Professional Documents
Culture Documents
In this brochure you will find more than 100 different knife blades, more than 100 different router
bits, and a whole range of other accessories like plotting pens and refills, crease wheels, crease
blades and milling accessories.
To get the very best performance from your Kongsberg table, we develop these tools in close
cooperation with the manufacturers. Please be aware that developing new tools for the Kongsberg
tables is a ongoing process. For the latest updates and additions, visit the Esko Store at
www.esko.com/store.
The new Kongsberg bits and blades finder in the Esko Store will help you select the bits and blades
that fit best with your cutting table, tools and cutting method.
The advanced filtering option will help you narrow your bits and blades search result and youre
able to compare products, allowing you to select the best suited for your job.
Below you can see an example of a bit identifying code and how it describes the characteristics of
ii
Total length
Flute length
Tip diameter
Shank
diameter
Single flute
Up cut
Acrylic
Bit
Contents
Kongsberg bits and blades
Tool to blade cross reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Knife Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SR6xxx (single edge round 6mm) oscillating blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8mm shaft blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SFxxx (single edge flat) blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SR6xxx/DR6 (single/double edge round 6mm) static cutting blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
KC1xx (kiss cut) blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Special purpose heavy-duty flat blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DFxxx (double-edge flat) and RCxxx (rota cut) blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SR6xxx (single edge round 6mm) foam blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SR6xxx (single edge round 6mm) serrated blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
SFxxx (single edge flat) foam blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SFxxx (single edge flat) serrated blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SFxxx (single edge flat) standard blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Milling Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6mm multi purpose milling bits (up cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6mm multi purpose milling bits (down cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6 and 8mm super sharp milling bits (up cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6mm super sharp milling bits (down cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
6mm soft metal single flute bits (up cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
6mm soft metal single flute bits (down cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6mm wood double flute bits (up cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
6mm wood double flute bits (down cut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3mm multi purpose milling bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3mm super sharp milling bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6mm special purpose milling bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Milling accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Drawing tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Crease Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
15mm crease wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
26mm crease wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
60mm crease wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
150mm crease wheels and crease blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
XL/XN/VL tools
PressCut
Page 16
Rotacut
Page 20
Varicut
Page 12, 20
XP/C tools
Rotacut
Page 20
KissCut knife
Page 16
Microcut tool
Bevel knife
Page 11
V-notch knife
Page 18
V-notch (Powerhead insert)
Page 18
RB90 Knife
Page 18
Rotacut
Page 20
Kongsberg XE
Kongsberg VL
Kongsberg XN
Kongsberg XP
Kongsberg C
The metals used to create our bits and blades are carefully selected to resist wear and breakage. Then, they
are ground to extremely tight tolerances. Before they are shipped to you, they undergo 100% quality control to
make sure you are working with the best possible tools.
Knife Blades
Esko Kongsberg offers a wide range of high quality blades, specially designed to optimize your Kongsberg
cutting system with focus on consistent production with top quality result and a minimum of machine down time
for blade exchange.
Kongsberg blades are developed, manufactured and tested by your Kongsberg team in association with
selected blade manufacturers. By using our blades you ensure you are on top of the production and achieve
the best quality cutting and the longest blade life length.
Benefits with your Esko Kongsberg knife blades.
Long life length
Knife Blades
SR6xxx (single edge round 6mm) oscillating blades
SR6xxx (single edge round 6mm) blades for cutting with oscillating knife tool.
Our various oscillating tools come with different characteristics for optimized performance
on a wide range of hard-to-cut materials. Stroke length ranges from 0,3mm to 8mm and
frequency ranges from 4000 to 12000 strokes pr minute.
The knife blades shown in this section are designed to match the tooling properties,
enabling high speed and precision cutting across a wide range of materials.
These are long-lasting tungsten carbide blades for maximum performance.
B LD- SR 6 31 0
4
Diameter
Round
Single
Edge
Blade
corrugated dispay
foam signage
34053207
34073080
VibraCut/HI Frequence
VibraCut knife tool
34046425
34053207
34073080
VibraCut/HI Frequence
VibraCut knife tool
34046425
Blade
part no.
Blade
name
Description
Max
cutting
42437293
BLDSR6223
12mm
1/2
XE*
42438135
BLDSR6224
12mm
1/2
XE*
Picture
top seller
Adapter
top seller
Tool insert
Blades optimized for cutting different heavy duty paper-based and other sandwich materials
34053207
34073080
42441626
VibraCut/HI Frequence
VibraCut knife tool
34046425
34053207
34073080
VibraCut/HI Frequence
VibraCut knife tool
34046425
42441634
BLDSR6310
20mm
3/4
BLDSR6307
20mm
3/4
top seller
Blades optimized for cutting foam board, other sandwich materials and rubber
Recip./MP HF knife tool
34053207
34073080
VibraCut/HI Frequence
VibraCut knife tool
34046425
34053207
34073080
VibraCut/HI Frequence
VibraCut knife tool
34046425
42441642
BLDSR6303
42447227
BLDSR6375
20mm
3/4
34073080
VibraCut/HI Frequency
VibraCut knife tool
34046425
34053207
34073080
VibraCut/HI Frequency
VibraCut knife tool
34046425
42449504
BLDSR6315
14mm
9/16
XE*
42459743
BLDSR6316
14mm
9/16
XE*
NEW
XL
XP XN
C VL XE
Knife Blades
8mm shaft blades
This blade design gives the tool excellent performance when cutting rigid materials such
as display carton, rigid plastics, foamed PVC (Forex / Sintra), and several gasket materials.
These are long-lasting tungsten carbide blades for maximum performance.
Our range of 8mm round shaft blades are superior for cutting many different rigid materials
with the RM (Rigid Material) knife tools, both for the Kongsberg XN/XL/VL and the XP/C
platforms.
The DR-A blades have an asymmetric, double edge. The purpose is to reduce
burrs on one side of the cut, i.e. line direction control is required.
The SR (single round) has a single edge, with the tip offset 4mm from the shaft
center (4mm lag).
BLD- DR 828 0A
6
corrugated plastic
Assymetric
Diameter
Round
Double
Edge
Blade
Blade name
Description
Max
cutting
N/A
42447235
BLD-DR8160
6mm
1/4
N/A
42447284
BLD-DR8180
5mm
3/16
Picture
top
seller
Adapter
N/A
N/A
42452227
42452235
BLD-DR8280A
5mm
3/16
BLD-DR8210A
4mm
5/32
N/A
42450494
BLD-SR8124
10mm
3/8
N/A
42455899
BLD-SR8140
7mm
9/32
N/A
34094458
BLD-SR8160
13mm
1/2
N/A
34094466
BLD-SR8180
8mm
5/16
XL
XP XN
C VL XE
Knife Blades
SFxxx (single edge flat) blades
gaskets
flexo plates
B LD-SF23 8
8
Flat
Single
Edge
Blade
Blades optimized for cutting different grades of thinner materials like folding carton, paper and vinyl.
Adapter
MP HF knife
tool
34050401
Static knife
single edge
34044172
Vibracut/HF
VibraCut
34050880
Hi-force knife
tool
34057380
Blade
part no.
Blade
name
42441212
BLDSF216
(i-216)
2-3mm
42441220
BLDSF217
(i-217)
2-3mm
BLDSF238
---
42423020
BLDSF224
---
42458364
BLDSF230
(i-230)
2mm
5/64
42458372
BLDSF231
(i-231)
2mm
5/64
Description
Max
cutting
Picture
top seller
Tool insert
Static knife
single edge
34044172
Vibracut/HF
VibraCut
34050880
Hi-force knife
tool
34057380
top seller
MP HF knife
tool
34001925
42423012
Static knife FC
34002709
Reciprocating
knife tool
34001925
Static knife FC
34002709
Static knife
single edge
34044172
Vibracut/HF
VibraCut
34050880
Hi-force knife
tool
34050807
34044172
Vibracut/HF
VibraCut
34050880
Hi-force knife
tool
34050807
XL
XP XN
C VL XE
Knife Blades
XL
XP XN
C VL XE
Tool insert
Adapter
Static knife
single edge
34044172
Vibracut/HF
VibraCut
34050880
Blade
part no.
Blade
name
Description
42458380
BLDSF233
(i-233)
Max
cutting
Picture
5mm .19
Blades optimized for cutting corrugated board with high recycled content; can also perform well in foam board.
Reciprocating
knife tool
34001925
Reciprocating
knife tool
34001925
42416651
42416644
Static knife TW 34012575
BLDSF115
13mm
1/2
BLDSF125
16mm
5/8
10
MP HF knife
tool
34044107
Vibracut/HF
VibraCut
34047241
Hi-force knife
tool
34046557
MP HF knife
tool
34044107
Vibracut/HF
VibraCut
34047241
Hi-force knife
tool
34046557
MP HF knife
tool
34044107
Vibracut/HF
VibraCut
34047241
Hi-force knife
tool
34046557
MP HF knife
tool
MP HF knife
tool
42421974
BLDSF420
(i-420)
10mm
3/8
42458257
BLDSF421
(i-421)
10mm
3/8
42458265
BLDSF422
(i-422)
10mm
3/8
34050401
42458273
BLDSF425
(i-425)
6mm
34050401
42458281
BLDSF426
(i-426)
6mm
Blade
part no.
Blade
name
Description
42458299
BLDSF427
(i-427)
10mm
3/8
34044107
42458307
BLDSF428
(i-428)
23mm
.90
34044107
42458315
BLDSF429
(i-429)
29mm
1.10
Tool insert
Adapter
MP HF knife
tool
34044107
Vibracut/HF
VibraCut
34047241
Hi-force knife
tool
34046557
MP HF knife
tool
MP HF knife
tool
Max
cutting
Picture
Blades for cutting in 45 degrees angle with the Bevel knife tool
42443978
BLDSF212
7mm
9/32
42455287
BLDSF245
6mm
1/4
Blades for static cutting of gaskets and other highly abrasive materials.
Static knife
gasket
34031021
42423855
BLDSF310
10mm
3/8
42423871
BLDSF320
10mm
3/8
42423863
BLDSF311
7mm
9/32
42423889
BLDSF321
7mm
9/32
Blades optimized for cutting gasket materials with the MP HF knife tool
MP HF knife
tool
HF VibraCut
34089995
MP HF knife
tool
34073056
HF VibraCut
42447961
BLDSF312
7mm
9/32
42447979
BLDSF313
7mm
9/32
34073056
34089995
XL
XP XN
C VL XE
11
Knife Blades
Blades for cutting foam core board materials
XL
XP XN
C VL XE
12
Tool insert
Adapter
Blade
part no.
Blade
name
Static knife
double edge
34044206
42458398
BLDSF246
(i-246)
10mm
3/8
Static knife
double edge
34044206
42458406
BLDSF346
(i-346)
10mm
3/8
Description
Max
cutting
Picture
SR6xxx / DR6 (single/double edge round 6mm) blades for static cutting with the Hi-Force
knife tool. These are long lasting tungsten carbide blades for maximum performance.
The 6mm round stock blades for the Hi-Force knife tool come in three different shapes, all
with a centered tip.
The DR-A blades have an asymmetric double edge. The purpose is to reduce burrs
on one side of the cut (i.e., line direction control is required).
Diameter
Round
Single
Edge
Blade
B LD- SR 6 15 0
13
Knife Blades
Blades optimized for cutting different thinner flexible materials
XP
C
XE
Tool insert
Adapter
34068759
Blade part
number
Blade name
Description
42445494
BLD-SR6150
5mm
3/16"
42445502
BLD-SR6152
5mm
3/16"
34061135
Static Knife tool
Hi-Force Knife tool
34068759
Max
cutting
Picture
34068759
42445510
BLD-DR6160
5mm
3/16
BLD-DR6161
3mm
1/8
34061135
Static Knife tool
Hi-Force Knife tool
34068759
42445528
34061135
Asymmetric knife blade that pushes all burrs and waste to one side for thinner flexible or rigid materials
Hi-Force Knife tool
34068759
42449058
34061135
34068759
42458828
34061135
14
BLD-SR6159A
3mm
1/8
3mm
1/8
top seller
KC1xx (kiss cut) blades for cutting various thin materials like adhesive foils, paper etc. The
blades are kept in the tool body with a friction lock.
Kiss Cut
Blade
B LD -KC10 1
15
Knife Blades
Blades optimized for kiss cutting various thinner flexible materials
XL
XP XN
C VL XE
Tool insert/unit
Adapter
Blade
part no.
Max
cutting
Description
1mm
1/25"
PressCut tool
N/A
42438499
BLD-KC101
(i-101)
N/A
42438507
BLD-KC102
(i-102)
1mm
1/25"
N/A
42458323
BLD-KC103
(i-103)
1mm
1/25"
42447532
BLD-KC104
(i-104)
1mm
1/25"
42458331
BLD-KC105
(i-105)
1mm
1/25"
BLD-KC154
(i-154)
1mm
1/25"
PressCut tool
PressCut tool
PressCut tool
N/A
Kiss Cut knife tool
PressCut tool
N/A
Kiss Cut knife tool
PressCut tool
N/A
Kiss Cut knife tool
16
42458349
Picture
top seller
Blade name
Special purpose heavy-duty flat blades, TZ1xx, TZ5xx, (Trapezoid), DF5, (double flat),
SF29x (single flat)
Re-board display
Trapezoid
Blade
B LD -T Z12 9
17
Knife Blades
Tungsten carbide blades optimized for long-life V-notch cutting tough
paper-based materials like Re-board, triple wall corrugated, etc
XP XL
C XN
Tool insert
Adapter
Blade
part no.
Blade
name
42448589
BLDTZ511
17mm
43/64
BLDTZ512
17mm
43/64
HD tool unit
PowerHead
HD tool unit
V-Notch tool
holder / HD
knife tool 17
42448597
Max
cutting
PowerHead
V-Notch tool
holder
Description
Picture
Standard blades for cutting tough paper-based materials like Re-board, triple wall corrugated, etc.
BLDTZ129
17mm
43/64
BLDTZ192
17mm
43/64
PowerHead
HD tool unit
PowerHead
HD tool unit
V-Notch tool
holder
V-Notch tool
holder / HD
knife tool 17
42435636
42424374
34061218
HD tool unit
BLDTZ230
30mm
13/16
Tungsten carbide blades optimized for long-life V-notch cutting tough paper-based
materials like Re-board, triple wall corrugated, etc., for use in the VI45 tool insert.
XL
XN
VL
All insert
positions on
XN / XL / VL
tool heads
VI45-16
V-Notch
tool insert
42455279
BLDDF570
Specially made arrow-shaped blade for the VI4516 V-notch insert tool. Works well in materials such
as fluted core boards and triple wall corrugated.
Made from a special Tungsten Carbide alloy, to
extend lifetime. Thickness 0.9mm - .035
16mm
5/8
Tungsten carbide blades optimized for long-life high speed straight cutting
tough paper-based materials like Re-board, triple wall corrugated, etc.
XL
XN
VL
18
All insert
positions on
XN / XL / VL
tool heads
34094581
BLDSF290
16mm
5/8
Double-edge flat blades with a centered tip for cutting hard, thinner materials. RC blade
for cutting textile materials with the RotaCut tools.
These are long lasting tungsten carbide blades for maximum performance.
Flat
Double
Edge
Blade
paper invitations
B LD-DF 21 2
19
Knife Blades
Double-edge blades with a centered tip. Have grinded edge on both ends.
XL
XP XN
C VL XE
Tool insert
Adapter
34044206
Blade
part no.
42441196
Heavy duty Insert for
PowerHead / HD unit
34089904
34044206
42441204
Max
cutting
Blade name
Description
BLD-DF212
(i-312)
General-purpose, double-sided,
80 sword knife blade for flexible
materials. Used for through-cutting
paper, cardboard, vinyl, thin
plastics, styrene, etc
5mm
3/16
BLD-DF213
(i-313)
General-purpose, double-sided,
60 sword knife blade for flexible
materials. Used for through-cutting
paper, cardboard, vinyl, thin
plastics, styrene, etc.
5mm
3/16
34089904
Picture
34057356
42444299
BLD-DF112
(i-308)
General-purpose, double-sided,
80 sword knife blade for flexible
materials. Used for through-cutting
paper, cardboard, vinyl, thin
plastics, styrene, etc
5mm
3/16
BLD-DF113
(i-309)
General-purpose, double-sided,
60 sword knife blade for flexible
materials. Used for through-cutting
paper, cardboard, vinyl, thin
plastics, styrene, etc.
5mm
3/16
VariCut tool
Hi-Force knife tool
34057356
42443036
34053686
VariCut tool
20
42444844
BLD-RC110
1,5mm
1/16
These are long lasting tungsten carbide blades for maximum performance.
Foam cutting performance determined by matching knife blade design and tool
properties such as oscillation frequency and stroke length. With XN and XL tables,
the foam tooling requires high (95mm) traverse clearance. The pointed blades often
provide the best detail accuracy. With the pointed blades it is possible to increase
cutting speed by using the 5,5mm felt cutting underlay.
protective packaging
Diameter
Round
Single
Edge
Blade
B LD- SR 6 31 3
21
Knife Blades
Blades for cutting different grades of foam materials up to maximum 30mm -1 thickness
XP XL
Tool insert
C XN
Foam Knife
Foam Head
Foam Unit
Foam Knife
Foam Head
Foam Unit
Foam Knife
Adapter
Description
34057125
42443101
BLD-SR6311
32mm
1 1/4
42443093
BLD-SR6312
32mm
1 1/4
42443085
34053231
34057125
34053231
34057125
Max
cutting
Picture
32mm
1 1/4
Blades for cutting different grades of foam materials up to maximum 55mm -2 1/8 thickness
34057745
42444877
34057745
42444885
BLD-SR6522
55mm
2 1/8
42444893
55mm
2 1/8
Foam Head
Foam Unit
Foam Head
Foam Unit
Foam Head
34057745
Foam Unit
55mm
2 1/8"
Blades for cutting different grades of foam materials up to maximum 80mm -3 1/8 thickness
Foam Head
Foam Head
22
34032490
34032490
42444919
42444927
BLD-SR6831
80mm
3 1/8
BLD-SR6832
80mm
3 1/8
top seller
Blade name
34053231
Foam Head
Foam Unit
Blade
part no.
SR6xxx (single edge round 6mm) serrated blades for cutting different qualities and
thicknesses of honeycomb and papercore board materials. Also good for some dense
foam materials.
Our oscillating foam cutting tools are optimized to work with these knife blades with
regards to stroke amplitude and frequency. For the XL and XN, these tools require high
(95mm) traverse clearance. When working with these tools and blades, you can often
achieve better productivity with the 5,5mm felt cutting underlay.
These are long lasting tungsten carbide blades for maximum performance.
honeycomb signs
Diameter
Round
Single
Edge
Blade
thick Re-board
B LD- SR 6 35 1
23
Knife Blades
Blades for cutting different grades of tough paper materials up to maximum 30mm -1 thickness
XP XL
Tool insert
C XN
Foam Knife
Adapter
Foam Knife
34057125
Foam Unit
Foam Knife
34057125
Foam Knife
34057125
32mm
1 1/4
BLD-SR6352
32mm
1 1/4
42456947
BLD-SR6353
32mm
1 1/4
42456954
32mm
1 1/4
42456921
42456939
34053231
Foam Head
Foam Unit
BLD-SR6351
34053231
Foam Head
Foam Unit
Description
34053231
Foam Head
34057125
Max
cutting
Blade name
34053231
Foam Head
Foam Unit
Blade
part no.
Picture
Blades for cutting different grades of paper sandwich materials up to maximum 55mm -2 1/8 thickness
BLD-SR6551
55mm
2 1/8
BLD-SR6552
55mm
2 1/8
BLD-SR6553
55mm
2 1/8
Foam Head
34057745
42456962
Foam Unit
Foam Head
34057745
42456970
Foam Unit
Foam Head
34057745
Foam Unit
24
42456988
SFxxx (single edge flat) blades for cutting foam material of different grades and
thicknesses. These blades are made of HSS steel, which means it is less expensive and
also offers less tendency to snag compared to tungsten carbide.
Our oscillating foam cutting tools are optimized to work with these knife blades with
regards to stroke amplitude and frequency. For the XL and XN these tools require the high
(95mm) traverse clearance. When working with these tools and blades, you can often
achieve better productivity with the 5,5mm felt cutting underlay.
protective packaging
Diameter
Flat
Single
Edge
Blade
BLD-SF50 5
25
Knife Blades
Blades for cutting different grades of foam materials up to maximum 40mm -1 thickness
XP XL
Tool insert
C XN
Foam Knife
Foam Head
Foam Unit
Foam Knife
Adapter
Blade
name
Description
Max
cutting
42423251
BLDSF501
40mm
1 9/16"
BLDSF502
40mm
1 9/16"
Picture
34010330
34014845
34010330
Foam Head
Foam Unit
Blade
part no.
34014845
42423269
Blades for cutting different grades of foam materials up to maximum 60mm -2 3/8 thickness
Foam Head
34014803
42423293
BLDSF505
60mm
2 3/8
42423301
BLDSF506
60mm
2 3/8
Foam Unit
Foam Head
34014803
Foam Unit
Blades for cutting different grades of foam materials up to maximum 86mm -3 3/8 thickness
Foam Head
Foam Head
26
34002659
34002659
34012716
34012708
BLDSF509
86mm
3 3/8
BLDSF510
86mm
3 3/8
SFxxx (single edge flat) serrated blades for cutting different qualities and thicknesses of
honeycomb and papercore board materials. Also good for some dense foam materials.
Our oscillating foam cutting tools are optimized to work with these knife blades with
regards to stroke amplitude and frequency. For the XN and XL these tools require the high
(95mm) traverse clearance. When working with these tools and blades, you can often
achieve better productivity with the 5,5mm felt cutting underlay.
These blades are made of HSS steel, which means a lower price and less tendency to
snag compared to tungsten carbide.
Re-board furniture
Flat
Single
Edge
Blade
B LD-SF50 7
27
Knife Blades
Blades for cutting different grades tough paper materials up to maximum 40mm -1 9/16 thickness
XP XL
C XN
Tool insert
Adapter
Foam Knife
34010330
Foam Head
Blade
part no.
42423277
34014845
Blade
name
BLDSF503
40mm
1 9/16
BLDSF504
40mm
1 9/16
34010330
Foam Head
42423285
34014845
Max
cutting
Foam Unit
Foam Knife
Description
Foam Unit
Picture
Blades for cutting different grades of paper sandwich materials up to maximum 60mm -2 3/8 thickness
Foam Head
34014803
42423319
BLDSF507
60mm
2 3/8
BLDSF508
60mm
2 3/8
Foam Unit
Foam Head
34014803
42423327
Foam Unit
Blades for cutting different grades of tough paper materials up to maximum 86mm -3 3/8 thickness
28
Foam Head
34002659
34019497
BLDSF511
86mm
3 3/8
Foam Head
34002659
34019489
BLDSF512
86mm
3 3/8
Foam Head
34002659
34019471
BLDSF513
86mm
3 3/8
SFxx (single edge flat) standard blades for cutting in different materials.
Flat
Single
Edge
Blade
B LD-SF17 7
29
Knife Blades
Standard low-cost blades for samplemaking with different materials.
XL
XP XN
C VL XE
Tool insert/unit
Adapter
Blade
part no.
Blade name
Description
Static knife TW
34012575
42411041
BLD-SF102
BLD-SF172
BLD-SF186
BLD-SF110
BLD-SF177
BLD-SF183
5mm
3/16
6mm
1/4
Static knife FC
34012534
Reciprocating
knife tool
34014282
Static knife FC
34012534
Vibracut / HF
VibraCut
34060525
Static knife FC
Static knife FC
General purpose
knife tool
30
34012534
34012534
34002709
42420083
42417444
42436063
42429795
42417790
34050948
42441840
BLD-SF184
34044172
42458356
BLD-SF210
(i-210)
Max
cutting
Picture
Milling Bits
When handling and storing milling bits, always treat them with great care. The bits are manufactured from
tungsten carbide, and the sharp edges are very easily chipped and degraded if they get in touch with any
hard surface.
To achieve maximum milling precision, always try to adjust the depth of cut as close as possible to the
thickness of the material when selecting a milling bit for a certain job.
When cutting material is significantly thicker than the cutting diameter, the best approach is to set the milling
lines as multi-pass operations; executing each shape multiple times, digging gradually deeper into the
material. As a general rule, the depth of each pass should not exceed 1-1.5 times the length of the cutting
diameter. There will, however, be materials where either a smaller or larger depth step is appropriate.
For milling jobs, it is recommended to program feed rates in absolute values (i.e., m/min or ips; not as a
percentage of maximum speed).
Most applications are best finished using up cut bits due to better chip removal performance. If you
encounter print chipping or lamination separation/damage, use a down cut bit to achieve the best top finish.
A down-cut bit can also be beneficial in cases where there is a problem holding down the material.
31
Milling Bits
6mm multi purpose milling bits (up cut)
Our 6mm multi purpose milling bits come in a large range of tip diameters and
spiral lengths. See chart for more details on milling diameter, milling thickness and
recomended RPM.
Total length
Flute
length
Tip
diameter
Shank
diameter
Single flute
Up Cut
Multi
Purpose
Bit
HSMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42438283
MC HP
42454728
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42438283
MC HP
42454728
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42438283
MC HP
42454728
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42443531
BITMUS06-2506-50
5mm
3/16"
Max
60
42443549
BITMUS06-3006-50
5mm
3/16"
Max
60
42437905
BITMUS06-3011-50
(i-3816 i-3862
i-3866)
10mm
3/8"
Max
60
42443556
BITMUS06-3512-50
10mm
3/8"
Max
60
42459537
BITMUS06-3014-50
13mm
1/2"
Max
60
42443564
BITMUS06-4006-50
5mm
3/16"
Max
60
42437863
BITMUS06-4012-50
10mm
3/8"
Max
60
42443572
BITMUS06-4022-50
(i-3824 i-3874)
20mm
13/16
Max
60
42451062
BITMUS06-5012-50
10mm
3/8"
BITMUS06-5022-58
20mm
13/16
BITMUS06-5020-52
(i-3880)
20mm
13/16
42444067
MC Kavo
MC VL
Max
60
42444067
MC Kavo
MC VL
5mm
3/16"
42444067
MC Kavo
MC Ibag
42444067
MC Kavo
MC VL
BITMUS06-2006-50
(i-3854)
42444067
MC Kavo
MC Ibag
42437913
Picture
42444067
MC Kavo
MC VL
Max
RPM
42444067
MC Kavo
MC Ibag
Max
milling
42444067
MC Kavo
MC VL
Description
42444067
MC Kavo
MC VL
Bit name
42444067
MC Kavo
HSMU
HPMU
MC VL
42438283
HSMU
HPMU
MC Ibag
NEW
HPMU
Collets
part no.
MC Kavo
HSMU
HPMU
VL
Milling
top seller
HPMU
XN/XL
Milling
42443598
42444067
MC Kavo
42438283
MC HP
42454728
42458802
Max
40
Max
60
Max
40
C
XP
Milling Milling
Max
60
Max
50
Max
60
33
Milling Bits
C
XP
Milling Milling
HSMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
34
Collets
part no.
MC Ibag
MC VL
42444067
MC Kavo
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
10mm
3/8"
BITMUS06-6022-58
(i-3888)
20mm
13/16
BITMUS06-6032-64
(i-3889)
30mm
1 3/16
BIT-MUS06-200650C1
5mm
3/16"
Max
60
BIT-MUS06-300650C1
5mm
3/16"
Max
60
42451112
BIT-MUS06-400650C1
5mm
3/16"
Max
60
42455857
BITMUD06-4016-64
(i-2624)
14mm
9/16"
BITMUD06-6025-64
(i-2626)
23mm
7/8"
42442715
42438077
42451096
42451104
42444067
MC Kavo
MC VL
42444067
MC Kavo
MC VL
42451070
BITMUS06-6012-50
(i-5854)
42444067
MC Kavo
MC VL
Max
milling
42444067
MC Kavo
MC VL
Description
42444067
MC Kavo
MC VL
Bit name
42444067
MC Kavo
MC VL
42444067
MC Kavo
42438283
MC HP
42454728
42455865
Max
RPM
Picture
Max
40
Max
60
Max
40
Max
60
Max
40
Max
60
Max
40
Max
60
Max
40
Max
60
top seller
HPMU
VL
Milling
top seller
HPMU
XN/XL
Milling
Our 6mm multi purpose milling bits come in a large range of tip diameters and
spiral lengths. See chart for more details on milling diameter, milling thickness
andrecomended RPM.
Total length
Flute
length
Tip
diameter
printed plastics
Shank
diameter
Single flute
Down Cut
Multi
Purpose
Bit
Milling Bits
*VL max RPM = 45
Up Cut Bit Down Cut bit HSMU = 1kW HPMU = 3kW
MultiCUT Ibag = 1kW MultiCUT VL = 1kW, max RPM = 45 MultiCUT Kavo = 1kW MultiCUT HP = 3kW
C
XP
Milling Milling
HSMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
Collets
part no.
MC Ibag
MC VL
42438283
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
MC VL
42444067
MC HP
42454728
MC VL
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42444067
MC HP
42454728
MC VL
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
HSMU
42449355
BITMDS06-2004-50
(i-2854)
3mm 1/8"
Max
60
42449363
BITMDS06-2006-50
5mm
3/16"
Max
60
42447342
BITMDS06-3011-50
(i-2862 i-2866)
10mm
3/8"
Max
60
42449371
BITMDS06-4008-50
7mm
9/32"
Max
60
42458810
BITMDS06-2008-64
(i-2804)
7mm
9/32"
Max
60
42449389
BITMDS06-4012-50
(i-2874)
10mm
3/8"
Max
60
42447359
BITMDS06-5022-60
(i-2880)
20mm
13/16"
42438283
MC Kavo
MC VL
Max
RPM
42438283
MC Kavo
MC VL
Max
milling
42438283
MC Kavo
MC Ibag
Description
42438283
MC Kavo
MC VL
Bit name
42438283
MC Kavo
MC Ibag
42438283
MC Kavo
HSMU
HPMU
VL
Milling
MC Kavo
HSMU
HPMU
XN/XL
Milling
Max
60
42438283
MC Kavo
42444067
MC HP
42454728
42458414
36
HPMU
42438283
42454728
BITMDS06-6020-64
(i-2888)
20mm
13/16
Max
50
Max
60
42458422
HPMU
Max
40
BITMDS06-6030-64
(i-2889)
30mm
1 3/16
Max
50
Max
60
Picture
Our 6mm super sharp milling bits come in a large range of tip diameters and spiral lengths.
See chart for more details on milling diameter, milling thickness and recommended RPM.
The Super Sharp bits are grinded / polished for an optimized routing surface.
Total length
Flute
length
Tip
diameter
Shank
diameter
acrylic
Single flute
Up Cut
Acrylic
Bit
acrylic
BIT-AUS06- 4022- 50
37
Milling Bits
*VL max RPM = 45
6mm Up Cut Bit 8mm Up Cut Bit HSMU = 1kW HPMU = 3kW
MultiCUT Ibag = 1kW MultiCUT VL = 1kW max RPM 45 MultiCUT Kavo = 1kW MultiCUT HP = 3kW
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
38
Collets
part no.
MC Ibag
MC VL
42444067
MC Kavo
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42437897
BITAUS06-2006-50
5mm 3/16"
Max
60
42445916
BITAUS06-3006-50
5mm 3/16"
Max
60
42437889
BITAUS06-3011-50
10mm 3/8"
Max
60
42458992
BITAUS06-3014-50
13mm 1/2"
Max
60
42449439
BITAUS06-3022-50
20mm
13/16
Max
60
42445924
BITAUS06-4008-50
7mm 9/32"
Max
60
42437848
BITAUS06-4012-50
10mm 3/8"
Max
60
Picture
42444067
MC Kavo
MC VL
Max
RPM
42444067
MC Kavo
MC VL
Max
milling
42444067
MC Kavo
MC VL
Description
42444067
MC Kavo
MC VL
Bit name
42444067
MC Kavo
MC VL
42444067
MC Kavo
42438283
MC HP
42454728
top seller
HPMU
VL
Milling
NEW
HSMU
XN/XL
Milling
top seller
C
XP
Milling Milling
HSMU
HPMU
HPMU
HPMU
HPMU
VL
Milling
Collets
part no.
MC Ibag
MC VL
42444067
MC Kavo
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
Max
RPM
42442665
BITAUS06-4022-50
20mm
13/16
Max
60
42451047
BITAUS06-5012-50
11mm 3/8"
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42443762
BITAUS06-5022-58
20mm
13/16
42438283
MC HP
42454728
Max
40
Max
40
Max
60
42451054
BITAUS06-6012-50
11mm 3/8"
Max
40
Max
60
42442707
BITAUS06-6022-58
20mm
13/16
Max
40
Max
60
42444067
MC Kavo
Picture
Max
60
42444067
MC Kavo
MC VL
Max
milling
42444067
MC Kavo
MC VL
Description
42444067
MC Kavo
MC VL
Bit name
42444067
MC Kavo
MC VL
top seller
HPMU
XN/XL
Milling
42438069
BITAUS06-6032-64
30mm 1 1/8"
Max
40
Max
60
HPMU
HPMU
HPMU
HPMU
42454736
42454561
BITAUS08-8042-76
40mm 1 1/2"
Max
30
HPMU
HPMU
42454736
42454579
BITAUS08-8055-90
50mm 2"
Max
30
JAN14 Kongsberg part no: 42458042
C
XP
Milling Milling
39
Milling Bits
6mm super sharp milling bits (down cut)
Our 6mm super sharp milling bits come in a large range of tip diameters and spiral
lengths. See chart for more details on milling diameter, milling thickness and recomended
RPM. The Super Sharp bits are grinded / polished for an optimized routing surface.
BIT-ADS06- 4012- 60
40
Total length
Flute
length
Tip
diameter
acrylic
Shank
diameter
Single flute
Down Cut
Acrylic
Bit
HSMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
XN/XL
Milling
VL
Milling
Collets
part no.
MC Ibag
MC VL
42444067
MC Kavo
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
Max
60
BITADS06-3006-50
5mm 3/16"
Max
60
42443358
BITADS06-3011-50
10mm 3/8
Max
60
42445940
BITADS06-4008-50
7mm 9/32
Max
60
42445957
BITADS06-4012-50
11mm 3/8
Max
60
42442756
BITADS06-5022-60
20mm
13/16
BITADS06-2006-50
42445932
42444067
MC Kavo
MC VL
5mm 3/16
42449488
Picture
42444067
MC Kavo
MC VL
Description
42444067
MC Kavo
MC VL
Max
RPM
Bit name
42444067
MC Kavo
MC VL
Max
milling
42444067
MC Kavo
42438283
MC HP
42454728
Max
40
Max
60
C
XP
Milling Milling
41
Milling Bits
6mm soft metal single flute bits (up cut)
6mm multi purpose bits are ideal for milling soft metals such as aluminum. See chart
for more details on milling diameter, milling thickness and recommended RPM.
Total length
Flute
length
Tip
diameter
Shank
diameter
Single flute
Up Cut
Soft Metals
Bit
ACM
HSMU
HPMU
HPMU
HPMU
HPMU
HPMU
VL
Milling
Collets
part no.
MC Ibag
MC VL
42438283
MC Kavo
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
Max
60
BITSUS06-4020-64
(i-3924)
20mm
13/16
Max
60
BITSUS06-6016-64
(i-3930)
16mm
3/8
Max
60
BIT-MUS06-200650C1
5mm
3/16"
Max
60
BIT-MUS06-300650C1
5mm
3/16"
Max
60
BIT-MUS06-400650C1
5mm
3/16"
Max
60
BITSUS06-3012-64
(i-3916)
42458471
42458489
42451096
42444067
MC Kavo
MC VL
12mm
15/32
42458463
42444067
MC Kavo
MC VL
Description
Picture
42438283
MC Kavo
MC VL
Max
RPM
Bit name
42438283
MC Kavo
MC VL
Max
milling
42451104
42444067
MC Kavo
42438283
MC HP
42454728
42451112
top seller
HPMU
XN/XL
Milling
C
XP
Milling Milling
43
Milling Bits
6mm soft metal single flute bits (down cut)
6mm multi purpose bits are ideal for milling soft metals such as aluminum. See chart for
more details on milling diameter, milling thickness and recommended RPM.
Total length
Flute
length
Tip
diameter
Shank
diameter
ACM Sign
Single flute
Down Cut
Soft Metals
Bit
printed ACM
HSMU
HPMU
HPMU
HPMU
XN/XL
Milling
VL
Milling
Collets
part no.
MC Ibag
MC VL
42438283
MC Kavo
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
Bit name
Description
Max
milling
Max
RPM
42458430
BITSDS06-3012-64
(i-2916)
12mm
15/32
Max
60
42458448
BITSDS06-4020-64
(i-2924)
20mm
13/16
Max
60
42458455
BITSDS06-5016-64
(i-2930)
16mm
5/8
Picture
42438283
MC Kavo
MC VL
42438283
MC Kavo
42444067
MC HP
42454728
Max
50
Max
60
C
XP
Milling Milling
45
Milling Bits
6mm wood double flute bits (up cut)
6mm multi purpose bits are ideal for milling wood and wood composite materials. See
chart for more details on milling diameter, milling thickness and recommended RPM.
wood signs
wood composite
42444067
HPMU
MC HP
42454728
HSMU
MC Ibag
MC Kavo
42444067
MC HP
42454728
16mm
5/8
Max 50
25mm
1
42458497
BITWUD06-4016-64
(i-5210)
BITWUD06-6025-64
(i-5212)
42438283
Up Cut
HPMU
MC VL
Description
42458752
Picture
Max 60
Max 50
Max 60
Total length
42438283
Max
RPM
Bit name
Flute
length
MC VL
Max
milling
Tip
diameter
MC Ibag
MC Kavo
Bit
HPMU
Collets
part no.
Wood
HPMU
VL
Milling
Shank
diameter
HSMU
XN/XL
Milling
Double
flute
C
XP
Milling Milling
MultiCUT Ibag = 1kW MultiCUT VL = 1kW max RPM 45 MultiCUT Kavo = 1kW MultiCUT HP = 3kW
6mm multi purpose bits are ideal for milling wood and wood composite materials. See
chart for more details on milling diameter, milling thickness and recommended RPM.
wood
HPMU
MC HP
42454728
HSMU
MC Ibag
MC Kavo
42444067
MC HP
42454728
16mm
5/8
Max 50
25mm
1
BITWDD06-4016-64
(i-5710)
BITWDD06-6025-64
(i-5712)
42438283
Down Cut
HPMU
MC VL
42458760
42458778
Picture
Max 60
Max 50
Max 60
42444067
Description
Total length
42438283
Max
RPM
Bit name
Flute
length
MC VL
Max
milling
Tip
diameter
MC Ibag
Wood
HPMU
Collets
part no.
MC Kavo
Bit
HPMU
VL
Milling
Shank
diameter
HSMU
XN/XL
Milling
Double
flute
C
XP
Milling Milling
MultiCUT Ibag = 1kW MultiCUT VL = 1kW max RPM 45 MultiCUT Kavo = 1kW MultiCUT HP = 3kW
Milling Bits
3mm multi purpose milling bits
3mm multi purpose bits are ideal for milling many small details and inside radiuses in
thinner materials. They can all be runned at full 60000RPM on all platforms.
Total length
Flute
length
Tip
diameter
Shank
diameter
Single flute
Up Cut
Multi
Purpose
Bit
HSMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
XN/XL
Milling
VL
Milling
Collets
part no.
MC
MC VL
42444083
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
Bit name
Description
Max
milling
Max
RPM
42443390
BITMUS03-1004-38
3mm
1/8"
Max
60'
42443408
BITMUS03-1506-38
5mm
3/16"
Max
60'
42443416
BITMUS03-2006-38
5mm
3/16"
Max
60'
42443424
BITMUS03-2506-38
5mm 6/16"
Max
60'
42443432
BITMUS03-3006-38
5mm 6/16"
Max
60'
42443440
BITMUS03-3011-38
10mm
3/8"
Max
60'
42449306
BITMDS03-1002-38
1,5mm
1/16"
Max
60'
42449314
BITMDS03-1503-38
2,5mm
3/32"
Max
60'
42449330
BITMDS03-3006-38
5mm
3/16"
Max
60'
42449348
BITMDS03-3011-38
10mm
3/8"
Max
60'
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
Picture
C
XP
Milling Milling
49
Milling Bits
3mm super sharp milling bits
3mm super sharp milling bits are ideal for milling many small details and inside radiuses
in thinner materials. They can all be runned at full 60000RPM on all platforms. The Super
Sharp bits are grinded / polished for an optimized routing surface.
BIT-ADS06- 2008- 50
50
Total length
Flute
length
Tip
diameter
Shank
diameter
Single flute
Down Cut
Acrylic
Bit
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
XN/XL
Milling
VL
Milling
Collets
part no.
HSMU
MC
MC VL
42444083
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
HSMU
MC
HPMU
MC HP
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
MC VL
42444083
42455675
Bit name
Description
Max
milling
Max
RPM
42443614
BITAUS03-1004-30
3mm 1/8"
Max
60'
42443622
BITAUS03-1506-30
5mm 3/16"
Max
60'
42443630
BITAUS03-2006-30
5mm 3/16"
Max
60'
42443648
BITAUS03-2008-30
7mm 9/32"
Max
60'
42443655
BITAUS03-2011-38
10mm 3/8"
Max
60'
42443663
BITAUS03-2506-30
5mm 3/16"
Max
60'
42443671
BITAUS03-2511-38
10mm 3/8"
Max
60'
42443689
BITAUS03-3006-30
5mm 3/16"
Max
60'
42443697
BITAUS03-3011-38
10mm 3/8"
Max
60'
42443705
BITAUS03-3022-50
20mm
13/16"
Max
60'
42449447
BITADS03-1003-38
2,5mm
3/32"
Max
60'
42449454
BITADS03-1504-38
3mm 1/8"
Max
60'
42449462
BITADS03-2006-38
5mm 3/16"
Max
60'
42445981
BITADS03-3006-38
5mm 3/16"
Max
60'
42449470
BITADS03-3011-38
10mm 3/8"
Max
60'
Picture
C
XP
Milling Milling
51
Milling Bits
6mm special purpose milling bits
This is our section for special purpose milling bits for engraving, high speed folding lines
in ACM (aluminum composite materials), outer radius, braiile mounting etc. See chart for
details, milling thickness, max RPM, etc.
engraved acrylic
BIT-EBV0 6-40
52
Angle
Shank
Diameter
V Shape
Engraving
Bit
Bit
HSMU
HPMU
HPMU
HPMU
HPMU
MC Ibag
MC VL
42444067
MC Kavo
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
BIT-EBV06-60
(i-6660)
4mm 5/32
Max
60
42444992
BIT-EBV06-46
4mm 5/32
Max
60
42444380
BIT-EBV06-73
3mm 1/8
Max
60
BIT-EBV06-94
(i-3772)
4mm 5/32
Max
40
BIT-EBV06-120
4mm 5/32
Max
60
BIT-EBV06-60-4F
5,2mm
1/5
Max
60
42444406
02731628
42444067
MC Kavo
MC VL
Max
60
42444067
MC Kavo
MC VL
4mm 5/32
42444398
Picture
42444067
MC Kavo
MC VL
BIT-EBV06-40
(i-6630)
Description
42444067
MC Kavo
MC VL
Max
RPM
Bit name
42444067
MC Kavo
MC VL
Max
milling
42458141
42444067
MC Kavo
42438283
MC HP
42454728
42459719
NEW
HPMU
Collets
part no.
NEW
HPMU
VL
Milling
top seller
HPMU
XN/XL
Milling
53
C
XP
Milling Milling
Milling Bits
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
54
VL
Milling
Collets
part no.
MC Ibag
MC VL
42444067
MC Kavo
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
MC VL
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
42438283
HPMU
MC HP
42454728
HSMU
MC Ibag
HPMU
42459735
BIT-EBV06-120-4F
1,7mm
11/16
Max
60
34092429
BIT-RBO06-04
4mm 5/32
pr pass
Max
60
42452169
Diamond polish
tool
5mm 3/16
pr pass
Max
60
BIT-BRAILLE06
-1503-50
3mm 1/8
Max
20
BITMCS06-6022-64
(i-9152)
This is a compression
bit for smooth edges
on both top and
bottom liner. Acrylic,
Polycarbonate, Sintra
with two sided print
laminate.
22mm 1
Gatorplast, Ultraboard,
Kappa with direct print
or blank
25mm 1
42455477
42444067
MC Kavo
MC VL
Max
60
42444067
MC Kavo
MC VL
3mm 1/8
42459727
Description
42444067
MC Kavo
MC VL
BIT-EBV06-90-4F
Bit name
42444067
MC Kavo
MC VL
Max
RPM
42444067
MC Kavo
MC VL
Max
milling
NEW
HSMU
XN/XL
Milling
NEW
C
XP
Milling Milling
42458786
Max
60
42444067
MC Kavo
42438283
MC HP
42454728
42458794
BITMSD06-6025-64
(i-6432)
Max
50
Max
50
Max
60
Picture
Accessories
Milling accessories
MultiCUT HP head
MultiCUT head
55
Accessories
*VL max RPM = 45
MultiCUT Ibag = 1kW MultiCUT Kavo = 1kW MultiCUT HP = 3kW
HSMU = 1kW MultiCUT VL = 1kW max RPM 45 HPMU = 3kW
Adjustment sleeves
C
XP
Milling Milling
XN/XL
Milling
VL
Milling
MC Ibag
MC VL
MC Kavo
Part no.
Part name
Description
34054510
Adjustment sleeve
MultiCut 20mm
34038406
Adjustment sleeve
MultiCut 28mm
Picture
MC HP
MC Ibag
MC VL
MC Kavo
MC HP
Dummy bits
HPMU
HSMU
MC Ibag
HPMU
MC HP
HSMU
MC Ibag
MC VL
HPMU
42419457
42455667
42448183
MC VL
HPMU
HSMU
MC Ibag
MC Kavo
HPMU
MC HP
HSMU
HPMU
MC VL
MC Kavo
HPMU
42448175
HPMU
MC VL
MC HP
42454736
8mm replacement
chuck
MC HP
42454728
6mm replacement
chuck
HPMU
MC HP
42455675
3mm replacement
chuck
HPMU
MC HP
42455683
1/4 mm
replacement chuck
HPMU
HPMU
HPMU
HPMU
HPMU
HPMU
56
XN/XL
Milling
VL
Milling
Part no.
Part name
HSMU
MC Ibag
MC VL
42444067
6mm replacement
chuck
HSMU
MC Ibag
MC VL
42444083
3mm replacement
chuck
HSMU
MC Ibag
MC VL
42444075
1/4 mm
replacement chuck
Description
Picture
MC Kavo
02721314
6mm replacement
chuck
MC Kavo
02721322
1/4 mm
replacement chuck
MC Ibag
MC VL
MC Kavo
02746188
Chuck maintenance
kit MultiCut (XL
/ XN)
02746196
Chuck maintenance
kit XP
MC HP
HSMU
HPMU
HPMU
42454124
42447383
57
Accessories
Drawing tools
This is our section for drawing tools, including fiber tip pens, liquid pen inserts
and ball point pen refills.
pen plot
58
pen plot
Tool insert/unit
Adapter
Fibretip pen
34011825
14 mm
multifunction unit
34068601
Fibretip tool
N/A
Fibretip pen
34011825
14 mm
multifunction unit
34068601
Fibretip tool
N/A
34022285
14 mm
multifunction unit
34068551
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
34006890
14 mm
multifunction unit
34068544
34063750
Pen
part no.
Pen name
Description
PEN-FP317
42433672
PEN-FP318
42429779
PEN-LP164
43504083
PEN-BP101
44262236
PEN-BP102
Medium line ball point pen refill, blue for highspeed plots on paper, Mylar foil or directly
onto dieboard
44202059
PEN-BP103
Medium line ball point pen refill, red for highspeed plots on paper, Mylar foil or directly
onto dieboard
44202042
PEN-BP104
44202703
PEN-BP201
Bold line ball point pen refill, black for highspeed plots on paper, Mylar foil or directly
onto dieboard
44202687
PEN-BP202
Bold line ball point pen refill, blue for highspeed plots on paper, Mylar foil or directly
onto dieboard
44202729
PEN-BP203
Bold line ball point pen refill, red for highspeed plots on paper, Mylar foil or directly
onto dieboard
44233302
PEN-BP204
Bold line ball point pen refill, green for highspeed plots on paper, Mylar foil or directly
onto dieboard
42403402
Picture
XL
XP XN
C VL XE
59
Crease Wheels
15mm crease wheels
60
Tool insert
HDU
Power Head
Adapter
34050377
n/a
Power Head
34050377
n/a
Power Head
34050377
n/a
Power Head
34050377
n/a
Power Head
34050377
n/a
HDU
34050377
n/a
Power Head
34050377
n/a
Power Head
34050377
n/a
Power Head
34050377
n/a
HDU
32533291
Crease
wheel 15
2 Point
34030858
Crease
wheel 15
3 Point
34030908
Crease
wheel 15
4 Point
32535999
Crease
wheel 15
1 mm
spacing
32555021
Crease
wheel 15
1,25mm
spacing
32551301
Crease
wheel 15
1,4mm
spacing
32551327
Crease
wheel 15
1,8mm
spacing
32555005
Crease
wheel 15
2,2mm
spacing
34012880
Crease tool XE
Power Head
34012880
Crease tool XE
HDU
Crease
wheel 15
1.5 Point
34012880
Crease tool XE
HDU
34057588
34012880
Crease tool XE
HDU
34012880
Crease tool XE
Power Head
Crease
wheel 15
1 Point
34012880
Crease tool XE
HDU
34089540
34012880
Crease tool XE
HDU
Description
34012880
Crease tool XE
HDU
Wheel name
34012880
Crease tool XE
HDU
Wheel
part no.
34012880
Crease tool XE
34050377
n/a
Picture
XL
XP XN
C VL XE
61
Crease Wheels
26mm crease wheels
26mm crease wheels provide excellent performance when creasing thick carton
and thin corrugated boards.
62
Tool insert
HDU
Power Head
Adapter
34050385
n/a
Power Head
34050385
n/a
Power Head
34050385
n/a
Power Head
34050385
n/a
Power Head
34050385
n/a
HDU
34050385
n/a
Power Head
34050385
n/a
Power Head
34050385
n/a
Power Head
34050385
n/a
HDU
32529075
Crease
wheel 26
3 Point
32536542
Crease
wheel 26
4 Point
32522880
Crease
wheel 26
4 Point
32529240
Crease
wheel 26
8 Point
32529091
Crease
wheel 26
10 Point
32529117
Crease
wheel 15
12 Point
32547051
Crease
wheel 15
14 Point
32546640
Crease
wheel 26
0,6mm
spacing
34012906
Crease tool XE
Power Head
34012906
Crease tool XE
HDU
Crease
wheel 26
2 Point
34012906
Crease tool XE
HDU
32524837
34012906
Crease tool XE
HDU
34012906
Crease tool XE
Power Head
Crease
wheel 26
1 Point
34012906
Crease tool XE
HDU
32532129
34012906
Crease tool XE
HDU
Description
34012906
Crease tool XE
HDU
Wheel name
34012906
Crease tool XE
HDU
Wheel
part no.
34012906
Crease tool XE
34050385
n/a
Picture
XL
XP XN
C VL XE
63
Crease Wheels
XL
XP XN
C VL XE
Tool insert
HDU
Power Head
34050385
n/a
Power Head
Wheel
part no.
Wheel name
Description
32537706
Crease
wheel 26
Triple wall
32524811
Crease
wheel 26
Crush
34012906
Crease tool XE
HDU
64
Adapter
34012906
Crease tool XE
34050385
n/a
Picture
The 60mm crease tool for corrugated board offers improved crease quality over
smaller wheel diameters. The increased frontal area (see sketch) allows going
deeper into the board without cracking the liner, which is especially important for
material with high recycle content.
The tool comes with three different crease wheels; a 4-point wheel suitable for Eand other microflutes, a 6-point wheel suitable for B- and C-flute, and a U-shaped
wheel for double wall corrugated.
Due to the large diameter the wheel must be attached to the tool after it has been
mounted in the toolhead. The wheel easily snaps in place without any auxiliary tool
requirements.
65
Crease Wheels
XL
XN
VL
66
Tool insert
Adapter
Wheel
part no.
Crease tool 60
34095505
n/a
Crease tool 60
34095505
Crease tool 60
34095505
Wheel name
Description
34095430
Crease wheel 60
6 Point
n/a
34095513
Crease wheel 60
4 Point
n/a
34095539
Crease wheel 60
U-shape
Picture
67
Crease Wheels
150mm crease wheels
XP XL
C XN XE
Tool insert
Adapter
Wheel
part no.
n/a
Wheel name
Description
34010306
n/a
34023234
n/a
34068734
n/a
34007096
n/a
34007906
HPU
Power Head
HPU
Power Head
HPU
Power Head
HPU
Power Head
HPU
Power Head
Picture
Tool insert
Adapter
n/a
HPU
Wheel
part no.
Wheel name
Description
42442764
42442772
34089904
Picture
Power Head
Static knife double edge
n/a
HPU
34089904
Power Head
34057356
42444711
34057356
42444729
RM Knife tool
n/a
42459503
NEW
RM Knife tool
n/a
42459511
NEW
68
69
Esko
Kortrijksesteenweg 1095
9051 Gent
Belgium
Tel. +32 9 216 92 11
info.eur@esko.com
Esko
Esko Japan
Esko
Esko
Floor 1, #2 Building,
Miamisburg, OH 45342USA
Avenue 1
1 Nishishinjuku 6-Chome,
Comrcio de Produtos
Tel.: +1 937-454-1721
Shinjuku-kuTokyo, Japan
Tecnolgicos Ltda
Fax: +1 937-454-1522
South Tower
163-1307
Singapore 486018
Tel.: +81 3 59 09 76 31
info.china@esko.com
Aprigio Gonzaga, n 78 11
Republic of Singapore
Fax: +81 3 59 09 76 41
andarConjunto 113/11404304-010
So Paulo Brazil
Copyright 2013 Esko. All rights reserved. All specifications are subject to alteration.