pressure. If the given pressure is lower than the lowest possible pressure, the
given pressure is ignored.
If differential pressure valves are used in the heating/cooling system, the riser
bounded with the differential pressure valve and the measuring valve is balanced
according to the given differential pressure. In this case, the radiator valve of the
index run does not have the minimum pressure drop that is defined in the system
dialog; instead, it has the pressure drop that depends on the preset value of the
differential pressure valve. The minimum pressure drop for the differential
pressure valve in the index run is defined in the same way as for a zone valve
(the Minimum dp for zone valves [kPa] setting in the system dialog).
This function also calculates the pressures of the domestic water systems
according to the initial pressure you have defined in the system-modeling dialog.
If the flow rate of a tap water point is outside the limits of the standard flow rate
(defined in the system dialog as per cent), an error tick will appear on the tap
water point. If a circulation water pipe connects to the domestic water system,
the system is balanced as a 2-pipe system.
See also chapters Circular routes and Air device on the side of a duct.
After performing the calculation, MagiCAD may show a report of errors and/or
warnings in the Show Messages dialog. For further information see chapter
"Error handling".
Balancing of an individual branch does not result the final pressure level, but
you can use the function for examining the pressure losses of the routes within
the branch. It is however useful to see if that part of the system can in fact be
balanced rather than waiting until the whole system is complete and finding that
the minor branches will not balance properly.
MagiCAD gives a message in the Notes column if the limits you have given in
the sizing criteria and the system dialog are exceeded:
Bill of Materials
With this function you can form two kinds of lists.
With the Bill of Materials selection you can create a conventional part list on the
screen. You can create and modify more specific list with the MagiCAD Export
selection. Both list types can be copied to the clipboard, and you can also print
the on-screen bill of materials directly.
The selections made in the Bill of Materials dialog apply to both list types. You
can target the calculations on all systems, or you can select the systems. The
calculation can cover several drawings (which you can select from the list), the
active drawing, or the selected area in the active drawing. You can set filters for
the bill of materials with the user-defined UserVar1 and UserVar2 fields. You
can also define an Output header, which is also copied to the clipboard.
The selection sets can be saved. System groups, System, Area, Criteria and
Output header settings are saved with the desired name in the project database.
Select the properties (parts/devices and attributes) for the device list from the list
in the MagiCAD Export. You can save different kinds of device list templates.
Configuration
o
With the Select all and Deselect all buttons you can select all
possible part/device types and clear all selections
Include these attributes Click the green arrow to select the attributes of
the parts/devices to the list. The selected attributes appear in the Selected
attributes/columns pane.
With the Include column headers you can include the attribute
column headers in the list
With the arrow buttons you can change the locations of the
attribute columns
Copy to Clipboard copies the device list to the clipboard (and you can then
paste it to eg. Excel)
Save to File saves the device list to a directory you can choose freely. The
list is saved in .txt format, with TAB separator.
COM interface can be used for reading all MagiCAD object data directly from
the drawing e.g. with Visual Basic macros. Some information can also be written
to the drawing. The more detailed documentation of the interface is available
separately.
Flow goes up or down related to the current view (vertical flow), mirroring of
eccentric devices is done like in the picture above.
In other cases mirroring is done like in the standard mirror, but in this case the
installation point of the device will be changed like in the following pictures.
The duct has only one airflow, which is the maximum airflow.
Circular routes
Calculation functions for ductworks can now handle temporary branches that
reconnect later in the system. The parts at both ends must be common to both
branches. The common start point/endpoint can be, besides a T, X, or N branch,
a distribution box. There cannot be circular routes inside each other, and the side
route cannot contain branches.
Flow summation distributes the flowrates evenly between the branches. These
flows are used in the sizing function. At the startpoint of the circular route (i.e.
the rooms side), the minimum size restrictions are reset to make it possible to
have smaller ducts in the branches compared to the main duct.
Balancing distributes the flowrates so that the total pressure drop is the same in
all routes. Pressure drop output checks one of the routes. However, the pressure
value can be read from all parts, and e.g. it is possible to examine them with Part
Property Line (like the flowrate in the dimension line). Hence, the flowrate in
the dimension line varies according to the performed calculation type (sizing or
balancing).
All dampers in the circular route are set open and they are not used for adjusting.
Even their minimum dp value, which is defined in the system settings, is
ignored.
Sound calculation checks all routes and sums up the sounds at the connection
point. Output, however, shows only the results of the calculation in one route.
An example of a possible circular route:
Documentation menu
Type Free Text, Edit Free Text
With this function, you can add and edit short free texts and reference texts to the
drawing.
The command opens the Free Texts dialog, in which it is possible to write/edit
free text in multiple row edit field, or define the following settings to the texts:
Style: Text style (eg. font, bold, italic, effects,..) . It is possible to add
text styles to the drawing by using AutoCADs Format/Text style
function.
Reference line: if the setting is Yes then a reference line from first pick
point to text is drawn. NOTE ! It is not possible to select between
reference line and no reference line if you are editing existing text by
using command Edit Free Text.
Ref. line symbol: select a reference line symbol (target line, arrow,
dot,Line only)
Baseline:
o
Revision Arrow
You can insert revision arrows to the drawing with this function. MagiCAD will
place all revision arrows to the layer that you have defined in the layer dialog.
Revision Cloud
You can draw revision clouds to the drawing with this function. You can change
the arc length with the following option:
Construction Boundary
You can draw construction boundaries with this function. Pressing Enter stops
the crossline drawing, and MagiCAD asks the arrow direction.
COM interface
It is possible to transfer data between external programs and MagiCAD via
MagiCAD COM interface.
Example: First you design and calculate ventilation system in MagiCAD. Then it
is possible to send the flow and pressure data to an external device selection
software, in which the right device is selected. From the device selection
software it is possible to send e.g. sound data and duct connection sizes back to
MagiCAD.
AutoCAD's features
You can use the command line options with the right mouse button.
Polar tracking is a convenient tool when drawing sewers; you can use it for
drawing pipes in UCS-related angles.
Avoid using the partial open function.
Do not use the In place xref editing function for modifying MagiCAD ductwork
because the project information appears according to the host drawing and the
sizing could not be run for the drawing. You can modify a reference drawing that
is attached to the MagiCAD drawing.
Though MagiCAD has its own profile that is selected when MagiCAD is started
from its icon, a profile should be selected also when AutoCAD is started without
applications. This is because in some cases MagiCAD profile remains as the
current profile even after quitting the MagiCAD session (the previous AutoCAD
profile is not restored). For example, define a profile named acad2000 for
AutoCAD and set the target in AutoCADs shortcut in this way:
c:\acad2000\acad.exe /P acad2000
Plotting
You can use the output layouts e.g. as follows.
Move the cursor on a layout name. Open a menu by right-clicking the mouse.
Choose New Layout, and a new layout (Layout n) will invoke. When you select
the new layout, the Page Setup window will open.
If you wish to change the layout settings later, right-click the mouse on the
layout name and choose Page Setup.
You can also copy a new layout from a template (choose From Template).
Choose the plot device and style (pen assignments) in the Plot Device section of
the Page Setup window. It is recommended to use the color-dependent output
styles (.ctb files) with MagiCAD. The pen line weights can be changed with the
Edit function. Use monochrome.ctb as a basis and modify it with Edit function
when you create a black & white output layout for MagiCAD. You can set a line
weight for each color. Save the modified file with Save As function, and choose
your new file as a layout file.
Choose the paper size and plot scale (1:1) in the Layout Settings section.
The white space in the layout represents the paper, and the area bordered with
dashed line represents the plotting area (that is, paper margins). The new layout
contains one viewport, which can be modified with AutoCAD's stretch and move
commands (changing the size and location on the paper).
You can start designing the output, for example, by setting the title on the
bottom-right corner of the output area (it is already set on the template
drawings).
The viewport(s) can be fitted to the paper in the desired size. If several viewports
are going to be defined to the output, it can be done by showing the corners of
the viewports (View/Viewports/1 Viewport). The viewports are always set on the
active layer, but you can later move them on the layer that is not printed (eg.
DEFPOINTS).
Finally, set the viewports to the desired scale. It is possible to affect the
viewports by switching on the model space with the PAPER button on the lowest
gray line (it will then switch to the MODEL state). In the MODEL state, the
outlines of the active viewport appear with a darker line.
The active viewport is zoomed to the desired scale, that is, give 1/50xp as the
scaling factor if you wish to show the view in 1:50 scale. Define the scale for
each viewport separately. It is possible to move the view with Pan, and the scale
is not changed.
The layout is printed in 1:1 scale and the output can be Previewed before
plotting.
Color: White
Grease Angle: 40
Known problems
In some special cases, when some of MagiCAD layers are locked, frozen or
switched off and the system is edited, the drawing can be damaged.
While calculation or flownode connection/disconnection, the external drawing
that is referred from the current drawing may be temporarily locked. The
drawing will be unlocked when any MagiCAD command is run or when you exit
AutoCAD.
If you join to the bend with a vertical duct or pipe (in the direction of the xyz
axes of the coordinates), the part is drawn incorrectly as this release of
MagiCAD cannot draw this kind of branch.
Other issues
When copying ductworks or parts of theirs, please note that the systems and
device lists must be defined in the same way as they are in the target project.
MagiCAD Electrical
Contents
Chapter 1. List of functions
25
27
MagiCAD Electrical
Contents iii
Texts .......................................................................................................................... 36
Layer definitions........................................................................................................ 37
Report definitions ......................................................................................................39
Switchboard schematic definition ............................................................................. 40
Power circuit types .................................................................................................... 40
Connection node defaults .......................................................................................... 41
Provision for voids .................................................................................................... 41
User named variables ................................................................................................ 42
Variable sets .............................................................................................................. 42
Combining projects.................................................................................................................. 43
General ...................................................................................................................... 43
Selecting the ID range ............................................................................................... 43
Merging the projects.................................................................................................. 43
48
50
67
General..................................................................................................................................... 67
Creating a switchboard schematic ........................................................................................... 67
Switchboard schematic preview .............................................................................................. 67
Placing the switchboard schematic .......................................................................................... 69
Editing switchboard schematics............................................................................................... 72
Edit Row.................................................................................................................... 72
Insert Row ................................................................................................................. 72
Insert Circuit from Plan ............................................................................................. 74
Delete Row ................................................................................................................ 74
Move Row ................................................................................................................. 74
Change Column Width .............................................................................................. 74
Add Symbol to Row .................................................................................................. 74
Add Detail Symbol .................................................................................................... 75
Draw Rail .................................................................................................................. 75
Add Text.................................................................................................................... 75
Updating data from plan drawings to the switchboard schematic ........................................... 75
Circuit Renumbering ............................................................................................................... 76
Creating switchboard schematic symbols ................................................................................ 77
iv Contents
MagiCAD Electrical
81
MagiCAD Electrical
Contents v
Other IFC exports (IFC Calculation export and IFC Calculation Import)............... 110
Other functions ...................................................................................................................... 112
Drawing cleaning utility .......................................................................................... 112
Importing the symbol libraries ................................................................................ 112
Changing the AutoCAD attribute value of a MagiCAD symbol ............................. 113
Explode function of MagiCAD Electrical ............................................................... 113
Checking the connections........................................................................................ 113
Functions that are not recommended ..................................................................................... 114
AutoCAD's functions .............................................................................................. 114
Attribute definitions in MagiCAD Electrical......................................................................... 114
vi Contents
MagiCAD Electrical
Project
Edit Storey Properties
User Preferences
Import luminaires from DIALux
Update Drawing Data
Create User Symbol (2D)
General symbols
Cable Markings
Check Switchboards and Power Circuits
Check Data and Update from Switchboard Schematic
Reports
IFC Export
IFC Calculation Export
IFC Calculation Import
MagiCAD Electrical
Cables
Cable Packets
Devices
Device Connection
Cables
Cable Packets
Devices
Device Connection
Build Logical Connections
Check and Report Logical Connections
MagiCAD Electrical
Sockets
Tele and data
Video/audio
Signal
Fire
Security
Sub-stations and Routers
Controllers
Probes and Buttons
Other BA Points
Other Equipment
Conduits
Cable Trays
Others
Stretch Cable Tray
Change Cable Tray Width or Height
Cable Tray Crossing
MagiCAD Electrical
Circuit Renumbering
Create Switchboard Schematic Symbol
Create Detail Symbol
Explode Switchboard Schematic Symbol
Part Properties
Part Properties of HP&V Objects
Change Properties
Change Elevation
Copy Branch
Move Branch
Break Cable/Cable Packet/Cable Route
Connection Nodes
Text
Stretch Text
Revision Mark
Revision Cloud
MagiCAD Electrical
Drawing Preferences
Hide Cable/Cable Packet/Conduit
Reset Cable/Cable Packet/Conduit Hide
Show Selected Parts Only
Show All Parts
Part Property Line
Show Cable/Cable Packet/Conduit Route
Collision Control
MagiCAD Electrical
Selecting a project
Click the Project toolbar button. The Select Project dialog opens.
MagiCAD Electrical
When the Add this drawing to the model dwg list option is selected, the drawing
will be added to the model drawing list, which makes it possible to make
connections between circuits and switchboards, and the drawing is also taken
into account in the reports. Please note that it is also possible to add the drawing
to the model drawing list afterwards.
The Available projects list shows the project that exist in the directory or in the
path towards the root directory. If there are no projects in the path, the list
window is empty.
If you select a project from the list and click the Select button, the selected
project is taken into use. This function is activated when the project is selected.
If you want to create a new project, click the New... button.
If you want to cancel this function, click Cancel.
MagiCAD Electrical
The left pane shows a list of the types of data that is defined for the project.
When you click one of them, the more detailed view of the contents appears in
the right pane.
MagiCAD Electrical
The data types are described later in this manual. After you have made your
settings, accept them by clicking the Close button.
MagiCAD Electrical
Description
Select the symbol for the switchboard. When you click the Symbol Series
button, a dialog opens, and you can select which symbol series are shown.
You can also give additional information for the switchboard with the object
variables (O1 and O2). Note that the O1 and O2 can be set also with the Change
Properties function.
In the Power fields you can give the values for calculating the dimensional
current of the switchboard. Switchboards are handled as three-phase devices.
The line voltage is given in the Voltage field.
In the Earthing checkboxes you can give the used earthing method.
Exercise:
Define a switchboard and place it in your drawing.
MagiCAD Electrical
Select the system for the luminaire. You can add or remove systems in the
project management.
It is possible to define default systems for the devices in the project
management.
For each device it is possible to set a device-specific installation method, but if
the installation method is different from the method that is defined in the project
dialog, you can clear the By product setting in the Installation section. You can
also change the value afterwards with Part Properties or Change Properties.
The active group is highlighted in the Group pane.
The Product pane shows the luminaires that are selected for the project. Click
the luminaire you want to place. The row will be highlighted. You can add,
remove, or modify luminaires in the project management. Adding and modifying
are also available here in the Select Device dialog from the right click menu.
Give the elevation for the luminaire. With the Show ref. part function you can
select the elevation according to an existing object in the drawing. MagiCAD
remembers the previous elevation as long as installing the same device from the
same device group (e.g. luminaire number one from luminaires). After changing
to another device within the same device group the elevation will be taken from
the products default settings.
With the Operation area options you can set an operation area for the device.
The shape of the operation area can be a circle, a sector, or a diamond. It is also
possible to set the operation area with the Part Properties or Change Properties
functions. You can also set the operation area visible/invisible in the Viewport
Preferences dialog.
When the Use separated insertion point for 3D model option is selected, you can
place the 2D symbol and 3D object to separate locations (which is necessary e.g.
when the switch is above the socket). It is also possible to rotate the 3D object to
a different orientation related to the 2D symbol. With the Move Device Symbol
function it is possible to change afterwards the distance between the 2D symbol
and the 3D model.
With the Save to Toolbar button you can add the selected luminaire to the
"favorites" toolbar (a toolbar for devices you most frequently use). The toolbar is
drawing-specific, and up to 20 devices can be defined in it. Besides the product
information, the system, user code, operation area and elevation are saved in the
toolbar.
MagiCAD Electrical
When you have made the settings, click on the location where you want to place
the device.
MagiCAD Electrical
Place and connect the devices as in the picture, either by placing them one by
one and connecting them to each other, or by using the Array option.
Tip: You can define an integrated text for the devices in the project management.
If you have defined an integrated text, it is placed automatically with the device.
MagiCAD Electrical
Cable options
General:
Linetype:
You can set a linetype for the cable. You must define the linetypes in the Project
Management dialog. Also note that if you want the linetype to follow Status
definitions you need to select the option ByProject.
Cable number:
You can set a Cable number for the cable you are drawing in the Number for
next cable field. With the next free button you can make MagiCAD find the next
free cable number from all model drawings. Cable number is editable also in the
circuit dialog after installing a circuit and in Part Properties. MagiCAD
recognizes the highest number of digits in cable numbers and uses the same
number when the next free button is used.
Note: You can easily create cable lists with reports by using the cable number
variable.
Note: To make your cable numbers similar give the desired amount of digits
already for the first cable number.
Note: MagiCAD will not give a warning if you input a duplicate number. You
should use the next free button always when inserting a new number.
MagiCAD Electrical
XY-routing:
Select the routing for the cable.
Presentation:
Curved
Corners:
Rounded Rounded corner type. Give the radius of the bend in the
Radius field.
Bevelled Bevelled corner type. Give the distance between the end
of the bevelling and the theoretical corner point in the Distance
field.
Elevation:
The following settings affect the elevation. In this example, a switch is
connected to a luminaire.
Device basepoint:
Defines the point of the device where the cable is connected to.
Connection box:
Select here which kind of connection box to use as default. If the connection box
type is not defined, or if the Select box always option is chosen, the box selection
dialog opens every time when you start drawing from the middle of a cable (ie. a
branch). When you click the Select button, you can select the symbol for the
connection box.
MagiCAD Electrical
You can also select the elevation with Show Reference Part according to a
MagiCAD Heating&Piping and Ventilation objects and AutoCAD objects (these
objects can also exist in a reference drawing). In this case, select the Other object
option from the popup menu and other options if necessary.
If you start drawing the cable from a device or from another cable, the system
and elevation are derived from that device or cable.
Cables
You can start drawing the cable from an empty spot (in this case you must define
the elevation for the cable) or by connecting to a device or another cable.
When you have started the drawing function, you can open the pop-up menu by
clicking the right mouse button. The following options can be selected from the
pop-up menu:
Options opens the Cable Options dialog. Please note that cables
are handled as whole cables when they are drawn. If linetype,
installation code, xy-routing, presentation or corners are changed
during cable drawing, MagiCAD will split the cable into several
entities; however, they will be linked together as a whole cable.
Cables have four significant properties: system, material, cable
number and status. If one or more of these is changed during cable
drawing, the cable will be cut and a junction box is forced to be
installed. If a junction box that has two cables connected to it is
removed, the cables are connected as a whole cable if the
significant properties are the same for both cables. Otherwise they
are left as separate cables. The link between two pieces of the same
cable is also lost if the two connected ends are separated too far
from each other (100 times world scale).
connection Node arrow symbol to the end of the cable (the same
option also applies to cable packet and cable route drawing
functions). When you select this option, the Create Connection
Node dialog opens and you can select the suitable arrow symbol. In
the Project Management dialog you can select default symbols for
MagiCAD Electrical
Circuits
There are two ways to add a circuit. Either you can select the circUit option, or
you can connect the cable to an existing cable packet.
General:
Circuit number If you prefer, you can leave this field blank,
define the circuit numbers in the switchboard schematic, and
update the circuit numbers from the switchboard schematic to the
groups. A circuit number can hold 10 characters.
MagiCAD Electrical
Cable:
Shows the cable type. If the cable material is selected for the cable that this
circuit connects to, the material is derived to this field automatically. Cable
number cannot be given when installing the circuit. If a cable number is given
already for the cable when installing, the circuit it is visible in the field.
Phases:
Select the phases that are used by the circuit. You can also select the neutral
conductor and earthing wire. Currently, these values have meaning if the
network is transferred to Febdok application for calculations.
Protection:
Switchboard:
Select the switchboard the circuit connects to. When you click the Select button,
a dialog opens and you can select the switchboard.
You can attach the circuit either to a switchboard in the current drawing or to a
switchboard that is in another drawing (Select model drawing). With the
Deselect button you can detach the circuit connection to the switchboard.
Note: If there are switchboard areas defined in the drawing, and the circuit is
inside a switchboard area, it is not required to attach the circuit to the
switchboard; it belongs automatically to the switchboard of that area. Also note
that currently circuits with this area connection are not exported when using
IFC Calculation Export.
Cable packet:
You can connected a circuit to the desired cable packet (see chapter Cable
Packet for more information). Click the Connect button and click the packet to
which you want to connect with the cable. The length is calculated according to
the most direct route from the circuit symbol to the selected packet.
Schematic symbol:
Select the switchboard schematic symbol. Click the Select Symbol to open the
dialog.
Symbol:
Select the circuit symbol type.
MagiCAD Electrical
Cable packets
It is possible to get the cable lengths also from the circuit to the switchboard.
Naturally the actual cable lengths can be included in the BOM, and the future
calculation applications can utilize the cable lengths.
The number and type of the cables can be checked from the cable packet with
the Part Properties function. In addition, the cable types, systems, etc, can be
presented in the reference text. Part Properties displays all cables that are
running inside the cable packet, and the reference text displays exactly the cables
that are running at the location where the reference text is placed.
The actual cable lengths can be utilized also in calculation software such as
Febdok via IFC Calculation Export.
To get the cable lengths from the circuits to the switchboard, the route has to be
defined with a cable packet. It is then possible to connect circuits to the cable
packet. There are two ways to connect circuits:
1.
When the cable drawing function is active, show the edge of the cable
packet (see the figure below, A B). The direction of the cables inside the
packet depends on into which direction the circuit is bevelled when
connecting the first circuit to the packet. Please note that the direction means
the direction to the supplying switchboard which the packet leads to (in the
following picture it is to the right). After this the Circuit Information dialog
opens. The dialog is similar to the previously shown dialog, except it does
not contain the Symbol selection or the Cable packet selection.
2.
The connection can also be made with the help of a circuit symbol. In this
case, select Connect in the circuit dialog, and click the cable packet to which
you want to connect the cable:
When the first circuit is connected to the cable packet, you must first show
the direction for the cables after this, the program can detect it
automatically. As mentioned before in part one the direction means the
direction to the supplying switchboard. The cable length from the circuit to
the shown cable packet is calculated according to the nearest point.
MagiCAD Electrical
With the Show Cable/Cable Packet/Cable Route function you can check
afterwards to which cable packet (and location) the circuit is connected. The
program draws a line from the circuit to the packet. The line is drawn on the
MAGI_GARBAGE layer, and it can thus be removed with the Clear
Garbage Layer function.
MagiCAD Electrical
Cable trays
Cable tray options
First, click the Draw Cable Tray toolbar button. The Cable Tray Options dialog
opens when you use this command for the first time. If you want to open the
dialog later to set the cable tray options, start the drawing function, click the
right mouse button, and select Options from the pop-up menu.
Tray system:
Select the system for the cable tray.
It is possible to define default systems for the devices in the Project
Management.
Status:
Select the status for the cable tray if needed. You can add/remove/define cable
trays in the Project Management (Status definitions).
Product:
This pane shows the cable tray types that are defined for the project. Select the
type by clicking it. You can add/remove/define cable trays in the Project
Management (Trays and conduits).
Alignment:
Select the line for "guiding" the cable tray: center, left edge, or right edge.
If the Cable tray is swapped option is selected, the tray has been rotated
sideways (to be installed on a wall).
Linetype:
Select the linetype for the cable tray.
Dimensions:
Give the dimensions for the cable tray (width, height).
MagiCAD Electrical
Fitting types:
You can define the shapes for the bends, reductions, and branches
In the Inner bend radius field you can define the radius for the inner bend for
certain bend types. If you prefer to draw also the 2D filling symbol to the bends,
select the Hatch bend in 2D option.
Accept your choices and click OK.
Note: When drawing bends under ten degrees and over two degrees the reduction
none is forced in these situations and the trays are cut to straight pieces with
slightly slanted installation. With bends less than or equal of 2 degrees
MagiCAD interprets it so that the user has wanted to make a direct tray and
draws it so.
In this dialog you can give the elevation for the cable tray:
Alternatively, you can define the elevation with the Top of, Center of, and
Bottom of settings. Select one of these options, and show the object whose
elevation you want to draw the cable tray at.
Top of... the elevation of the upper surface will be taken as the
bottom elevation for the new tray
You can also select the elevation with these options according to a MagiCAD
Heating&Piping and Ventilation objects and AutoCAD objects (these objects
MagiCAD Electrical
can also exist in a reference drawing). In this case, select the Other object option
from the popup menu and other options if necessary.
Accept your choices with OK and start drawing. You can shorten the cable tray
by drawing backwards or selecting the Back option from the pop-up menu.
Editing functions
The following functions can be used for editing the cable tray:
Stretch Cable Tray
If you click in the middle of the cable tray, you can move the cable
tray segment. If you select an unconnected end of the cable tray (by
showing the end line of the cable tray or an invisible end of the
tray), you can stretch the cable tray.
If you select a bend or a branch, the shape of the piece changes and
the cable trays connected to it move or change their shape in case it
is possible with the bend/branch type in question.
If you want to change the elevation of the cable tray, select first the
Z option from the pop-up menu (which opens when you click the
right mouse button). Next, click the cable tray whose elevation you
want to change, and give the new elevation in the Elevation dialog.
The Cable Tray Dimensions dialog opens, and you can give the
new width and/or height for the cable tray (max. 2000 mm)
MagiCAD Electrical
Click two points at the cable tray to set the location for the
underpass/overpass. The part between the points is moved. Next
give the elevation for the part that is moved.
You can break the cable route with this function. Click two points
at the cable tray. The part between the points is removed.
Exercise:
Connect the luminaires, which you drew earlier, to the switch (A), and add a
circuit (B), which connects to the switchboard (C) to the end of the cable. Draw
also the cable tray (D).
MagiCAD Electrical
2.
3.
4.
5.
Select the location for the project file. When you click the button
beside the Location field, the Select Directory dialog opens.
6.
Select the directory where the template projects are saved (an
existing template project is used as a basis for your new project).
The Templates subdirectory contains template files.
7.
Select the Add this drawing to the model dwg list option if you
want to include the drawing in the model drawing list.
8.
9.
You can check and modify the project information in the dialog.
10. Close the dialog (click Close) and start working with the new
project.
MagiCAD Electrical
Other instructions
Usually the project files are saved into the same directory as the DWG files. If
you save the DWG files into several directories, and you want to attach them to
the same project, the project file must be saved on an upper level of the directory
tree towards the root for example:
x:\e-projects\projectdata.mep project file
The drawings can be saved e.g. as follows:
x:\e-projects\project12345\electric\*.dwg
x:\e-projects\project12345\tele and data\*.dwg
x:\e-projects\project12345\switchboard schematic\*.dwg
The project file can be also saved on the same directory level as the work
drawing directories, in the MEP subdirectory.
If you want to change the project file, or detach a drawing from a project, use the
Project function, and click Disconnect Project in the dialog. Attach the drawing
to the new project as described earlier (if necessary).
When you later open the drawing (DWG file) attached to a project, MagiCAD
Electrical searches and opens the project file. MagiCAD Electrical first searches
the file from the drawings directory, and if necessary, from the upper level of
the directory tree. The project name must not be changed if it is attached to a
drawing.
Once you have started drawing, do not change the project file, as the object data
(e.g. product information) may lose compatibility with the project information.
MagiCAD Electrical
Project information
General
All project information, products (data+symbols), layer definitions, etc, are
saved in the project file. Template projects contain different kinds of initial
values for different kinds of projects.
MagiCAD Electrical has a separate utility for managing templates and project
files (MCEPM, that is, MagiCAD-E Project Manager). You can use this utility to
create new projects, open existing projects, edit projects, and save them with
different names.
The project file is often shared by several users. The program checks if the
project is in use on another workstation, and shows a message if necessary.
Through this dialog you can examine and modify the contents of the project, e.g.
device properties, and layer definitions.
MagiCAD Electrical
The left pane of the project management dialog shows the labels of the
information/editing fields. If you click one of them, the right dialog pane shows
more detailed information of the contents. You can also modify the data by
selecting the corresponding row of the product information.
The first, device-specific, fields of the list (starting from the top) are mainly
same as in the corresponding dialogs that are invoked with their specific toolbar
buttons.
Right-clicking the mouse is an essential task when you edit the data.
When you right-click on a product row in the right pane of the project
management dialog, a pop-up menu opens containing the following options:
New
New/copy of selected
Delete
Properties
With the Properties function you can modify the properties of the selected item.
Project settings
All settings that affect the entire project are set here.
Default scale factor:
You can set the factor active by disconnecting the drawing from the
project and reconnecting it back to the same project. Then all new
drawings that will be added to the project will get this default value
into the Symbol scale factor for new objects field of the Drawing
Preferences dialog.
ID Range:
Here you can define the ID range for the project. It is necessary to
define this range when the same project is modified in several
locations and a local area network is not available. See chapter
Combining the projects for more information.
Market area:
Here you can select the market area whose products are displayed
when a product is selected from a manufacturers database.
When this option is selected, backups of the project files are saved
to the drawings when the drawing is saved.
Here you can choose whether the viewport preferences are saved to
the project or the drawing.
MagiCAD Electrical
Character set:
Note: Changing to Unicode will convert all data in the project file into
the Unicode format. If you change the character set back to National
some foreign characters may be lost.
Default Power Distribution Type:
Here you can choose what is the general power distribution type
used in the project. The options are: TN-S, TN-C-S, TN-C, IT, TT
and DC. This is used in the IFC Calculation Export for every
circuit.
Systems
You can use the System function with the electrical, data, and tele devices and
the cable trays. This function opens the System Description dialog with the
following fields:
ID identifier (read-only)
System code
Description
MagiCAD Electrical
Layer linetype
Layer color
Default cable the default cable used for the system can be
selected here (only for electric and tele&data)
Cables
The Cable Data dialog opens with the following information:
General information
ID (read-only field)
Description
Manufacturer
Product code
MagiCAD Electrical
Devices
Electric devices
The Product Data dialog opens with the following information:
General information
ID (read-only field)
User code
Description
Manufacturer
Product code
1~, 2~ and 3~ it is possible to choose between 1-phase, 2phase and 3-phase device.
MagiCAD Electrical
Drawing properties
Default elevation
Note: Do not use this option with products that cannot be installed
upside down, or at least with products that cannot be presented
upside down in 3D view. If separate insertion points for 2D and 3D
symbols are used for a device, both symbols are rotated when using
mirror.
2D Symbol When you click the Select button, the Select Symbol
dialog opens, and you can select the suitable symbol.
MagiCAD Electrical
IP class
EXE class
The settings are otherwise similar to electric devices, but with tele/data/BA
devices it is also possible to make the following settings:
Connections
Power supply
MagiCAD Electrical
Has power supply Here you can define whether the device
requires power. If this option is selected, give the voltage and
the power as watts. Also, when this option is selected, it is
possible to connect to this device with an electric cable without
the program giving warnings.
First select the manufacturer on the left pane of the dialog, and click the plus
sign to see the list of the products/sizes. With the Properties button you can
examine the properties of the selected product.
In the preview window you can look and rotate the rendered product image. To
see the dimensions of the product, select the Dimensions option.
With the Local databases and Internet databases options you can choose where
to search the products from. You can redefine the search path for the local
databases with the Change product database path function.
With the Search Criterion selections you can search the product with the product
code and/or the description.
Read the selected product to the project with the Select product button.
To close the product selection dialog without selecting any product, click the
Cancel button.
MagiCAD Electrical
General information
ID (read-only field)
Description
Manufacturer
Product code
Default System here you can set the default system for the cable
routes
Product variables
Symbol the hatch pattern of the cable tray. With the Select button
you can select the symbol, which you can deselect with the No
Symbol button. You can define the spacing for the hatch in the Xstep (wcs) field.
MagiCAD Electrical
Drawing properties
Layer code the value that replaces the {PV} value in the
layer name
Text styles
With this function you can define the text styles for the project. Once you rightclick the mouse, you can select the following options:
New from current dwg pick a text style from the current
drawing
New from STY file load a text style from a STY file
Write STY file save the text styles as a STY file (you can then
load them to another project)
Linetypes
With this function you can define the linetypes for the project. The continuous
linetype is selected as default. Once you right-click the mouse, you can select the
following options:
Texts
The Text Format dialog contains, for example, the text style and height
definitions.
MagiCAD Electrical
Select the text variable(s) with the arrow buttons. With the help of the New line
variable you can include several lines in your text. With the Add constant
function you can add a constant text.
With the Reference Line options you can choose the desired reference line. In the
Symbol scale field you can set the scale factor for the reference line symbol
(target line, arrow, filled circle). The scale factor can be within 0.2 4.
With the Border options you can select the desired border style. The Split circle
border type can be used only with those texts that have two lines. With the Break
cable border type you can place a text on a cable or a cable packet so that it is
opaque (i.e. cable is "broken" behind the text).
You can also lock the border size if necessary. According to the border type you
can define the symbol height/width (L) or diameter (D) in the Fixed size field.
In Column separator option you can select a separator that is used between every
variable within the same row. Available selections are: none, use space and use
character. With use character you can define the used separator.
Layer definitions
Unlike the products in the project, layer definitions cannot be added or removed.
However, the structures of the layer names, colors, and line weights can be
modified. Changing the linetype is possible in some layers. The modifying
possibilities depend on the type (usage) of the layer.
You can include the following variables in the layer names. The values of these
variables are defined according to the data of the cable, device, or revision mark.
SV (system variable)
MagiCAD Electrical
IV (installation variable)
RV (revision variable)
Layer definitions
2D presentation
Line type linetype of the object, also the BySystem and ByLayer
selections are available. If ByLayer is selected, the linetype is
defined according to the settings of the Layer definitions.
Line weight line weight of the object (if the drawings are
intended to be printed according to the line weights). Also the
BySystem and ByLayer selections are available. If ByLayer is
selected, the line weight is defined according to the settings of the
Layer definitions.
3D presentation
MagiCAD Electrical
Line weight line weight of the object (if the drawings are
intended to be printed according to the line weights). Also the
BySystem and ByLayer selections are available. If ByLayer is
selected, the line weight is defined according to the settings of the
Layer definitions.
You can select the linetype and color for the system. In the layer definition you
can define e.g. the linetype for the cable By system or as constant ( = the cables
in all systems have the same linetype).
Note: When you draw objects with the linetype option of ByProject the linetype
will follow status definitions that are defined also in Project Management.
Report definitions
The Description window shows the report models defined for the project (ie. the
models that are available to the Reports function). The new, user-defined, report
models are also included in the list.
The fields and values of the Report Definition dialog:
MagiCAD Electrical
MagiCAD Electrical
Circuit name
Default descriptions
Protection
Report data the ordinal number for the circuit (the ordinal
numbers define the order how the symbols appear in the
schematic), and the checkbox indicating whether similar groups are
summed up in the schematic (if the switchboard schematic uses
summing for the number of similar circuits)
MagiCAD Electrical
different programs (for example, Tekla Structures). For more information see the
common features.
Variable sets
Variable types:
Installation codes
IP classes casing
Running index
MagiCAD Electrical
Combining projects
General
This feature is used only when there is, for some reason, a need to work on the
same project in several locations (not sharing the same network) simultaneously.
When the project is started, it is recommended to select the specific ID range for
each location where the project is modified. This should be done because the
same IDs cannot be used in different locations when symbols are added to the
project. In MagiCAD version 2006.11, however, it is possible to merge the
products that are within the same ID range.
NB: It is not recommended to modify the devices that are included in the
template project. Neither should the project data of the other project be modified.
Define the ID range in this dialog. The range is based on the Start ID ( * 1000)
value. For example, if the start ID is 0, the range is 0..999; if the start ID is 1, the
range is 1000..1999, and so on.
If the ID range is e.g. 1000..1999, the possible ID numbers for the new symbols
are given within this ID range.
Copy or move the project files (.mep) of the sub-projects to the directory
where the main project file (.mep) is located.
MagiCAD Electrical
2.
Copy or move the drawings of the sub-projects to the directory of the main
project drawings, or create a new directory for the drawings of the subprojects.
3.
The dialog contains all information of the sub-project that is different from
the main project.
For the products that do not exist in the main project (i.e. the ID number is
not in use), the program selects Add as the operation. In this case, the
products are added to the main project.
For the products with a dash ( - ) in the Operation column, you need to
select the operation. Click the right mouse button on the row to select the
operation:
* Do not merge the product is not merged to the main project.
* Merge (add using original ID) the product is merged to the main
project, but the values for the product will be taken from the main project.
* Create new the program creates a new product with a new ID to the
main project.
* Map/Overwrite with this operation you can select the product of the
main project whose values you will use for the selected product. If an
exactly similar product is found from the main project, word Identical is
displayed in the dialog.
Once you have made the selections, click Ok Merge to merge the data.
After the merge it is recommended to open the Project dialog in the subprojects; the program is then able to make the connection between the
drawing and the project.
MagiCAD Electrical
Project
Select the project from which you want to read the data.
Groups
Select the groups you want to include: electric/tele/data/cable route systems,
cables, cable trays, and devices.
Once you have selected the project and groups, click the Compare Data button
to check if there is information that is changed. If there is, the Project Data to
Merge dialog opens.
The dialog contains all information of the sub-project that is different from the
main project.
For the products that do not exist in the main project (i.e. the ID number is not in
use), the program selects Add as the operation. In this case, the products are
added to the main project.
For the products with a dash ( - ) in the Operation column, you need to select the
operation. Click the right mouse button on the row to select the operation:
* Do not merge the product is not merged to the main project.
MagiCAD Electrical
* Merge (add using original ID) the product is merged to the main project, but
the values for the product will be taken from the main project.
* Create new the program creates a new product with a new ID to the main
project.
* Map/Overwrite with this operation you can select the product of the main
project whose values you will use for the selected product. If an exactly similar
product is found from the main project, word Identical is displayed in the dialog.
Once you have made the selections, click Ok Merge to merge the data. After
the merge it is recommended to open the Project dialog in the sub-projects; the
program is then able to make the connection between the drawing and the
project.
You can select several rows if you hold down the Shift or Ctrl key. However, to
prevent unwanted overwriting it is not possible to overwrite the products of the
active project.
When you click Ok, a new dialog opens and displays all products that would be
purged.
MagiCAD Electrical
If you want to leave a product to the project, clear the checkbox of the product in
the list.
Note: You can select several rows with Shift or Ctrl key down. Next, when you
click the right mouse button on the Purge column, you can choose between
Select for Purge and Unselect from Purge.
MagiCAD Electrical
Choose the suitable text style from the list. The text styles are defined in the
project management.
MagiCAD Electrical
Select in the 2D Scale options the objects you want the scale factor affect.
This factor has an effect on devices (luminaires, sockets, etc) if the Use general
2D scale factor of the drawing option is selected in the project management.
If the Show section mark boundaries option is selected, all boundaries of the
section area are showed, otherwise only the arrows appear in the drawing.
MagiCAD Electrical
Options (o)
Direction (d) with the devices whose direction you can change
Pan
Zoom
installation method
elevation
user code
MagiCAD Electrical
The devices are placed evenly. If SNAP is on, the devices are placed in the snap
points, and if there are devices on top of each other, the excess devices are left
off. With the Cable Options button you can modify the properties of the
connecting cable (for further information, see "Cables").
MagiCAD Electrical
"Favorites" toolbar
The most used devices can be collected in a separate toolbar. In the device
selection dialog, click Save to Toolbar.
It is possible to include 20 devices in the Favorites toolbar. You can remove the
device from the toolbar by right-clicking the button and selecting Delete button.
The buttons are sorted automatically in the toolbar according to their systems. If
you want to add a device that is already in the system and has also the same
system, the button blinks in the toolbar.
In addition to the product data, the system, user code, and elevation are saved in
the toolbar. This information is shown in a "tooltip" when the cursor is located
on the button. If you want to change these settings before you place the device
on the drawing, select Options at the command prompt.
General symbols
Select the General Symbols from the editing menu
Select the symbol and define the elevation. It is possible to define also the length
and height for the symbols that are scaled according to their dimensions. You
can change the dimension afterwards with the Part Properties function.
With the Options command line option you can change the symbol, and with the
Direction option you can rotate the symbol before placing it in the drawing.
You can also create general symbols in the same way you create other symbols
(the Create User Symbol function). Select "General symbol" as the group. For
further information see chapter "Creating user-defined symbols".
MagiCAD Electrical
System
Installation method
Status
Linetype 1D linetype
Cable number You can set a cable number for the cable you are
drawing in the Number for next cable field. With the next free
button you can make MagiCAD find the next free cable number
from all model drawings. Cable number is editable also in the
circuit dialog after installing a circuit and in Part Properties.
MagiCAD recognizes the highest amount of digits in cable
numbers and uses the same amount when using the next free
button.
Note: You can easily create cable lists with reports by using the
cable number variable.
Note: To make your cable numbers similar give the desired number
of digits already for the first cable number.
Note: MagiCAD will not give a warning if you input a duplicate
number. You should use the next free button always when inserting
a new number.
MagiCAD Electrical
Give the start point of the cable. You can change the elevation, which appears
also in the command line, with the Elevation option. You can give the new
elevation as a numeric value or according to another part (Show reference part
button).
With the Options command line option you can change the cable drawing
settings.
In this phase of the drawing session you can also open the pop-up menu for more
drawing options (or use the corresponding hotkeys at the command prompt). The
drawing options:
Options opens the Cable Options dialog. Note that cables are
handled as whole cables when they are drawn. If linetype,
installation code, xy-routing, presentation or corners are changed
during cable drawing, MagiCAD will split the cable into several
entities but they will be linked together as a whole cable. Cables
have four significant properties: system, material, cable number
and status. If one or more of these is changed during cable drawing
the cable will be cut and a junction box is forced to be installed. If
a junction box that has two cables connected to it is removed the
cables are connected as a whole cable if the significant properties
are the same for both cables. Otherwise they are left as separate
cables. The link between two entities of the same cable is also lost
if the two connected ends are separated too far from each other
(100 times world scale).
MagiCAD Electrical
Back
Z elevation change. Give the new elevation in the dialog (you can
also select a reference object) and define the angle that is used
when the cables on different elevations are connected (the default
value is 90)
connection Node arrow symbol to the end of the cable (the same
option also applies to cable packet and cable route drawing
functios). When you select this option, the Create Connection
Node dialog opens and you can select the suitable arrow symbol. In
the project management dialog you can select default symbols for
the cables, cable packets and cable routes leading to different
directions.
Pan
Zoom
The box and connection node symbols can be placed either at the start point or
the endpoint; the circuit symbol can be placed only at the endpoint.
When the cable is completely drawn, give the endpoint (Enter).
Circuit
When you select this option, the Circuit Information dialog opens, and you can
define the following circuit properties:
MagiCAD Electrical
Circuit number If you prefer, you can leave this field blank,
define the circuit numbers in the switchboard schematic, and
update the circuit numbers from the switchboard schematic to
the groups.
MagiCAD Electrical
Phases Select the phases that are used by the circuit. You can
also select the neutral conductor and earthing wire. Currently, these
values have meaning if the network is transferred to calculation
software such as Febdok for calculations.
You can modify this information later with the Part Properties function (the
Circuit Information dialog opens). Then you can also change the cable material
and cable number.
Other information
You can cut the cable/wire with the Break Cable/Cable Packet/Cable Route
function. Click two points at the cable. The part between the points is removed.
If you start drawing from an open end of another cable,
MagiCAD will check for all conflicts that appear between the existing cable and
the new cable and open the Different Properties dialog if it finds any conflicts.
The available selections in the dialog are:
MagiCAD Electrical
Note: The properties that are not shown in the dialog are already the same or are
taken from the current settings.
Note: If linetype, installation code, xy-routing, presentation or corners are
changed MagiCAD will split the cable into several entities but they will be
linked together as a whole cable. Cables have four significant properties: system,
material (product), cable number and status. If one or more of these is changed
the cable will be cut and a junction box is forced to be installed.
Note: If a device is installed in the middle of a cable the cable will be split into
two pieces. They will still have the same properties as the original though so if
the original cable already had a cable number both of the two new cables will
have the same cable number. MagiCAD gives a message if this happens.
Note: If a device is installed in the middle of a cable and the cable already has an
IFC GUID MagiCAD will reset the IFC GUID. New ones will be created in the
next IFC export.
MagiCAD Electrical
You can break the cable packet with the Break Cable/Cable Packet/Cable Route
function. Click two points at the cable packet. The part between the points is
removed.
Note: Cable packets are handled more strictly than cables. You cannot connect a
packet to another packet unless they have completely the same properties.
MagiCAD also forces all properties to be taken from the selected object when
continuing to draw an existing cable packet.
MagiCAD Electrical
The settings are otherwise similar to electric devices, but with tele/data/BA
devices it is also possible to make the following settings:
Connections
Power supply
Has power supply Here you can define whether the device
requires power. If this option is selected, give the voltage as
Volts and the power as Watts. Also, when this option is
selected, it is possible to connect to this device with an electric
cable without the program giving warnings.
MagiCAD Electrical
Start making the connections by clicking the Build Logical Connection toolbar
button. Next, show the device that will be the host device, and select the devices
(by clicking or selecting a rectangular area) that will be supplied by the host
device. Finally, accept your choices with the right mouse button.
NOTE: Before you define the connections, you can select the following options
from the pop-up-menu, which opens when you click the right mouse button:
External dwg you can select the host device from another drawing.
Do not check
AutoCAD command line informs how many connections are allowed to be made
to the host device and how many devices are currently connected for example:
Number of connected sub-devices: 6 (10) in all model drawings.
MagiCAD Electrical
Devices which are not connected to any host device the program
displays the connections which are not connected to any host device
Host select the host device whose connections you want to check
If you click the button, you can choose the host device from any
drawing that is included in the Model drawings list. The Select Host
Device dialog opens, and you can select the host device.
If you want to select the device from the active drawing, the Select from
current drawing option must be selected.
Current drawing
All model drawings all drawings that are included in the Model
drawings list are checked.
Systems select which systems are to be checked (All tele, data and BA systems
or Selected system)
Report type select the style of the report
Draw to garbage layer a line is drawn from the host device to all
devices that are connected to it. The line is drawn on
MAGI_GARBAGE layer, and it can be removed with the Clear
Garbage Layer function.
Text report the program outputs a text report, which can be copied
e.g. to an Excel sheet through the clipboard. The report includes the
following information:
o
Route there are two types or routing for calculating the distance between the
host device and the sub-device.
Direct the distance directly from the host device to the sub-device
Orthogonal the program calculates the distance from the host device
to the sub-device with a 90 angle
If the Select from current drawing option is selected, show the device of which
you want to output the report.
Conduits
MagiCAD Electrical
Conduits
When you use this function for the first time, the Conduit Options dialog opens.
Linetype
Elevation
When you later use the conduit drawing function, you can define the new
settings with the Options from the pop-up menu and in the command line.
MagiCAD Electrical
Tray system system of the cable tray. The default system for the
cable routes can be set in the project management.
Alignment the guidance for drawing the tray. If the Cable tray
is swapped option is selected, the tray has been rotated sideways
(to be installed on a wall).
2D Linetype
Dimensions
You can start drawing the tray from an empty space or by connecting to an
existing tray (or its bend/branch). The program places a suitable branch piece
automatically, or modifies the existing bend/branch, if drawing is started from an
existing cable tray or its bend/branch. MagiCAD first checks for conflicts as it
does with cables and conduits also when you start by connecting to a cable tray.
The Different Properties dialog has the same options as mentioned before.
The Connect option is on by default when drawing is started. This way you can
click the suitable location at the cable tray to which you want to connect. Note
that if you want to connect to another tray, the Connect option must be on.
MagiCAD Electrical
If you connect in the middle of a cable tray with a new tray (when you finish the
drawing of the new tray) the current options are forced to be used.
If you want to start drawing from an empty place, click the right mouse button
and select noConnect from the pop-up menu. Next, click the location from which
you want to start drawing the Elevation dialog opens.
In the Elevation dialog you can set the elevation for drawing the cable tray. If
you prefer, you can set the elevation according to a reference object.
When you draw cable tray to one direction and then backwards (i.e. on top of the
recently drawn cable tray section), the cable tray section is not drawn "twice"
instead, the cable tray ends to the point where you end "reversing". You can also
use the Back command from the pop-up menu.
MagiCAD Electrical
MagiCAD Electrical
Chapter 7. Switchboard
schematic functions
General
You can create a switchboard schematic from one or several plan drawings. If
your plan drawing consists of circuits, you can create a switchboard schematic
automatically. All group information can be transferred to the switchboard
schematic; description, fuse type, cable type, schematic symbol, circuit number,
etc.
After you have created the switchboard schematic, you can change the circuit
information, and if necessary, update it to your plan drawings. Likewise, if you
change circuit information in your plan drawings, you can update it to the
switchboard schematic.
MagiCAD Electrical controls the information that it transferred between
drawings. For example, if several circuits with the same circuit number appear
when you try to update the data, MagiCAD warns about it. It is, however,
possible to update, but you are informed about the errors if they occur.
MagiCAD Electrical
Select the model for the switchboard schematic (Report Model). The models are
defined in the project management.
Select the switchboard by clicking the Select button. The Select Switchboard
dialog opens.
MagiCAD Electrical
Select the drawing where the switchboard is (note: only the drawings that are in
the model drawing list are shown in the dialog), and select the switchboard.
Close the dialog with Ok.
Select the drawing(s) you want to include in the switchboard schematic
(Drawing of the circuits). If the Show only if includes groups for this
switchboard option is selected, only the drawings with connections to the
selected switchboard are shown.
Click OK. The Report dialog opens, containing a list of the groups that are
connected to the selected switchboard.
You can copy the texts to the clipboard to be pasted to another application, e.g.
Excel.
MagiCAD Electrical
Select the model for the switchboard schematic (Report Model). The models are
defined in the project management. If Create header only option is selected, only
the header row of the switchboard schematic is placed.
MagiCAD Electrical
Select the switchboard by clicking the Select button. The Select Switchboard
dialog opens.
Select the drawing where the switchboard is (note: only the drawings that are in
the model drawing list are shown in the dialog), and select the switchboard.
Close the dialog with Ok.
In the Base point fields you can define the precise location (X, Y) for the
switchboard schematic. Alternatively, you can choose to click the location in the
drawing (in this case select the Specify on screen option).
Select the drawing(s) you want to include in the switchboard schematic
(Drawing of the Circuits). If the Show only if includes groups for this
switchboard option is selected, only the drawings with connections to the
selected switchboard are shown.
If Explode top level blocks is selected, the schematic blocks are automatically
exploded when the schematic is created.
Accept your choices with OK. The switchboard schematic can be e.g. like in the
following picture:
MagiCAD Electrical
Data:
This pane shows the data that is included in the switchboard schematic. Doubleclick a field to modify the data in it.
Referred Circuit Symbol:
Drawing This field shows the name of the drawing where the
group resides
Read values from the circuit symbol Click this button to update
the data that is defined for the circuit symbol in the plan drawing,
to the table.
Insert Row
Click the Insert Row toolbar button to add a row to the switchboard schema. The
Insert Schematic Row dialog opens.
Empty row without data columns You can add empty rows
without data columns (i.e. blank lines). Give the quantity in the No.
of similar rows to insert field.
MagiCAD Electrical
Empty row with data columns You can add empty rows
containing data columns (i.e. modifiable switchboard schematic
rows). Give the quantity in the No. of similar rows to insert field.
Select circuit type from project You can add as many rows of a
particular circuit type as you prefer. When you select this option
and click Ok, the Select Circuit Type dialog opens and you can also
select the switchboard schematic symbol if needed.
Select circuit(s) from drawing You can select circuits from the
drawings that are included in the project. When you select this
option and click Ok, the Insert Circuit dialog opens.
Select the drawings from where to search the circuits. If the Show
only if includes circuits for this switchboard option is selected, only
the drawings containing connections to the active switchboard
appear in the list.
Select the circuits to be included. If the Don't show if already in the
schematic option is selected, the circuits that are already in the
switchboard schematic are not shown (in this example, one circuit
is included in the plan drawing).
With the Select all function you can select all circuits. MagiCAD
Electrical does not select the circuits that are already in the
schematic.
MagiCAD Electrical
Note: When you add row(s), MagiCAD prompts you to select the row above
which the new row(s) are added. If you want to add the rows to the end of the
switchboard schematic, use the End option.
Delete Row
Click the Delete Row toolbar button and select the row you want to delete.
Move Row
Click the Move Row toolbar button and select the row you want to move. Next,
show the new location.
Select the right subgroup, the market area/areas (Series), and the symbol you
want to add.
When Explode top level block when install is selected, the schematic block is
automatically exploded when it is placed. The possible sub-blocks (components)
remain as blocks.
Click Ok after selecting the symbol, and then click the row where you want to
add the symbol.
MagiCAD Electrical
Select the right subgroup, the market area (Series), and the symbol you want to
add. Click Ok to accept your choices.
You can place the symbol into an empty space (in this case select the noConnect
drawing option) or on a line. You can also place a detail symbol in the line of a
switchboard schema block. In this case MagiCAD Electrical asks: Explode
selected block reference?. If you answer Yes, the block is exploded and the detail
symbol can break the line, if necessary, when it is placed. If you answer No, the
detail symbol is placed on the line without breaking it.
Draw Rail
With this function you can draw polylines (rails) in the switchboard schema. If
you click the right mouse button when you start drawing, you can set the width
of the polyline. The default value is 0, and the line is thin. If the value is 1, the
the polyline will have the same width than the piece of rail in the switchboard
schema symbols.
Add Text
With this function you can write free text to the switchboard schema. You can
select the style and size for the text. You can also emphasize the text with
reference line and borders.
You can modify an existing text with the Part Properties function. The text can
be stretched with the Stretch Text function.
MagiCAD Electrical
The Messages dialog opens containing a list of the possible changes (e.g.
different description, different cable).
Click the Update button to update the changes to the switchboard schematic.
For closer look of some situation, you can zoom the corresponding circuit. Select
the group and click the Zoom to Center button. MagiCAD searches the location,
brings it to the center of the screen and marks it with a cross. You can remove
the cross with the Clear Garbage Layer function.
Circuit Renumbering
With this function you can renumber all circuits or the circuits in a selected area.
Click the Circuit Renumbering toolbar button to start the function. The
Schematic Numbers dialog opens.
Select the type of numbering (Increment Method) and give the first circuit
number (First Number). Select with the Range options whether to renumber the
circuits in the selected area (Select first and last circuit) or All circuits.
MagiCAD Electrical
Series Select the series where you want to add the symbol (USR
= User)
Group Select the subgroup in which you want to add the symbol.
MagiCAD Electrical
Series Select the series where you want to add the symbol (USR
= User)
Group Select the subgroup in which you want to add the symbol.
MagiCAD Electrical
Select the switchboard schematic drawing and click Ok. The Messages dialog
opens. Update the data by clicking the Update button.
MagiCAD Electrical
When you select this option, you can search circuits having reference to a device
from the current drawing. The function also sums up the power of the devices
that are connected to the circuit, and outputs the total power in the report.
Devices that are not connected to a circuit (current drawing)
With this option you can select devices with no circuit reference from the current
drawing.
MagiCAD Electrical
Storey origin in dwg Here you can, if necessary, define the location of the
storey origin (bottom-left corner). You can also set the rotation angle for the
building.
MagiCAD Electrical
You can also use the Move origin button to set the location and rotation angle.
The location of the bottom-left corner of the storey (i.e. storey origin) and the
direction of the positive x-axis are set with this function. Start the function, show
the location of the corner and then show the direction of the x-axis.
In many cases the best solution is to set the corner point of the storey to the
bottom-left corner of the building. However, it can be set to another location.
Sometimes a guideline can be drawn from a fixed location of the building (e.g.
elevator shaft) and the origin is set to the end of the guideline.
The best method to set to place the corner point is to zoom the view (zoom
window) to the corner of the building and use the Snap Intersection function of
AutoCAD. Press down the Ctrl key and click the right mouse button to find the
function. Click the corner of the building and show the direction of the x-axis
(usually to the right). To make sure that the direction of the x-axis is vertical,
check that ORTHO is on (F8).
Storey origin defines an adjustment point for saving the storey information (x, y,
and z coordinates, rotation angle) to the database. This information can be
changed afterwards, for example, if it is necessary to move the storey in x,ydirection.
Building If the storey list of the building is already modeled with MagiCAD
Room, here you can attach the drawing to the building database (project).
Storey When you have selected the building database, select the
storey which the active drawing represents.
Initial procedures
Default symbols:
The project dialog has now a new option: Connection node defaults. Using this
option you can set a default symbol for the cables, cable packets and cable routes
that are leading to different directions. MagiCAD uses these default symbols, for
example, when a connection node is added to the upper end of a cable packet.
Correspondingly, MagiCAD uses the default symbol when a connection node is
read to the next storey.
Defining the location for the storey:
With the Edit Storey Properties function you can define the locations of the
storeys in relation to each other. For example, in case of a block of flats, set the
MagiCAD Electrical
Then go to storey 2, and read the connection from storey 1 with the Connect
Node function (command: MEFNC).
When the symbols have been read from the other storey, you can continue
drawing from the connection node symbol.
Tip:
If you want, for example, to draw a vertical cable tray that continues at the same
location in other storeys, you can draw first a vertical tray e.g. in one storey and
MagiCAD Electrical
add connection nodes to its upper and lower ends. Next, you can create the
connection nodes to the other storeys by using the Connect Node function.
Commands related to the connection nodes:
Connect Node
Disconnect Node
Device connections
General
With the Device Connection function you can connect several devices to a cable
at the same time, or two devices together.
When you have selected the connection type, the program prompts you to show
the two devices (zigzag connection) or to select the devices and the cable (other
connections).
MagiCAD Electrical
Width you can set the thickness for the switchboard border line
Elevation you can set a specific elevation for the switchboard border
lines. However, this setting affects only the presentation.
When you have made the settings, click Ok and start drawing the switchboard
border line. Then you can select the arrow by clicking the right mouse button
and selecting the Arrow option; the Switchboard Border Arrow dialog opens:
MagiCAD Electrical
Symbol select the symbol for the border line arrow. You can also
include the IDs of the primary and secondary switchboards, if you
prefer.
Place the switchboard border arrow by clicking Ok and selecting the orientation
of the symbol.
Switchboard area
With the Switchboard Area function you can define area(s) to which you can
select the switchboard that is supplying the power. It is possible to select the
same switchboard for several areas.
MagiCAD Electrical
For example, if you add a circuit to a switchboard area, the circuit automatically
detects the switchboard that is supplying it that is, it is not required to connect
the circuit to the switchboard.
When you click the Switchboard Area toolbar button, the following dialog
opens:
Elevation you can set a specific elevation for the switchboard area.
However, this setting affects only the presentation.
Accept your settings with Ok, and start drawing the boundaries of the
switchboard area. The area can be of any shape; however, it must be closed.
When you have drawn at least two sides, close the area by clicking the right
mouse button and selecting Close from the pop-up menu. You can change the
size of the area afterwards e.g. with AutoCADs STRETCH.
It is possible to set the switchboard ID as the reference text for the switchboard
area. The supplying switchboard can be changed afterwards with the Part
Properties function.
Combination boxes
You can construct different kinds of combination boxes in the Project
Management dialog. It is possible to select several products from the project to
comprise the combination boxes.
The bill of materials function can calculate the contents of the combination
boxes as if they were placed as individual products.
MagiCAD Electrical
Included devices list of the devices that are included in the selected
combination box. When you select a device, you can change the system
of the selected device.
When the settings are suitable, you can place the combination box to the drawing
in the same way as any other device.
MagiCAD Electrical
Select the combination box you want to extract, and click Ok. Set the block to
the desired location.
MagiCAD Electrical
Cross-sections
Section marks
With this function you can select the section area and draw the section marks.
The text of the section mark can contain up to eight characters (also small caps).
It is also possible to define the description text for the section mark.
The cross-section area is defined with three dimensions (Size of section):
In the Section mark dialog it is also possible to select the appearance of the
cross-section.
You can select between the conventional section (Section) and the detailed
section (Detail).
If you select Section, draw first the crossline and press enter (or click the right
mouse button). Next, give the direction for the cross-section.
If you select Detail, define the area by drawing crossline around it, and finally
close the area by pressing Enter (or click the right mouse button). In the Detail
MagiCAD Electrical
alternative, the section is made of the area around the boundaries, and it remains
in the 3D mode.
If the Define ref.point option is selected, you can set the installation point after
drawing the crossline. You can also set the elevation for the installation point in
the Z field.
Boundary box is drawn around the cross-section area if the Show section mark
boundary option is selected in the Drawing Preferences dialog.
The boundaries can be moved or the depth can be changed by moving the corner
grips or using the STRETCH function of AutoCAD.
The properties of the sections can be changed with the Edit Section Mark
function.
AutoCAD objects are handled as entire blocks, that is, they are not exploded
You can also choose if you want to hide the parts automatically, and if you want
to show the name of the drawing in the cross-section. Please note that for the
time being this applies only to MagiCAD HP&V objects.
Accept your choices with OK. MagiCAD Electrical browses through the objects
and makes the cross-section image. You can then place the cross-section image
to a suitable location.
MagiCAD Electrical
Collision Control
With this function it is possible to examine the possible collisions between cable
trays. It is also possible to check the collisions between other MagiCAD
Electrical objects and MagiCAD Heating&Piping and Ventilation, AutoCAD,
and AEC objects.
Select the collision types in the options dialog (you can open it with the Options
command line option). Next define the area for the collision-check. The collision
check works in the normal plan view.
Information about the collision is gathered in the Show Messages dialog. With
the dialog functions you can place the error ticks to the drawing. Remove the
ticks with the Clear Garbage Layer function.
You can define the minimum size for the pipes that are checked. If both pipes are
smaller than the minimum size, collision is ignored.
MagiCAD Heating&Piping and Ventilation objects and ADT/AEC objects
(walls, windows, etc) can be selected also from the reference drawing (Xref
and/or AEC objects in the option dialog). Collision check with ADT/AEC
objects requires that AutoCAD 2006 or Architectural Desktop is installed.
Show messages
With this function you get the list of the collisions that may occur in the collision
check.
It is possible to show error ticks at the collision locations. When you click a row
in the list and click the Mark Selected Error and Zoom button, the error tick
appears at the location where the collision occurs, and the area is zoomed. If you
click the Mark All Errors button, all collisions are showed with error ticks. You
can remove the error ticks with the Clear Garbage Layer function.
The coordinates in the Pos column are selected between Floor and UCS
coordinates. If UCS coordinates are selected, only the coordinates of the active
floor are showed.
Other options of this dialog are not applicable in this version of MagiCAD
Electrical.
Copy Branch
Click the Copy Branch toolbar button. Select the branch you want to copy. The
branch is copied, starting from the selected location.
After you have selected the branch, you can use the command line options (or
select them from the pop-up menu) to define the Elevation for the branch, or
Connect it to another object. You can also place the branch immediately by
clicking the suitable location.
MagiCAD Electrical
If you select Elevation, you can choose in a dialog whether to Drag to new
position that is, the branch can be placed anywhere in the drawing or to Use
original xy-position.
Move Branch
Click the Move Branch toolbar button. The function is similar to the copying
function.
Group Select the subgroup in which you want to add the symbol.
MagiCAD Electrical
In AutoCAD 2007 and later it is possible to open the Part Properties dialog by
double-clicking the object.
Alternatively, you can select the object(s) and click the right mouse button. A
pop-up dialog opens, and you can select the Part Properties option. If several
objects are selected, a selection dialog opens.
Changing properties
With the Change Properties function you can change the features of the objects
(e.g. you can replace luminaire A with luminaire B; you can change the cable
material; you can change the text size; you can assign a switchboard for multiple
circuits etc.)
Click the Change Properties toolbar button. The Change Property dialog opens.
MagiCAD Electrical
Property:
Object type The type of the objects you want to target the
changing function. The object types vary depending on the
system type.
Range:
Select the scope of the changing function:
Current drawing
MagiCAD Electrical
Click the Change Elevation toolbar button, select the devices whose elevation
you want to change, and click the right mouse button. The Device Elevation
dialog opens.
Elevation displays the elevation of the selected devices, and the new elevation
can be set
Note: When you select devices, you can utilize the commandline options:
[Single part/Branch/sYstem/proDuct/Elevation]
Viewport preferences
With the Viewport Preferences function it is possible to set the presentation of
the objects in the drawing to the wireframe, 2D, or 3D mode. 3D presentation
requires that a 3D object is selected for the device in the project management.
The settings defined in the Viewport Preferences dialog are specific to the
viewport. That is, it is possible to display the dimension texts in different
orientations and the objects in different presentations in each viewport (also in
the layout windows).
When you click the Viewport Preferences toolbar button, the following dialog
opens:
MagiCAD Electrical
Main viewport:
Is main viewport Here you can set the desired viewport to be the main
viewport
Follow main viewport If you want to use the settings of the main viewport
e.g. for the viewports in the layout, select this option. The viewport in
question will then follow the settings of the main viewport.
Presentation options:
In this tab you can set the presentation separately for:
Cable trays 2D or 3D
Dimension texts:
In this tab you can choose which reference texts are displayed in each viewport
and how they are displayed
MagiCAD Electrical
Show:
Choose the orientation of the drawing in which the texts are displayed in the
active viewport:
Placed in the current view only the texts that are set in the active
viewport; in addition you can choose other views besides the active
view with the and in the selected views options
Orientation:
Choose the orientation for the texts in the viewport:
By view according to the view (that is, the texts are straight also in
the isometric view
Defaults:
Load default preferences With this function you can load the default
settings to the active viewport. The default settings can be saved either
to the drawing or the project (the selection is made in Project Project
settings)
You can visualize the 3D objects in the 3D mode with AutoCAD's VIEW,
SHADE, and other suitable commands.
Text functions
There are two toolbar buttons and commands for the texts: placing/editing the
texts, and stretching/moving the texts.
The text styles are defined in the Project Management. The values are updated
to the drawing with the Update Drawing Data function.
MagiCAD Electrical
Direction (d) you can freely choose the direction of the text
Add objects (a) you can define a common text for several objects
After selecting the suitable option(s), place the text on a suitable location.
The reference text can be changed afterwards with the Change Properties
function.
MagiCAD Electrical
Report functions
With the Reports function you can create various kinds of reports (bills of
materials) about MagiCAD Electrical objects. You can, for instance, create a bill
of materials about the quantity of luminaires, cable routes (including lengths),
etc.
You can define report styles in the Report definitions (Project Management).
Click the Reports toolbar button. The Report Properties dialog opens.
MagiCAD Electrical
Selection set:
You can save different kinds of report definitions. You can preselect a BOM
report style, drawings, systems, etc, and then save the selection set. The selection
set is saved to the project that is, the saved definitions can be used in all
drawings that belong to the same project.
Report Model:
Select here the report type (e.g. bill of materials / luminaires)
Range:
With this option you can choose the scope for the report function
Select objects Select the objects you want to include in the report.
Selected room You can select a room whose objects are included in
the report (can be used if MAGIROOM application is loaded and rooms
are defined)
All rooms of the current drawing The report is made from all rooms
of the current drawing (can be used if MAGIROOM application is
loaded and rooms are defined)
Options:
You can check if there are objects "on top of each other" (ie. too close to each
MagiCAD Electrical
other) if you select the Check duplicate positions option and give the minimum
distance of the insertion points (dx, dy, dx).
If Check duplicate positions is selected and there are parts too close to each
other, a warning dialog opens, showing the coordinates of the places where this
occurs. You can select a location and click the Zoom to Center button; if the
duplicate position is in the active drawing, the location is zoomed to the middle
of the screen.
If you click the Abort Mark errors button, all duplicate positions in the active
drawings are marked.
If you select Ignore Continue, the devices are summed to the report despite of
their being duplicate. If you have selected several drawings as the scope of the
report, the program shows the occurrences of duplicate positions drawing by
drawing and finally sums all devices to the report if the function is not canceled.
You can remove the error marks from the drawing with the Clear Garbage
Layer function.
Systems:
With this option you can choose which system(s) the report includes
All systems
Selected system
DIALux interface
With the DIALux Import function you can read the luminaires directly from the
file that is created by the DIALux program. You can also utilize the spaces that
have been modeled with MagiCAD Room when you work with DIALux.
Working procedure (MagiCAD Room phase is not required):
1) MagiCAD Room
Click the DIALux Export toolbar button, and save the file (extension .STF) to a
suitable directory. Next, select the space or spaces you want to transfer to
DIALux and click the right mouse button. The DIALux Export - Rooms to
Export dialog opens containing the spaces to be transferred to DIALux. Transfer
the spaces by clicking the Ok Export button.
MagiCAD Electrical
2) DIALux
Start DIALux and open the .STF file you created. Place the luminaires in the
rooms. When you have completed working with DIALux, save the drawing as an
.STF file (File / Export / Save STF file )
3) MagiCAD Electrical
Place the luminaires defined in DIALux to the drawing with the DIALux Import
function. Click the DIALux Import toolbar button and open the .STF file that
has been saved with DIALux. The Mapping List dialog opens, containing all
luminaires that would be transferred.
System Here you can select the system for the luminaires.
Installation Select the installation method of the devices:
By ucs Use this option, if you are certain that the space in
DIALux and the space in AutoCAD have the same insertion point.
For example, this option is recommended if you have imported the
space from MagiCAD Room.
Drag position When this option is selected, you can select the
installation point for the luminaires. Use this option e.g. if you have
created the space in DIALux.
MagiCAD Electrical
button. A list will open, containing the luminaires that are included
in the project. Select the luminaire and click Ok.
When you have made the settings, place the luminaires by clicking the Ok
Import button.
User preferences
With this function you can set the paths for the symbols and product databases.
You can also change the size of the search circle with this function.
Start the User Preferences function. The following dialog opens:
Product models:
Set the path for the product databases.
2D user symbols:
Set the path for the user-defined symbol databases
2D common symbols:
Set the path for the common 2D symbol libraries (with MCS file extension), for
example, the databases that are included in the program
Blocks:
Set the path for the 3D blocks (device symbols)
Search circle:
Here you can set the size for MagiCAD cursor (search circle). If the circle is too
small, it may be difficult to point to the desired location (for example, end of the
cable).
MagiCAD Electrical
oBject the selection is not made using the front and rear edges;
instead the program prompts you to show an object (which defines
the direction) and the coverage of the selection area in relation to
the object.
With the Restore from Clip+Rotate function you can restore the original view. If
several views are in use, the restoring function must be used in the view where
the side view appears.
MagiCAD Electrical
Cable markings
MagiCAD Electrical has two different methods to use descriptive symbols
including properties of the selected cable: Intelligent function, which uses the
symbol representing cable properties; and the other function, which can be used
for placing any symbol.
Intelligent symbols
The symbols are set to the cables in the project management (Project
Management / Cables).
Click the Cable Markings toolbar button. Next, click the cable where you want
to attach the symbol. The symbol is placed to the showed location.
Revision markings
Revision mark
Click the Revision Mark toolbar button. The Revision Mark dialog opens.
MagiCAD Electrical
General:
System:
Select here the system where the revision symbol is connected (if any).
Select from reference part If you choose this option, you can
select the system by showing a part of it. In this case, the revision
mark is drawn to the layer of the system (the layer name of the
revision marks must contain the {SV} variable)
Symbol:
Select the symbol for the revision mark.
Accept the settings with Ok. Before you place the symbol, you can change its
direction or modify the settings (choose the corresponding option from the popup menu).
Revision cloud
Click the Revision Cloud toolbar button. The Revision Cloud dialog opens.
MagiCAD Electrical
General:
System:
Select here the system where the revision cloud is connected (if any).
Select from reference part If you choose this option, you can
select the system by showing a part of it. In this case, the revision
cloud is drawn to the layer of the system (the layer name of the
revision clouds must contain the {SV} variable)
You can define the arc length with the Arc length command line option (show
the start point and the endpoint).
MagiCAD Room
If MagiCAD Room is installed, reports can be made from rooms that are defined
to the project with MagiCAD Room. (Selected room / All rooms of the current
drawing selections in the Report Properties dialog.
MagiCAD Electrical
IFC Export
About IFC
IFC (Industry Foundation Classes) is an international standard for defining the
product models in the building services. It is a method for sharing and
distributing the information between different software applications.
A MagiCAD drawing can be saved in the IFC format and this way transferred
e.g. to the CAD application that is used by the architect. The geometrical and
technical information of electrical and HVAC objects are transferred with the
help of an IFC file.
IFC versions 2x2 final and 2x3 can be used in MagiCAD. The version is selected
when starting to create the IFC file.
MagiCAD Electrical
MagiCAD Room storey origin Select this option if you have defined
the storey location in MagiCAD Room.
WCS World Coordinate System. Select this option if you are not sure
about the type of the storey origin.
Export options
Here you can select which data is written to the IFC file in addition to the
geometry and general data.
Add cables Write also the cables to the IFC file but without 3D
geometry.
Add protective devices The circuits are written to the IFC file as
protective devices.
Add cost data IFC information for the cost calculation are written
from all devices (at the moment works with the Norwegian Eldata
program by using the property set Pset_ElectricalCostData)
WCS World Coordinate System. Select this option if you are unsure about
the origin.
MagiCAD Electrical
All circuits
This option exports the whole electrical power system
with every device connected behind a circuit that is
connected to a switchboard.
With this function you can import your electrical power system
back to MagiCAD from calculation software such as Febdok and
update all the cables back to your drawings. Additional information
is updated also for protective devices. This is shown in the circuit
dialogs PD Code field.
MagiCAD Electrical
Note: You have to connect everything you want to export with cables and
circuits. You can only have one main switchboard so that MagiCAD and the
calculation software know what the starting point is. This means that there has
to be only one switchboard that is not connected to any other switchboard via
cable and circuit. If MagiCAD finds several possible main switchboard
candidates it gives a message and the export is canceled.
Note: To make calculation software read everything correctly please define the
number of used phases for junction boxes and switches also. An incorrect
number might be understood wrong by calculation software. This applies to all
other devices too. Switchboards are automatically handled as three phase
devices.
Note: Circuits that are not connected to a switchboard are not exported. You can
see the circuits that fail the export in a message when running the export. Also
circuits that are not connected to a switchboard but are in the area of a
switchboard will not be exported.
Note: If you dont define phases for circuits then calculation software might
handle them wrong. In such cases some software such as Febdok may read the
phases from the previous device that is located upstream so because of the
handling of switchboards as three phase devices the circuits without phase
information will most likely be handled as three phase circuits.
General things: IFC Schema is 2x3ge. Cable types get their name from cable
description. Cable lengths are written for the cables as well as the installation
code. Cables have to have exactly the same name in both MagiCAD and in the
calculation software to understand the cable types.
Other functions
Drawing cleaning utility
With this utility you can change all colors to a desired color in the architectural
drawing, and also run AUDIT, RECOVER, and PURGE.
Open the architectural drawing, click the Drawing Cleaning Utility toolbar
button in the MC-E Edit II toolbar, select the functions you want to use and the
color, and click Ok.
MagiCAD Electrical
Warning after exploding the objects are AutoCAD objects, and they cannot be
restored to MagiCAD objects.
Resulting entity type By default, the objects are exploded as AutoCAD
blocks, but they can also be exploded as lines. Select the object types you want
to be exploded as lines.
MagiCAD Electrical
Description
SC
System code
S1,..,S4
System variables 1 4
PC
Devices
PP
Devices, cables
PD
Product description
Devices, cables
P1,..,P5
Product variables 1 5
Devices, cables
IC
Devices, cables
IP
IP class code
Devices
EX
Devices
AC
Cable code
GN
Power groups
BC
Switchboard code
B2
Secondary switchboard
code
DL
Switchboards, devices
DW
Width
Switchboards, devices
DH
Height
Switchboards, devices
O1, O2
Object variable 1 - 2
Devices, cables
NC
National code
Devices, cables
LS
Light source
Luminaires
MagiCAD Room
Contents
Chapter 1. General
10
Building - Project..................................................................................................................... 10
Storeys ..................................................................................................................................... 12
3D preview .............................................................................................................................. 13
Rooms...................................................................................................................................... 15
Summary.................................................................................................................................. 15
Other project data .................................................................................................................... 16
Layer and color settings............................................................................................. 17
19
List of functions....................................................................................................................... 19
Project...................................................................................................................................... 20
Edit Storey Properties .............................................................................................................. 20
User Preferences ...................................................................................................................... 20
Show Room Objects (Read Storey from Database)................................................................. 20
Hide (remove) Storey .............................................................................................................. 21
Part Properties (and room data) ............................................................................................... 21
2D mode / 3D mode................................................................................................................. 23
Clear Garbage Layer................................................................................................................ 23
Edit Storey ............................................................................................................................... 23
DIALux Export.................................................................................................................... 23
24
List of functions....................................................................................................................... 24
Draw wall ................................................................................................................................ 25
Install window ......................................................................................................................... 26
Install door............................................................................................................................... 27
Install column .......................................................................................................................... 27
Install beam.............................................................................................................................. 29
Define room............................................................................................................................. 30
Erase MagiCAD Room object ................................................................................................. 32
Stretch or move wall................................................................................................................ 32
Change wall height .................................................................................................................. 33
Set wall joint (break wall)........................................................................................................ 33
Move door or window ............................................................................................................. 33
MagiCAD Room
Contents iii
Part properties.......................................................................................................................... 34
Save, calculate, and update texts.............................................................................................. 34
Close edit mode ....................................................................................................................... 35
Chapter 6. Calculations
36
39
41
44
iv Contents
MagiCAD Room
MagiCAD Room
Chapter 1. General
Chapter 1. General 1
MagiCAD Room
Note that in this mode (view mode) you cannot edit the room geometry. You can
only change the input values of the room (e.g. temperatures) and calculate the
heat losses. (MagiCAD Room layers are locked.) When you want to draw and
edit objects, you must switch the program to the edit mode with the Edit Storey
function. At this stage MagiCAD Room asks whether the information of
the storey is read from the building database.
In most cases, the information is read from the database (that is, Yes is selected).
However, if the data is not yet in the database for some reason (for example, the
rooms have been copied and pasted from another storey), No is selected. In the
latter case, the program switches to the edit mode without updating the drawing
with the data in the building database.
The main principle is that all drawing and editing is performed in the edit mode
using the functions of the MagiCAD Room Edit toolbar.
All drawing and editing functions of AutoCAD (ERASE, COPY, UNDO, etc)
can also be used, but e.g. the Stretch or Move Wall function of MagiCAD Room
is made particularly for the wall objects of MagiCAD Room.
When the program is in the edit mode, the changes are made to the drawing
instead of the database, and for this reason e.g. the heat loss calculation
MagiCAD Room
performed in the Part Properties and Room data function does not work in the
same way as in the view mode. When it is intended to save the data and perform
the calculation after (or during) editing, the Save, calculate, and update texts
function shall be used. When this function has been used, the data is updated to
the building database, and the entire project (all storeys) have been calculated,
taking also the possible heat transfer between storeys into account. It is also
possible to examine the heat losses of individual rooms with the Part Properties
and Room Data function.
When the edit mode is closed, MagiCAD Room asks whether the changes will
be saved to the building database.
If you answer No, MagiCAD Room reads the information from the database and
restores the drawing unless you have used the saving function.
If you want to restore the data in the edit mode, you can use AutoCADs UNDO
function and save, or close the edit mode without saving.
Creating/selecting a project
First, create and save a new drawing or open an existing drawing you want to
include in the project. The existing drawing can be, for example, a drawing
created with MagiCAD Heating&Piping, Ventilation, or Electrical.
If you use an existing drawing that already has the storey information defined
(MagiCAD Electrical), you can view the information with the Edit Storey
Properties function. If the information has not been defined, they can be input at
this stage.
The Storey Properties dialog opens:
MagiCAD Room
Storey origin in dwg Here you can define the location of the storey origin
(bottom-left corner). You can also set the rotation angle for the building.
You can also use the Show origin button to set the location and rotation angle.
The location of the bottom-left corner of the storey (i.e. storey origin) and the
direction of the positive x-axis are set with this function. Start the function, show
the location of the corner and then show the direction of the x-axis.
In many cases the best solution is to set the corner point of the storey to the
bottom-left corner of the building. However, it can be set to another location.
Sometimes a guideline can be drawn from a fixed location of the building (e.g.
elevator shaft) and the origin is set to the end of the guideline.
The best method to set to place the corner point is to zoom the view (zoom
window) to the corner of the building and use the Snap Intersection function of
AutoCAD. Press down the Ctrl key and click the right mouse button to find the
function. Click the corner of the building and show the direction of the x-axis
(usually to the right). To make sure that the direction of the x-axis is vertical,
check that ORTHO is on (F8).
Storey origin defines an adjustment point for saving the storey information (x, y,
and z coordinates, rotation angle) to the database. This information can be
changed afterwards, for example, if it is necessary to move the storey in x,ydirection.
Building If the storey list of the building is already modeled with MagiCAD
Electrical, here you can attach the drawing to the building database (project).
Storey When you have selected the building database, select the
storey which the active drawing represents.
MagiCAD Room
If the building and the storey list does not exist yet, start defining it with the
Select... button.
The Available projects list shows the building databases that exist in the
directory or in the path towards the root directory. If there are no building
databases in the path, the list window is empty.
If you select a building database from the list and click the Select button, the
selected building database is taken into use.
If you want to create a new building databases, click the New... button.
If you want to cancel this function, click Cancel.
Storey origin in building If you intend to attach the drawing to a building
(which is the case when MagiCAD Room is used), it is not necessary to give this
information.
Give the name for the database, and select the directory where you want to save
the project (Location).
Select the template database. The templates are saved in the Template
subdirectory of the MagiCAD Room program directory.
A template database is a building database containing only the basic project
information, not any room data. You can select a database supplied with the
MagiCAD Room
program (or a database modified from it), or use any of your existing databases
as the template.
Accept your choices with OK. The Storey Properties dialog opens again.
Storey: - Select the storey, which the active drawing represents, with the Select
function.
If you want to detach the drawing from the building database, click the None
button.
With the Editfunction you can open the project dialog, in which you can
manage the information that covers the entire project (i.e. building). Here you
can manage all storeys of the building.
MagiCAD Room
The left pane shows a tree of the types of data that is defined for the project.
When you click a tree item, the more detailed view of the contents appears in the
right pane.
The data types are described later in this manual.
In the Storey pane you can add/remove/copy storeys (New storey, Delete storey,
Copy Storey).
MagiCAD Room
In most cases, the information is read from the database (that is, Yes is selected).
However, if the data is not yet in the database for some reason, No is selected. In
the latter case, the program switches to the edit mode without updating the
drawing with the data in the building database.
When the edit mode is on, the MagiCAD Room Edit toolbar appears.
Draw the walls and place the doors and windows. You can also define new
structures in the project.
Define and place the room data for each room with the Define Room function.
The room data definition appears as a text label in the drawing
When you have done your modifications, click the Close Edit Mode button.If the
objects have been changed, you can at this stage decide whether they will be
saved to the building database. You can save the objects in the database any time
with the Save function.
The contents of the text label can be defined with the same function that is used
for reading the information from the database, that is, Read Storey from the
Database.
MagiCAD Room
MagiCAD Room
Building - Project
This view applies to the entire building.
Double-click the right pane to edit the general project information. The Project
Description dialog opens.
MagiCAD Room
Roof slab this structure is used as the default roof slab. Background
temperature, usually the outside temperature, is used in the heat loss
calculations. For each room it is possible to define an exceptional roof
slab with different background temperature.
Floor slab this structure is used as the default floor slab. Background
temperature, e.g. the temperature of the ground, is used in the heat loss
calculations. For each room it is possible to define an exceptional floor
slab with different background temperature.
MagiCAD Room
Storeys
It is possible to define storeys to the project as many as possible. The rooms
modeled in the same AutoCAD drawing form an entity that is saved in the
building database as a storey.
The locations of the storeys in relation to each other are defined in the project
data. The storeys can be adjacent or on top of each other. When the storeys are
on top of each other, MagiCAD Room assumes that the structure between the
storeys is an intermediate floor, and calculates the heat transfer between the
storeys.
Storey-related functions:
Delete storey deletes the selected storey and all its information
Copy storey copies the selected storey and asks the name and location
of the new storey.
When you select the storey from the list and double-click the right pane, the
following dialog opens:
In this dialog you can define the Name, Position (x,y,z) and the possible
Rotation angle of the storey for the project database.
It is possible to define a default height for the room (Default height [mm]). This
default height is used with all new rooms that are defined in the building.
MagiCAD Room
If some room number does not match the format, it is asked separately.
Renumbering can also be done separately. Select the rooms to edit, click the
right mouse button, and select menu option Change value in the column on the
room number column.
3D preview
With the 3D preview function of the project dialog you can examine all storeys
in the same view and, for example, check that the storeys are located correctly in
relation to each other (applies only to the storeys that are on top of each other).
You can rotate the image of the building (press left mouse button down), and
examine each part of it by selecting the item from the project tree.
MagiCAD Room
MagiCAD Room
Rooms
This view shows a list of rooms that have been defined to the storey. The
location of the active room in the storey is showed with red lines.
Double-click the room to review/edit its data. NOTE ! The possible problems in
the area calculation of complicated spaces are displayed in the Note-column.
With the Heat loss analysis function you can calculate the heat losses of the
room.
Please note that MagiCAD Room calculates the entire project (all storeys and all
rooms), which means that heat transfer with the rooms in upper/lower storeys
may appear in the list of heat losses.
Summary
This view shows the summary of the calculations that have been performed in
the project.
MagiCAD Room
MagiCAD Room
To add, remove, or modify a wall definition, click the right mouse button. The
Add/Delete/Properties popup menu opens. To modify a wall definition you can
either double-click the wall on the right pane, or select Properties from the
popup menu. If you add or modify a wall, the Wall dialog opens.
Windows view shows a list of the window elements that have been defined for
the project. If the dimensions are not given, they will be defined during
installation. The installation height is the default elevation for the lower edge of
the window.
Doors view shows a list of the door elements that have been defined for the
project. Default installation height is the default elevation for the lower edge of
the door.
Slabs view shows a list of the roof and floor slabs that have been defined for the
project.
MagiCAD Room
Color color of the object. This color setting is the default color,
which will be created when the object is created to the drawing.
These values can be changed also from AutoCADs layer
management.
2D and 3D presentation
Colors will be updated automatically when exiting from the Project dialog. The
colors are also updated when using Show Room Objects or 2D/3D functions.
MagiCAD Room
List of functions
This toolbar is a standard AutoCAD toolbar, and it is always present when
MagiCAD Room menu is loaded and set to be visible.
Project
Edit Storey Properties
User Preferences
Show Room Objects (read storey from the database)
Hide Room Objects (hide storey)
Part Properties and Room Data
2D mode
3D mode
Clear Garbage Layer
Edit Storey
DIALux Export
Drawing Cleaning Utility
Help
MagiCAD Room
Project
This section contains functions to create/select the building database, to define
general properties and initial values for the project, storeys, structures, etc, and to
view the heat loss analysis of the rooms. These functions are described earlier in
this manual in chapter Project data.
User Preferences
This function contains setting the size of the search circle. The search circle is
active, for instance, when drawing the wall the Connect option is on.
You can set the size of the search circle between 1 and 100 pixels. Type the size
to the Circle size (pixels) field.
MagiCAD Room
If the program is in the edit mode, this function does not read the information
from the building database, thus it can be used only for defining the data that is
displayed in the drawing.
MagiCAD Room
When you want to examine or change the room data, click the text label of the
room.
In the room data you can also define the information of the roof slab and floor
slab to be different from the information defined in the project data.
Heat loss calculation is performed with the Heat loss analysis function. The list
shows the heat loss of each structure and the selected structure (wall, window, or
door) appears in different color in the wireframe presentation.
MagiCAD Room
2D mode / 3D mode
This function switches MagiCAD Room objects between 2D and 3D modes.
Edit Storey
This function activates the edit mode and invokes the MagiCAD Room Edit
toolbar. When you start this function, the following dialog opens.
In most cases, the information is read from the database (that is, Yes is selected).
However, if the data is not yet in the database for some reason (for example, the
rooms have been copied and pasted from another storey), No is selected. In the
latter case, the program switches to the edit mode without updating the drawing
with the data in the building database.
DIALux Export
The DIALux Export function transfers the selected rooms to the DIALux
program (with the help of a *.STF file). The inner boundaries of the rooms in the
storey coordinate system are written to the transfer file. The transfer file is read
by the DIALux program. DIALux project including the rooms is automatically
created in the DIALux program.
MagiCAD Room
List of functions
This toolbar is visible when the edit mode is on.
Draw Wall
Install Window
Install Door
Install Column
Install Beam
Define Room
Erase MagiCAD Room Object
Stretch or move Wall
Change wall height
Set Wall Joint (break wall)
Move Door or Window
Save, Calculate, and Update Texts
Close Edit Mode
MagiCAD Room
Draw wall
When you use the function for the first time, the Wall Options dialog opens.
Virtual not an actual wall structure; used for dividing a space into
several room areas and to connect together rooms that are inside each
other
Commandline options
The wall drawing function has the following commandline options. To select a
commandline option, type its hotkey on the commandline or click the right
mouse button and select the item from the popup menu.
Connect / noConnect (c) When Connect is on, the search circle is visible
and drawing must be started from an existing wall (by default connect is
on).
When you want to start drawing from an empty space, select noConnect.
It is also possible to create rooms without wall connections. In this case, the
connecting walls must be at a distance less than 100mm from each other.
This makes it possible to create rooms e.g. by copying walls with
AutoCADs COPY function.
MagiCAD Room
Options (o) This option opens the Wall Options dialog, in which you can
change the wall definitions.
Back (b) Returns to the previous point, when drawing the wall.
Install window
When you use the function for the first time, the Window Options dialog opens.
Maximum width height and elevation are given in the dialog, the
width is maximum that fits in the place
Maximum width and height the window is as large as fits in the place
Define width during installation height and elevation are given in the
dialog, the width is defined by showing two points on the wall
MagiCAD Room
It is also possible to select the installation method, that is, choose whether to
install one or several windows at the time.
Serial installation several similar windows are installed in a row. Give the
number of windows and the gap between the windows.
Commandline options
The drawing function has the following commandline options:
Options (o) This option opens the Window Options dialog, in which you
can change the window drawing definitions.
Install door
When you use the function for the first time, the Door Options dialog opens.
First, select the door type. The types are defined in the project data..
Next, give the dimensions and installation height (elevation) for the door. The
enabled fields (that is, what dimensions can be given) depend on which
dimensions are predefined in the project data.
Select the opening direction of the door and show the location on the wall.
Install column
When you use the function for the first time, the Column Options dialog opens.
MagiCAD Room
Select the shape and give the dimensions for the horizontal column. Length[mm]
represents the height of the column.
Accept your choices with Ok and click the location where you want to place the
column. The Elevation dialog opens.
You can give the elevations by typing them in the dialog fields. When you
change the value of one field, the values are updated according to the height of
the column.
Alternatively, you can define the elevation for the column according to another
MagiCAD Room object; in this case, select one of the Top/Center/Bottom of
options and show the reference object in the drawing. When you have showed
the object, the program returns to the Elevation dialog.
Accept the elevation with Ok. The column is placed in the drawing.
Commandline options
The drawing function has the following commandline options:
Options (o) This option opens the Column Options dialog, in which you
can change the column drawing definitions.
MagiCAD Room
Install beam
When you use the function for the first time, the Beam Options dialog opens.
Give the dimensions for the beams and accept them with Ok. Place the beam in
the drawing. The elevation for the beam is defined and the commandline options
are used in the same way as with the columns.
MagiCAD Room
Define room
The room is defined inside an area that is limited with walls. Select the Define
Room function, show the space, and give the input values.
Room
The User code (room number or similar unique value) must always be
given for the room.
Note This field can contain e.g. information related to the usage and
loads of the building to be shared with other design disciplines.
Room height [mm] used for calculating the volumes, and in IFC data
transfer.
Area and volume MagiCAD Room calculates the area and volume
according to the calculation criteria defined in the project data. The
areas and volumes that are used in heat loss calculations are always
defined according to the centerlines of the structures.
Ventilation
MagiCAD Room
Primary flow for automatic values Select the primary airflow, if you
are going to give the airflow according to area, or how many times per
hour
o
Supply
Extract
By times per hour here you can define how many times per hour the
air should be changed
Leak factor [1/h] the leakage air describes the uncontrollable air
transfer through the structures. The leakage air is calculated according
to the room volume (per hour; the value is usually 0.1 0.2).
Temperatures
Temperature set point for heating [C] the desired indoor temperature
of the room
Leak factor [1/h] the leakage air describes the uncontrollable air
transfer through the structures. The leakage air is calculated according
to the room volume (per hour; the value is usually 0.1 0.2).
Slab exceptions
The default values (type, background temperature) for roof slab, floor slab, and
intermediate floor have been defined in the project data. When needed, you can
define the exceptions for the roof and floor slabs.
Area coverage from room area [%] the percentage of the exception
area
Temperature [C] here you can set the temperature that is used when
the heat loss is calculated
Area coverage from room area [%] the percentage of the exception
area
Temperature [C] here you can set the temperature that is used when
the heat loss is calculated
When the rooms are defined, their data is in the drawing but not yet in the
database. Update the storey information to the database with the Save, Calculate
MagiCAD Room
and Update texts function if you want to calculate and examine the heat losses
during editing.
Total heat loss [W] the total heat loss of the room
Manual value if this option is selected, you can define a constant heat
loss for the room. This value overrides the calculated heat loss.
Heat loss analysis this function calculates the rooms heat losses
You can edit room data afterwards with the Part Properties function.
When the storey is in the edit mode and the Room dialog is closed with OK
after making the changes or if the storey information is otherwise modified
the Heat loss analysis function of the Room dialog is disabled until the storey
information is saved in the database.
When the room data is changed with the Part Properties function in the view
mode (that is, when edit mode is switched off), the storey is saved and
calculations are performed automatically. In the view mode it is also possible to
change the room data in the project dialog.
Heat loss calculation is described in chapter Calculations / Heat losses.
Note! Room values can also be set in the Project Management dialog. With
Shift and Ctrl buttons, several rooms can be edited at the same time.
MagiCAD Room
If you want to cancel the changes made with the stretch/move function, use
AutoCADs UNDO function.
MagiCAD Room
Part properties
When the program is in the edit mode, information of the objects can be changed
with the Part Properties / Change function. Click the wall, door, or window, and
select Change in the Properties dialog.
MagiCAD Room
You can locate the rooms by selecting a warning from the list and clicking
Zoom center. The location of the warning, marked with a tick, appears on the
center of the screen. Use the Clear Garbage Layer function to remove the ticks
from the screen.
If you want to save the storey despite the warnings, click Ignore save anyway.
If the Show errors after saving option is selected, the program places the ticks to
all rooms where this error occurs.
MagiCAD Room
Chapter 6. Calculations
Heat losses
When you click the Heat loss analysis button in the Room dialog, the Heat
Loss dialog opens.
The list shows only the structures where heat transfer occurs (that is, there is
a temperature difference over the stucture).
36 Chapter 6. Calculations
Area [m2]
U [W/m2K]
Note notification
o
Structural heat loss [W] total heat loss through the structures
Supply air heat loss [W] effect required to warm the supply air to the
indoor temperature
MagiCAD Room
Leak heat loss [W] effect required to heat the leakage air
Note: If the building contains several storeys on top of each other, the program
automatically checks whether there are rooms with different indoor temperature
above/below the active room.
Room picture
This window pane shows the shape of the active room. When you select a
structure from the Heat loss analysis pane, the structure is presented with a red
line.
Ventilation
This calculation handles the effect that is needed to heat the supply air and
transfer air to the room temperature.
The effect required to heat the supply air and transfer air is calculated with the
following formula:
vent = 1,2 * qv * (T1 T3)
qv = supply airflow or transfer airflow [l/s]
T1 = inside temperature of the room
T2 = air temperature
Transfer airflow is the remainder of supply airflow and exhaust airflow.
The above formula does not consider the heating of the air from outdoor
temperature to supply air temperature. MagiCAD Room does not calculate
the Air Handling Units.
Leakage
The effect required to heat the leakage air (additional airflow) is calculated with
the following formula:
leakage = 1,2 * (nleakage * V/3600) * (T1 T4)
nleakage = leak factor [1/h]
V = volume of the room [m3]
T1 = inside temperature of the room
T4 = outside temperature
Chapter 6. Calculations 37
MagiCAD Room
Exterior wall:
The area is calculated from the exterior walls using one of the following options:
Inner surface, Centerline, Outer surface
Interior wall:
The area is calculated from the interior walls using one of the following options:
Inner surface, Centerline, Outer surface
Structural wall:
The area is calculated from the structural walls using one of the following
options: Inner surface,Centerlin,Outer surface
If the Subtract the column area option is selected, the areas of the columns are
excluded when the areas are calculated.
Note: The heat loss calculation always uses the midpoints of the walls when
calculating the floor area.
38 Chapter 6. Calculations
MagiCAD Room
IFC Export
This function exports all storeys and structures from MagiCAD Room to an IFC
file. The structures to export consist of floor slabs, roof slabs, beams, columns,
walls, and the doors and windows that are attached to the walls. Besides the
structures, the spatial definitions (ifcSpace) and spatial data is exported to the
file. The spaces to export are defined according to the inner surfaces of the walls
that outline the space in MagiCAD Room. The height of the space is the room
height given by the user.
A floor is automatically generated to the space. Roof slabs are generated to the
spaces that are not outlined with upper storeys (typically the rooms in the top
storey).
The data that is attached to the spaces consists of name, identifier, supply and
exhaust airflows, heat loss, and room temperature in the heating situation. In
addition, the room temperature and cooling demand*) in the cooling situation are
also attached to the spaces.
*) By default, these values are zero, because MagiCAD Room does not calculate
cooling demands. However, these values can be set by the IFC Import or IFC
Space Update function, if they have been calculated with external calculation
software.
MagiCAD Room
IFC Import
This function imports the storeys and rooms (ifcSpace) and the spatial data. The
imported data consists of the same type of information that is exported with the
IFC Export function.
IFC Import function switches off the automatic calculations and generation of
the horizontal surfaces (slabs).
Structures are not imported.
MagiCAD Room
Copying rooms
For copying the rooms you can use AutoCADs COPY and MIRROR commands
or copy/paste functions. If you copy rooms to a different storey (i.e. to a different
drawing), close the edit mode after copying, select the other drawing active,
switch to the edit mode, and paste.
Note: Do not copy rooms from a project to another. The project data can be
defined in different ways in different projects, which means that the structures in
the drawing cannot get the data from the project.
MagiCAD Room
Exceptions
With the exception information it is possible to set the background temperatures
of the walls and intermediate floors to be different from the temperatures that are
defined in the project data.
When the exception information is given for a wall, it should be given only for
the walls that are against the outdoor temperature. To avoid confusion, always
draw the exterior walls using the Exterior wall type.
If you want to define an exception only to a certain part of the wall, first divide
the wall using the Set Wall Joint (break wall) function.
MagiCAD Room
Virtual wall
Virtual wall should be used when the walls of the spaces do not form a closed
space but the spaces are intended to be defined as different rooms.
With virtual walls it is also possible to define several rooms with different data
in the same space. The program does not handle the virtual walls in the
calculations.
MagiCAD Room
Heat losses
You can examine, and if necessary, modify the room data (e.g. indoor
temperature, airflows) and calculate the heat losses for individual rooms an the
entire building.
Bill of materials
When the MagiCAD HP/V/E drawing is attached to a MagiCAD Room project,
the location (room) can be listed in the bill of materials.
When MagiCAD Room is installed on the workstation, the BOM function loads
the necessary program modules automatically.
IFC Export
MagiCAD Heating&Piping, Ventilation, and Electrical contain the IFC Export
function to transfer HVAC and electrical objects to an IFC file.
Contents
Chapter 1. General
General....................................................................................................................................... 6
Creating a new database ............................................................................................................ 7
Modifying an existing database ................................................................................................. 7
MagiCAD Product Modeller functions...................................................................................... 8
10
28
Pipe components...................................................................................................................... 28
Starting modeling ...................................................................................................... 28
Modeling an ordinary valve....................................................................................... 30
Result......................................................................................................................... 31
Modeling an automatic zone valve............................................................................ 32
Heating/Cooling devices.......................................................................................................... 33
Modeling a radiator ................................................................................................... 33
Water radiator .......................................................................................................................... 36
Modeling a water radiator ......................................................................................... 36
Water devices........................................................................................................................... 38
Modeling water points............................................................................................... 38
Sprinklers................................................................................................................................. 40
Modeling a sprinkler.................................................................................................. 40
42
Contents iii
47
Electric devices........................................................................................................................ 47
Modeling a single product ......................................................................................... 47
Modeling a product family ........................................................................................ 50
Tele, data and building automation devices............................................................................. 53
iv Contents
Chapter 1. General
Chapter 1. General 5
General
Start MagiCAD Product Modeller from it shortcut in MagiCAD folder. A
blank QpdModel dialog opens.
In the left pane (1) you can browse the modeled product groups. The products
that are modeled into the selected product group are shown as a list in the right
pane (2).
You can preview and modify the products by selecting a product from the list
and clicking the right mouse button. A pop-up menu opens (available when at
least one product is modeled) with the following options:
o
You can either model products into existing databases or create a completely
new database. In MagiCAD's product database directory (usually the Products
Component
Flow Damper
Fire Damper
Silencer
Other
Outdoor
Supply
Extract
Exhaust
Fan
Cleaning cover
Component
Radiator Valve
Zone Valve
Stop Valve
Other Valve
Other Component
Heating/Cooling Device
Radiator
Other Device
Water
Water radiator
Water device
Sprinkler
Sewer
Component
Device
Electric Devices
Boxes
Sockets
Switches
Luminaires
Heaters
Equipment
Other devices
Main units
Sub-units
Sockets
Signal devices
Security devices
Other devices
Building automation
Controllers
Actuators
Other BA products
Ductwork components
In this example we model a damper with the size of 160.
NB: Other ductwork devices are modeled mainly in the same way. When you
model eg. a damper, the program selects the symbol. When you model an
OtherComponent, you can select the symbol yourself and you can also use the
UserSymbol alternative, in which case you can draw the symbol yourself.
Starting modeling
Start modeling the damper by selecting Insert Ductworks Component
Flow Damper... from the pulldown menu. The Product Model dialog opens.
1) Model Type
Select here whether to model the product by velocity (the first option) or by
airflow (the second option).
If the product is modeled by velocity, all sizes have the same pressure drop and
sound data curve. If the product is modeled by airflow, each size has its own
curves.
2) Connection Sizes
If the product is modeled by velocity, the Connection Sizes selection is active.
Select there whether to model circular or rectangular devices.
o
List of diameters All sizes of the circular ducts are added to the list
List of rectangles All sizes of the rectangular ducts are added to the list
Rectangle range Minimum and maximum sizes (height, width) and the
step between the sizes are given
3) Damper type
Select here whether to model a normal damper or a damper with constant
airflow.
In this example we model a normal damper by airflow. Accept the settings by
clicking the Ok button. The main dialog of modeling opens.
3
4
1) General
o
ID Give here a unique identifier for the product, eg. FD (Flow Damper).
ID is shown in MagiCAD's selection lists only if Code is not defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Flow Damper). If
Code is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
Storage
Select the location from where to select the Qmodel.
Current project from the active project
Local modelfolders from a local Qmodel directory
Magi.Net from a web server
Models
This window contains a list of Qmodels you can select.
Browse the desired model active, and select it by double-clicking the model or
accepting the selection with Ok.
Preview
This window contains the selected Qmodel. You can rotate the model when the
left mouse button is down. If you have a wheel mouse, you can zoom the model
by scrolling the wheel and move the model by pressing the wheel down.
If you want to see the dimensions of the model, select Lines and dimensions
4) Sizes
Model the device sizes in the Sizes pane. Start by clicking the New... button. You
can modify existing devices afterwards with the Edit... function. You can remove
sizes by selecting the sizes and clicking the Delete button.
The modeling process is described in the next section.
5) Preview
Modeling dampers
Start modeling by clicking the New... button in the Sizes pane. The modeling
dialog opens.
1
4
3
1) General
o
ID Give here a unique identifier for the product, containing eg. the
connection size (FD-160).
Product code This value appears in MagiCAD's selection lists, and it can
be used for clarifying what kind of product is in question (eg. FD-160). If
Productcode is not defined, ID is shown in MagiCAD's selection lists.
2) Operation Range
Give here the operation range:
o
3) Dp-Curves
Give one point from each pressure drop curve in this dialog. Click the New...
button. The dpCurve dialog opens.
Give the preset (adjustment) value of the pressure drop curve in the Adjustment
value field. Give a point from the pressure drop curve in the qv (l/s) and dp (Pa)
fields. For example, give the following values for your sample device:
o
You can modify existing points by selecting the point and clicking the Edit...
button. You can remove a point with the Delete button.
NB. It is enough to model only open/closed positions for a device with a damper.
4) Sound Attenuation
Give here the attenuations of the device by octave bands (the attenuations are
presented in the manufacturer's brochure/catalog). The device usually has one set
of attenuations, and these values are suitable for all curves.
Start entering the attenuations by clicking the New... button. The Sound
Attenuation dialog opens.
If there are different attenuations for each curve, give the number of the curve in
the Adjustment field. If there is only one set of attenuations for the device, leave
the Adjustment field blank. If the Adjustment value is given to one curve only, it
is ignored.
Enter the attenuations by octave bands in the dLw [dB] fields.
5) Sound Generation
Input the sound generation of the device in this dialog. Start modeling the sound
curves by clicking the New... button. The Sound Generation dialog opens.
63
125
250
500
1K
2K
4K
8K
20
18
14
11
-3
-12
-21
Adjustment
dB
qV
25
40
35
60
25
80
35
25
100
35
150
dp
60
Input the values in the Sound Generation table. In the LpA10m2 EndR=A we see
the sound pressure level of the device. When you click the Check LW-data
button, the program checks that the sound data is given correctly.
Tip: Once you have modeled the first sound information, you can use the Copy
button to copy the data. Then you can give the new adjustment value and
intersection points, and add/reduce sound of the device with the 1dB and +1
dB buttons (for instance, if you copy the 25dB curve, you can add 10 dB to it,
which means that you model the 35dB curve).
6) Dimensions
When you have given the sound data, give the dimensions for the device.
D: outer diameter
L: length
Result
When the sound data and dimensions are given for the device, you can preview
the device with the Preview button (7). In this example, the preview appears as
follows:
If you are satisfied with the result, close the preview (click the Close button) and
accept the product by clicking Ok (8). Then you have modeled one size and you
can start modeling the next one.
When you have modeled all sizes you need, stop modeling the device by
clicking Ok in the main dialog. The modeled device the appears in the right pane
of the QpdModeller main dialog. The dialog has ID, Code and Description as the
header.
Starting modeling
Start modeling by selecting Insert Ductworks Device Supply
The New air device dialog opens.
No damper (single dp curve): The device does not contain a damper (ie. it
has only one pressure drop curve)
Select No damper, and accept your selection with OK. The main dialog of device
modeling opens.
3
4
1) General
o
ID Give here a unique identifier for the product, eg. SAD (Supply Air
Device). ID is shown in MagiCAD's selection lists only if Code is not
defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Supply Air Device). If
Code is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
Storage
Select the location from where to select the Qmodel.
Current project from the active project
Local modelfolders from a local Qmodel directory
Magi.Net from a web server
Models
This window contains a list of Qmodels you can select.
Browse the desired model active, and select it by double-clicking the model or
accepting the selection with Ok.
Preview
This window contains the selected Qmodel. You can rotate the model when the
left mouse button is down. If you have a wheel mouse, you can zoom the model
by scrolling the wheel and move the model by pressing the wheel down.
If you want to see the dimensions of the model, select Lines and dimensions
4) Sizes
Model the device sizes in the Sizes pane. Start by clicking the New... button. You
can modify existing devices afterwards with the Edit... function. You can remove
sizes by selecting the sizes and clicking the Delete button.
63
125
250
500
1K
2K
4K
8K
-1
-1
-2
-2
-5
-9
63
125
250
600
1K
2K
4K
8K
15
11
dB
qv
25
30
dP
30
60
Fig. 20. Intersections of the pressure drop curve and sound points
Start modeling the sizes by clicking the New... button in the Sizes pane. The
modeling dialog for device sizes opens.
The dialog is similar to adjusting device (eg. damper), but only one pressure
drop curve is modeled. The sound points are modeled for the pressure drop
curve. In addition, it is possible to model a throw length curve for a supply air
device.
1) General
o
ID Give here the same ID as in the main dialog, but complete it eg. with
the connection size (SAD-160).
Product code This value appears in MagiCAD's selection lists, and it can
be used for clarifying what kind of product is in question (eg. SAD-160). If
Productcode is not defined, ID is shown in MagiCAD's selection lists.
2) Operation Range
Give here the operation range of the device:
o
3) Dp-Curve
Give here one point from the pressure drop curve of the device.
4) Sound Attenuation
Enter here the sound attenuations by octave bands (presented in the
manufacturer's brochure/catalog).
5) Sound Generation
Enter here the sound generation of the device. This is modeled in the same way
as with adjusting devices (eg. damper).
6) Dimensions
Enter here the dimensions of the device. Give the connection size in the
Duct[mm] field. Next, click the Edit Shape button. The dimension modeling
dialog opens.
Give the dimensions in the Values[mm] fields. You can select between the Dim
values and Dim names options whether to show the dimensions (Dim values) or
parameter names (Dim names) in the Preview window.
Tip: If the device has a rectangular connection duct, give eg. 200x100 as the size
in the Duct[mm] field.
7) L02
With this function you can model throw lengths for the device.
Result
You can preview the modeled device by clicking the Preview button. The sample
device appears in the preview as follows:
If you are satisfied with the result, accept the product by clicking Ok.
When you have modeled all sizes you need, accept your modeling by clicking
Ok in the main dialog. The device then appears in the list of modeled devices.
Fans
The fans are modeled in the same way as the other ductwork
components/devices.
In this example we model a roof fan with circular connection.
Starting modeling
Start modeling by selecting Insert Ductwork Fan
The Fan dialog opens.
General
The corresponding data as with the other ductwork components / devices is
given.
Type
Select the type of the fan. Roof (installed to the end of the duct) or Axial
(installed in the middle of the duct like duct component)
Duct connection
Select duct connection type, Circular or Rectangular
Geometric model
Select the appearance for the device. The Select Model dialog opens as with
other ductwork components / devices and the appropriate Qmodel should be
selected.
Sizes
Model the device sizes in the Sizes pane. Start by clicking the New... button. You
can modify existing devices afterwards with the Edit... function. You can remove
sizes by selecting the sizes and clicking the Delete button.
Modeling a fan
A fan is modeled as duct component / air terminal device with the following
exceptions
Dp-Curves
Give here at least three points from the pressure drop curve of the fan (maximum
speed). Both curve end points must be included. Also fan efficiency can be given
(not mandatory)
Sound Generation
Enter here the sound generation of the device. At least two points with the same
flow must be given. The points should be given so that the whole fan operating
area is covered.
Result
You can preview the modeled device by clicking the Preview button. The sample
fan appears in the preview as follows:
If you are satisfied with the result, accept the product by clicking Ok.
When you have modeled all sizes you need, accept your modeling by clicking
Ok in the main dialog. The fan then appears in the list of modeled fans.
Cleaning covers
The cleaning are modeled in the same way as the other ductwork
components/devices, but without any technical data.
In this example we model a plug type cleaning cover.
Starting modeling
Start modeling by selecting Insert Ductwork Cleaning cover
The Cleaning cover dialog opens.
1) General
The corresponding data as with the other ductwork components / devices is
given.
2) Type
Select the type of the cleaning cover. Plug (installed to the end of the duct),
Component (installed in the middle of the duct like duct component), Duct side
(installed on the duct side) or Oval duct side (oval, installed on the duct side)
3) Duct connection
Select duct type, Circular or Rectangular
4) Geometric model
Select the appearance for the device. The Select Model dialog opens as with
other ductwork components / devices and the appropriate Qmodel should be
selected.
5) Sizes
Model the device sizes in the Sizes pane. Start by clicking the New... button. You
can modify existing devices afterwards with the Edit... function. You can remove
sizes by selecting the sizes and clicking the Delete button.
Result
You can preview the modeled device by clicking the Preview button. The sample
fan appears in the preview as follows:
If you are satisfied with the result, accept the product by clicking Ok.
When you have modeled all sizes you need, accept your modeling by clicking
Ok in the main dialog. The fan then appears in the list of modeled fans.
Pipe components
In this example we model a zone valve. Other pipe components are modeled in
the same way.
Starting modeling
Start modeling the zone valve by selecting Insert --> Heating/Water System -->
Component --> Zone valve The main dialog of pipe component modeling
opens.
5
3
1) General
o
ID Give here a unique identifier for the product, eg. ZV (Zone Valve). ID
is shown in MagiCAD's selection lists only if Code is not defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Zone Valve). If Code
is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) 3D Symbol
If you want to model the valve in 3D, you have two alternatives to define its
appearance:
o
3) Sizes
Model the valve sizes in the Sizes pane. Start modeling the sizes by clicking the
New... button. You can modify existing devices afterwards; in that case click the
Edit... button. You can remove sizes by selecting the size and clicking the Delete
button.
4) Preview
You can preview existing devices with the Preview function.
5) Type
With this option you can define the valve as an automatic zone valve.
Kv value
1,6
4,0
7,1
11
Start modeling the valve by clicking New... in the Sizes pane. The valve
modeling dialog opens.
1) General
o
ID Give here an unique ID for the device. Next give eg. the connection
size of the device (ZV-50)
Product Code Give here the product code of the device. This value
appears in MagiCAD in the selection lists and dimension texts (eg. ZV-50).
If Product Code is not given, ID appears instead in MagiCAD selection
lists.
2) Dimensions
Give here the dimensions of the device.
o
If you model the valve with 3D dimensions, click the Edit Shape / Qmodel
button to model the dimensions. In addition the document contains further
information about dimension parameters.
3) Dp-range
Give here the limits of the operation range:
o
4) Dp-Curves
Here you can define the preset (adjustment) values for the valve. Start modeling
the adjustment values by clicking the New button. The dpCurve dialog opens.
You can define the adjustment values either by giving the flowrate (qv [l/s]) and
pressure drop (dp [kPa], intersection from the curve) or giving the kv value for
the adjustment value (the kv value for each adjustment value is presented in the
manufacturer's brochure/catalog).
The kv value for the sample device is given earlier in this chapter.
You can edit the devices afterwards by selecting the size and clicking the Edit
button. You can remove sizes by selecting the size and clicking Delete.
Result
Click the Preview button to preview the modeled device. Our sample device
appears in the preview as follows:
If you are satisfied with the result, accept it by clicking Ok in the device
modeling dialog.
4
5
1) General
o
ID: Give the unique identifier for the device. In addition to the ID, give e.g.
the connection size of the device (ZV-2-50)
Product Code: The value of this field appears in the selection lists of
MagiCAD, and it can be used in the dimension texts (e.g. ZV-2-50). If the
product code is not defined, ID is showed in the selection lists of MagiCAD.
Version: In this field you can give e.g. the modeling date of the device.
2) Dimensions
Give the dimensions of the device in these fields.
o
If you model the valve with 3D dimensions, click the Edit Shape / Qmodel
button to model the dimensions. In addition the document contains further
information about dimension parameters.
3) DP-Curve Reference Point
Give here the values of the valve that is completely open.
4) Diagram DP-Range
Give here the limits of the operation range:
o
5) Setting Range
o
pMin [kPa]: Minimum differential pressure that can be set to the line
pMax [kPa]: Maximum differential pressure that can be set to the line
qvMax for dpMax [l/s]: Maximum flowrate of the size with the maximum
differential pressure that can be set to the line
Heating/Cooling devices
This example guides you to model a radiator. Other Device is modeled mainly
likewise.
Modeling a radiator
Start modeling a radiator by selecting Insert --> Heating/Water System -->
Heating/Cooling Device --> Radiator The radiator modeling dialog opens.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Heating Radiator). If
Code is not defined, ID is shown in MagiCAD's selection lists.
Code mask In this field you can define the format of the product code in
the bill of materials. With the {B} and {H} parameters you can determine
the place of the radiator width and height on the product code. In our
example the product code appears as
HR-Height-Width in the bill of materials.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Shape
Select here whether you want to use a conventional radiator shape definition
(Box) or a Qmodel.
3) Geometric model
If you use Qmodel, select the model to this field.
4) Connections
The picture in this pane shows the possible radiator connections when shapes are
used. Give the connections that are allowed with this radiator in the Allowed
connections field.
5) Sizes
Model the radiator sizes in the Sizes pane. Click the Add... button. Give the
width of the radiator in the B [mm] field, and the height of the radiator in the
H[mm] field. You can delete sizes by selecting a size and clicking the Delete
button.
6) Power params
Give here the power calculation factors (MagiCAD uses these factors when
calculation radiator capacities). Methods 1-3 are based on the EN442 and 6
based on DIN4703-3 standards (the factors can be obtained from the
manufacturer). Formula 5 suits well especially for calculating the capacities of
old radiators.
Method no.
Formula
Notes
= K T H b T c
= K T H b T ( c +c H )
EN-442
= K T H b T ( c +c H ) q m c
EN-442
= K T H b T ( c +c H ) q m c
Tin Tout
Troom
2
EN-442
= KT H b
= n * (T/ Tn) n
DIN4703-3
Parameters
Formulas 1-5
Formula 6
Param 1
KT
Height
Param 2
Param 3
B
C0
Param 4
C1
Param 5
Fig. 38. Explanations for the parameters in the heating capacity formulae
7) Volume params
Enter here the coefficient for the water volume formulae.
Formula no.
Formula
Notes
V = a H L +b H + d
V = aH L +bH + cL + d
Parameters
Formula 1
Formula 2
Param 1
Param 2
Param 3
Param 4
Fig. 40. Explanations for the parameters in the water volume formulae
8) Preview
Once you have given all input data, you can preview the radiator by clicking the
Preview button.
If you are satisfied with the settings and want to accept the radiator, click Ok in
the radiator modeling dialog. The radiator then appears in the list of modeled
products.
Water radiator
Modeling a water radiator
Start modeling the water radiator by selecting Insert --> Heating/Water System -> Water -->Water radiator The water radiator modeling dialog opens.
1) General
o
Code This value appears in the selection lists of MagiCAD and it clarifies
which device is in question. If Code is not defined, ID is showed in the
selection lists of MagiCAD.
Codemask This field defines the appearance of the product code in the
bill of materials. With the {B} (width) and {H} (height) parameters you can
define where the width and height are presented in the code. In this
example, the bill of material contains HWR-Width-Height.
Market Area Here you can list the market areas where the product appear
in the selection lists. If you leave this field blank, the product appears in all
market areas. The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
Version You can type e.g. the modeling date in this field.
2) Shape
Select here whether you want to use a conventional radiator shape definition
(Box) or a Qmodel.
3) Geometric model
If you use Qmodel, select the model to this field.
4) Connections
The picture in this pane shows the possible radiator connection when shape is
used. Give the connections that are allowed with this radiator in the Allowed
connections field.
5) Sizes
Model the radiator sizes in the Sizes pane. Click the Add... button. Give the
width of the radiator in the B [mm] field, and the height of the radiator in the
H[mm] field. You can delete sizes by selecting a size and clicking the Delete
button.
8) Preview
Once you have given all input data, you can preview the radiator by clicking the
Preview button.
If you are satisfied with the settings and want to accept the radiator, click Ok in
the radiator modeling dialog. The radiator then appears in the list of modeled
products.
Water devices
Modeling water points
Start modeling water points by selecting Insert --> Heating/Water System -->
Water Device The water point modeling dialog opens.
8
4
1) General
o
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Shower). If Code is
not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
2) Device Type
Select here the type of the water point:
o
3) Flow type
If either Cold water only or Hot water only is selected, further specification of
the water point is given in the Flow Type options:
o
Fire hydrant
4) Flow Data
Give the nominal flowrate and the pressure drop in the qv [l/s] and dp [kPa]
fields.
5) Dimensions
Give here the dimensions for the water point:
o
Default value for installation height [mm] you can change the installation
height when you select the water point
7) 2D-Symbol
The dimensions are updated in the 2D Symbol window.
8) 3D-Symbol
Here you can select the 3D symbol for the water point. Click the Qmodel
button to select the Qmodel for it. It is possible to define also the dimensions for
some models with the Paramsfunction. However, define the dimensions so
that they match with the values that are given in the Dimensions fields.
Once you have entered the data for the water point, accept it by clicking the Ok
button. The modeled water point then appears in the list of the modeled products.
Sprinklers
Modeling a sprinkler
Start modeling the sprinkler by selecting Insert Heating/Water System
Sprinkler The sprinkler modeling dialog opens.
1
2
3
1) General
o
ID Give here a unique identifier for the product, eg. SPR-15. ID is shown
in MagiCAD's selection lists only if Code is not defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Sprinkler-15). If Code
is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Installation definitions
Select here the installation alternatives for the sprinkler.
3) Technical
Here you can define technical properties for the sprinkler:
o
Response class
o
RS Response special
QR Quick responce
k-factor [dm3/min 1bar] how many liters per minute flows through the
nozzle at the pressure of one bar)
5) 3D-Symbol
Here you can select the 3D symbol for the sprinkler. Click the Qmodel button
to select the Qmodel for it. Define the dimensions for the sprinkler with the
Paramsfunction.
Once you have entered the data for the sprinkler, accept it by clicking the Ok
button. The modeled sprinkler then appears in the list of the modeled products.
Sewer points
Modeling sewer points
Start modeling the sewer points by selecting Insert --> Sewer --> Device from
the pulldown menu. The sewer point modeling dialog opens.
4
6
1) General
o
ID Give here a unique identifier for the product, eg. SP-1 (Sewer Point).
ID is shown in MagiCAD's selection lists only if Code is not defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Sewer Point-110). If
Code is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Dimensions
Give here the dimensions of the sewer point:
o
3) 2D-Symbol
Select here the symbol for the sewer point.
4) Default values
Give here the default nominal flow and height level for the sewer point in the qv
[l/s] and H-installation [mm] fields. You can choose other values when you
select the sewers.
5) 3D-Symbol
Here you can select the 3D symbol for the sewer point. Click the Qmodel
button to select the Qmodel for it. It is possible to define also the dimensions for
some models with the Paramsfunction. However, define the dimensions so
that they match with the values that are given in the Dimensions fields.
6) Preview
Click the Preview button to have the preview of the dimensional drawing.
Once you have given the information, accept the product with the Ok button.
The sewer point appears in the list of the modeled products.
Sewer components
Starting modeling
Start modeling sewer components by selecting Insert --> Sewer -->
Component The modeling dialog opens.
2
3
1) General
o
ID Give here a unique identifier for the product, eg. SC-1 (Sewer
Component). ID is shown in MagiCAD's selection lists only if Code is not
defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. Cleaning Cover). If
Code is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Symbol Group
Select here the symbol for the sewer component.
Tip: It is possible to draw 2D symbols (User Symbol) for all components in
MagiCAD.
3) Sizes
Model the the sewer component sizes in the Sizes pane. Start by clicking the
New... button. You can modify existing devices afterwards with the Edit...
function. You can remove sizes by selecting the sizes and clicking the Delete
button.
NB: If a Qmodel is used, it is possible to define dimensions for the model in the
size modeling dialog.
4) 3D-Symbol
You can select a 3D symbol for the sewer component. Select a suitable Qmodel
with the Qmodel function.
5) Preview
By clicking the Preview button you can preview the modeled sewer components.
ID Give here a unique identifier for the product, containing eg. the
connection size (SC-1-110).
Product code This value appears in MagiCAD's selection lists, and it can
be used for clarifying what kind of product is in question (eg. Cleaning
Cover-110). If Productcode is not defined, ID is shown in MagiCAD's
selection lists.
2) Dimensions
Give here the dimensions of the component:
o
Qmodel if you have chosen to use a Qmodel in the main dialog, you can
give here the dimensions for it. However, define the dimensions so that they
match those given in the Dimensions fields.
Once you have entered the data for the sewer component, accept it by clicking
the Ok button.
Define the other sizes likewise.
When all sizes are modeled, accept the product by clicking the Ok button in the
main dialog of pipe component modeling. The sewer component then appears in
the list of the modeled products.
Electric devices
All electric devices are modeled in the same way, however, luminaires have a n
additional field (light source). The devices can be modeled either as individual
products or product families.
As an example we model a luminaire. Start modeling by selecting Insert
Electric devices Luminaires... The Product... dialog opens.
In this dialog you can select to model either an individual product or a product
family.
1) General
o
ID Give here a unique identifier for the product, eg. L1-58W. ID is shown
in MagiCAD's selection lists only if Code is not defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. L1-58W). If Code is
not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Main Dimensions
Here you can define the main dimensions for the device.
o
Height [mm]
3) Data
Here you can define technical data for the device.
o
IP Class
Light source
4) 3D-symbol
Here you can select a 3D symbol for the device. Set the Qmodel option active
and click the Qmodel... button. The Select Model dialog opens.
A
B) Models
Available Qmodels.
C) Preview
Preview window of the Qmodel. It is possible to rotate and zoom the
model in the preview window.
o
Accept your choices with Ok. The device then appears in the list of modeled
products.
3
5
1) General
o
ID Give here a unique identifier for the product, eg. L2-58W. ID is shown
in MagiCAD's selection lists only if Code is not defined.
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. L2-58W). If Code is
not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Data
Here you can define data that is common to all devices in the product family.
o
IP Class
3) Default Values
Here you can define default values for the devices (not yet applicable).
4) 3D-symbol
Here you can select a 3D symbol for the devices. Set the Qmodel option active
and click the Qmodel... button. The Select Model dialog opens.
A
B) Models
Available Qmodels.
C) Preview
Preview window of the Qmodel. It is possible to rotate and zoom the
model in the preview window.
o
6) Preview
Preview button opens a preview dialog where you can examine the modeled
device.
Accept your choices with Ok. The device then appears in the list of modeled
products.
4
Fig. 53. Product Size dialog
1) General
o
Code This value appears in MagiCAD's selection lists, and it can be used
for clarifying what kind of product is in question (eg. L2-2X58W). If Code
is not defined, ID is shown in MagiCAD's selection lists.
Market Area Here you can define all market areas in which you want to
include the product (ie. show in the selection lists). If you leave this field
blank, the product is shown in all market areas.
The available market areas:
fin, swe, gbr, deu, nor, fra, esp, ita, pol, dnk, cze, prt, hun, nld, isl, est, ltu,
lva, rus, bel, chn, tur
2) Data
Here you can define technical data for the product.
o
Light source
3) Main Dimensions
Here you can define the main dimensions for the device.
o
Height [mm]
If you have chosen to use a Qmodel and the model is made to be scalable, you
can define the dimensions of the model. Give the dimensions with the Qmodel
Paramsfunction in the Device Shape dialog. However, define the dimensions
so that they match with the values that are given in the Main Dimensions fields.
4) Preview
When you click the Preview button you can examine the modeled device.
54