Professional Documents
Culture Documents
CT Final
CT Final
Fig.7
Fig.8
tion.
Since relay trips on unbalance
which is a common phenomenon,
this method is not used.
V) 2: CT connection (One at
trafo earthing end & one
in switchboard N):Two CTs are mounted as shown in
(Fig.11). One CT at trafo neutral end
& another in switchboard neutral.
Fig.9
Fig.10
Case-2:
If transformer earthing is as per
(Fig 16), only four (4) CTs are
required for reliable operation. In
this case, Unbalance current flows
back through CT (T4) in the
Fig.11
used.
Case-1:
If earthing of the transformer is as
shown in (Fig 15), five (5) CTs are
required for reliable operation. CT
on neutral within switchboard (T4)
is required to avoid nuisance
tripping during unbalance con-
Fig.12
Conclusion:-
LOAD
If
Fig.13
LOAD
If
If
Fig.14
Fig.15
Fig.16