Professional Documents
Culture Documents
Mechanical Grooved
Products Catalogue
Making Connections
Building Solutions
TABLE OF CONTENTS
Table of
Contents
Why Grooved? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Why GRINNELL? . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Grooved Couplings . . . . . . . . . . 17 - 38
Outlet Fittings . . . . . . . . . . . . . . 83 - 90
Outlet Fittings Table of Contents . . . . . . . . . . . . . . . . 84
Figure 730 Mechanical Tees Threaded . . . . . . . 85 - 87
Figure 730 Mechanical Tees Grooved. . . . . . . . 88 - 90
Flange Adapters . . . . . . . . . . . . 39 - 48
Flange Adapters Table of Contents . . . . . . . . . . . . . . 40
Grooved Fittings . . . . . . . . . . . . 49 - 82
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
www.grinnell.com
TABLE OF CONTENTS
Figure 70607 Groove Ended Metering Station . . . . . 118
Figure Venturi, Flow Meter
Butt Weld with Grooved Ends. . . . . . . . . . . . . . . . 119
Table of
Contents
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
TABLE OF CONTENTS
Table of
Contents
Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
www.grinnell.com
GENERAL
DATA
GENERAL DATA
General
Data
GRINNELL
MECHANICAL
PRODUCTS
GRINNELL Mechanical
Products, a premium
brand of Tyco International, represents a
complete suite of mechanical building
construction solutions for commercial, industrial,
institutional, mining, and governmental
applications. Available products offer
contractors, engineers, and distributors faster,
more cost-effective tools for joining pipe over
traditional welding methods. These products
include Grooved Couplings and Fittings, Butterfly
Valves, High-Pressure Ball Valves, Strainers,
Circuit Balancing Valves, HDPE Systems, Stainless
Steel Systems, and comprehensive, competitively priced
engineering and planning support services. In addition to
delivering innovative Grooved Piping Solutions, GRINNELL Products
are backed by an industry-leading, 10-year Limited Warranty.
Regional Headquarters
Corporate Headquarters
Research and Development
MAKING CONNECTIONS
Global Headquarters
Lansdale, Pennsylvania, USA
Research and Development
Cranston, Rhode Island, USA
REGIONAL HEADQUARTERS
North Asia
Shanghai, China
South Asia
Singapore
Australia
Sunshine, Victoria
Middle East
Dubai, United Arab Emirates
Europe
Enschede, The Netherlands
Paris, France
Manchester, U.K.
Rodgau, Germany
Budapest, Hungary
Milan, Italy
Wien, Austria
Mechelen, Belgium
Madrid, Spain
Lrenskog, Norway
Lammhult, Sweden
South America, Central America,
and Caribbean
Pompano, Florida, USA
Mexico
Tlalnepantla, Mexico
The products and specications published herein are for general evaluation and reference purposes only and are subject to change by GRINNELL Mechanical Products without
notice. For the most up-to-date information, visit www.grinnell.com. The information provided in this catalogue should not be relied on as a substitute for professional advice
concerning specic applications. ALTHOUGH GRINNELL MECHANICAL PRODUCTS ENDEAVORS TO ENSURE ACCURACY, ALL INFORMATION HEREIN IS PROVIDED ON
AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. Without limiting the foregoing, GRINNELL Mechanical Products does not warrant the
accuracy, adequacy, or completeness of any such information. All users of the information provided herein assume the risk of use or reliance on such information and GRINNELL
Mechanical Products shall not be liable for any damages for such use including, but not limited to, indirect, special, incidental, or consequential damages. Terms and Conditions
of sale can be found on www.grinnell.com.
www.grinnell.com
GENERAL DATA
General
Data
B UILDING S O L U T I O NS
43 Stocking Warehouses
24 Manufacturing Locations
4,100 Employees in
34 Countries
GENERAL DATA
General
Data
Why Grooved?
Reduced Installation
Time and Cost
Pipe grooving reduces installation cost by up to
30%, allowing contractors to minimise labour costs
and remain within budget. Methods such as welding
and soldering are labour intensive and can be very
expensive in high-cost regions.
Compatibility With
Hazardous Environments
Grooved Pipe does not require welding, threading, or
cutting, eliminating cutting oils, fumes, and ames.
It is the ideal method for joining pipe in enclosed,
ammable, or hazardous sites like tunnels and mines.
And it doesn't require burn or hot-works permits.
Connection Consistency
When construction calls for robust piping
applications, GRINNELL Grooved Products maintain
high pressures at each connection without sacricing
quality and reliability. GRINNELL Grooved Systems
allow for quick assembly that is simple and consistent
from one worker to the next. Projects are completed
on time, and crews can readily move on to their
next installations.
No Special Tools
Grooved Products are assembled onto a standard
groove. No special tools or additional training to
complete the job are required.
www.grinnell.com
GENERAL DATA
Why GRINNELL?
General
Data
Green Solutions
All GRINNELL Mechanical Products cast are
manufactured with 90% recycled metal that would
otherwise contribute to our nations solid waste stream.
All waste paper, used cardboard, scrap wood, and
EPDM waste from our plants is recycled.
Industry Pioneer
GRINNELL Mechanical Products has been in the pipejoining business for over 160 years. We have strategic
stocking locations throughout the world to serve our
customers. We have the best channel partners who are
focused, as we are, on innovation and growth.
Great Service
At GRINNELL Mechanical Services, the customer
always comes rst. We pride ourselves on providing
knowledgeable sales support, timely technical service,
and quality customer care to all global customers.
Global Presence
You can nd our products in buildings and installations
all over the world. We provide global solutions that
exibly address the challenges our customers face,
including design in one country for construction in
another.
GENERAL DATA
General
Data
DEPENDABILITY
The coupling housings are designed to engage into the grooves
and provide a secure joint. The pipe ends are sealed by a pressure
responsive gasket which is encapsulated by the ductile iron housing.
VERSATILITY
GRINNELL flexible couplings will accommodate misalignments. The
maximum deflection information per coupling can be found in this
catalogue.
SUPERIOR QUALITY
GRINNELL Piping Products are manufactured according to the
ISO 9001:2008 Quality Assurance standard.
CLEAN
Unlike with welding, GRINNELL Piping Products do not lead to the
release of hazardous fumes or to the possible introduction of foreign
materials in the pipeline.
10
www.grinnell.com
GENERAL DATA
Agency Listings and Approvals
General
Data
Our products are associated with the following agencies, associations and laboratories.
contact GRINNELL for specific listings, approvals and certifications.
CRN
Canadian Registration Number
CSTB
French Scientic and
Technical Centre for Building
DNV
Det Norske Veritas
DVGW
Deutscher Verein des
Gas-und Wasserfaches e.V.
NSF INTERNATIONAL
The Public Health and
Safety Company
AMERICAN BUREAU
OF SHIPPING (ABS)
FACTORY MUTUAL
ENGINEERING CORP. (FM)
Approved for Fire Protection Services
FEDERAL AVIATION
ADMINISTRATION (FAA)
HVAC, Plumbing and Fire Protection
FEDERAL HOUSING
ADMINISTRATION (FHA)
GERMANISCHER LLOYD
BUILDING CONFIDENCE
Empowered by Achilles
INTERNATIONAL ASSOCIATION
OF PLUMBING AND
MECHANICAL OFFICIALS (IAPMO)
ICC-ES
National Evaluation Service, Inc.
CERTIFICATION TO EUROPEAN
PRESSURE EQUIPMENT DIRECTIVE
LLOYDS
Lloyds Register of Shipping
97/23/EC
CNBOP
Centrum Naukowo-Badawcze
Ochrony Przeciwpozarowe
CNPP APSAD
National Centre for
Prevention and Protection (FR)
COAST GUARD
Approved each vessel individually
RINA
Registro Italiano Navale
SOUTHERN BUILDING CODE CONGRESS
INTERNATIONAL (SBCCI)
Standard Plumbing
UNDERWRITERS
LABORATORIES, INC. (UL)
Listed for Fire
Protection Services
GENERAL SERVICES
ADMINISTRATION (GSA)
15000 Series
ASTM
American Society of Testing
Materials.
F-1476 Couplings,
F-1548 Fittings
UNDERWRITERS
LABORATORIES
OF CANADA (ULC)
Listed for Fire Protection Services
UNIFORM PLUMBING
CODE (UPC)
VERBAND DER
SACHVERSICHERE E.V. (VDS)
Approved for Fire Protective Service
VETERANS AFFAIRS (VA)
15000 Series
WATERMARK
Standards Australia Limited
WRAS
Water Regulations
Advisory Scheme (UK)
WSD
Pending Approved for Potable
Water Service (HK)
11
GENERAL DATA
General
Data
12
Casting
Rubber Injection
Paint Process
Tooling
We manufacture our
gaskets using rubber
injection presses
and tooling to mould
different types of rubber
compounds specically
designed for the many
applications required by
our customers. Physical
tests are performed on
nished gasket samples
to verify compliance with
specications including
ASTM D 2000.
Using a computer
controlled process, each
product is spray-washed,
dried, preheated, dipped,
and fully cured prior to
assembly or packaging.
All integral parts are
inspected to maintain
consistent paint coverage
and surface condition
www.grinnell.com
GENERAL DATA
ISO 9001:2008 Certified
General
Data
T A Hunter
for and on behalf of LPCB
Certificate No: 673
Issue Number: 03
Date of Issue:
03 December 2010
LPCB is part of BRE Global Limited, Watford, WD25 9XX T: +44 (0)1923 664100 F: +44 (0)1923 664910 W: www.redbooklive.com
This certificate remains the property of BRE Global Ltd and is issued subject to terms and conditions. It is maintained and held in force
through at least annual review and verification. To check the validity of this certificate, please visit www.redbooklive.com or contact us.
13
GENERAL DATA
General
Data
Typical Applications
14
HVAC
Reverse Osmosis
Fire Protection
Desalination
Plumbing
Marine
Municipal
Gas
Food Processing
Chemical
Oil
Agriculture
Air
www.grinnell.com
GENERAL DATA
How to Build
GRINNELL Part Numbers
General
Data
Figure No.
774ME00891
Pipe Size
Nominal
mm
Inches
15
1
2
20
3
4
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
108.0mm
100
4
125
133.0mm
125
139.7mm
125
5
150
159.0mm
150
165.1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
Digits 06-07-08-09
Sizes Codes for
Outlet Fittings
Sizes
O.D.
& Reducers
Codes for
mm
Couplings
Inches
Example: 4 x 2 4220 & Fittings
(Biggest Size First)
21.3
05
n/a
0.840
26.9
07
n/a
1.050
33.7
10
0034
1.315
42.4
12
0042
1.660
48.3
15
0048
1.900
60.3
20
0060
2.375
73.0
25
0073
2.875
76.1
26
0076
3.000
88.9
30
0089
3.500
108.0
41
0108
4.252
114.3
42
0114
4.500
133.0
51
0133
5.236
139.7
52
0139
5.500
141.3
53
0141
5.563
159.0
61
0159
6.260
165.1
62
0165
6.500
168.3
63
0168
6.625
219.1
80
0219
8.625
273.0
11
0273
10.750
323.9
13
0324
12.750
355.6
14
0355
14.000
406.4
16
0406
16.000
457.2
18
0457
18.000
508.0
21
0508
20.000
609.6
24
0610
24.000
Gasket
Size
Finish
Internal
Code
Digits 01, 02, & 03: Figure number
Digit 04: Internal Code
Digit 05: Gasket: E for C-style EPDM (Grade E)
T for Tri-Seal EPDM (Grade E)
B for C-style Nitrile/Buna-N (Grade T)
Outlet Fitting
D for C-style EPDM
DIGIT 05
T = BSP thread
(Grade EN, suitable for potable
N = NPT thread
water applications)
G = Grooved
V for C-style Fluoro Elastomer (Grade O)
S for C-style Silicone (Grade L)
Digits 06 thru 09: Size
Digit 10: Finish:
774ME00891:
Fig. Number
Internal Code
Gasket
Size
Finish
730AG63261:
Fig. Number
Internal Code
Outlet
Size
Finish
15
GENERAL DATA
General
Data
GRINNELL Website
www.grinnell.com
To learn more about GRINNELL Mechanical
Products, visit www.grinnell.com. Our Website
provides a wide variety of tools and information at
your fingertips.
Please select the EMEA region on the map
to see region specific information.
Browse These Website Features
Resources Tab
Tech Data
16
www.grinnell.com
GROOVED
COUPLINGS
17
GROOVED COUPLINGS
Grooved Couplings Table of Contents
GRINNELL Couplings are designed for grooved end pipe
and are available in nominal sizes of 25 to 600mm
(1" to 24") including BS, ISO, and JIS outside diameters.
Grooved
Couplings
Figure 772
Rigid Couplings
Pages 20 - 21
Figure 740
Rapid Installation Pivot-Bolt
(GRIP) Rigid Couplings
Page 22
Figure 774
Rigid Couplings
Page 23
Figure 909
Plain End Couplings
Page 30
Figure 780
Grooved Snap Couplings
Page 31
Figure XH-70EP
Extra Heavy Rigid Couplings
With End Protection (EP) Gasket
Pages 32 & 171
Figure 705
Flexible Couplings
Page 24
Figure 716
Flexible Reducing Couplings
Page 33
Figure 770
High Pressure Rigid Couplings
Page 25
Figure 707
Heavy Duty
Flexible Couplings
Pages 26 - 27
Figure 707L
Large Diameter
Couplings
Page 28
Figure 7707 N
Large Diameter
Flexible Couplings
Page 29
Figure 702
Mechanical Outlet Couplings
Pages 34 - 35
Figure 7706-T
Transition Couplings
Page 36
Electrical Continuity
Page 37
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
18
www.grinnell.com
GROOVED COUPLINGS
Grooved
Couplings
Additional Features:
U->`>``}i`iii
special tools.
U >Vi`Li`Li9i>
Limited Warranty, except for G-MINE
which is 6 months. Review terms and
conditions of sale on www.grinnell.com.
MATERIAL SPECIFICATIONS
Bolt/Nut Specifications
UMetric: Carbon steel oval neck track head bolts
(Gold colour coded) are heat treated and conform
to the physical properties of ASTM F 568M with a
minimum tensile strength of 760 MPa. Carbon Steel
heavy hex nuts conform to the physical properties of
ASTM A 563 M Class 9. Bolts and nuts are zincelectroplated conforming to ASTM B 633.
UANSI: Carbon steel oval neck bolts and nuts are
heat-treated and conform to the physical properties
of ASTM A 183 Grade 2 and SAE J429 Grade
5 with a minimum tensile strength of 7584 Bar
(110,000 psi). Carbon Steel heavy hex nuts conform
to the physical properties of ASTM A 183 Grade 2
and SAE J995 Grade 5. Bolts and nuts are zincelectroplated conforming to ASTM B 633.
U->iiiL>`>i>>>Li
request.
Coatings
U,i`q i>`>,>`>`
U7iq i>`>,>
Ui`]<V>>i`>
19
GROOVED COUPLINGS
Figure 772 Rigid Couplings
(Page 1 of 2)
B
B
B
Max.*
Dimensions
Coupling Bolts
Max.
Max.
Approx.
End
Weight
Grade E
Nominal
O.D. Pressure End Load
A
B
C
Size
Gap
Grade E
Bar
kN
Kg.
Tri-Seal
mm
mm
mm
mm
mm Qty.
mm
mm
Gasket
psi
Lbs.
Lbs.
Gasket
Inches
Inches
Inches
Inches
Inches
Inches
Inches
32
42.4
51.7
7.22
1.5
69.9
111.3
46.0
M10 x 57
0.5
772ME0042 772MT0042
2
3
1 1 4
1.660
750
1,623
0.06
2.75
4.38
1.81
8 x 2 1 4
1.0
40
48.3
51.7
9.46
2.0
76.2
117.3
46.0
M10 x 57
0.5
772ME0048 772MT0048
2
3
1 1 2
1.900
750
2,127
0.08
3.00
4.62
1.81
8 x 2 1 4
1.0
50
60.3
51.7
14.78
4.8
86.6
145.0
48
M12 x 76
1.3
772ME0060 772MT0060
2
1
2
2.375
750
3,323
0.188
3.41
5.70
1.9
2 x 3
2.9
65
73.0
51.7
21.66
4.8
100.8
160.0
48
M12 x 76
1.5
772ME0073 772MT0073
2
1
2.875
750
4,869
0.188
3.97
6.30
1.9
2 x 3
3.3
2 1 2
65
76.1
51.7
23.58
4.8
104.1
163.0
48
M12 x 76
1.6
772ME0076 772MT0076
2
76,1mm 3.000
750
5,301
0.188
4.10
6.43
1.9
3.6
80
88.9
51.7
32.10
4.8
116.8
176.0
48
M12 x 76
1.7
772ME0089 772MT0089
2
1
3
3.500
750
7,216
0.188
4.60
6.93
1.9
2 x 3
3.7
100
114.3
51.7
53.06
4.8
147.6
205.0
48
M12 x 76
2.0
772ME0114 772MT0114
2
1
2 x 3
4.3
4
4.500
750
11,928
0.188
5.81
8.07
1.9
125
139.7
51.7
79.26
4.8
178.3
246.9
52.3
M16 x 83
3.4
772ME0139 772MT0139
2
139,7mm 5.500
750
17,819
0.19
7.02
9.72
2.06
7.5
125
141.3
51.7
81.09
4.8
180.1
246.6
51.8
M16 x 83
3.4
772ME0141 772MT0141
2
5
5
5.563
750
18,229
0.19
7.09
9.71
2.04
8 x 3 1 4
7.5
150
165.1
48.3
103.18
4.8
205.5
267.5
54.1
M16 x 83
3.4
772ME0165 772MT0165
2
165,1mm 6.500
700
23,228
0.19
8.09
10.53
2.13
7.6
150
168.3
48.3
107.34
4.8
205.5
267.5
54.1
M16 x 83
3.4
772ME0168 772MT0168
2
5
8 x 3 1 4
7.6
6
6.625
700
24,130
0.19
8.09
10.53
2.13
200
219.1
41.4
155.94
4.8
268.2
344.4
66.5
M20 x 121
8.2
772ME0219 772MT0219
2
3
8
8.625
600
35,056
0.19
10.56 13.56
2.62
4 x 4 3 4
18.0
20
Pipe Size
www.grinnell.com
GROOVED COUPLINGS
Figure 772 Rigid Couplings
(Page 2 of 2)
Tech Data Sheet: G141
Grooved
Couplings
B
B
B
Grade E
Tri-Seal
Gasket
772ME0273 772MT0273
772ME0324 772MT0324
772AE0355
772AE0355
772AE0406
772AE0406
772AE0457
772AE0457
772AE0508
772AE0508
772AE0610
772AE0610
Pipe Size
Nominal
mm
Inches
250
10
300
12
350
14
400
16
450
18
500
20
600
24
Max.*
Dimensions
Coupling Bolts
Max.
Max.
Approx.
End
Weight
O.D. Pressure End Load
A
B
C
Size
Gap
Bar
kN
Kg.
mm
mm
mm
mm Qty.
mm
mm
psi
Lbs.
Lbs.
Inches
Inches
Inches
Inches
Inches
Inches
273.0
34.5
201.87
3.3
326.1
416.8
66.5
11.2
2
10.750
500
45,381
0.13
12.84
16.41
2.62
1 x 6 1 2
24.6
323.9
27.6
227.17
3.3
391.4
478.5
66.5
19.1
2
12.750
400
51,071
0.13
15.41
18.84
2.62
1 x 6 1 2
42.0
355.6
20.7
205.43
3.3
423.7
517.6
74.4
21.7
2
14.000
300
46,181
0.13
16.68 20.38
2.93
1 x 5 1 2
48.0
406.4
20.7
268.31
3.3
469.9
575.1
74.4
23.6
3
52.1
16.000
300
60,319
0.13
18.50 22.64
2.93
1 x 5 1 2
457.2
20.7
339.58
6.4
541.3
638.0
77.7
30.8
3
18.000
300
76,341
0.25
21.31
25.12
3.06
1 x 5 1 2
68.0
508.0
20.7
419.23
6.4
596.9
708.2
77.7
40.4
4
20.000
300
94,248
0.25
23.50 27.88
3.06
1 1 8 x 5 3 4 89.0
609.6
17.2
503.08
6.4
701.8
812.8
81.0
43.5
4
24.000
250
113,097
0.25
27.63 32.00
3.19
1 1 8 x 5 3 4 96.0
21
GROOVED COUPLINGS
Figure 740 Rapid Installation Pivot-Bolt
(GRIP) Rigid Couplings
Tech Data Sheet: G144
Grooved
Couplings
Certified to
NSF/ANSI 61
A
COUPLING
BOLT
PIVOT
BOLT
Pipe Size
Part Number Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
65
76.1mm
80
3
100
4
125
139.7mm
125
5
150
165.1mm
150
6
200
8
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
740AE0060*
740AE0073*
740ME0076*
740AE0089*
740AE0114*
740ME0139*
740AE0141*
740ME0165*
740AE0168*
740AE0219*
Max.
Max. Max. End
Pressures End Load
Gap
Bar
kN
mm
psi
Lbs.
Inches
51.7
750
51.7
750
14.78
3,323
21.66
4,869
51.7
750
51.7
750
32.10
7,216
53.06
11,928
51.7
750
81.09
18,229
48.2
700
41.4
600
107.34
24,130
155.94
35,056
8.3
0.33
8.3
0.33
8.3
0.33
8.3
0.33
9.8
0.39
9.8
0.39
9.8
0.39
9.8
0.39
9.8
0.39
11.3
0.45
Dimensions
A
mm
Inches
B
mm
Inches
C
mm
Inches
84.5
3.33
97.3
3.83
100.5
3.96
112.8
4.44
145.6
5.73
169.7
6.68
172.4
6.79
198.4
7.81
201.7
7.94
256.3
10.09
147.8
5.82
160.3
6.31
163.5
6.44
175.8
6.92
205.7
8.10
244.9
9.64
246.6
9.71
270.8
10.66
274.1
10.79
326.1
12.84
53.8
2.12
53.8
2.12
54.1
2.13
54.4
2.14
56.4
2.22
58.7
2.31
58.7
2.31
58.9
2.32
58.9
2.32
71.9
2.83
Pivot Bolts
Size
Inches
Dia x Lg.
Coupling
Bolts Size
Inches
Dia x Lg.
2 x 3- 3 4
2 x 3- 5 8
2 x 3- 3 4
2 x 3- 5 8
2 x 3- 3 4
2 x 3- 5 8
2 x 3- 3 4
2 x 3- 5 8
2 x 3- 3 4
2 x 3- 5 8
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
8 x 4- 1 2
Approx.
Weight
kg
Lbs.
1.5
3.3
1.6
3.5
1.6
3.6
1.7
3.7
2.3
5.0
3.5
7.7
3.5
7.7
3.9
8.6
3.9
8.6
5.8
12.8
22
www.grinnell.com
GROOVED COUPLINGS
Figure 774 Rigid Couplings
Tech Data Sheet: G135
The GRINNELL Figure 774 Grooved Rigid Coupling provides a rigid joint
by firmly gripping along the full circumference of the pipe grooves. Figure
774 Grooved Rigid Couplings are a proven dependable method of joining
pipe and are an economical alternative to welding, threading, or using
flanges. It is capable of pressures up to 34.5 Bar (500 psi) depending on
pipe size and wall thickness when used in fire protection services.
B
Grooved
Couplings
Part Number
Grade E
Gasket
Grade E
Tri-Seal
Gasket
774ME0034
774MT0034
774ME0042
774MT0042
774ME0048
774MT0048
774ME0060
774MT0060
774ME0073
774MT0073
774ME0076
774MT0076
774ME0089
774MT0089
774ME0114
774MT0114
774ME0139
774MT0139
774ME0141
774MT0141
774ME0165
774MT0165
774ME0168
774MT0168
774ME0219
774MT0219
774ME0273
774MT0273
774ME0324
774MT0324
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
Max.
Pressures
Bar
psi
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
4
125
139.7mm
125
5
150
165.1mm
150
6
200
8
250
10
300
12
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
27.5
400
16.0
233
12.0
175
Dimensions
Max.
End
Load
kN
Lbs.
Max.*
End Gap
mm
Inches
A
mm
Inches
B
mm
Inches
C
mm
Inches
2.11
475
3.37
757
4.41
992
6.90
1,551
10.11
2,272
11.01
2,474
14.98
3,367
21.22
4,771
31.71
7,127
32.43
7,290
44.28
9,955
46.00
10,341
77.97
17,528
70.7
15,883
99.4
22,343
1.5
0.06
1.5
0.06
1.5
0.06
1.5
0.06
1.5
0.06
1.5
0.06
1.5
0.06
1.5
0.06
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0.125
6.4
0.25
6.4
0.25
41
1.63
68
2.66
74
2.90
86
3.38
99
3.88
102
4.00
114
4.50
145
5.70
173
6.80
174
6.86
198
7.80
215
8.47
260
10.25
318
12.50
368
14.50
100
3.92
112
4.40
118
4.66
132
5.20
143
5.64
147
5.78
161
6.33
191
7.50
222
8.75
224
8.82
248
9.75
251
9.88
325
12.78
419
16.50
470
18.50
42
1.65
42
1.64
42
1.66
43
1.70
44
1.75
44
1.75
44
1.75
46
1.83
49
1.91
49
1.91
49
1.91
49
1.91
61
2.40
65
2.56
65
2.56
Coupling
Bolts
Size **
(Qty 2)
mm
Inches
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M12 x 76
M12 x 76
1
2 x 3
M12 x 76
M12 x 76
1
2 x 3
M16 x 83
5
8 x 3 1 4
M20 x 121
3
4 x 4 3 4
M20 x 121
3
4 x 4 3 4
Approx.
Weight
kg
Lbs.
0.55
1.2
0.59
1.3
0.68
1.5
0.82
1.8
0.91
2.0
0.91
2.0
1.50
3.3
1.50
3.3
2.41
5.3
2.41
5.3
2.59
5.7
2.69
5.9
5.32
11.7
8.86
19.5
10.00
22.0
The 774 Coupling will be available from Sept. 2013 For information on alternative product, contact a GRINNELL Sales Representative
= 1 for red paint finish, 2 for hot dipped galvanised finish, or 5 for painted white RAL 9010 coating
* Maximum available gap between pipe ends. Minimum gap = 0.
Maximum Pressure and End Load are total from all loads based on on standard weight steel pipe. Pressure ratings and end loads may
differ for other pipe materials and/or wall thicknesses. Contact a GRINNELL Sales Representative for details.
Max End Gap is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
U ">>>Li -Li
** Gold colour coded metric bolt sizes for 25mm - 300mm couplings are available upon request.
The Fig. 774 Standard Weight Rigid Coupling does not provide compensation for pipe system expansion and/or contraction associated with
pipe system temperature changes.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 19 for coupling specifications and pages 234 - 245 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
23
GROOVED COUPLINGS
Figure 705 Flexible Couplings
Tech Data Sheet: G110
The GRINNELL Figure 705 Flexible Coupling allows for angular and linear
deflection, thermal expansion and contraction, and misalignments of pipe. It is
capable of pressures up to 34.5 Bar (500 psi), depending on pipe size and wall
thickness. Suitable for use in a variety of applications, the GRINNELL Figure 705
Coupling provides a dependable method of joining pipe.
Grooved
Couplings
Part Number
Grade E
Gasket
Grade E
Tri-Seal
Gasket
705ME0034 705MT0034
705ME0042 705MT0042
705ME0048 705MT0048
705ME0060 705MT0060
705ME0073 705MT0073
705ME0076 705MT0076
705ME0089 705MT0089
705ME0108 705MT0108
705ME0114 705MT0114
705ME0133 705MT0133
705ME0139 705MT0139
705ME0141 705MT0141
705ME0159 705MT0159
705ME0165 705MT0165
705ME0168 705MT0168
705ME0219 705MT0219
705ME0273 705MT0273
705ME0324 705MT0324
Pipe Size
Nominal
DN
In.
O.D.
mm
In.
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
108.0mm
100
4
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
108.0
4.252
114.3
4.500
125
133.0
133.0mm 5.236
125
139.7
139.7mm 5.500
125
141.3
5.563
150
159.0
159.0mm 6.260
150
165.1
165.1mm 6.500
150
168.3
6.625
200
219.1
8.625
250
10
300
12
273.0
10.750
323.9
12.750
Max.
Pressure
Bar
psi
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
31.0
Max.
End
Load
kN
Lbs.
1.86
410
4.81
1,082
6.30
1,418
9.85
2,215
14.43
3,246
15.72
3,534
21.39
4,811
31.55
7,093
35.35
7,952
43.33
6.4
450
31.0
9,741
0.25
47.56
6.4
450
31.0
10,691
0.25
48.63
6.4
450
31.0
10,938
0.25
61.41
6.4
450
31.0
13,806
0.25
66.36
6.4
450
31.0
14,932
0.25
68.97
6.4
450
31.0
15,512
0.25
116.89
6.4
450
24.1
350
24.1
350
26,292
0.25
141.31
31,767
198.78
44,687
6.4
0.25
6.4
0.25
5 30'
4 19'
3 46'
3 1'
2 29'
2 23'
2 3'
3 22'
3 11'
2 44'
2 36'
2 35'
2 35'
2 12'
2 10'
1 40'
1 20'
1 7'
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M12 x 89
1
2 x 3
0.6
1.3
0.7
1.5
0.7
1.6
0.8
1.7
0.9
2.0
1.4
3.0
1.4
3.1
1.9
4.2
1.8
4.0
3.3
M12 x 76
M12 x 89
1
2 x 3
M12 x 76
46.7
167.0 241.0
52
M16 x 83
0.56
6.57
9.49
2.05
7.2
45.5
173.0 247.7
52.3
M16 x 83
3.3
0.55
6.81
9.75
2.06
7.2
45.0
174.8 247.7
52.3
M16 x 83
3.2
0.54
6.88
2.06
40.0
9.75
0.48
7.56
38.3
8 x 3 1 4
7.1
M16 x 83
3.4
10.31 2.06
0.46
7.75
37.5
0.45
7.4
M16 x 83
3.2
10.69 2.06
7.1
M16 x 83
3.2
8 x 3 1 4
7.1
6.6
4 x 4 3 4
14.5
23.3
0.28
19.2
0.23
1 x 6 1 2
1 x 6 1 2
12.7
28.0
16.6
36.5
322.3
12.69
379.5
14.94
416.1
16.38
479.6
18.88
66.8
2.63
66.8
2.63
= 1 for red paint finish, 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating
* Maximum available gap between pipe ends. Minimum gap = 0.
Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ
for other pipe materials and/or wall thickness. Contact GRINNELL Products for details.
Max end gap and deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 19 for coupling specifications and pages 234 - 245 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
24
www.grinnell.com
GROOVED COUPLINGS
Figure 770 High Pressure Rigid Couplings
Tech Data Sheet: G138
The Figure 770 Rigid Coupling provides a rigid joint by firmly gripping
along the circumference of the pipe grooves. This coupling offers a
dependable method for joining pipe and is an economical alternative
to welding, threading, or using flanges. It is capable of pressures up to
68.9 Bar (1000 psi) depending on pipe size and wall thickness.
Grooved
Couplings
Additional Features:
Uc}}vi}iVVviiVi
provides a strong rigid connection.
U/}i>`}i`i}vi>>
U >Vi`Li`Li9i>i`
Warranty.
Pipe Size
Part
Number
770AE0060
770AE0073
770AE0089
770AE0114
770AE0168
770AE0219
770AE0273
770AE0324
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
200
8
250
10
300
12
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Max.
Pressures
Bar
psi
Max.
End Load
kN
Lbs.
Max.*
End Gap
mm
Inches
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
55.2
800
55.2
800
55.2
800
19.71
4,430
28.88
6,492
42.79
9,621
70.74
15,904
153.33
34,472
207.90
46,741
322.97
72,610
454.32
102,141
3.6
0.14
3.6
0.14
3.6
0.14
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
Dimensions - mm Inches
A
89.7
3.53
103.1
4.06
121.4
4.78
152.7
6.01
216.2
8.51
277.6
10.93
341.9
13.46
394.2
15.52
145.3
5.72
152.4
6.00
171.7
6.76
215.9
8.50
285.8
11.25
349.3
13.75
406.4
16.00
457.2
18.00
47.8
1.88
47.8
1.88
47.8
1.88
53.3
2.10
53.3
2.10
66.0
2.60
66.0
2.60
66.0
2.60
Coupling Bolts
Qty.
2
2
2
2
2
2
2
2
Size
mm
Inches
M16 x 70
5
8 x 2 3 4
M16 x 89
5
8 x 3 1 2
M16 x 89
5
8 x 3 1 2
M20 x 108
3
4 x 4 1 4
M22 x 140
7
8 x 5 1 2
1 x 5 1 2
1 x 6 1 2
1 x 6 1 2
Approx.
Weight
Kg.
Lbs.
2.0
4.3
2.3
5.0
2.4
5.3
3.5
7.7
7.3
16.2
10.9
24.0
14.5
32.0
18.1
40.0
25
GROOVED COUPLINGS
Figure 707 Heavy Duty Flexible Couplings
(Page 1 of 2)
Tech Data Sheet: G130
The GRINNELL Figure 707 Heavy Duty Flexible Coupling allows for
angular and linear deflection, thermal expansion and contraction,
and misalignments of the pipe. Flexible couplings can act as an
expansion joint, allowing linear and angular movement of the
pipes when properly installed. This coupling is capable of pressures
up to 68.9 Bar (1,000 psi), depending on pipe size and wall
thickness. Suitable for use in a variety of applications, the Figure
707 Coupling provides a dependable method of joining pipe.
Grooved
Couplings
B
B
B
Pipe Size
707ME0042
707AE0048
707AE0060
707AE0073
707AE0076
707AE0089
707AE0114
707AE0139
707AE0141
707AE0165
707AE0168
26
Nominal
mm
Inches
707AE0034
Part
Number
Max.
Max.
O.D. Pressure End Load
Bar
kN
mm
psi
Lbs.
Inches
Deflection
Max.*
End
Degrees
Gap
mm/m
Per
mm
Inches/Ft
Coupling
Inches
25
1
32
1 1 4
33.7
1.315
42.4
1.660
68.9
1000
68.9
1000
6.10
1,360
9.63
2,165
3.3
0.13
3.3
0.13
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
68.9
1000
12.61
2,835
19.71
4,430
28.88
6,492
31.44
7,069
42.80
9,621
70.75
15,904
105.6
23,758
108.12
24,306
147.61
33,183
153.34
34,472
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
5 26'
4 19'
3 46'
3 1'
2 29'
2 23'
2 3'
3 11'
2 30'
2 35'
2 12'
2 10'
98.4
1.14
75.0
0.90
60.5
2.38
70.0
2.76
101.6
4.00
111.0
4.37
46.0
1.81
46.0
1.81
65.8
0.79
52.5
0.63
43.3
0.52
41.7
0.50
35.8
0.43
55.8
0.67
43.3
0.52
45.1
0.54
38.4
0.46
37.8
0.45
75.4
2.97
89.9
3.54
103.1
4.06
106.4
4.19
119.1
4.69
151.1
5.95
178.3
7.02
179.8
7.08
208.0
8.19
210.8
8.30
117.6
4.63
133.4
5.25
146.1
5.75
146.1
5.75
162.1
6.38
209.6
8.25
254.0
10.00
254.0
10.00
285.8
11.25
285.8
11.25
46.0
1.81
47.8
1.88
47.8
1.88
47.8
1.88
47.8
1.88
52.3
2.06
51.8
2.04
52.3
2.06
52.3
2.06
52.3
2.06
Coupling Bolts
Qty.
2
2
2
2
2
2
2
2
2
2
2
2
Size
mm
Inches
Approx.
Weight
Kg.
Lbs.
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
0.9
2.0
1.0
2.2
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
M12 x 89
1
2 x 3
M16 x 83
5
8 x 3 1 4
M20 x 121
3
4 x 4 3 4
M20 x 121
3
4 x 4 3 4
M20 x 121
M20 x 121
3
4 x 4 3 4
1.1
2.5
1.4
3.0
1.6
3.5
1.8
4.0
1.8
4.0
3.2
7.0
3.8
8.3
4.5
10.0
5.4
12.0
5.0
11.1
www.grinnell.com
GROOVED COUPLINGS
Figure 707 Heavy Duty Flexible Couplings
(Page 2 of 2)
Tech Data Sheet: G130
Grooved
Couplings
B
B
B
Pipe Size
707AE0273
707AE0324
707AE0355
707AE0406
707AE0457
707AE0508
707AE0610
Nominal
mm
Inches
707AE0219
Part
Number
Max.
Max.
O.D. Pressure End Load
Bar
kN
mm
psi
Lbs.
Inches
Deflection
Max.*
End
Degrees
Gap
mm/m
Per
mm
Inches/Ft
Inches Coupling
200
8
250
10
300
12
350
14
400
16
450
18
500
20
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
55.2
800
55.2
800
55.2
800
20.7
300
20.7
300
20.7
300
20.7
300
207.91
46,741
322.99
72,610
454.35
102,141
205.43
46,181
268.31
60,3189
339.58
76,341
419.23
94,248
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
600
24
609.6
24.000
20.7
300
603.7
135,717
6.4
0.25
1 40'
1 20'
1 7'
1 2'
0 54'
0 48'
0 43'
0 36'
29.2
0.35
23.3
0.28
19.2
0.23
18.3
0.22
15.8
0.19
14.2
0.17
12.5
0.15
271.3
10.68
331.7
13.06
390.9
15.39
423.4
16.67
478.3
18.83
541.3
21.31
596.1
23.47
355.6
14.00
417.6
16.44
478.5
18.84
517.7
20.38
575.1
22.64
638.0
25.12
708.2
27.88
62.7
2.47
66.8
2.63
66.8
2.63
74.7
2.94
74.7
2.94
77.7
3.06
77.7
3.06
10.8
0.13
700.5
27.58
812.8
32.00
81.0
3.19
Coupling Bolts
Qty.
2
2
2
2
3
3
4
4
Size
mm
Inches
Approx.
Weight
Kg.
Lbs.
M22 x 165
7
8 x 6 1 2
1 x 6 1 2
1 x 6 1 2
1 x 5 1 2
1 x 5 1 2
1 x 5 1 2
1 1 8 x 5 3 4
9.7
21.4
13.2
29.0
16.8
37.0
20.9
46.0
26.8
59.0
35.4
78.0
40.4
89.0
1 1 8 x 5 3 4
50.8
112.0
27
GROOVED COUPLINGS
Figure 707L Large Diameter Couplings
Tech Data Sheet: G133
GRINNELL Figure 707L Large Diameter Coupling is designed
for joining large diameter IPS roll grooved pipes. The coupling
castings are a two to eight segment design and utilize two bolts at
each segment joint to ensure proper connection and seal.
Grooved
Couplings
B
B
B
C
A
A
DN650 (26")
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
Max.
Working
Pressure
Bar
psi
650
26
700
28
750
30
800
32
900
36
1000
40
1050
42
660.4
26.0
711.2
28.0
762.0
30.0
812.8
32.0
914.4
36.0
1016.0
40.0
1066.8
42.0
20.7
300
12.1
175
12.1
175
12.1
175
12.1
175
12.1
175
12.1
175
Dimensions
Bolts
Max.
End Load
kN
Lbs
Max.*
End
Gap
mm
inches
A
mm
Inches
B
mm
Inches
C
mm
Inches
708
159,279
479
107,757
550
123,700
626
140,743
792
178,128
978
219,911
1078
242,452
8.6
0.34
8.6
0.34
8.6
0.34
8.6
0.34
8.6
0.34
8.6
0.34
8.6
0.34
754.0
29.68
813
32.0
864
34.0
914
36.0
1016
40.0
1105
43.5
1156
45.5
842.0
33.15
920
36.3
972
38.3
1022
40.3
1124
44.3
1245
49.0
1295
51.5
125.6
4.94
127
5.0
127
5.0
127
5.0
127
5.0
140
5.5
140
5.5
Size
in
No
8 x 9- 5 8
12
8 x 4
12
8 x 4
12
8 x 4
12
8 x 4
16
1 x 3 1 2
16
1 x 3 1 2
Approx.
Weight
Kg.
Lbs.
67.0
147.0
82.0
180.0
95.0
209.0
94.0
207.0
96.0
212.0
123.0
271.0
140.0
308.0
Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for
other pipe materials and/or wall thickness. Contact your GRINNELL Representative for details.
* Maximum available gap between pipe ends. Minimum gap = 0.
Max End Gap is for rolled grooved standard weight pipe.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 19 for coupling specifications and pages 234 - 245 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
28
www.grinnell.com
GROOVED COUPLINGS
Shurjoint Figure 7707N
Large Diameter Flexible Couplings
Shurjoint Tech Data Sheet: C-23
Grooved
Couplings
Surface Finish:
U->`>`>i`vi>}i,i`
U`V}>>i`"
U/>i`iV>}V`}-VVi{
for waste water, hydrocarbons, harsh chemicals and sea
water services, Drynamels #4900 for exterior (outdoor)
architectural applications and others (Option).
For additional details contact Shurjoint.
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(S40S, Roll-grooved)
Class
150
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
Pipe Size
Max. Working Pressure
Angular Movement
Axial
Actual
XS
STD
LW Displacement Degree
Nominal
Per Pipe
O.D.
(0.500)* (0.375) (0.312)
Per
mm
mm
mm / m
mm
Bar
Bar
Bar
Coupling
Inches
Inches
in / ft
Inches
psi
psi
psi
()
350
355.6
20
20
17
6.4
9.0
1 02
14
14.000
300
300
250
0.250
0.11
400
406.4
20
20
17
6.4
8.0
0 54
16
16.000
300
300
250
0.250
0.10
450
457.2
20
20
17
6.4
7.0
0 48
18
18.000
300
300
250
0.250
0.08
500
508.0
20
20
17
6.4
6.0
0 44
20
20.000
300
300
250
0.250
0.08
550
558.8
20
20
17
6.4
6.0
0 39
22
22.000
300
300
250
0.250
0.07
600
609.6
20
20
17
6.4
5.0
0 36
24
24.000
300
300
250
0.250
0.06
Dimensions
Bolts
A
B
C
mm
mm
mm No.
Inches Inches Inches
412
16.23
463
18.23
520
20.45
571
22.48
621.4
24.46
674
26.55
479
18.85
547
21.53
605
23.81
656
25.82
724.6
28.52
780
30.70
75
2.95
75
2.95
79
3.11
79
3.11
79
3.11
79
3.11
2
2
2
2
Size
in
8 x 6 1 2
1 x 6 1 2
1 x 6 1 2
1 x 6 1 2
8 x 6 1 2
8 x 6 1 2
Approx.
Weight
Kg.
Lbs.
15.7
34.5
18.4
40.5
22.3
47.1
24.5
54.0
28.6
63.0
29.5
65.1
Deflection or angular movement is the maximum value that a coupling allows under no internal pressure.
* Pressure ratings are based on cut-grooved XS carbon steel pipe.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 19 for coupling specifications and pages 234 - 245 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
29
GROOVED COUPLINGS
Figure 909 Plain End Couplings
Tech Data Sheet: G190
Grooved
Couplings
B
B
Part
Number
909AE0060
909AE0073
909AE0076
909AE0089
909AE0114
909AE0165
909AE0168
909AE0219
909AE0273
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76.1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
150
165.1
165.1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
Max.
Pressures
Bar
psi
Max.
End Load
kN
Lbs.
51.7
750
41.4
600
41.4
600
41.4
600
31
450
20.7
300
20.7
300
17.2
250
17.2
250
14.78
3322.6
17.33
3895.1
23.00
5,170.6
25.68
5772.7
31.83
7,156.9
44.30
9,959.0
46.00
10,341.5
64.97
14,606.6
100.93
22,690.6
A
mm
Inches
93.7
3.69
105.9
4.17
111.9
4.41
122.2
4.81
150.6
5.93
203.7
8.02
208.0
8.19
271.5
10.69
333.5
13.13
Dimensions
B
mm
Inches
146.1
5.75
158.8
6.25
181.1
7.13
192.0
7.56
219.2
8.63
293.7
11.56
296.7
11.68
346.2
13.63
403.4
15.88
C
mm
Inches
84.1
3.31
84.1
3.31
98.6
3.88
84.1
3.31
98.6
3.88
293.6
11.56
108.0
4.25
124.7
4.91
124.7
4.91
Coupling Bolts
Size
Qty.
mm
Inches
M16 x 90
2
5
8 x 3 1 2
M16 x 90
2
5
8 x 3 1 2
M20 x 121
2
3
4 x 4 3 4
M20 x 121
2
3
4 x 4 3 4
M20 x 121
2
3
4 x 4 3 4
2
1 x 6 1 2
2
1 x 6 1 2
M22 x 140
4
7
8 x 5 1 2
M22 x 140
4
7
8 x 5 1 2
Approx.
Weight
Kg.
Lbs.
2.4
5.4
2.7
5.9
2.1
4.6
4.1
9.0
6.1
13.5
9.8
21.6
10.7
23.5
15.9
35.1
22.0
48.5
30
www.grinnell.com
GROOVED COUPLINGS
Figure 780 Grooved Snap Couplings
Tech Data Sheet: G145
The GRINNELL Figure 780 Grooved Snap Coupling is designed for
quickly connecting and disconnecting cut or rolled grooved piping
systems. By utilizing a hinged lever mechanism, grooved piping segments
are joined quickly and securely without nuts and bolts. Coupling housing
segments are locked in place by securing the lever handle with a split pin.
Additional Features:
Grooved
Couplings
U1iiV}vi>i>v>vi>`V>>
U-ix(5" to 8") feature a cross-ribbed housing design
for extra strength.
U,>i`vii >300 psi).
Coatings
Split Pin
U >VqiiV`iV>i`
U
>L-ii7i,`
(standard)
conforming to ASTM A 421
Ui`]<V>>i`
Gasket Specifications
(optional)
U>`i
*gaskets
Toggle Links
have a Green colour stripe
code for temperature service
U*>i`
>L-iiVv}
from -34C to 110C (-30F to
to ANSI C1010 or C1020
230F).
Hinge Pin
Rivet
U
>L-iiVv}
ANSI C1010
Part
Number
780AE0048
780AE0060
780AE0073
780AE0076
780AE0089
780AE0114
780AE0139
780AE0141
780AE0165
780AE0168
780AE0219
Nominal
mm
Inches
O.D.
mm
Inches
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
8
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.565
165.1
6.500
168.3
6.625
219.1
8.625
U>`i/ i gaskets
have an Orange colour stripe
code for temperature service
from -29C to 82C (-20F to
180F).
U
>i>`ii`
>L-ii
conforming to ANSI C1212
Pipe Size
Split Pin
Dimensions
Deflection
Max. *
End Load
kN
Lbs.
Max. End
Gap
mm
Inches
A
mm
Inches
B
mm
Inches
C
mm
Inches
3.8
851
5.9
1,329
8.7
1,947
9.4
2,121
12.8
2,886
21.2
4,771
31.7
7,127
32.4
7,289
44.3
9,955
46.0
10,341
78.0
17,528
1.6
0.06
1.6
0.06
1.6
0.06
1.6
0.06
1.6
0.06
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
75.0
2.95
86.0
3.39
92.0
3.62
92.0
3.62
119.0
4.69
165.0
6.50
189.0
7.44
189.0
7.44
213.0
8.39
216.0
8.50
278.0
10.95
118.0
4.65
121.0
4.76
150.0
5.91
150.0
5.91
163.0
6.42
205.0
8.07
253.0
9.96
253.0
9.96
278.0
10.94
281.0
11.06
356.0
14.02
47.0
1.85
48.0
1.89
48.0
1.89
48.0
1.89
48.0
1.89
52.0
2.05
52.0
2.05
52.0
2.05
52.0
2.05
52.0
2.05
62.0
2.44
Degrees
Per
Coupling
3 48'
3 31'
2 30'
2 24'
2 24'
3 12'
2 37'
2 36'
2 14'
2 10'
1 40'
mm/m
Inches/Ft
Approx.
Weight
Kg.
Lbs.
66.4
0.80
61.5
0.74
43.7
0.52
41.9
0.50
41.9
0.50
55.9
0.67
45.7
0.55
45.4
0.54
39.0
0.47
37.8
0.45
29.1
0.35
1.0
2.2
1.1
2.4
1.4
3.1
1.4
3.1
1.8
4.0
2.7
5.9
4.9
10.8
4.9
10.8
5.8
12.8
5.8
12.8
9.3
20.5
31
GROOVED COUPLINGS
Shurjoint Figure XH-70EP Extra Heavy Rigid Couplings
With End Protection (EP) Gasket
Shurjoint Tech Data Sheet: C-09
Grooved
Couplings
MATERIAL SPECIFICATIONS
Housing:
UVi-/x]x{x>`
ASTM A 395 Gr.65-45-15, min. tensile strength
4481 Bar (65,000 psi).
Surface Finish:
U >Vi>i
Rubber Gasket:
U>`i/ i EP gasket (Colour code: Orange
stripe) Recommended for petroleum products, air with oil
vapors, vegetable and mineral oils within the specified
temperature range. Also good for water services under
66C (150F).
Temperature range: -29C to 82C (-20F to 180F).
Do not use for HOT WATER above 66C (150F) or HOT
DRY AIR above 60C (140F)
EP Gasket
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
200
8
250
10
300
12
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Ui>i>i`V>L>}>iiii>VL
ASTM A 449-83a (or A 183 Gr. 2), minimum tensile
strength 7584 Bar (110,000 psi), Zinc electroplated, with
heavy-duty hexagonal nuts to ASTM A 563
Max.
Working
Pressure
Bar
psi
175
2500
175
2500
175
2500
175
2500
140
2000
140
2000
88
1250
88
1250
Dimensions
Bolt / Nut
Max. End
Load
kN
Lbs.
A
mm
Inches
B
mm
Inches
C
mm
Inches
50
11070
73.2
16220
108.6
24040
179.5
39740
311.3
68910
527.6
116790
514.8
113400
724.7
159510
90
3.54
103
4.06
122
4.80
157
6.18
218
8.58
275
10.83
334
13.15
390
15.35
150
5.90
168
6.61
188
7.40
222
8.74
295
11.61
364
14.33
424
16.70
480
18.93
49
1.92
49
1.92
51
2.00
55
2.17
57
2.25
70
2.75
75
2.95
75
2.95
Size
in
No.
8 x 2 3 4
8 x 2 3 4
8 x 2 3 4
4 x 4 3 4
8 x 5 1 2
1 x 5 1 2
1 x 5 1 2
1 x 5 1 2
Bolt
Weight
Kg.
Lbs.
1.5
3.3
1.8
4.0
2.2
4.8
4.0
8.8
8.0
17.6
10.9
24.0
14.2
31.2
16.7
36.7
32
www.grinnell.com
GROOVED COUPLINGS
Figure 716 Flexible Reducing Couplings
Tech Data Sheet: G120
The GRINNELL Figure 716 Flexible Reducing Coupling allows for a direct
transition between two different pipe sizes and replaces two couplings
and a reducing fitting. It is capable of pressures up to 34.5 Bar (500 psi)
depending on pipe size and wall thickness. A flexible reducing coupling is
not recommended for low-temperature applications.
Grooved
Couplings
Pipe Size
Part
Number
716AE2015
716AE2520
716ME2620
716AE3020
716AE3025
716ME3026
716AE4220
716AE4225
716ME4226
716AE4230
716ME5242
716AE5342
716ME6242
716AE6342
716AE6353
716AE8063
Nominal
DN
In.
50 x 40
2 x 1- 1 2
65 x 50
2- 1 2 x 2
65 x 50
76.1mm x 2
80 x 50
3x2
80 x 65
3 x 2- 1 2
80 x 65
3 x 76.1mm
100 x 60
4x2
100 x 65
4 x 2- 1 2
100 x 65
4 x 76.1mm
100 x 80
4x3
125 x 100
139.7mm x 4
125 x 100
5x4
150 x 100
165.1mm x 4
150 x 100
6x4
150 x 125
6x5
200 x 150
8x6
O.D.
mm
In.
60.3 x 48.3
2.375 x 1.900
73.0 x 60.3
2.875 x 2.375
76.1 x 60.3
3.000 x 2.375
88.9 x 60.3
3.500 x 2.375
88.9 x 73.0
3.500 x 2.875
88.9 x 76.1
3.500 x 3.000
114.3 x 60.3
4.500 x 2.375
114.3 x 73.0
4.500 x 2.875
114.3 x 76.1
4.500 x 3.000
114.3 x 88.9
4.500 x 3.500
139.7 x 114.3
5.500 x 4.500
141.3 x 114.3
5.563 x 4.500
165.1 x 114.3
6.500 x 4.500
168.3 x 114.3
6.625 x 4.500
168.3 x 141.3
6.625 x 5.563
219.1 x 168.3
8.625 x 6.625
Max.
Pressures
Bar
psi
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
27.6
400
27.6
400
27.6
400
27.6
400
Max.
Deflection
Max.*
End
End Gap
Load
Degrees
mm
mm/m
kN
Per
In.
In./Ft
Lbs.
Coupling
6.31
3.3
32.9
1 53'
1418
0.13
0.39
9.85
3.3
27.1
1 33'
2215
0.13
0.32
9.85
3.3
27.3
1 34'
2215
0.13
0.33
9.85
3.3
22.4
1 17'
2215
0.13
0.27
14.44
3.3
22.4
1 17'
3246
0.13
0.27
15.72
3.3
22.4
1 17'
3534
0.13
0.27
9.85
4.8
46.0
2 38'
2215
0.19
0.55
14.44
4.8
46.0
2 38'
3246
0.19
0.55
15.72
4.8
46.0
2 38'
3534
0.19
0.55
21.40
4.8
46.0
2 38'
4811
0.19
0.55
35.37
6.4
46.0
2 38'
7952
0.25
0.55
35.37
6.4
36.4
2 5'
7952
0.25
0.44
28.30
6.4
32.0
1 50'
6362
0.25
0.38
28.30
6.4
30.0
1 44'
6362
0.25
0.36
43.25
6.4
30.0
1 44'
9722
0.25
0.36
61.33
6.4
21.0
1 15'
13789
0.25
0.26
Dimensions
mm In.
A
88.9
3.50
101.6
4.00
106.4
4.19
119.1
4.69
119.1
4.69
119.1
4.69
152.4
6.00
152.4
6.00
152.4
6.00
152.4
6.00
179.3
7.06
181.1
7.13
207.8
8.18
212.9
8.38
212.9
8.38
271.5
10.69
128.5
5.06
139.7
5.50
149.4
5.88
165.1
6.50
165.1
6.50
165.1
6.50
206.5
8.13
206.5
8.13
206.5
8.13
206.5
8.13
241.3
9.50
242.8
9.56
274.6
10.81
276.4
10.88
276.4
10.88
349.3
13.75
47.8
1.88
47.8
1.88
47.8
1.88
47.8
1.88
47.8
1.88
47.8
1.88
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
52.3
2.06
52.3
2.06
52.3
2.06
52.3
2.06
52.3
2.06
57.2
2.25
Coupling
Approx.
Bolts Size
Weight
(Qty 2)
kg
mm
Lbs.
In.
M10 x 57
3
8 x 2- 14
M120 x 57
3
8 x 2- 14
M12 x 89
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
M16 x 83
5
8 x 3- 14
M16 x 83
5
8 x 3- 14
M16 x 83
M16 x 83
5
8 x 3- 14
M20 x 121
M20 x 121
3
4 x 4- 3 4
M20 x 121
M20 x 121
3
4 x 4- 3 4
M20 x 121
3
4 x 4- 3 4
M22 x 165
7
8 x 6- 1 2
1.3
2.8
1.5
3.3
1.5
3.3
2.0
4.3
1.8
3.9
1.9
4.2
2.4
5.2
3.0
6.7
2.8
6.2
2.8
6.2
4.4
9.6
4.4
9.6
5.8
12.8
5.8
12.8
6.3
13.8
9.1
20.0
33
GROOVED COUPLINGS
Figure 702 Mechanical Outlet Couplings
(Page 1 of 2)
Tech Data Sheet: G220
Grooved
Couplings
Additional features:
U>>Lii{x(1 1 2" to 6")
U,>i`vii{x >(500 psi)
U->Liv>ViVix{(10" HG)
C
A
T
A
Figure 702
Outlet Coupling with Female BSP Outlet
Figure 702
Outlet Coupling with Male BSP Outlet
Branch Size
Grooved
Female Male
Nominal O.D.
Thread Thread Nominal O.D.
DN
mm
mm
mm
mm
mm
In.
In.
In.
In.
In.
In.
21.3
1
2
26.9
40
48.3
3
1.900
1- 1 2
4
33.7
21.3
1
2
26.9
50
60.3
3
2
2.375
4
33.7
33.7
25
33.7
1
1
1
1.315
21.3
1
2
26.9
3
4
33.7
65
73.0
2- 1 2
2.875
1
42.4
42.4
32
42.4
1- 14
1- 14
1- 14
1.660
48.3
48.3
40
48.3
1- 1 2
1- 1 2
1- 1 2
1.900
34
End Gap
Range
mm
In.
20-22
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
Max.
Run End
Load
kN
Lbs.
6.3
1418
9.9
2215
14.4
3246
Figure 702
Outlet Coupling with Grooved Outlet
Dimensions
mm In.
Bolt
Size
In.
89.0
3.50
94.0
3.70
94.0
3.70
114.3
4.50
114.3
4.50
114.3
4.50
127.0
5.00
127.0
5.00
127.0
5.00
161.0
6.33
161.0
6.33
161.0
6.33
161.0
6.33
161.0
6.33
70.0
2.75
70.0
2.75
70.0
2.75
70.0
2.75
70.0
2.75
70.0
2.75
83.0
3.25
83.0
3.25
83.0
3.25
83.0
3.25
83.0
3.25
52.0
2.06
52.0
2.06
49.0
1.94
59.0
2.32
59.0
2.32
56.0
2.20
56.0
2.20
65.0
2.56
62.0
2.44
8 x 2- 1 8 U
8 x 2- 1 8 U
2 x 2- 3 8 U
Approx.
Weight
kg
Lbs.
1.2
2.6
1.2
2.6
1.3
2.9
1.4
3.1
1.4
3.1
1.5
3.3
2.2
4.8
2.1
4.6
4.4
2.2
2.3
5.1
5.9
2.4
www.grinnell.com
GROOVED COUPLINGS
Figure 702 Mechanical Outlet Couplings
(Page 2 of 2)
Tech Data Sheet: G220
Grooved
Couplings
C
A
T
A
Figure 702
Outlet Coupling with Female BSP Outlet
Run Pipe Size
Figure 702
Outlet Coupling with Male BSP Outlet
Branch Size
Grooved
Female Male
Nominal O.D.
Thread Thread Nominal O.D.
DN
mm
mm
mm
mm
mm
In.
In.
In.
In.
In.
In.
26.9
3
4
33.7
33.7
25
33.7
1
1
1
1.315
80
88.9
3
3.500
42.4
1- 14
48.3
1- 1 2
26.9
114.3
4.500
150
6
168.3
6.625
40
1- 1 2
48.3
1.900
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
41-46
Max.
Run End
Load
kN
Lbs.
21.4
4811
Dimensions
mm In.
A
102.0
4.00
102.0
4.00
175.0
6.87
175.0
6.87
175.0
6.87
211.0
83.0
3.25
83.0
3.25
83.0
3.25
93.0
72.0
2.83
70.0
2.75
94.0
1.63-1.81
8.31
3.66
3.70
33.7
1
93.0
3.66
91.0
3.58
48.3
1- 1 2
60.3
2
48.3
1- 1 2
60.3
2
40
1- 1 2
50
2
48.3
1.900
60.3
2.375
124.0
4.88
124.0
4.88
154.0
6.06
154.0
6.06
211.0
8.31
48.3
1- 1 2
60.3
2
48.3
1.900
60.3
2.375
33.7
1.315
42.4
1.660
41-46
1.63-1.81
48.3
1- 1 2
60.3
2
33.7
1
40
1- 1 2
50
2
25
1
32
1- 14
211.0
8.31
211.0
8.31
276.0
10.86
276.0
10.86
276.0
10.86
93.0
3.66
93.0
3.66
94.0
3.70
94.0
3.70
94.0
3.70
84.0
3.31
121.0
4.76
121.0
4.76
100
4
48.3
1- 1 2
End Gap
Range
mm
In.
Figure 702
Outlet Coupling with Grooved Outlet
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
35.4
7952
76.7
17,235
Bolt
Size
In.
Approx.
Weight
kg
Lbs.
2.7
5.9
2.8
6.2
2.9
6.4
4.2
2 x 3 U
9.2
4.3
9.5
8 x 3- 2 U
8 x 3- 1 2 U
4.3
9.5
4.5
9.9
6.0
13.2
6.2
13.6
6.5
14.3
Threads are BSP. Some size outlets are available with NPT threads. Contact GRINNELL Products for details.
U ">>>Li -Li
Contact GRINNELL Sales Representative for dimension details.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 19 for coupling specifications and pages 234 - 245 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
35
GROOVED COUPLINGS
Shurjoint Figure 7706-T Transition Couplings
Shurjoint Tech Data Sheet: C-07
MATERIAL SPECIFICATIONS
Grooved
Couplings
Housing:
UVi-/x]x{x>`
ASTM A 395, Gr. 65-45-15, min. tensile strength
4481 Bar (65,000 psi).
Surface Finish:
U->`>`>i`vi>}i,
red.
U`V}>>i`"
U
>},i`iV
(Option)
Rubber Gasket:
IPS
PIPE
ISO
PIPE
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(S40S, Roll-grooved)
Class 150
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
O.D.
mm
Inches
73.0 x 76.1
2.875 x 3.000
168.3 x 165.1
6.625 x 6.500
U"i\>`i"i>i
Grade L - Silicone.
For additional details contact Shurjoint.
Angular Movement
Max. End
Axial
Load
Displacement
Per
Per Pipe
kN
mm
Coupling
mm/m
Lbs.
Inches
Degree
in/ft.
21.0
5.90
0 ~ 3.2
2 -24'
1330
- ~ 0.13
0.25
44.29
0 ~ 6.4
19.0
1 - 06'
9960
0 ~ 0.25
0.23
Dimensions - mm Inches
A
Bolt / Nut
Size
in
102
4.02
200
7.87
138
5.43
270
10.63
48
1.89
53
2.09
M10 x 55
3
8 x 2 1 8
M16 x 90
5
8 x 3 1 2
Approx.
Weight
Kg.
Lbs.
1.2
2.6
3.5
7.7
*Deflection or angular movement is the maximum value that a coupling allows with no internal pressure.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 19 for coupling specifications and pages 234 - 245 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
36
www.grinnell.com
GROOVED COUPLINGS
Electrical Continuity
Grooved
Couplings
DETAIL A
DETAIL A
Part
Number
CLIP0103
CLIP0406
CLIP0812
Suitable
for size Coupling
Inches
1-3
4-6
8 - 12
Approx
Weight
kg
0.005
0.005
0.005
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
37
GROOVED COUPLINGS
GRINNELL Coupling Installation Information
Installation Handbook: IH-1000M
Grooved
Couplings
WARNING
Failure to follow these instructions may result in improper
product installation, joint failure or leakage, serious personal injury, and/or property damage.
The following instructions should be used as a guideline
for the proper installation of GRINNELL Grooved Products.
1. Always read and understand the instructions.
2. To avoid serious personal injury always wear appropriate personal protective equipment (ppe), such as
safety glasses, hard hat and foot protection.
3. Never remove any piping component without verifying
that the system is de-pressurized and drained. Failure
to due so may result in serious personal injury.
4. Ensure that the supplied gasket is suitable for the intended application. To prevent deterioration of the
gasket material, a petroleum lubricant should never
be used. Use a recommended lubricant to install the
gasket.
5. The pipe groove dimensions must be in accordance
with Standard Roll Groove or Cut Groove Specications. Refer to Pages 221 to 232 or Tech Data Sheet
G710 for additional information.
38
www.grinnell.com
FLANGE
ADAPTERS
39
FLANGE ADAPTERS
>}i`>i/>Liv
i
MATERIAL SPECIFICATIONS
Figure 71
Flange Adapters
PN10/PN16 BS 4504
Page 41
Flange
Adapters
Figure 71
Flange Adapters
ANSI Class 125/150
Page 42
>}i`>i
Washers
Page 44
>}i`>i
Technical Data
Page 45
U-/xq->`>`iVvV>v`
}>>}
Bolt/Nut Specifications
U
>Lii>iVL>`>ii>i>i`
>`VviV>iiv-/
n>iii}vxn]{*>
(110,000 psi) >`>iViiV>i`
-/
U`VV`i`iVLVv}i
V>iiv-/xn>i>>>Li
ii
>V,
*`V
U->i-ii>`L>i1i`>`
V1iii Vv-/
]
>]iV->i-ii
Vv-/{/i]>`in
Coatings
U,i`q i>`>,>`>`
U">}iq i>`>">
Ui`]<V>>i`">
Gasket Specifications
U>`i
*}>i>i>}iiV
V`ii`ivV>>`Vv-/
viViii>iv{c
c
(-30F to 230F)/i>iiVi`i`v
>iiVii`c
(230F)/i>i
iVi`i`viiiVi
U>`i/ i}>i>i>">}iV
V`ii`ivV>>`Vv-/
viViii>ivc
nc
(-20F to 180F)/i>iiVi`i`v
ii`V]i}i>Li]i>]>`
>>
General notes: It is the Designers responsibility to select products suitable for the intended service and to ensure that pressure ratings
and performance data is not exceeded. Always read and understand the installation constructions. Never remove any piping
components nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material
should be verified to be compatible for the specific application.
40
www.grinnell.com
FLANGE ADAPTERS
Figure 71
Flange Adapters
(PN10/PN16 BS 4504)
Tech Data Sheet: G150
71DAE0060
71DAE0076
71DAE0089
71DAE0114
71DME0139
71DAE0165
71DME8219
71DME0219
71DAE8273
71DAE0273
71DME8324
71DME0324
Flange
Type
Nominal
DN
In.
O.D.
mm
In.
50
2
65
76.1mm
80
3
100
4
125
139.7mm
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
PN10 /
PN16
165.1
PN10 /
PN16
150
165.1mm
150
71DAE0168
6
200
8
250
10
300
12
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Flange
Adapters
B E D
Pipe Size
Part
Number
PN10 /
PN16
PN10 /
PN16
PN10 /
PN16
PN10 /
PN16
PN10 /
PN16
PN10
PN16
PN10
PN16
PN10
PN16
Max
End
Load
N
Lbs.
*D
*E
5889
1,324
8665
1,948
12.838
2,886
21.222
4,771
32.436
7,292
162.1
6.38
184.9
7.28
200.2
7.88
219.9
8.66
249.9
9.84
125.0
4.92
145.0
5.71
160.0
6.30
180.1
7.09
210.1
8.27
19.1
0.75
22.4
0.88
23.9
0.94
23.9
0.94
25.4
1.00
60.5
2.38
76.1
3.00
88.9
3.50
114.3
4.50
139.7
5.50
86.6
3.41
102.4
4.03
115.1
4.53
140.5
5.53
165.9
6.53
184.2
7.25
205.5
8.09
222.5
8.76
239.5
9.43
271.5
10.69
Recommended
Flange Mating
Approx.
Bolts
Wt.
Size
kg
Dia. x Lg
Lbs
Qty.
mm
In.
M16 x 76
1.4
4
3.0
M16 x 76
2.3
4
5.0
M16 x 76
2.5
8
5.6
M16 x 76
3.2
8
7.0
M16 x 89
4.2
8
9.2
44.282
285.0
240.3
24.5
165.1
194.6
307.3
M20 x 89
9,955
45.999
10,341
77.968
17,528
77.968
17,528
11.22
279.4
11.00
336.8
13.26
339.8
13.38
9.46
241.1
9.49
292.1
11.50
295.1
11.62
1.00
25.4
1.00
28.6
1.125
28.6
1.125
6.50
168.1
6.62
218.9
8.62
218.9
8.62
7.66
197.6
7.78
254.5
9.94
254.5
9.94
12.10
301.8
11.88
358.6
14.12
362.7
14.28
121.121
27,229
170.380
38,303
170.380
38,303
170.380
38,303
395.2
15.56
406.4
16.00
445.0
17.52
460.2
18.12
350.0
13.78
355.1
13.98
399.8
15.74
410.0
16.14
30.2
1.188
30.2
1.188
31.8
1.25
31.8
1.25
273.1
10.75
273.1
10.75
323.9
12.75
323.9
12.75
312.4
12.31
312.7
12.31
363.5
14.31
363.5
14.31
419.1
16.50
428.8
16.88
470.4
18.52
486.2
19.14
Dimensions - mm In.
M20 x 89
M20 x 89
M20 x 89
M20 x 102
M22 x 102
M22 x 102
M22 x 102
8
8
8
12
12
12
12
12
4.5
10.0
7.5
16.6
9.9
21.8
9.9
21.8
10.2
22.5
11.0
24.2
12.5
27.5
12.7
28.0
41
FLANGE ADAPTERS
Figure 71 Flange Adapters
(ANSI Class 125/150)
The Figure 71 Flange Adapter is capable of pressures up to 20.7 Bar (300
psi) depending on pipe size and wall thickness. It provides a direct transition
from flanged components to a grooved piping system. I.P.S. size flange bolt
patterns conform to ANSI Class 125 and 150.
(Page 1 of 2)
Tech Data Sheet: G150
Flange
Adapters
B E D
Pipe Size
Part
Number
71AAE0060
71AAE0073
71AAE0089
71AAE0114
71AAE0141
71AAE0168
71AAE0219
71AAE0273
71AAE0324
42
Recommended
Flange Mating
Bolts
Dimensions - mm Inches
Max Max End
Pressure Load
N
Bar
psi
Lbs.
Nominal
mm
Inches
O.D.
mm
Inches
50
2
60.3
2.375
20.7
300
5889
1,324
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
8665
1,948
12.838
2,886
21.222
4,771
32.436
7,292
45.999
10,341
77.968
17,528
121.121
27,229
170.380
38,303
*D
*E
162.1
6.38
120.7
4.75
19.1
0.75
60.5
2.38
86.6
3.41
184.2
7.25
178.0 140.0
7.00
5.50
190.5 152.4
7.50
6.00
228.6 190.5
9.00
7.50
254.0 215.9
10.00 8.50
279.4 241.3
11.00 9.50
342.9 298.5
13.50 11.75
406.4 362.0
16.00 14.25
482.6 431.8
19.00 17.00
22.0
0.88
23.9
0.94
23.9
0.94
25.4
1.00
25.4
1.00
28.7
1.13
30.2
1.19
31.8
1.25
73.0
2.88
88.9
3.50
114.3
4.50
141.2
5.56
168.1
6.62
218.9
8.62
273.1
10.75
323.9
12.75
99.0
3.91
115.1
4.53
140.5
5.53
170.7
6.72
197.6
7.78
252.5
9.94
312.7
12.31
363.5
14.31
200.0
7.88
251.0
9.88
251.5
9.90
289.1
11.38
301.8
11.88
365.3
14.38
428.8
16.88
508.0
20.00
Size
Dia. x Lg
mm
Inches
8 x 3
8 x 3
5
8 x 3
5
8 x 3
3
4 x 3 1 2
3
4 x 3 1 2
3
4 x 3 1 2
7
8 x 4
7
8 x 4
5
Approx.
Wt.
Kg.
Lbs.
Qty.
4
4
4
8
8
8
8
12
12
1.4
3.0
2.3
5.0
2.5
5.6
3.2
7.0
4.2
9.2
4.5
10.0
7.5
16.6
9.9
21.8
11.0
24.2
www.grinnell.com
FLANGE ADAPTERS
Figure 71 Flange Adapters
(ANSI Class 125/150)
(Page 2 of 2)
Tech Data Sheet: G150
Flange
Adapters
C
B
E D
Segment
Bolt
Sizes 350mm - 600mm (14" - 24")
Pipe Size
Part
Number
71AAE0355
71AAE0406
71AAE0457
71AAE0508
71AAE0609
Nominal
mm
Inches
O.D.
mm
Inches
350
14**
400
16**
450
18**
500
20**
600
24**
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Recommended
Flange Mating
Bolts
Dimensions - mm Inches
Max Max End
Pressure Load
N
Bar
psi
Lbs.
20.7
300
20.7
300
20.7
300
20.7
300
17.2
250
205.423
46,181
268.294
60,315
340.089
76,455
419.223
94,245
603.713
135,720
533.4
21.00
596.9
23.50
635.0
25.00
698.5
27.50
812.8
32.00
476.5 36.5
18.76 1.44
540.0 38.10
21.26 1.50
578.1 41.3
22.76 1.63
635.0 44.5
25.00 1.75
749.3 49.0
29.50 1.93
*D
*E
Size
Dia. x Lg
mm
Inches
355.6
14.00
406.4
16.00
457.2
18.00
508.0
20.00
609.6
24.00
381.8
15.03
431.7
17.00
482.8
19.01
534.2
21.03
636.3
25.05
609.6
24.00
673.1
26.50
736.6
29.00
800.1
31.50
914.4
36.00
1 x 4 14
1 x 4 14
1 1 8 x 4 3 4
1 1 8 x 4 3 4
1 14 x 5 1 2
Approx.
Wt.
Kg.
Lbs.
Qty.
12
16
16
20
20
11.3
25.0
14.0
31.0
15.8
35.0
20.4
45.0
26.8
59.0
43
FLANGE ADAPTERS
Flange Adapter Washers
Flange
Adapters
U,LLiv>Vi
U`>}77V>v>}i
U,LLiv>Vi`>vi>i
U-i>i`v>}iv>Vi
Contact a GRINNELL Sales Representative for additional
information.
Grooved Pipe
Part Number
PN10/PN16
ANSI
INSDIN060M
INS060M
INS073M
INSDIN076M
INSDIN089M
INS089M
INSDIN114M
INS114M
INSDIN139M
INS141M
INSDIN165M
INSDIN168M
INS168M
INSDIN219M
INS219M
INSDIN273M
INS273M
INSDIN324M
INS324M
INS355M
INS406M
INS457M
INS508M
INS609M
B A
Mating Flange
Component
GRINNELL
Flange Adapter
Gasket
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
60.3
50
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
350
355.6
14
14.000
400
406.4
16
16.000
450
457.2
18
18.000
500
508.0
20
20.000
600
609.6
24
24.000
A
mm
Inches
100.1
3.94
119.1
4.69
124.2
4.89
131.8
5.19
169.9
6.69
189.2
7.45
192.0
7.56
215.1
8.47
217.4
8.56
274.6
10.81
335.0
13.19
404.9
15.94
444.5
17.50
508.0
20.00
542.9
21.38
600.1
23.63
711.2
28.00
Dimensions
B
mm
Inches
57.2
2.25
69.9
2.75
73.2
2.88
85.9
3.38
111.3
4.38
135.1
5.32
136.7
5.38
160.5
6.32
163.6
6.44
214.4
8.44
266.7
10.50
317.5
12.50
342.9
13.50
393.7
15.50
444.5
17.50
495.3
19.50
596.9
23.50
C
mm
Inches
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.0
0.12
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
44
www.grinnell.com
FLANGE ADAPTERS
Flange Adapter
Technical Data
Mating Flange
Component
GRINNELL
Fig. 71
Flange
Adapters
Grooved
Pipe
Flange
Adapter
Washer
Rubber
Surface
Exhibit A
Mating Flange
Component
GRINNELL
Fig. 71
Grooved
Pipe Flange
Adapter
Washer
Full Face
Gasket
Exhibit B
45
FLANGE ADAPTERS
Figure 343 & 344 Flange Adapters
(PN10/PN16 BS 4504)
(Page 1 of 2)
E to E
Flange
Adapters
Part
Number
343F00060
343F00076
343F00089
343F00108
343F00114
343F00133
343F00139
343F00159
343F00165
343F00168
344F00219
343F00219
344F00273
343F00273
344F00324
343F00324
46
Pipe Size
Nominal
mm
Inches
50
2
65
76.1mm
80
3
100
108.0mm
100
4
125
133.0mm
125
139,7mm
125
159.0mm
150
165,1mm
150
6
O.D.
mm
Inches
60.3
2.375
76.1
3.000
88.9
3.500
108.0
4.252
114.3
4.500
133.0
5.236
139.7
5.500
159.0
6.260
165.1
6.500
168.3
6.625
200
8**
219.1
8.625
250
10**
273.0
10.750
300
12**
323.9
12.750
Flange
Drilling
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10 &
PN16
PN10
PN16
PN10
PN16
PN10
PN16
E to E
mm
Inches
95.0
3.74
95.0
3.74
100.0
3.94
102.0
4.02
102.0
4.02
105.0
4.13
105.0
4.13
105.0
4.13
105.0
4.13
105.0
4.13
112.0
4.41
112.0
4.41
138.0
5.43
138.0
5.43
138.0
5.43
138.0
5.43
Mating Flange
Bolt
Qty.
Bolt Size
mm
M16 x 65
M16 x 65
M16 x 70
M16 x 70
M16 x 70
M16 x 75
M16 x 75
M16 x 75
M20 x 80
M20 x 80
M20 x 80
12
M20 x 90
M20 x 90
12
M24 x 100
M20 x 90
12
M24 x 100
Approx.
Weight
Kg.
Lbs.
2.3
5.07
3.3
7.27
4.0
8.82
4.5
9.92
4.6
10.14
5.9
13.00
6.0
13.23
7.1
15.65
7.2
15.87
7.2
15.87
10.2
22.49
10.2
22.49
18.0
39.68
18.0
39.68
22.4
49.38
22.4
49.38
www.grinnell.com
FLANGE ADAPTERS
Figure 343 & 344 Flange Adapters
(PN10/PN16 BS 4504)
(Page 1 of 2)
E to E
Pipe Size
Part
Number
344T00355
343T00355
344T00406
343T00406
344T00457
343T00457
344T00508
343T00508
344T00610
343T00610
Nominal
mm
Inches
O.D.
mm
Inches
350
14
355.6
14.000
400
16
406.4
16.000
450
18
457.2
18.000
500
20
508.0
20.000
600
24
609.6
24.000
Flange
Drilling
PN10
PN16
PN10
PN16
PN10
PN16
PN10
PN16
PN10
PN16
E to E
mm
Inches
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
Flange
Adapters
Mating Flange
Bolt
Qty.
Bolt Size
mm
M20 x 100
16
M24 x 115
M24 x 110
16
M27 x 125
M24 x 115
20
M27 x 140
M24 x 115
20
M30 x 160
M24 x 115
20
M33 x 180
Approx.
Weight
Kg.
Lbs.
55.3
121.91
55.3
121.91
61.7
136.03
61.7
136.03
76.2
167.99
76.2
167.99
94.3
207.90
94.3
207.90
124.3
274.03
124.3
274.03
47
FLANGE ADAPTERS
Figure 341 Flange Adapters
(ANSI Class 150#)
Tech Data Sheet: G180
E to E
Flange
Adapters
Pipe Size
Part
Number
341F00060
341F00073
341F00089
341F00114
341F00141
341F00168
341F00219
341F00273
341F00324
341T00355
341T00406
341T00457
341T00508
341T00610
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
E to E
mm
Inches
101.6
4.00
101.6
4.00
101.6
4.00
152.4
6.00
152.4
6.00
152.4
6.00
152.4
6.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
Approx.
Weight
Kg.
Lbs.
8 x 2 3 4
8 x 2 3 4
8 x 2 3 4
8 x 2 3 4
4 x 2 7 8
4 x 3 1 8
4 x 3 1 4
12
8 x 3 1 2
12
8 x 3 3 4
12
1 x 4 1 2
16
1 x 4 3 4
16
1 1 8 x 5
20
1 1 8 x 5 1 2
20
1 1 4 x 6
2.8
6.4
4.0
8.8
4.7
10.4
8.3
18.2
10.0
22.0
12.7
28.1
19.8
43.7
30.9
68.2
43.6
96.1
55.8
123.0
68.5
151.0
74.8
165.0
93.0
205.0
120.2
265.0
48
www.grinnell.com
GROOVED
FITTINGS
49
GROOVED FITTINGS
Grooved Fittings Table of Contents
Grooved
Fittings
Figure 210
90 Elbows
Page 52
Figures 210LR
& 310LR
90 Long Radius
Elbows
Page 53
Figures 361,
362, 363, 364
& 365
End Caps with BSP
Threaded Outlets
Pages 63 - 64
Figure 314
45 Laterals
Page 76
Figure 325
45 Reducing
Laterals
Page 77
Figure 330
Tee Wyes
Pages 78 - 79
Figure 322
Reducing Tees
Page 69
Figure 331
Reducing Tee Wyes
Page 80
Figures 3D, 5D
& 6D
11 14 to 90
Long Radius Elbows
Pages 57 - 59
Figure 222
Hydrant Tee
Page 69
Figures 391,
392, & 393
BSP Threaded,
Groved and Plain
Adapter Nipples
Page 81
Figure 304
Groove x Male
BSP Thread Nipple
Machined
Page 82
Figure 227
Cross
Page 61
Pages 70 - 72
Figure 305
Groove x Female
BSP Thread Nipple
Machined
Page 82
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
50
www.grinnell.com
GROOVED FITTINGS
Fittings Specifications
Tech Data Sheet: G180
Elbows
90
m
Feet
Elbows
45
m
Feet
Tee
Branch
m
Feet
Tee
Run
m
Feet
0.5
1.6
0.6
1.9
0.7
2.3
1.0
3.2
1.2
3.9
1.2
4.1
1.5
4.9
2.0
6.5
2.0
6.5
2.4
8.0
2.4
8.0
2.5
8.2
2.9
9.5
2.9
9.5
3.0
9.9
4.0
13.1
5.0
16.5
6.1
19.9
7.0
23.0
7.9
25.9
8.8
28.9
10.1
33.1
12.2
40.0
0.2
0.7
0.3
1.0
0.4
1.2
0.5
1.6
0.6
2.0
0.6
2.1
0.7
2.4
1.0
3.3
1.0
3.3
1.3
4.1
1.3
4.1
1.3
4.1
1.4
4.8
1.4
4.8
1.5
5.0
2.0
6.6
2.5
8.3
3.0
9.9
5.5
18.0
6.1
20.0
7.0
23.0
7.9
25.9
9.1
29.9
1.3
4.3
1.5
4.8
1.8
5.8
2.5
8.0
3.0
9.8
3.1
10.3
3.7
12.2
5.0
16.3
5.0
16.3
6.1
20.0
6.1
20.0
6.3
20.5
7.2
23.8
7.2
23.8
7.6
24.8
10.0
32.8
12.6
41.3
15.1
49.7
20.7
67.9
23.8
78.1
25.9
85.0
30.5
100.1
35.1
115.2
0.5
1.6
0.6
1.9
0.7
2.3
1.0
3.2
1.2
3.9
1.2
4.1
1.5
4.9
2.0
6.5
2.0
6.5
2.4
8.0
2.4
8.0
2.5
8.2
2.9
9.5
2.9
9.5
3.0
9.9
4.0
13.1
5.0
16.5
6.1
19.9
7.0
23.0
7.9
25.9
8.8
28.9
10.1
33.1
12.2
40.0
Grooved
Fittings
MATERIAL SPECIFICATIONS
Ductile Iron Fitting Specifications
U-/x->`>`iVvV>v
ductile iron castings, Grade 65-45-12
U/ii-i}]{{n >(65,000 psi)
U9i`-i}] > (45,000 psi)
U
}>x(2"), minimum 12%
U-/xq->`>`iVvV>v`
galvanizing
Coatings
U,i`q i>`>,>`>`
U7iq i>`>,>
Ui`]<V>>i`>
Threads
U -*>`>`
For reducing tee branches, use value corresponding to the branch size.
For example, for a 200 x 200 x 50mm (8" x 8" x 2") tee,
use a branch value of 50mm (2") is 2,5m (8.0').
For sizes not listed, interpolate from the values shown.
Expressed as Equivalent Straight Pipe.
51
GROOVED FITTINGS
Figure 210
90 Elbows
Tech Data Sheet: G180
Grooved
Fittings
Part
Number
210M00034
210M00042
C to E
210M00048
210M00060
210M00073
210M00076
210M00089
210M00108
210M00114
210M00133
210M00139
210M00141
210M00159
210M00165
210M00168
210M00219
210M00273
210M00324
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
25
33.7
1
1.315
32
42.4
1.660
1 1 4
40
48.3
1 1 2
1.900
50
60.3
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
108.0
108,0mm
4.252
100
114.3
4
4.500
125
133.0
133.0mm
5.236
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
159.0
159,0mm
6.260
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
57.0
2.24
69.9
2.75
69.9
2.75
82.6
3.25
95.3
3.75
95.3
3.75
108.0
4.25
121.0
4.76
127.0
5.00
133.0
5.24
139.7
5.50
139.7
5.50
152.0
5.98
165.1
6.50
165.1
6.50
196.9
7.75
228.6
9.00
254.0
10.00
0.4
0.9
0.5
1.0
0.6
1.3
0.8
1.8
1.4
3.1
1.5
3.2
2.2
4.8
3.9
86
3.4
7.5
5.1
11.3
5.1
11.3
5.3
11.6
6.6
14.6
7.7
16.9
7.5
16.6
13.4
29.6
22.0
48.5
30.1
66.4
52
www.grinnell.com
GROOVED FITTINGS
Figures 210LR & 310LR
90 Long Radius Elbows
Tech Data Sheet: G180
Figure 310LR
90 Fabricated Elbow
(Shown)
Grooved
Fittings
C to E
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Part
Number
210LR0060
210LR0073
210LR0076
210LR0089
210LR0114
210LR0139
210LR0141
210LR0165
210LR0168
210LR0219
210LR0273
210LR0324
210LR0355
210LR0406
C to E
mm
Inches
111.3
4.38
127.0
5.00
127.0
5.00
149.4
5.88
190.5
7.50
241.3
9.50
241.3
9.50
273.1
10.75
273.1
10.75
362.0
14.25
438.0
17.24
521.0
20.51
533.4
21.00
609.6
24.00
Part
Number
310T00457
310T00508
310T00610
C to E
mm
Inches
685.8
27.00
838.2
33.00
914.4
36.00
Approx.
Weight
Kg.
Lbs.
118.8
262.0
147.0
324.0
211.4
466.0
53
GROOVED FITTINGS
Figure 201, 301 & 201LR 45 Elbows
Tech Data Sheet: G180
Figure 301
45 Fabricated Elbow
(Full Flow)
Figure 201
45 Cast Elbow
C to E
Grooved
Fittings
Figure 201LR
45 Cast Elbow
(Long Radius)
C to E
C to E
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
0.3
0.7
0.4
0.8
0.4
0.9
0.6
1.3
1.0
2.1
1.0
2.2
1.6
3.5
2.5
5.5
2.5
5.5
3.5
7.7
3.5
7.7
3.7
8.1
5.4
11.9
5.4
11.9
5.4
11.9
8.6
19.0
12.7
28.0
22.0
48.0
45.0
25
33.7
201M00034
1
1.315
1.77
32
42.4
44.5
201M00042
1 1 4
1.660
1.75
40
48.3
44.5
201M00048
1 1 2
1.900
1.75
50
60.3
50.8
201M00060
2
2.375
2.00
65
73.0
57.2
201M00073
2.875
2.25
2 1 2
65
76.1
57.2
201M00076
76,1mm
3.000
2.25
80
88.9
63.5
201M00089
3
3.500
2.50
100
108.0
73.0
201M00108
108,0mm 4.252
2.87
100
114.3
76.2
201M00114
4
4.500
3.00
125
133.0
82.6
201M00133
133.0mm 5.236
3.25
125
139.7
82.6
201M00139
139,7mm
5.500
3.25
125
141.3
82.6
201M00141
5
5.563
3.25
150
159.0
88.9
201M00159
159,0mm 6.260
3.50
150
165.1
88.9
201M00165
165,1mm
6.500
3.50
150
168.3
88.9
201M00168
6
6.625
3.50
200
219.1
108.0
201M00219
8
8.625
4.25
250
273.0
120.7
201M00273
10
10.750
4.75
300
323.9
133.4
201M00324
12
12.750
5.25
350
355.6
379.0
40.1
201LR00355
14
14.000
14.92
88.4
400
406.4
434.0
47.9
201LR00406
16
16.000
17.09
105.6
450
457.2
348.0
66.2
301T00457
18
18.000
13.70
145.9
500
508.0
380.0
81.2
301T00508
20
20.000
14.96
179.0
600
609.6
444.0
115.7
301T00610
24
24.000
17.48
255.1
= 1 for red paint finish, 2 for hot dipped galvanised finish and 5 (201 only) for white paint finish
Note: Fabricated Full Flow 1.5D. C to E Dimensions differ from DIN 2605/01 to allow for insulation.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
54
www.grinnell.com
GROOVED FITTINGS
Figures 212 & 312
22 12 Elbows
Tech Data Sheet: G180
Figure 212
22 12 Cast Elbow
Figure 312
22 12 Fabricated Elbow
C to E
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Part
Number
212A00042
212A00048
212A00060
212A00073
212M00076
212A00089
212A00114
212M00139
212A00141
212A00168
212A00219
Grooved
Fittings
C to E
C to E
mm
Inches
44.5
1.75
44.5
1.75
47.8
1.88
50.8
2.00
50.8
2.00
57.2
2.25
66.8
2.63
73.2
2.88
73.2
2.88
79.5
3.13
98.6
3.88
4.3
9.4
7.7
16.9
Part
Number
312F00165
312F00273
312F00324
312T00355
312T00406
312T00457
312T00508
312T00610
C to E
mm
Inches
79.5
3.13
111.3
4.38
124.0
4.88
127.0
5.00
127.0
5.00
139.7
5.50
152.4
6.00
177.8
7.00
Approx.
Weight
Kg.
Lbs.
4.3
9.4
6.4
14.0
10.0
22.0
20.9
46.0
23.7
52.2
29.5
65.0
36.3
80.0
50.8
112.0
55
GROOVED FITTINGS
Figures 211 & 311
11 14 Elbows
Tech Data Sheet: G180
Figure 211
11 14 Cast Elbow
Figure 311
11 14 Fabricated Elbow
Grooved
Fittings
C to E
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
200
8
250
10
300
12
350
14
400
16
450
18
500
20
C to E
600
609.6
24
24.000
Part
Number
211A00042
211A00048
211A00060
211A00073
211M00076
211A00089
211A00114
211M00139
211A00141
211M00165
211A00168
211A00219
C to E
mm
Inches
35.1
1.38
35.1
1.38
35.1
1.38
38.1
1.50
38.1
1.50
38.1
1.50
44.5
1.75
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
Part
Number
311F00273
311F00324
311F00355
311F00406
311F00457
311F00508
311F00610
C to E
mm
Inches
54.1
2.13
57.2
2.25
88.9
3.50
101.6
4.00
114.3
4.50
127.0
5.00
Approx.
Weight
Kg.
Lbs.
4.1
9.1
7.6
16.7
14.6
32.1
19.1
42.0
24.2
53.2
29.8
65.7
152.4
43.5
6.00
96.0
56
www.grinnell.com
GROOVED FITTINGS
Long Radius 3D Elbows
C to E
C to E
C to E
R = 3D
Figure 310-3D
(90)
R = 3D
C to E
R = 3D
C to E
R = 3D
Grooved
Fittings
C to E
R = 3D
R = 3D
Figure 306-3D
(60)
Figure 301-3D
(45)
Figure 303-3D
(30)
Figure 312-3D
(22.5)
Figure 311-3D
(11.25)
306-3D
60 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
191
2.1
7 1 2
4.7
301-3D
45 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
165
1.9
6 1 2
4.2
303-3D
30 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
146
1.7
5 3 4
3.8
312-3D
22 1 2 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
133
1.6
5 1 4
3.5
311-3D
11 1 4 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
114
1.3
4 1 2
2.9
Nominal
mm
Inches
O.D.
mm
Inches
50
2
60.3
2.375
310-3D
90 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
254
2.4
10
5.3
65
2 1 2
80
3
90
3 1 2
100
4
125
5
150
6
73.0
2.875
88.9
3.500
101.6
4.000
114.3
4.500
141.3
5.563
168.3
6.625
292
11 1 2
330
13
368
14 1 2
406
16
508
20
610
24
4.3
9.5
6.7
14.7
8.4
18.6
10.9
24.1
18.6
40.9
28.9
63.7
210
8 1 4
235
9 1 4
254
10
279
11
349
13 3 4
419
16 1 2
3.7
8.2
5.7
12.6
6.5
14.4
9.3
20.4
15.7
34.5
24.4
53.7
184
7 1 4
197
7 3 4
216
8 1 2
229
9
286
11 14
343
13 1 2
3.4
7.6
5.1
11.2
5.6
12.3
8.1
17.8
13.7
30.1
21.3
46.9
152
6
165
6 1 2
171
6 3 4
184
7 1 4
229
9
273
10 3 4
2.9
6.4
4.4
9.7
4.6
10.2
6.7
14.8
11.3
24.9
17.5
38.6
140
5 1 2
146
5 3 4
152
6
165
6 1 2
203
8
241
9 1 2
2.6
5.8
3.9
8.5
4.2
9.2
6.1
13.4
10.1
22.2
15.5
34.2
121
4 3 4
127
5
127
5
133
5 1 4
165
6 1 2
197
7 3 4
2.2
4.9
3.3
7.3
3.4
7.6
4.8
10.5
8
17.6
12.3
27.1
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
219.1
8.625
273.1
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
813
32
1016
40
1219
48
1422
56
1626
64
1829
72
2032
80
2438
96
58.1
128.0
102.8
226.5
151
332.9
194
427.6
254.1
560.3
322.4
710.7
398.8
879.3
576.2
1270.3
559
22
692
27 14
832
32 3 4
972
38 14
1111
43 3 4
1251
49 14
1391
54 3 4
1664
65 1 2
49.0
108.0
85.9
189.4
126.5
278.8
162.6
358.5
213.2
470.1
270.7
596.9
335.1
738.7
482.4
1,063.6
457
18
572
22 1 2
686
27
800
31 1 2
914
36
1029
40 1 2
1143
45
1365
53 3 4
42.8
94.3
75.7
166.9
111.3
245.3
142.9
315.0
187.2
412.8
237.5
523.7
293.8
647.8
422.3
931.0
368
14 1 2
457
18
552
21 3 4
641
25 14
737
29
826
32 1 2
914
36
1099
43 14
35.7
78.7
62.7
138.2
92.9
204.7
118.6
261.4
151.7
334.5
197.4
435.1
243.3
536.4
351.9
775.7
324
12 3 4
406
16
489
19 14
572
22 1 2
648
25 1 2
730
28 3 4
813
32
972
38 14
31.4
69.3
55.9
123.2
82.4
181.6
106
233.7
137.5
303.2
175
385.7
216.9
478.1
311.8
687.2
267
10 1 2
330
13
394
15 1 2
464
18 14
527
20 3 4
593
23.35
660
26
787
31
25.3
55.7
44.1
97.3
64.3
141.8
83.6
184.4
108.8
239.9
138.1
304.5
171.3
377.7
245.3
540.9
Pipe Size
Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 100mm (4"), are provided with 100mm (4") long integral tangent.
Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.
Grooved or plain-end available; specify choice on order.
Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Elbow bends to conform to above radii.
C to E tolerances: 50 - 150mm (2" - 6") 3,2 mm ( 1 8"); 200 - 400mm (8" - 16") 6,4 mm ( 14"); 450 - 600mm (18" - 24") 9,5mm ( 3 8").
All weights are approximate, based on calculated weight of pipe.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
57
GROOVED FITTINGS
Long Radius 5D Elbows
C to E
C to E
C to E
Grooved
Fittings
C to E
C to E
C to E
R = 5D
R = 5D
R = 5D
R = 5D
R = 5D
Figure 310-5D
(90)
Figure 306-5D
(60)
Figure 301-5D
(45)
Figure 303-5D
(30)
Figure 312-5D
(22.5)
Figure 311-5D
(11.25)
306-5D
60 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
248
2.8
9 3 4
6.1
286
5.1
11 14
11.2
324
7.9
17.5
12 3 4
311
9.1
12 14
20.0
394
13.1
28.9
15 1 2
495
22.3
19 1 2
49.2
591
34.5
76.1
23 14
787
69.4
31
152.9
991
123.6
39
272.5
301-5D
45 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
210
2.5
8 1 4
5.5
235
4.4
9 1 4
9.8
260
6.8
10 14
15.1
286
7.5
11 14
16.5
318
11.5
12 1 2
25.4
394
19.2
15 1 2
42.3
470
29.7
18 1 2
65.5
622
59.3
24 1 2
130.8
781
105.5
30 3 4
232.5
303-5D
30 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
171
2.1
6 3 4
4.6
191
3.8
7 1 2
8.3
203
5.6
8
12.3
222
5.9
8 3 4
13.0
241
9.1
9 1 2
20.1
298
15.3
11 3 4
33.7
356
23.9
14
52.7
476
47.7
18 3 4
105.2
597
84.7
23 1 2
186.8
312-5D
22 1 2 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
152
1.9
6
4.1
165
3.3
6 1 2
7.2
178
4.9
7
10.8
191
5.1
7 1 2
11.3
203
7.8
8
17.1
254
13.1
10
28.9
305
20.4
12
45.0
406
41.1
16
90.5
508
72.7
20
160.3
311-5D
11 1 4 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
127
1.5
5
3.3
133
2.5
5 1 4
5.6
140
3.8
5 1 2
8.3
146
3.9
5 3 4
8.7
152
5.7
6
12.5
191
9.6
7 1 2
21.2
229
14.9
9
32.9
305
30
12
66.2
381
53.2
15
117.2
1187
46 3 4
1384
54 1 2
1581
62 14
1778
70
1975
77 3 4
2369
93 14
940
37
1092
43
1251
49 14
1403
55 14
1562
61 1 2
1873
73 3 4
711
28
832
32 3 4
953
37 1 2
1073
42 14
1187
46 3 4
1429
56 14
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
80
3
90
3 1 2
100
4
125
5
150
6
200
8
250
10
60.3
2.375
73.0
2.875
88.9
3.500
101.6
4.000
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.1
10.750
310-5D
90 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
356
3.3
14
7.2
419
6
16 1 2
13.3
483
9.5
19
21.0
546
12.2
21 1 2
26.9
610
16.1
24
35.4
762
27.2
30
60
914
42.4
36
93.5
1219
85.2
48
187.9
1524
150.9
60
332.6
300
12
350
14
400
16
450
18
500
20
600
24
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
1829
72
2134
84
2438
96
2743
108
3048
120
3658
144
Pipe Size
R = 5D
221.7
488.8
284.7
627.7
373.1
822.5
473.3
1,043.5
585.5
1,290.9
845.7
1,864.4
181.4
400.0
232.8
513.3
304.9
672.2
386.7
852.5
478.2
1,054.2
690.3
1,521.8
155.4
342.7
198.8
438.3
261.1
575.6
330.3
728.2
409.4
902.5
590.8
1,302.5
123.5
272.3
159.1
350.7
208.9
460.6
265.5
585.3
326.9
720.7
473.6
1,044.0
610
24
711
28
813
32
914
36
1016
40
1219
48
106.8
235.5
137.2
302.5
179.8
396.4
229.9
506.9
282.2
622.1
407.6
898.5
457
18
533
21
610
24
686
27
762
30
908
35 3 4
78.1
172.2
100.3
221.2
131.5
289.8
166.8
367.8
206.3
454.9
295.4
651.2
Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 100mm (4"), are provided with 100mm (4") long integral tangent.
Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.
Grooved or plain-end available; specify choice on order.
Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Elbow bends to conform to above radii.
C to E tolerances: 50 - 150mm (2" - 6") 3,2 mm ( 1 8"); 200 - 400mm (8" - 16") 6,4 mm ( 14"); 450 - 600mm (18" - 24") 9,5mm ( 3 8").
All weights are approximate, based on calculated weight of pipe.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
58
www.grinnell.com
GROOVED FITTINGS
Long Radius 6D Elbows
C to E
C to E
C to E
R = 6D
Figure 310-6D
(90)
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
60.3
2.375
73.0
2.875
80
3
90
3 1 2
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
88.9
3.500
101.6
4.000
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.1
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
R = 6D
Figure 306-6D
(60)
C to E
R = 6D
R = 6D
Figure 301-6D
(45)
C to E
Grooved
Fittings
C to E
R = 6D
R = 6D
Figure 303-6D
(30)
Figure 312-6D
(22.5)
Figure 311-6D
(11.25)
310-6D
90 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
406
3.7
16
8.2
483
5.9
19
13.0
306-6D
60 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
279
3.1
11
6.9
324
5.8
12 3 4
12.7
301-6D
45 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
229
2.7
9
6.0
260
5
10 14
11.0
303-6D
30 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
184
2.3
7 1 4
5.0
203
4
8
8.9
312-6D
22 1 2 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
165
2
6 1 2
4.5
178
3.5
7
7.8
311-6D
11 1 4 Elbow
Approx
C to E
Weight
mm
Kg.
Inches
Lbs.
133
1.6
5 1 4
3.6
140
2.7
5 1 2
6.0
559
22
635
25
711
28
889
35
1067
42
1422
56
1778
70
2134
84
2489
98
2845
112
3200
126
3556
140
4267
168
368
14 1 2
413
16 14
457
18
565
22 14
679
26 3 4
908
35 3 4
1137
44 3 4
1359
53 1 2
1588
62 1 2
1816
71 1 2
2045
80 1 2
2267
89 14
2724
107 14
292
11 1 2
324
12 3 4
356
14
445
17 1 2
533
21
711
28
889
35
1060
41 3 4
1238
48 3 4
1416
55 3 4
1594
62 3 4
1772
69 3 4
2127
83 3 4
222
8 3 4
248
9 3 4
267
10 1 2
330
13
400
15 3 4
533
21
660
26
794
31 14
927
36 1 2
1060
41 3 4
1194
47
1327
52 14
1588
62 1 2
191
7 1 2
210
8 1 4
222
8 3 4
279
11
337
13 14
445
17 1 2
559
22
667
26 14
781
30 3 4
895
35 14
1003
39 1 2
1118
44
1329
52.34
146
5 3 4
152
6
165
6 1 2
203
8
241
9 1 2
324
12 3 4
406
16
483
19
565
22 14
648
25 1 2
730
28 3 4
806
31 3 4
972
38 14
10.9
24.1
14.1
31.1
18.6
41.1
31.6
69.6
49.2
108.4
98.8
217.8
174.9
385.6
257.1
566.7
330.1
727.8
432.5
953.6
548.8
1,209.9
678.8
1,496.6
980.5
2,161.6
9.0
19.9
10.3
22.8
15.2
33.6
25.5
56.2
39.8
87.7
80.1
176.7
142
313.1
208
458.5
267.4
589.6
350.8
773.3
445.4
981.9
549.8
1,212.0
795.1
1,752.9
7.8
17.1
8.4
18.6
12.9
28.4
21.8
48.1
33.9
74.8
68.2
150.4
120.8
266.3
176.4
388.9
226.8
499.9
297.3
655.5
377.7
832.7
467.1
1,029.8
675
1,488.2
6.2
13.6
6.5
14.4
10.2
22.5
17.1
37.7
26.9
59.3
54.1
119.2
94.8
208.9
139.5
307.5
179.4
395.4
235.2
518.6
298.7
658.5
369.7
815.0
532.1
1,173.0
5.3
11.7
5.6
12.3
8.6
18.9
14.7
32.3
22.9
50.5
45.5
100.4
81.1
178.8
118.4
261.1
152.8
336.9
200.9
443.0
253.8
559.5
314.8
694.1
450.2
992.5
3.9
8.7
4.2
9.2
6.3
13.8
10.4
22.9
16
35.3
32.4
71.5
57.7
127.1
83.6
184.4
108
238.0
141.9
312.9
180.8
398.7
221.7
488.7
321.7
709.3
Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 100mm (4"), are provided with 100mm (4") long integral tangent.
Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.
Grooved or plain-end available; specify choice on order.
Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Elbow bends to conform to above radii.
C to E tolerances: 50 - 150mm (2" - 6") 3,2 mm ( 1 8"); 200 - 400mm (8" - 16") 6,4 mm ( 14"); 450 - 600mm (18" - 24") 9,5mm ( 3 8").
All weights are approximate, based on calculated weight of pipe.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
59
GROOVED FITTINGS
Figures 219 & 319 Tees
Tech Data Sheet: G180
Pipe Size
Grooved
Fittings
Figure 219
Cast Tee
C to E
C to E
Figure 319
Fabricated Tee
C to E
C to E
Nominal
mm
Inches
O.D.
mm
Inches
Part
Number
25
1
33.7
1.315
219M00034
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
108,0mm
100
4
125
133.0mm
125
139,7mm
125
5
150
159,0mm
150
165,1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
108.0
4.252
114.3
4.500
133.0
5.236
139.7
5.500
141.3
5.563
159.0
6.260
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
219M00042
219M00048
219M00060
219M00073
219M00076
219M00089
219M00108
219M00114
219M00133
219M00139
219M00141
219M00159
219M00165
219M00168
219M00219
219M00273
219M00324
219M00355
219M00406
C to E
mm
Inches
57.0
2.24
Approx
Weight
Kg.
Lbs.
0.5
1.1
69.9
2.75
69.9
2.75
82.6
3.25
95.3
3.75
95.3
3.75
108.0
4.25
121.0
4.76
127.0
5.00
133.0
5.24
139.7
5.50
139.7
5.50
152.0
5.98
165.1
6.50
165.1
6.50
196.9
7.75
228.6
9.00
254.0
10.00
279.0
11.00
305.0
12.00
0.8
1.7
1.0
2.1
1.3
2.8
2.0
4.4
2.9
6.5
2.9
6.5
5.2
11.5
4.8
10.6
4.8
1.6
6.9
15.2
7.0
15.5
6.3
13.9
11.0
24.2
10.4
23.0
19.8
43.7
25.9
57.0
49.9
110.0
61.2
135.0
61.7
136.0
394.0
15.50
438.0
17.25
508.0
20.00
98.9
218.0
125.0
275.0
172.0
379.0
319T00457
319T00508
319T00610
60
www.grinnell.com
GROOVED FITTINGS
Figure 227 Cross
Tech Data Sheet: G180
Grooved
Fittings
Part Number
227M00042
227M00048
227M00060
227M00073
227M00076
227M00089
227M00108
227M00114
222M0139
327F00141
327F00165
227M00168
227M00219
227M002732
227M003242
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
32
42.4
1 1 4
1.660
40
48.3
1.900
1 1 2
50
60.3
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
108.0
108.0mm
4.252
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx
Weight
Kg.
Lbs.
69.9
2.75
69.9
2.75
82.6
3.25
95.3
3.75
95.3
3.75
108.0
4.25
121.0
4.76
127.0
5.00
139.7
5.50
139.7
5.50
165.1
6.50
165.1
6.50
196.9
7.75
228.6
9.00
254.0
10.00
1.0
2.2
1.1
2.5
1.7
3.7
2.6
5.8
2.7
6.0
3.9
8.6
5.3
11.7
9.4
20.7
6.8
15.0
8.0
17.6
12.4
27.3
13.0
28.6
21.7
48.0
34.0
75.0
43.4
95.8
C to E
C to E
61
GROOVED FITTINGS
Figures 260 & 360 End Caps
Tech Data Sheet: G180
Figure 260 Cap
Cast
E to E
E to E
Grooved
Fittings
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
125
159,0mm
150
165,1mm
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
159.0
6.260
165.1
6.500
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Part
Number
260M00034
260M00042
260M00048
260M00060
260M00073
260M00076
260M00089
260M00114
260M00139
260M00141
260M00159
260M00165
260M00168
260M00219
260M00273
260M00324
21.1
0.83
21.1
0.83
21.1
0.83
23.4
0.92
23.4
0.92
21.8
0.86
23.4
0.92
25.4
1.00
23.4
0.92
25.4
1.00
25.0
0.98
23.4
0.92
Approx
Weight
Kg.
Lbs.
0.1
0.2
0.1
0.3
0.2
0.4
0.3
0.7
0.5
1.0
0.6
1.3
0.6
1.4
1.2
2.6
2.1
4.7
2.3
5.0
3.8
8.4
2.9
6.4
25.4
1.00
27.0
1.06
25.8
1.02
25.8
1.02
2.8
6.2
3.2
7.1
11.1
24.5
14.1
31.0
E to E
mm
Inches
Part
Number
Approx
Weight
Kg.
Lbs.
215.9
8.50
228.6
9.00
254.0
10.00
279.4
11.00
317.5
12.50
16.6
36.5
19.7
43.5
25.6
57.0
34.3
75.7
45.8
101.0
E to E
mm
Inches
360T00355
360T00406
360T00457
360T00508
360T00610
= 1 for red paint (RAL 3000) finish, 2 for hot dipped galvanised finish
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
62
www.grinnell.com
GROOVED FITTINGS
Figures 361, 362, 363, 364 & 365
End Caps with ISO R7 Threaded Outlets
(Page 1 of 2)
Pipe Size
E to E
mm
In.
Nominal
mm
In.
O.D.
mm
In.
50
2
65
76.1mm
80
3
100
4
125
139.7mm
125
5
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
25
0.98
25
0.98
25
0.98
25
0.98
25
0.98
25
0.98
150
165.1mm
150
6
165.1
6.500
168.3
6.625
25
0.98
25
0.98
200
219.1
31
8.625
1.22
53
2.09
54
2.13
DN20
3
4
DN20
3
4
79
DN20
3.11
Grooved
Fittings
Approx.
Weight
Kg.
Lbs.
0.2
0.4
0.4
0.9
0.5
1.1
1.3
2.9
1.8
4.0
1.8
4.0
2.7
6.0
2.7
6.0
5.0
11.0
E to E
= 1 for red paint (RAL 3000) finish, 2 for hot dipped galvanised finish
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page
15 or contact a GRINNELL Sales Representative.
Pipe Size
E to E
mm
In.
Nominal
mm
In.
O.D.
mm
In.
50
2
65
76.1mm
80
3
100
4
125
139.7mm
125
5
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
25
0.98
25
0.98
25
0.98
25
0.98
25
0.98
25
0.98
150
165.1mm
150
6
165.1
6.500
168.3
6.625
25
0.98
25
0.98
200
219.1
31
8.625
1.22
Approx.
Weight
Kg.
Lbs.
0.2
0.4
0.4
0.9
0.5
1.1
1.3
2.9
1.8
4.0
1.8
4.0
53
2.09
54
2.13
DN25
1
DN25
1
2.7
6.0
2.7
6.0
79
DN25
5.0
3.11
11.0
365M00165
365M00168
365M00219
Approx.
Weight
Kg.
Lbs.
0.2
0.4
0.4
0.9
0.5
1.1
1.3
2.9
1.8
4.0
-
53
2.09
54
2.13
DN32
1 1 4
DN32
1 1 4
2.7
6.0
2.7
6.0
79
DN32
5.0
3.11
1 1 4
11.0
= 1 for red paint (RAL 3000) finish, 2 for hot dipped galvanised finish
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
63
GROOVED FITTINGS
Figures 361, 362, 363, 364 & 365
End Caps with ISO R7 Threaded Outlets
(Page 2 of 2)
Grooved
Fittings
E to E
C
Pipe Size
E to E
mm
In.
Nominal
mm
In.
O.D.
mm
In.
50
2
65
76.1mm
80
3
100
4
125
139.7mm
125
5
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
25
0.98
25
0.98
25
0.98
25
0.98
25
0.98
25
0.98
150
165.1mm
150
6
165.1
6.500
168.3
6.625
25
0.98
25
0.98
200
219.1
31
8
250
10
8.625
273.0
10.750
1.22
31
1.22
Approx.
Weight
Kg.
Lbs.
0.2
0.4
0.4
0.9
0.5
1.1
1.3
2.9
1.8
4.0
1.8
4.0
53
2.09
54
2.13
DN40
1 1 2
DN40
1 1 2
2.7
6.0
2.7
6.0
79
DN40
5.0
3.11
90
3.54
1 2
DN40
1 1 2
11.0
7.2
15.9
Part
Number
362M00076
362M00089
362M00114
362M00139
362M00141
362M00165
362M00168
362M00219
362M00273
Approx.
Weight
Kg.
Lbs.
0.3
0.7
1.3
2.9
1.3
2.9
1.8
4.0
1.8
4.0
47
1.85
48
1.89
DN50
2
DN50
2
2.7
6.0
2.7
6.0
73
DN50
5.0
2.87
90
3.54
2
DN50
2
11.0
7.2
15.9
= 1 for red paint (RAL 3000) finish, 2 for hot dipped galvanised finish
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
64
www.grinnell.com
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 1 of 4)
Tech Data Sheet: G180
Grooved
Fittings
C to E
C to E
C to E
C to E
Figure 221 Reducing Tee Cast
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50 x 50 x 25
2x2x1
50 x 50 x 40
2 x 2 x 1 1 2
65 x 65 x 50
2 1 2 x 2 1 2 x 2
65 x 65 x 40
76,1mm x 76,1mm x 1 1 2
65 x 65 x 50
76,1mm x 76,1mm x 2
80 x 80 x 25
3x3x1
80 x 80 x 40
3 x 3 x 1 1 2
80 x 80 x 50
3x3x2
80 x 80 x 65
3 x 3 x 2 1 2
80 x 80 x 65
3 x 3 x 76,1mm
100 x 100 x 50
4x4x2
100 x 100 x 65
4 x 4 x 2 1 2
100 x 100 x 65
4 x 4 x 76,1mm
100 x 100 x 80
4x4x3
125 x 125 x 80
139,7 x 139,7 x 76,1mm
125 x 125 x 80
139,7 x 139,7mm x 3
Part
Number
221M02015
221M02520
221M02615
221M02620
221M03010
221A03015
221M03020
221M03025
221M03026
221M04220
221M04225
221M04226
221M04230
221M05230
C to E
mm
Inches
82.6
3.25
95.3
3.75
95.3
3.75
95.3
3.75
108.0
4.25
108.0
4.25
108.0
4.25
108.0
4.25
108.0
4.25
127.0
5.00
127.0
5.00
127.0
5.00
127.0
5.00
139.7
5.50
Approx.
Weight
Kg.
Lbs.
1.2
2.7
1.9
4.2
2.0
4.5
2.0
4.3
2.5
5.6
2.7
5.9
2.7
6.0
2.8
6.2
2.7
6.0
4.1
9.1
4.3
9.5
4.3
9.5
4.4
9.7
5.8
12.7
139.7
6.6
321F05226
5.50
14.5
65
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 2 of 4)
Tech Data Sheet: G180
Grooved
Fittings
C to E
C to E
Figure 221 Reducing Tee
Cast
C to E
C to E
Pipe Size
66
Nominal
mm
Inches
O.D.
mm
Inches
Part
Number
221M05242
221A05325
221A05330
221A05342
221M06230
221M06242
221M06320
221M06325
221M06326
221M06330
221M06342
221M06352
221A08042
221M08052
221M08062
221A08063
221M01142
221M01163
C to E
mm
Inches
139.7
5.50
139.7
5.50
139.7
5.50
139.7
5.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
196.9
7.75
196.9
7.75
196.9
7.75
196.9
7.75
228.6
9.00
228.6
9.00
Approx.
Weight
Kg.
Lbs.
6.1
13.4
8.2
18.0
6.4
14.0
6.3
13.9
8.2
18.0
8.9
19.5
8.8
19.4
9.8
21.2
9.8
21.2
9.5
21.0
9.9
21.8
10.4
23.0
16.9
37.2
17.1
37.7
17.1
37.7
17.0
37.4
29.9
65.9
30.8
67.9
165.1
11.9
321F06220
6.50
26.2
165.1
12.1
321F06226
6.50
26.7
228.6
26.2
321F01152
9.00
57.8
228.6
26.2
321F01162
9.00
57.8
228.6
27.2
9.00
66.0
www.grinnell.com
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 3 of 4)
Tech Data Sheet: G180
Grooved
Fittings
C to E
C to E
Figure 221 Reducing Tee
Cast
C to E
C to E
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
Part
Number
221M01180
C to E
mm
Inches
228.6
9.00
Approx.
Weight
Kg.
Lbs.
31.8
70.1
9.00
62.0
254.0
40.0
321F01330
10.00
88.2
254.0
40.0
321F01342
10.00
88.2
254.0
40.0
321F01352
10.00
88.2
254.0
36.7
321F01362
10.00
80.9
254.0
36.7
321F01363
10.00
80.9
254.0
34.6
321F01380
10.00
76.3
254.0
35.2
321F01311
10.00
77.6
279.4
46.9
321T01442
11.00
103.3
279.4
46.9
321T01463
11.00
103.3
279.4
46.9
321T01480
11.00
103.4
279.4
47.3
321T01411
11.00
104.3
279.4
47.8
321T01413
11.00
105.3
304.8
59.2
321T01642
12.00
130.5
59.2
304.8
321T01663
12.00
130.5
304.8
59.2
321T01680
12.00
130.5
304.8
58.6
321T01611
12.00
129.3
304.8
59.1
321T01613
12.00
130.2
304.8
63.7
321T01614
12.00
140.4
393.7
87.4
321T01863
15.50
192.7
393.7
87.4
321T01880
15.50
192.7
393.7
87.8
321T01811
15.50
193.6
67
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 4 of 4)
Tech Data Sheet: G180
Grooved
Fittings
C to E
C to E
Figure 221 Reducing Tee
Cast
C to E
C to E
Pipe Size
Nominal
mm
Inches
Part
Number
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
18 x 18 x 12
18.000 x 18.000 x 12.750
18 x 18 x 14
18.000 x 18.000 x 14.000
18 x 18 x 16
18.000 x 18.000 x 16.000
20 x 20 x 6
20.000 x 20.000 x 6.625
20 x 20 x 8
20.000 x 20.000 x 8.625
20 x 20 x 10
20.000 x 20.000 x 10.750
20 x 20 x 12
20.000 x 20.000 x 12.750
20 x 20 x 14
20.000 x 20.000 x 14.000
20 x 20 x 16
20.000 x 20.000 x 16.000
20 x 20 x 18
20.000 x 20.000 x 18.000
24 x 24 x 8
24.000 x 24.000 x 8.625
24 x 24 x 10
24.000 x 24.000 x 10.750
24 x 24 x 12
24.000 x 24.000 x 12.750
24 x 24 x 14
24.000 x 24.000 x 14.000
24 x 24 x 16
24.000 x 24.000 x 16.000
24 x 24 x 18
24.000 x 24.000 x 18.000
24 x 24 x 20
24.000 x 24.000 x 20.000
68
www.grinnell.com
GROOVED FITTINGS
Figure 322 Reducing Tees
(Groove x Groove x Female BSP Thread)
Grooved
Fittings
C to E
C to E
Pipe Size
Part
Number
Nominal
mm
Inches
50 x 50 x 50
2x2x2
65 x 65 x 50
76.1 x 76.1mm x 2
65 x 65 x 50
76.1 x 76.1 x 76.1mm
80 x 80 x 50
3x3x2
80 x 80 x 65
3 x 3 x 2 1 2
100 x 100 x 50
4x4x2
100 x 100 x 65
4 x 4 x 76.1mm
322F020202
322F026202
322F026252
322F030202
322F030252
322F042202
322F042262
O.D.
mm
Inches
60.3 x 60.3 x 60.3 ISO R7
2.375 x 2.375 x 2.375
76.1 x 76.1 x 60.3 ISO R7
3.000 x 3.000 x 2.375
76.1 x 76.1 x 76.1 ISO R7
3.000 x 3.000 x 3.000
88.9 x 88.9 x 60.3 ISO R7
3.500 x 3.500 x 2.375
88.9 x 88.9 x 73.0 ISO R7
3.500 x 3.500 x 2.875
114.3 x 114.3 x 60.3 ISO R7
4.500 x 4.500 x 2.375
114.3 x 114.3 x 76.1 ISO R7
4.500 x 4.500 x 3.00
C to GE &
C to TE
mm
Inches
Approx. Weight
Kg.
Lbs.
82.6
3.25
95.2
3.75
95.2
3.75
108.0
4.25
108.0
4.25
127.0
5.00
127.0
5.00
1.2
2.6
1.8
4.0
1.9
4.2
2.2
4.9
2.3
5.1
2.6
5.7
2.8
6.2
Part
Number
22V42262
Pipe Size
Nominal
Pipe
Size
OD
DN
mm
In.
In.
100
114.3
4
4.500
Hydrant
Outlet
ISO
Max. Working
Pressure
psi
Bar
A
mm
In.
B
mm
In.
C
mm
In.
Approx.
Weight
Kg.
Lbs.
R7
DN65
20.7
300
190
7.48
70
2.76
133
5.24
4.6
10.1
69
GROOVED FITTINGS
Figures 250 & 350 Concentric Reducers
(Page 1 of 3)
Tech Data Sheet: G180
E to E
E to E
Grooved
Fittings
Figure 350
Concentric Reducer Fabricated
Figure 250
Concentric Reducer Cast
Pipe Size
70
Nominal
DN
In.
O.D.
mm
In.
32 x 25
1- 14 x 1
40 x 25
1- 1 2 x 1
40 x 32
1- 1 2 x 1- 14
50 x 25
2x1
50 x 32
2 x 1- 14
50 x 40
2 x 1- 1 2
65 x 25
2- 1 2 x 1
65 x 50
2- 1 2 x 2
65 x 32
76.1mm x 1- 14
65 x 40
76.1mm x 1- 1 2
65 x 50
76.1mm x 2
80 x 40
3 x 1- 1 2
80 x 50
3x2
80 x 65
3 x 2- 1 2
80 x 65
3 x 76.1mm
100 x 50
4x2
100 x 65
4 x 2- 1 2
100 x 65
4 x 76.1mm
100 x 80
4x3
100 x 100
4 x 108.0mm
125 x 80
139.7mm x 3
125 x 100
139.7mm x 4
125 x 100
5x4
150 x 80
165.1mm x 3
150 x 100
165.1mm x 4
42.4 x 33.7
1.660 x 1.315
48.3 x 33.7
1.900 x 1.315
48.3 x 42.4
1.900 x 1.660
60.3 x 33.7
2.375 x 1.315
60.3 x 42.4
2.375 x 1.660
60.3 x 48.3
2.375 x 1.900
73.0 x 33.7
2.875 x 1.315
73.0 x 60.3
2.875 x 2.375
76.1 x 42.4
3.000 x 1.660
76.1 x 48.3
3.000 x 1.900
76.1 x 60.3
3.000 x 2.375
88.9 x 48.3
3.500 x 1.900
88.9 x 60.3
3.500 x 2.375
88.9 x 73.0
3.500 x 2.875
88.9 x 76.1
3.500 x 3.000
114.3 x 60.3
4.500 x 2.375
114.3 x 73.0
4.500 x 2.875
114.3 x 76.1
4.500 x 3.000
114.3 x 88.9
4.500 x 3.500
114.3 x 108.0
4.500 x 4.252
139.7 x 88.9
5.500 x 3.500
139.7 x 114.3
5.500 x 4.500
141.3 x 114.3
5.563 x 4.500
165.1 x 88.9
6.500 x 3.500
165.1 x 114.3
6.500 x 4.500
Part
Number
250M01210
250M01510
250A01512
250M02010
250M02012
250M02015
250M02520
250M02612
250M02615
250M02620
250A03015
250M03020
250M03025
250M03026
250M04220
250M04225
250M04226
250M04230
250M05230
250M05242
250M05342
250M06230
250M06242
E to E
mm
In.
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
63.5
2.50
76.2
3.00
76.2
3.00
76.2
3.00
76.2
3.00
88.9
3.50
88.9
3.50
88.9
3.50
101.6
4.00
101.6
4.00
Approx.
Weight
kg
Lbs.
0.3
0.7
0.3
0.7
0.3
0.8
0.4
0.9
0.4
0.9
0.5
1.0
0.6
1.3
0.6
1.4
0.6
1.4
0.7
1.5
0.8
1.8
0.8
1.7
0.8
1.7
0.9
2.0
1.1
2.4
1.2
2.7
1.5
3.2
1.3
2.8
1.9
4.2
2.0
4.4
2.0
4.4
2.5
5.5
2.7
6.0
63.5
0.5
350F02610
2.50
1.2
140.0
1.5
350F04241
5.51
3.3
www.grinnell.com
GROOVED FITTINGS
Figures 250 & 350 Concentric Reducers
(Page 2 of 3)
Tech Data Sheet: G180
E to E
E to E
Figure 250
Cast Concentric
Reducer
Figure 350
Fabricated Concentric
Reducer
Grooved
Fittings
Pipe Size
Nominal
DN
In.
O.D.
mm
In.
150 x 125
165.1 x 139.7mm
150 x 50
6x2
150 x 65
6 x 76.1mm
150 x 80
6x3
150 x 100
6x4
150 x 125
6 x 139.7mm
150 x 125
6x5
150 x 125
6 x 159.0mm
150 x 150
6 x 165.1mm
200 x 100
8x4
200 x 125
8 x 139.7mm
200 x 125
8x5
165.1 x 139.7
6.500 x 5.500
168.3 x 60.3
6.625 x 2.375
168.3 x 76.1
6.625 x 3.000
168.3 x 88.9
6.625 x 3.500
168.3 x 114.3
6.625 x 4.500
168.3 x 139.7
6.625 x 5.500
168.3 x 141.3
6.625 x 5.563
168.3 x 159.0
6.625 x 6.260
168.3 x 165.1
6.625 x 6.500
219.1 x 114.3
8.625 x 4.500
219.1 x 139.7
8.625 x 5.500
219.1 x 141.3
8.625 x 5.563
200 x 150
8 x 165.1mm
200 x 150
8x6
250 x 100
10 x 4
250 x 125
10 x 139.7mm
250 x 150
10 x 165.1mm
250 x 150
10 x 6
250 x 200
10 x 8
300 x 100
12 x 4
300 x 150
12 x 165.1mm
300 x 150
12 x 6
300 x 200
12 x 8
300 x 250
12 x 10
350 x 150
14 x 165.1mm
350 x 150
14 x 6
350 x 200
14 x 8
219.1 x 165.1
8.625 x 6.500
219.1 x 168.3
8.625 x 6.625
273.0 x 114.3
10.750 x 4.500
273.0 x 139.7
10.750 x 5.500
273.0 x 165.1
10.750 x 6.500
273.0 x 168.3
10.750 x 6.625
273.0 x 219.1
10.750 x 8.625
323.9 x 114.3
12.750 x 4.500
323.9 x 165.1
12.750 x 6.500
323.9 x 168.3
12.750 x 6.625
323.9 x 219.1
12.750 x 8.625
323.9 x 273.0
12.750 x 10.750
355.6 x 165.1
14.000 x 6.500
355.6 x 168.3
14.000 x 6.625
355.6 x 219.1
14.000 x 8.625
Part
Number
250M06252
250M06320
250M06326
250A06330
250M06342
250M06352
250M06353
250A08042
250M08052
250M08062
250A08063
250M01162
250A01163
250A01180
250A01342
250A01363
250A01380
250A01311
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
127.0
5.00
127.0
5.00
127.0
5.00
Approx.
Weight
kg
Lbs.
2.5
5.6
2.7
6.1
2.7
6.1
2.6
5.8
2.7
6.0
2.3
6.3
2.8
6.2
4.9
10.7
4.5
10.0
4.9
10.8
127.0
5.00
127.0
5.00
152.4
6.00
152.4
6.00
152.4
6.00
177.8
7.00
177.8
7.00
177.8
7.00
177.8
7.00
5.0
11.0
5.1
11.3
8.0
17.8
7.4
16.3
8.3
18.3
10.3
22.7
11.0
24.2
11.7
25.8
12.8
28.2
E to E
mm
In.
140.0
3.2
350F06361
5.00
7.1
127.0
5.5
350F06362
5.00
12.1
350F08053
350F01142
350F01152
350F01362
350T01462
350T01463
350T01480
152.4
6.00
152.4
6.00
303.0
7.00
330.2
13.0
330.2
13.0
330.2
13.0
9.3
20.5
9.1
20.1
11.3
24.9
24.6
54.3
24.6
54.3
24.7
54.5
71
GROOVED FITTINGS
Figures 250 & 350 Concentric Reducers
(Page 3 of 3)
Tech Data Sheet: G180
E to E
E to E
Figure 250
Cast Concentric
Reducer
Grooved
Fittings
Pipe Size
Figure 350
Fabricated Concentric
Reducer
Nominal
DN
In.
O.D.
mm
In.
350 x 250
14 x 10
350 x 300
14 x 12
400 x 200
16 x 8
400 x 250
16 x 10
400 x 300
16 x 12
400 x 350
16 x 14
450 x 300
18 x 12
450 x 350
18 x 14
450 x 400
18 x 16
500 x 250
20 x 10
500 x 300
20 x 12
500 x 350
20 x 14
500 x 400
20 x 16
500 x 450
20 x 18
600 x 250
24 x 10
600 x 300
24 x 12
600 x 350
24 x 14
600 x 400
24 x 16
600 x 450
24 x 18
600 x 500
24 x 20
355.6 x 273.0
14.000 x 10.750
355.6 x 323.9
14.000 x 12.750
406.4 x 219.1
16.000 x 8.625
406.4 x 273.0
16.000 x 10.750
406.4 x 323.9
16.000 x 12.750
406.4 x 355.6
16.000 x 14.000
457.2 x 323.9
18.000 x 12.750
457.2 x 355.6
18.000 x 14.000
457.2 x 406.4
18.000 x 16.000
508.0 x 273.0
20.000 x 10.750
508.0 x 323.9
20.000 x 12.750
508.0 x 355.6
20.000 x 14.000
508.0 x 406.4
20.000 x 16.000
508.0 x 457.2
20.000 x 18.000
609.6 x 273.0
24.000 x 10.750
609.6 x 323.9
24.000 x 12.750
609.6 x 355.6
24.000 x 14.000
609.6 x 406.4
24.000 x 16.000
609.6 x 457.2
24.000 x 18.000
609.6 x 508.0
24.000 x 20.000
Part
Number
E to E
mm
In.
Approx.
Weight
kg
Lbs.
72
www.grinnell.com
GROOVED FITTINGS
Figures 251 & 351 Eccentric Reducers
(Page 1 of 3)
Tech Data Sheet: G180
E to E
E to E
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
Figure 251
Cast Eccentric Reducer
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50 x 25
2x1
50 x 32
2 x 1 1 4
50 x 40
2 x 1 1 2
65 x 40
76,1mm x 1 1 2
65 x 50
76,1mm x 2
80 x 50
3x2
80 x 65
3 x 2 1 2
80 x 65
3 x 76,1mm
100 x 50
4x2
100 x 65
4 x 2 1 2
100 x 65
4 x 76,1mm
100 x 80
4x3
125 x 80
139.7mm x 3
125 x 100
139.7mm x 4
125 x 100
5x4
150 x 50
165,1mm x 2
150 x 80
165,1mm x 3
150 x 100
165,1mm x 4
150 x 100
165,1 x 139.7mm
150 x 50
6x2
150 x 80
6x3
60.3 x 33.7
2.375 x 1.315
60.3 x 42.4
2.375 x 1.660
60.3 x 48.3
2.375 x 1.900
76.1 x 48.3
3.000 x 1.900
76.1 x 60.3
3.000 x 2.375
88.9 x 60.3
3.500 x 2.375
88.9 x 73.0
3.500 x 2.875
88.9 x 76.1
3.500 x 3.000
114.3 x 60.3
4.500 x 2.375
114.3 x 73.0
4.500 x 2.875
114.3 x 76.1
4.500 x 3.000
114.3 x 88.9
4.500 x 3.500
139.7 x 88.9
5.500 x 3.500
139.7 x 114.3
5.500 x 4.500
141.3 x 114.3
5.563 x 4.500
165.1 x 60.3
6.500 x 2.375
165.1 x 88.9
6.500 x 3.500
165.1 x 114.3
6.500 x 4.500
165.1 x 139.7
6.500 x 5.500
168.3 x 60.3
6.625 x 2.375
168.3 x 88.9
6.625 x 3.500
Grooved
Fittings
Part
Number
251A03020
251A03025
251A04220
251A04225
251A04230
251A05342
251A06330
E to E
mm
Inches
88.9
3.5
88.9
3.5
101.6
4.0
101.6
4.0
101.6
4.0
127.5
5.0
139.7
5.5
Approx.
Weight
Kg.
Lbs.
0.9
2.0
1.0
2.2
1.4
3.0
1.4
3.1
1.5
3.3
2.6
5.7
3.4
7.4
241.3
2.8
351F03026
9.5
6.1
254.0
3.7
351F04226
10.0
8.2
279.4
5.7
351F05230
11.0
12.6
279.4
5.9
351F05242
11.0
13.0
292.1
6.7
351F06220
11.5
14.8
292.1
6.2
351F06230
11.5
14.7
292.1
7.1
351F06242
11.5
14.9
292.1
7.2
351F06252
11.5
15.9
292.1
5.5
351F06320
11.5
12.2
73
GROOVED FITTINGS
Figures 251 & 351 Eccentric Reducers
(Page 2 of 3)
Tech Data Sheet: G180
E to E
E to E
Pipe Size
74
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
Figure 251
Cast Eccentric Reducer
Grooved
Fittings
Nominal
mm
Inches
O.D.
mm
Inches
150 x 100
6x4
150 x 125
6 x 139.7mm
150 x 125
6x5
200 x 80
8x3
200 x 100
8x4
200 x 125
8 x 139.7mm
200 x 125
8x5
200 x 150
8 x 165,1mm
200 x 150
8x6
250 x 100
10 x 4
250 x 125
10 x 139.7mm
250 x 125
10 x 5
250 x 150
10 x 165,1mm
250 x 150
10 x 6
250 x 200
10 x 8
300 x 100
12 x 4
300 x 150
12 x 165,1mm
300 x 150
12 x 6
300 x 200
12 x 8
300 x 250
12 x 10
350 x 150
14 x 165,1mm
350 x 150
14 x 6
168.3 x 114.3
6.625 x 4.500
168.3 x 139.7
6.625 x 5.500
168.3 x 141.3
6.625 x 5.563
219.1 x 88.9
8.625 x 3.500
219.1 x 114.3
8.625 x 4.500
219.1 x 139.7
8.625 x 5.500
219.1 x 141.3
8.625 x 5.563
219.1 x 165.1
8.625 x 6.500
219.1 x 168.3
8.625 x 6.625
273.0 x 114.3
10.750 x 4.500
273.0 x 139.7
10.750 x 5.500
273.0 x 141.3
10.750 x 5.563
273.0 x 165.1
10.750 x 6.500
273.0 x 168.3
10.750 x 6.625
273.0 x 219.1
10.750 x 8.625
323.9 x 114.3
12.750 x 4.500
323.9 x 165.1
12.750 x 6.500
323.9 x 168.3
12.750 x 6.625
323.9 x 219.1
12.750 x 8.625
323.9 x 273.0
12.750 x 10.750
355.6 x 165.1
14.000 x 6.500
355.6 x 168.3
14.000 x 6.625
Part
Number
251A06342
251A06353
E to E
mm
Inches
139.7
5.5
139.7
5.5
Approx.
Weight
Kg.
Lbs.
3.4
7.5
3.7
8.1
292.1
7.2
351F06352
11.5
15.9
304.8
8.1
351F08030
12.0
17.9
304.8
9.8
351F08042
12.0
19.7
304.8
9.7
351F08052
12.0
21.4
304.8
9.7
351F08053
12.0
21.4
304.8
10.9
351F08062
12.0
24.0
304.8
10.9
351F08063
12.0
24.0
330.2
13.5
351F01142
13.0
29.7
330.2
14.4
351F01152
13.0
31.7
330.2
14.4
351F01153
13.0
31.7
330.2
15.4
351F01162
13.0
34.0
330.2
15.4
351F01163
13.0
34.0
15.6
330.2
351F01180
13.0
34.4
355.6
20.3
351F01342
14.0
44.8
355.6
20.5
351F01362
14.0
45.2
355.6
20.5
351F01363
14.0
45.2
355.6
21.6
351F01380
14.0
47.7
355.6
23.6
351F01411
14.0
52.0
482.6
35.4
351T01462
19.0
78.0
482.6
35.4
351T01463
19.0
78.0
www.grinnell.com
GROOVED FITTINGS
Figures 251 & 351 Eccentric Reducers
(Page 3 of 3)
Tech Data Sheet: G180
E to E
E to E
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
Figure 251
Cast Eccentric Reducer
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
350 x 200
14 x 8
350 x 250
14 x 10
350 x 300
14 x 12
400 x 200
16 x 8
400 x 250
16 x 10
400 x 300
16 x 12
400 x 350
16 x 14
450 x 300
18 x 12
450 x 350
18 x 14
450 x 400
18 x 16
500 x 250
20 x 10
500 x 300
20 x 12
500 x 350
20 x 14
500 x 400
20 x 16
500 x 450
20 x 18
600 x 250
24 x 10
600 x 300
24 x 12
600 x 350
24 x 14
600 x 400
24 x 16
600 x 450
24 x 18
600 x 500
24 x 20
355.6 x 219.1
14.000 x 8.625
355.6 x 273.0
14.000 x 10.750
355.6 x 323.9
14.000 x 12.750
406.4 x 219.1
16.000 x 8.625
406.4 x 273.0
16.000 x 10.750
406.4 x 323.9
16.000 x 12.750
406.4 x 355.6
16.000 x 14.000
457.2 x 323.9
18.000 x 12.750
457.2 x 355.6
18.000 x 14.000
457.2 x 406.4
18.000 x 16.000
508.0 x 273.0
20.000 x 10.750
508.0 x 323.9
20.000 x 12.750
508.0 x 355.6
20.000 x 14.000
508.0 x 406.4
20.000 x 16.000
508.0 x 457.2
20.000 x 18.000
609.6 x 273.0
24.000 x 10.750
609.6 x 323.9
24.000 x 12.750
609.6 x 355.6
24.000 x 14.000
609.6 x 406.4
24.000 x 16.000
609.6 x 457.2
24.000 x 18.000
609.6 x 508.0
24.000 x 20.000
Part
Number
E to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
Grooved
Fittings
75
GROOVED FITTINGS
Figure 314 45 Laterals
Tech Data Sheet: G180
Grooved
Fittings
C to LE
C to SE
Part Number
314F00034
314F00042
314F00048
314F00060
314F00076
314F00089
314F00114
314F00139
314F00165
314F00168
314F00219
314F00273
314F00324
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
25
33.7
1
1.315
32
42.4
1.660
1 1 4
40
48.3
1 1 2
1.900
50
60.3
2
2.375
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to LE
C to LE
mm
Inches
C to SE
mm
Inches
Approx.
Weight
Kg.
Lbs.
127.0
5.00
146.1
5.75
158.8
6.25
177.8
7.00
196.9
7.75
215.9
8.50
266.7
10.50
317.5
12.50
355.6
14.00
355.6
14.00
457.2
18.00
520.7
20.50
584.2
23.00
57.0
2.24
63.5
2.50
69.9
2.75
69.9
2.75
76.2
3.00
82.6
3.25
95.3
3.75
102.0
4.00
114.3
4.50
114.3
4.50
152.4
6.00
165.71
6.50
177.8
7.00
0.7
1.5
1.11
2.4
1.6
3.5
2.0
4.4
4.5
9.9
5.0
11.0
8.3
18.3
13.6
30.0
21.1
46.5
21.1
46.5
37.6
82.9
57.4
126.5
74.8
164.9
76
www.grinnell.com
GROOVED FITTINGS
Figure 325 45 Reducing Laterals
Tech Data Sheet: G180
Pipe Size
C to LE C to SE Approx.
Weight
Nominal
O.D.
mm
mm
Kg.
mm
mm
Inches Inches
Lbs.
Inches
Inches
80 x 50
88.9 x 60.3
215.9
82.6
4.1
325F03020
3x2
3.500 x 2.375
8.50
3.25
9.0
80 x 76.1
88.9 x 76.1
216.0
83.0
5.2
325F03026
3 x 76,1mm
3.500 x 3.000
8.50
3.25
11.5
100 x 50
114.3 x 60.3
266.7
95.3
6.7
325F04220
4x2
4.500 x 2.375
10.50
3.75
14.7
100 x 65
114.3 x 76.1
267.0
95.0
7.7
325F04226
4 x 76,1mm
4.500 x 3.000
10.50
3.75
16.9
100 x 80
114.3 x 88.9
266.7
95.3
7.7
325F04230
4x3
4.500 x 3.500
10.50
3.75
16.9
125 x 50
139.7 x 60.3
318.1
102.0
10.2
325F05220
139,7mm x 2
5.500 x 2.375
12.50
4.00
22.4
125 x 80
139.7 x 88.9
318.0
102.0
12.0
325F05230
139,7mm x 3
5.500 x 3.500
12.50
4.00
26.5
125 x 100
139.7 x 114.3
318.0
102.0
13.8
325F05242
139,7mm x 4
5.500 x 4.500
12.50
4.00
30.4
150 x 50
165.1 x 60.3
356.0
114.0
15.0
325F06220
165,1mm x 2
6.500 x 2.375
14.00
4.50
33.1
150 x 80
165.1 x 88.9
356.0
114.0
16.8
325F06230
165,1mm x 3
6.500 x 3.500
14.00
4.50
37.0
150 x 100
165.1 x 114.3
356.0
114.0
18.1
325F06242
165,1mm x 4
6.500 x 4.500
14.00
4.50
39.9
150 x 125
165.1 x 139.7
356.0
114.0
20.4
325F06252
165,1 x 139,7mm
6.500 x 5.500
14.00
4.50
45.0
150 x 50
168.3 x 60.3
355.6
114.3
14.4
325F06320
6x2
6.625 x 2.375
14.00
4.50
31.7
150 x 80
168.3 x 88.9
355.6
114.3
15.6
325F06330
6x3
6.625 x 3.500
14.00
4.50
34.4
150 x 100
168.3 x 114.3
355.6
114.3
16.6
325F06342
6x4
6.625 x 4.500
14.00
4.50
36.5
150 x 125
168.3 x 139.7
356.0
114.0
20.4
325F06352
6 x 139,7mm
6.625 x 5.500
14.00
4.50
45.0
200 x 100
219.1 x 114.1
457.2
152.4
26.7
325F08042
8x4
8.625 x 4.500
18.00
6.00
58.9
200 x 125
219.1 x 139.7
457.0
152.0
30.8
325F08052
8 x 139,7mm
8.625 x 5.500
18.00
6.00
67.9
200 x 150
219.1 x 168.3
457.2
152.4
30.0
325F08063
8x6
8.625 x 6.625
18.00
6.00
66.1
250 x 100
273.0 x 114.3
520.7
165.1
39.6
325F01042
10 x 4
10.750 x 4.500
20.50
6.50
87.3
250 x 125
273.0 x 139.7
521.0
165.0
45.4
325F01052
10 x 139,7mm
10.750 x 5.500
20.50
6.50
100.1
250 x 150
273.0 x 168.3
520.7
165.1
43.0
325F01063
10 x 6
10.750 x 6.625
20.50
6.50
94.7
250 x 200
273.0 x 219.1
520.7
165.1
45.0
325F01080
10 x 8
10.750 x 8.625
20.50
6.50
99.2
300 x 100
323.9 x 114.3
584.2
177.8
54.7
325F01242
12 x 4
12.750 x 4.500
23.00
7.00
120.6
300 x 150
323.9 x 168.3
584.2
177.8
58.3
325F01263
12 x 6
12.750 x 6.625
23.00
7.00
128.5
323.9 x 219.1
584.2
177.8
60.4
300 x 200
325F01280
12 x 8
12.750 x 8.625
23.00
7.00
133.1
= 1 for red paint finish, 2 for hot dipped galvanised finish
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 51 for fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page
15 or contact a GRINNELL Sales Representative.
Part
Number
Grooved
Fittings
C to LE
C to LE
C to SE
77
GROOVED FITTINGS
Figure 330 Tee Wyes
(Page 1 of 2)
Tech Data Sheet: G180
Grooved
Fittings
E1
E2
H
Pipe Size
Nominal
mm
Inches
50 x 50 x 50
2x2x2
65 x 65 x 65
2 1 2 x 2 1 2 x 2 1 2
80 x 80 x 80
3x3x3
100 x 100 x 80
4x4x3
100 x 100 x 100
4x4x4
125 x 125 x 80
5x5x3
125 x 125 x 100
5x5x4
125 x 125 x 125
5x5x5
150 x 150 x 80
6x6x3
150 x 150 x 100
6x6x4
150 x 150 x 125
6x6x5
150 x 150 x 150
6x6x6
200 x 200 x 80
8x8x3
200 x 200 x 100
8x8x4
200 x 200 x 125
8x8x5
200 x 200 x 150
8x8x6
78
O.D.
mm
Inches
60.3 x 60.3 x 60.3
2.375 x 2.375 x 2.375
73.0 x 73.0 x 73.0
2.875 x 2.875 x 2.875
88.9 x 88.9 x 88.9
3.500 x 3.500 x 3.500
114.3 x 114.3 x 88.9
4.500 x 4.500 x 3.500
114.3 x 114.3 x 114.3
4.500 x 4.500 x 4.500
141.3 x 141.3 x 88.9
5.563 x 5.563 x 3.500
141.3 x 141.3 x 114.3
5.563 x 5.563 x 4.500
141.3 x 141.3 x 141.3
5.563 x 5.563 x 5.563
168.3 x 168.3 x 88.9
6.625 x 6.625 x 3.500
168.3 x 168.3 x 114.3
6.625 x 6.625 x 4.500
168.3 x 168.3 x 141.3
6.625 x 6.625 x 5.563
168.3 x 168.3 x 168.3
6.625 x 6.625 x 6.625
219.1 x 219.1 x 88.9
8.625 x 8.625 x 3.500
219.1 x 219.1 x 114.3
8.625 x 8.625 x 4.500
219.1 x 219.1 x 141.3
8.625 x 8.625 x 5.563
219.1 x 219.1 x 168.3
8.625 x 8.625 x 6.625
G
mm
Inches
H
mm
Inches
E1
mm
Inches
E2
mm
Inches
Approx.
Weight
Kg.
Lbs.
69.9
2.75
76.2
3.00
82.6
3.25
95.3
3.75
95.3
3.75
101.6
4.00
101.6
4.00
101.6
4.00
114.3
4.50
114.3
4.50
114.3
4.50
114.3
4.50
152.4
6.00
152.4
6.00
152.4
6.00
152.4
6.00
177.8
7.00
196.9
7.75
215.9
8.50
266.7
10.50
266.7
10.50
317.5
12.50
317.5
12.50
317.5
12.50
355.6
14.00
355.6
14.00
355.6
14.00
355.6
14.00
457.2
18.00
457.2
18.00
457.2
18.00
457.2
18.00
228.6
9.00
266.7
10.50
292.1
11.50
327.2
12.88
346.2
13.63
362.0
14.25
384.3
15.13
409.7
16.13
388.9
15.31
412.8
16.25
438.2
17.25
463.6
18.25
462.0
18.19
482.6
19.00
508.0
20.00
536.7
21.13
187.2
7.37
224.5
8.84
236.5
9.31
258.3
10.17
301.5
11.87
336.6
13.25
346.1
13.63
355.6
14.00
376.2
14.81
387.4
15.25
396.9
15.63
406.4
16.00
487.2
19.18
495.3
19.50
504.7
19.87
517.4
20.37
2.6
5.7
4.6
10.2
6.5
14.4
9.3
20.5
11.2
24.6
12.9
28.4
14.9
32.8
17.6
38.8
17.2
37.9
19.3
42.5
22.0
48.5
25.5
56.3
30.5
67.3
32.8
72.3
35.7
78.8
39.6
87.4
www.grinnell.com
GROOVED FITTINGS
Figure 330 Tee Wyes
(Page 2 of 2)
Tech Data Sheet: G180
Grooved
Fittings
E1
E2
H
Pipe Size
Nominal
mm
Inches
200 x 200 x 200
8x8x8
250 x 250 x 80
10 x 10 x 3
250 x 250 x 100
10 x 10 x 4
250 x 250 x 125
10 x 10 x 5
250 x 250 x 150
10 x 10 x 6
250 x 250 x 200
10 x 10 x 8
250 x 250 x 250
10 x 10 x 10
300 x 300 x 80
12 x 12 x 3
300 x 300 x 100
12 x 12 x 4
300 x 300 x 150
12 x 12 x 6
300 x 300 x 200
12 x 12 x 8
300 x 300 x 250
12 x 12 x 10
300 x 300 x 300
12 x 12 x 12
O.D.
mm
Inches
219.1 x 219.1 x 219.1
8.625 x 8.625 x 8.625
273.0 x 273.0 x 88.9
10.750 x 10.750 x 3.500
273.0 x 273.0 x 114.3
10.750 x 10.750 x 4.500
273.0 x 273.0 x 141.3
10.750 x 10.750 x 5.563
273.0 x 273.0 x 168.3
10.750 x 10.750 x 6.625
273.0 x 273.0 x 219.1
10.750 x 10.750 x 8.625
273.0 x 273.0 x 273.0
10.750 x 10.750 x 10.750
323.9 x 323.9 x 88.9
12.750 x 12.750 x 3.500
323.9 x 323.9 x 114.3
12.750 x 12.750 x 4.500
323.9 x 323.9 x 168.3
12.750 x 12.750 x 6.625
323.9 x 323.9 x 219.1
12.750 x 12.750 x 8.625
323.9 x 323.9 x 273.0
12.750 x 12.750 x 10.750
323.9 x 323.9 x 323.9
12.750 x 12.750 x 12.750
G
mm
Inches
H
mm
Inches
E1
mm
Inches
E2
mm
Inches
Approx.
Weight
Kg.
Lbs.
152.4
6.00
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
177.8
7.00
177.8
7.00
177.8
7.00
177.8
7.00
177.8
7.00
177.8
7.00
457.2
18.00
520.7
20.50
520.7
20.50
520.7
20.50
520.7
20.50
520.7
20.50
520.7
20.50
584.2
23.00
584.2
23.00
584.2
23.00
584.2
23.00
584.2
23.00
584.2
23.00
590.6
23.25
505.0
19.88
527.1
20.75
555.8
21.88
581.2
22.88
692.2
27.25
692.2
27.25
527.1
20.75
546.1
21.50
603.3
23.75
660.4
26.00
711.2
28.00
787.4
31.00
539.8
21.25
543.1
21.38
552.5
21.75
565.2
22.25
574.7
22.63
654.1
25.75
619.1
24.38
577.9
22.75
584.2
23.00
609.6
24.00
635.0
25.00
654.1
25.75
698.5
27.50
49.4
109.0
46.1
101.7
48.5
106.9
51.6
113.8
55.4
122.1
68.5
151.1
79.4
175.1
61.0
134.5
63.2
139.4
70.0
154.5
79.7
175.8
93.2
205.4
108.9
240.1
79
GROOVED FITTINGS
Figure 331 Reducing Tee Wyes
Tech Data Sheet: G180
Grooved
Fittings
E1
E2
G
Pipe Size
Nominal
mm
Inches
100 x 80 x 80
4x3x3
100 x 80 x 100
4x3x4
125 x 80 x 80
5x3x3
125 x 80 x 125
5x3x5
125 x 100 x 80
5x4x3
125 x 100 x 100
5x4x4
150 x 100 x 150
6x4x6
150 x 125 x 80
6x5x3
150 x 125 x 100
6x5x4
200 x 150 x 100
8x6x4
200 x 150 x 200
8x6x8
O.D.
mm
Inches
114.3 x 88.9 x 88.9
4.500 x 3.500 x 3.500
114.3 x 88.9 x 114.3
4.500 x 3.500 x 4.500
141.3 x 88.9 x 88.9
5.563 x 3.500 x 3.500
141.3 x 88.9 x 141.3
5.563 x 3.500 x 5.563
141.3 x 114.3 x 88.9
5.563 x 4.500 x 3.500
141.3 x 114.3 x 114.3
5.563 x 4.500 x 4.500
168.3 x 114.3 x 168.3
6.625 x 4.500 x 6.625
168.3 x 141.3 x 88.9
6.625 x 5.563 x 3.500
168.3 x 141.3 x 114.3
6.625 x 5.563 x 4.500
219.1 x 168.3 x 114.3
8.625 x 6.625 x 4.500
219.1 x 168.3 x 219.1
8.625 x 6.625 x 8.625
G
mm
Inches
H
mm
Inches
E1
mm
Inches
E2
mm
Inches
Approx.
Weight
Kg.
Lbs.
228.9
9.01
362.0
14.25
279.5
11.00
419.1
16.50
279.7
11.01
279.7
11.01
469.9
18.50
304.9
12.00
304.9
12.00
330.2
13.00
609.6
24.00
187.5
7.38
266.7
10.50
247.7
9.75
317.5
12.50
231.9
9.13
231.9
9.13
355.6
14.00
273.1
10.75
273.1
10.75
304.8
12.00
457.2
18.00
273.1
10.75
346.2
13.63
292.1
11.50
409.7
16.13
301.88
11.88
323.9
12.75
463.6
18.25
330.2
13.00
352.6
13.88
374.7
14.75
590.6
23.25
184.2
7.25
301.5
11.87
195.8
7.71
354.3
13.95
221.2
8.71
228.6
9.00
349.3
13.75
235.0
9.25
244.3
9.62
260.3
10.25
539.8
21.25
6.2
13.7
11.1
24.5
8.6
19.0
17.5
38.5
8.8
19.5
10.5
23.1
25.5
56.2
11.6
25.6
13.3
29.3
18.2
40.2
49.3
108.6
80
www.grinnell.com
GROOVED FITTINGS
Figures 391, 392 & 393 Adapter Nipples
Tech Data Sheet: G180
Figure 391
Fabricated Adapter Nipple
Groove x Male BSP Thread
Grooved
Fittings
E to E
Figure 392
Fabricated Adapter Nipple
Groove x Groove
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
32
114
40
11 2
50
2
65
21 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
E to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
154.4
6.00
154.4
6.00
154.4
6.00
154.4
6.00
203.2
8.00
203.2
8.00
0.4
0.8
0.4
0.9
0.5
1.2
0.9
1.9
1.1
2.5
2.4
5.4
3.3
7.3
4.3
9.4
6.4
14.2
12.2
27.0
15.0
33.0
E to E
Figure 393
Fabricated Adapter Nipple
Groove x Plain
E to E
81
GROOVED FITTINGS
Figure 304 Groove x Male BSP Thread Nipple,
Machined
Grooved
Fittings
Part
Number
304H000342
304H000422
304H000482
304H000602
L
304H000762
304H000892
Nominal
Size
mm
Inches
25
1
32
1 1 4
40
1 1 2
50
2
65
76.1mm
80
3
A
mm
Inches
B
mm
Inches
L
mm
Inches
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
76.1
3.000
88.9
3.500
33.2
1.31
41.9
1.65
47.8
1.88
59.6
2.35
75.2
2.96
87.9
3.46
55
2.17
63
2.48
59
2.32
68
2.68
75
2.95
80
3.15
Approx.
Weight
Kg.
Lbs.
0.1
0.2
0.2
0.4
0.3
0.7
0.5
1.1
0.8
1.8
1.4
3.1
Part
Number
305H000342
305H000422
305H000482
305H000602
305H000762
305H000892
82
Nominal
Size
mm
Inches
25
1
32
1 1 4
40
1 1 2
50
2
65
76,1mm
80
3
A
mm
Inches
B
mm
Inches
L
mm
Inches
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
76.1
3.000
88.9
3.500
33.2
1.31
41.9
1.65
47.8
1.88
59.6
2.35
75.1
2.96
88.5
3.48
50
1.97
50
1.97
50
1.97
100
3.94
100
3.94
100
3.94
Approx.
Weight
Kg.
Lbs.
0.1
0.2
0.2
0.4
0.3
0.7
0.5
1.1
0.8
1.8
1.2
2.6
www.grinnell.com
OUTLET
FITTINGS
83
OUTLET FITTINGS
Outlet Fittings Table of Contents
Figure 730
Female Threaded Tees
Pages 85 - 87
Figure 730
Grooved Tees
Pages 88 - 90
Outlet
Fittings
MATERIAL SPECIFICATIONS
Housing Specifications
U-/xq->`>`iVvV>v
ductile iron castings, Grade 65-45-12
U/ii-i}]{{n > (65,000 psi)
Gasket Specifications
U>`i
* gaskets have a Green colour
code stripe identification and conform to ASTM D
2000 for service temperatures from -34C to 110C
(-30F to 230F). They are recommended for hot
water not to exceed 110C (230F), plus a variety of
dilute acids, oil free air, and many chemical services.
They are not recommended for petroleum services.
U>`i/ i gaskets have an Orange colour
code stripe identification and conform to ASTM
D 2000 for service temperatures from -29C to
82C ( -20F to 180F). They are recommended for
petroleum products, vegetable oils, mineral oils, and
air with oil vapors.
Coatings
U,i`q i>`>>`>`
Ui`]<V>>i`>
Bolt/Nut Specifications
UMetric: Carbon steel oval neck track head bolts
(Gold colour coded) are heat treated and conform
to the physical properties of ASTM F 568 M with a
minimum tensile strength of 760 MPa.
Carbon steel heavy hex nuts conform to the physical
properties of ASTM A 563 M Class 9. Bolts and nuts
are zinc-electroplated conforming to
ASTM B 633.
UANSI: Carbon steel oval neck bolts and nuts are
heat-treated and conform to the physical properties
of ASTM A 183 Grade 2 and SAE J429 Grade
5 with a minimum tensile strength of 7584 Bar
(110,000 psi).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995
Grade 5. Bolts and nuts are zinc-electroplated
conforming to ASTM B 633.
U->iiiL>`>i>>>Li
request.
84
www.grinnell.com
OUTLET FITTINGS
Figure 730 Mechanical Tees Threaded
(Page 1 of 3)
Tech Data Sheet: G210
B
A
Hole
Dia.
Outlet
Fittings
Takeout
Part
Number
730AT2005
730AT2007
730AT2010
730AT2012
730AT2015
730AT2505
730AT2507
730AT2510
730AT2512
730AT2515
730MT2520
730AT2605
730AT2607
730AT2610
730MT2612
730MT2615
730MT2620
Hole Dia.
Min.
mm
In.
Max.
mm
In.
Max.
Branch
End Load
kN
Lbs.
50 x 15
2 x 1 2
50 x 20
2 x 3 4
50 x 25
2x1
50 x 32
2 x 1- 14
50 x 40
2 x 1- 1 2
65 x 15
2- 1 2 x 1 2
65 x 20
2- 1 2 x 3 4
65 x 25
2- 1 2 x 1
65 x 32
2- 1 2 x 1- 14
65 x 40
2- 1 2 x 1- 1 2
65 x 50
2- 1 2 x 2
65 x 15
76.1mm x 1 2
65 x 20
76.1mm x 3 4
65 x 25
76.1mm x 1
65 x 32
76.1mm x 1- 14
65 x 40
76.1mm x 1- 1 2
65 x 50
76.1mm x 2
38.1
1.50
38.1
1.50
38.1
1.50
44.5
1.75
44.5
1.75
38.1
1.50
38.1
1.50
38.1
1.50
50.8
2.00
50.8
2.00
50.8
2.00
38.1
1.50
38.1
1.50
38.1
1.50
50.8
2.00
50.8
2.00
50.8
2.00
41.3
1.63
41.3
1.63
41.3
1.63
47.6
1.88
47.6
1.88
41.3
1.63
41.3
1.63
41.3
1.63
54.0
2.13
54.0
2.13
54.0
2.13
41.3
1.63
41.3
1.63
41.3
1.63
54.0
2.13
54.0
2.13
54.0
2.13
1.2
277.1
1.9
433.0
3.0
679.1
4.8
1082.1
6.3
1417.6
1.2
277.1
1.9
433.0
3.0
679.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
1.2
277.1
1.9
433.0
3.0
679.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
Dimensions - mm In.
A
66.5
2.62
66.5
2.62
66.5
2.62
70.6
2.78
69.9
2.75
73.2
2.88
73.2
2.88
73.2
2.88
76.2
3.00
78.0
3.07
81.0
3.19
74.5
2.94
74.5
2.94
74.5
2.94
77.7
3.06
79.5
3.13
82.6
3.25
124.0
4.88
124.0
4.88
124.0
4.88
124.0
4.88
124.0
4.88
133.4
5.25
133.4
5.25
133.4
5.25
133.4
5.25
133.4
5.25
133.4
5.25
142.7
5.62
142.7
5.62
142.7
5.62
142.7
5.62
142.7
5.62
142.7
5.62
78.0
3.07
78.0
3.07
78.0
3.07
84.3
3.32
84.3
3.32
78.0
3.07
78.0
3.07
78.0
3.07
90.4
3.56
91.2
3.59
101.6
4.00
78.0
3.07
78.0
3.07
78.0
3.07
90.4
3.56
90.4
3.56
101.6
4.00
53.8
2.12
53.8
2.12
53.8
2.12
49.0
1.93
49.0
1.93
60.5
2.38
60.5
2.38
60.5
2.38
55.6
2.19
55.1
2.17
62.0
2.44
62.0
2.44
62.0
2.44
62.0
2.44
57.2
2.25
57.2
2.25
63.5
2.50
40.4
1.59
40.4
1.59
40.4
1.59
40.4
1.59
40.4
1.59
46.0
1.81
46.0
1.81
46.0
1.81
46.0
1.81
46.0
1.81
46.0
1.81
47.5
1.87
47.5
1.87
47.5
1.87
47.5
1.87
47.5
1.87
47.5
1.87
Bolt
Size
mm
In.
Approx.
Weight
kg
Lbs.
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
M10 x 57
M10 x 57
M10 x 57
M10 x 57
M10 x 57
1.1
2.5
1.0
2.3
1.0
2.2
1.1
2.4
1.1
2.5
1.1
2.4
1.1
2.4
1.1
2.4
1.1
2.5
1.2
2.6
1.2
2.7
1.1
2.5
1.1
2.5
1.1
2.5
1.5
3.3
1.6
3.6
1.7
3.7
85
OUTLET FITTINGS
Figure 730 Mechanical Tees Threaded
(Page 2 of 3)
Tech Data Sheet: G210
B
A
Hole
Dia.
D
Takeout
Part
Number
730MT3005
730MT3007
730MT3010
730MT3012
730MT3015
730MT3020
730MT4205
730MT4207
730MT4210
730AT4212
730AT4215
730MT4220
730MT4226
730MT4230
730MT5315
730MT5320
730MT5326
730MT5330
730MT6212
86
Hole Dia.
Min.
mm
In.
Max.
mm
In.
Max.
Branch
End Load
kN
Lbs.
80 x 15
3 x 1 2
80 x 20
3 x 3 4
80 x 25
3x1
80 x 32
3 x 1- 14
80 x 40
3 x 1- 1 2
80 x 50
3x2
100 x 15
4 x 1 2
100 x 20
4 x 3 4
100 x 25
4x1
100 x 32
4 x 1- 14
100 x 40
4 x 1- 1 2
100 x 50
4x2
100 x 65
4 x 76.1mm
100 x 80
4x3
125 x 40
139.7mm/5 x 1- 1 2
125 x 50
139.7mm/5 x 2
125 x 65
139.7mm/5 x 76.1mm
125 x 80
139.7mm/5 x 3
150 x 32
165.1mm x 1- 14
38.1
1.50
38.1
1.50
38.1
1.50
44.5
1.75
50.8
2.00
63.5
2.50
38.1
1.50
38.1
1.50
38.1
1.50
44.5
1.75
50.8
2.00
63.5
2.50
69.9
2.75
88.9
3.50
50.8
2.00
63.5
2.50
69.9
2.75
88.9
3.50
50.8
2.00
41.3
1.63
41.3
1.63
41.3
1.63
47.6
1.88
54.0
2.13
66.7
2.63
41.3
1.63
41.3
1.63
41.3
1.63
47.6
1.88
54.0
2.13
66.7
2.63
73.0
2.88
92.1
3.63
54.0
2.13
66.7
2.63
73.0
2.88
92.1
3.63
54.0
2.13
1.2
277.1
1.9
433.0
3.0
679.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
1.2
277.1
1.9
433.0
3.0
679.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
15.7
3534.3
21.4
4810.6
6.3
1417.6
9.9
2215.1
15.7
3534.3
21.4
4810.6
4.8
1082.1
Dimensions - mm In.
A
81.0
3.19
81.0
3.19
81.0
3.19
84.8
3.34
85.9
3.38
88.9
3.50
93.7
3.69
93.7
3.69
93.7
3.69
99.6
3.92
101.6
4.00
101.6
4.00
101.6
4.00
104.9
4.13
117.6
4.63
117.6
4.63
120.7
4.75
127.0
5.00
130.3
5.13
155.7
6.13
155.7
6.13
155.7
6.13
155.7
6.13
155.7
6.13
155.7
6.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
206.5
8.13
206.5
8.13
206.5
8.13
206.5
8.13
235.0
9.25
78.0
3.07
78.0
3.07
78.0
3.07
84.3
3.32
90.4
3.56
103.9
4.09
78.0
3.07
78.0
3.07
78.0
3.07
84.3
3.32
90.4
3.56
103.1
4.06
111.3
4.38
130.3
5.13
90.4
3.56
103.1
4.06
111.3
4.38
130.3
5.13
90.4
3.56
65.0
2.56
65.0
2.56
65.0
2.56
63.5
2.50
63.0
2.48
69.9
2.75
77.7
3.06
77.7
3.06
77.7
3.06
76.2
3.00
75.7
2.98
82.6
3.25
79.2
3.12
84.1
3.31
101.6
4.00
98.6
3.88
98.6
3.88
103.1
4.06
108.0
4.25
56.1
2.21
56.1
2.21
56.1
2.21
56.1
2.21
56.1
2.21
56.1
2.21
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
85.6
3.37
85.6
3.37
85.6
3.37
85.6
3.37
99.1
3.90
Bolt
Size
mm
In.
Approx.
Weight
kg
Lbs.
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
M12 x 89
1
2 x 3
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
M16 x 121
5
8 x 4- 3 4
M16 x 121
1.7
3.7
1.7
3.7
1.7
3.7
1.6
3.5
1.7
3.7
2.1
4.7
2.2
4.8
2.2
4.8
2.2
4.8
2.2
4.8
2.3
5.1
2.5
5.5
2.8
6.2
3.5
7.8
3.5
7.8
3.5
7.8
4.0
8.9
5.8
12.7
3.5
7.7
www.grinnell.com
OUTLET FITTINGS
Figure 730 Mechanical Tees Threaded
(Page 3 of 3)
Tech Data Sheet: G210
B
A
Hole
Dia.
D
Takeout
Part
Number
730AT6215
730AT6220
730AT6226
730AT6230
730MT6312
730AT6315
730AT6320
730AT6326
730AT6330
730AT8020
730AT8026
730AT8030
Hole Dia.
Min.
mm
In.
Max.
mm
In.
Max.
Branch
End Load
kN
Lbs.
150 x 40
165.1mm x 1- 1 2
150 x 50
165.1mm x 2
150 x 65
165.1mm x 76.1mm
150 x 80
165.1mm x 3
150 x 32
6 x 1- 14
150 x 40
6 x 1- 1 2
150 x 50
6x2
150 x 65
6 x 76.1mm
150 x 80
6x3
200 x 50
8x2
200 x 65
8 x 76.1mm
200 x 80
8x3
50.8
2.00
63.5
2.50
69.9
2.75
88.9
3.50
50.8
2.00
50.8
2.00
63.5
2.50
69.9
2.75
88.9
3.50
69.9
2.75
69.9
2.75
88.9
3.50
54.0
2.13
66.7
2.63
73.0
2.88
92.1
3.63
54.0
2.13
54.0
2.13
66.7
2.63
73.0
2.88
92.1
3.63
73.0
2.88
73.0
2.88
92.1
3.63
6.3
1417.6
9.9
2215.1
15.7
3584.3
21.4
4810.6
4.8
1082.1
6.3
1417.6
9.9
2215.1
14.4
3245.9
21.4
4810.6
14.4
3245.9
15.7
3534.3
21.4
4810.6
Dimensions - mm In.
A
130.3
5.13
130.3
5.13
130.3
5.13
139.7
5.50
130.3
5.13
130.3
5.13
130.3
5.13
130.3
5.13
139.7
5.50
158.8
6.25
158.8
6.25
165.1
6.50
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
317.5
12.50
317.5
12.50
317.5
12.50
90.4
3.56
103.1
4.06
111.3
4.38
130.3
5.13
90.4
3.56
90.4
3.56
103.1
4.06
111.3
4.38
130.3
5.13
103.1
4.06
111.3
4.38
130.3
5.13
102.6
4.04
109.5
4.31
106.2
4.18
111.0
4.37
108.0
4.25
102.6
4.04
109.5
4.31
106.2
4.18
111.0
4.37
130.0
5.12
130.0
5.12
136.4
5.37
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
124.5
4.90
124.5
4.90
124.5
4.90
Bolt
Size
mm
In.
Approx.
Weight
kg
Lbs.
M16 x 121
M16 x 121
M16 x 121
M16 x 121
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M20 x 121
3
4 x 4- 3 4
M20 x 121
M20 x 121
3
4 x 4- 3 4
3.5
7.7
3.7
8.2
4.1
9.0
4.8
10.5
3.4
7.5
3.4
7.5
3.5
7.7
4.0
8.9
4.7
10.3
5.5
12.1
5.7
12.6
6.1
13.6
87
OUTLET FITTINGS
Figure 730 Mechanical Tees Grooved
(Page 1 of 3)
Tech Data Sheet: G210
B
A
Hole
Dia.
Outlet
Fittings
Part
Number
730AG2012
730AG2015
730AG2512
730MG2520
730MG2612
730MG2615
730MG2620
730MG3012
730MG3015
730MG3020
730AG4212
730AG4215
730MG4220
730MG4225
730MG4226
730MG4230
730MG5315
88
Hole Dia.
Nominal Size
Run x Branch
DN
In.
Min.
mm
In.
Max.
mm
In.
50 x 32
2 x 1- 14
50 x 40
2 x 1- 1 2
65 x 32
2- 1 2 x 1- 14
65 x 50
2- 1 2 x 2
65 x 32
76.1mm x 1- 14
65 x 40
76.1mm x 1- 1 2
65 x 50
76.1mm x 2
80 x 32
3 x 1- 14
80 x 40
3 x 1- 1 2
80 x 50
3x2
100 x 32
4 x 1- 14
100 x 40
4 x 1- 1 2
100 x 50
4x2
100 x 65
4 x 2- 1 2
100 x 65
4 x 76.1mm
100 x 80
4x3
125 x 40
139.7mm/5 x 1- 1 2
44.5
1.75
44.5
1.75
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
44.5
1.75
50.8
2.00
63.5
2.50
44.5
1.75
50.8
2.00
63.5
2.50
69.9
2.75
69.9
2.75
88.9
3.50
50.8
2.00
47.6
1.88
47.6
1.88
54.0
2.13
54.0
2.13
54.0
2.13
54.0
2.13
54.0
2.13
47.6
1.88
54.0
2.13
66.7
2.63
47.6
1.88
54.0
2.13
66.7
2.63
73.0
2.88
73.0
2.88
92.1
3.63
54.0
2.13
Max.
End Load
Branch
kN
Lbs.
4.8
1082.1
6.3
1417.6
4.8
1082.1
9.9
2215.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
4.8
1082.1
6.3
1417.6
9.9
2215.1
14.4
3245.9
15.7
3534.3
21.4
4810.6
6.3
1417.6
Dimensions - mm In.
A
70.6
2.78
66.5
2.62
76.2
3.00
81.0
3.19
77.7
3.06
79.5
3.13
82.6
3.25
84.8
3.34
85.9
3.38
88.9
3.50
99.6
3.92
101.6
4.00
101.6
4.00
101.6
4.00
101.6
4.00
104.9
4.13
117.6
4.63
124.0
4.88
124.0
4.88
133.4
5.25
133.4
5.25
142.7
5.62
142.7
5.62
142.7
5.62
155.7
6.13
155.7
6.13
155.7
6.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
181.1
7.13
206.5
8.13
84.3
3.32
84.3
3.32
90.4
3.56
101.6
4.00
90.4
3.56
90.4
3.56
101.6
4.00
84.3
3.32
90.4
3.56
103.9
4.09
84.3
3.32
90.4
3.56
103.1
4.06
111.3
4.38
111.3
4.38
130.3
5.13
90.4
3.56
40.4
1.59
40.4
1.59
46.0
1.81
46.0
1.81
47.5
1.87
47.5
1.87
47.5
1.87
56.1
2.21
56.1
2.21
56.1
2.21
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
70.6
2.78
85.6
3.37
Bolt
Size
mm
In.
Approx.
Weight
kg
Lbs.
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
3
8 x 2- 14
M10 x 57
M10 x 57
M10 x 57
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M12 x 89
M12 x 89
1
2 x 3
M16 x 121
5
8 x 4- 3 4
1.1
2.5
1.1
2.4
1.1
2.5
1.1
2.5
1.1
2.5
1.1
2.5
1.1
2.5
1.6
3.5
1.6
3.6
2.0
4.5
2.2
4.8
2.3
5.0
2.4
5.3
2.7
5.9
2.7
5.9
3.4
7.4
3.5
7.7
www.grinnell.com
OUTLET FITTINGS
Figure 730 Mechanical Tees Grooved
(Page 2 of 3)
Tech Data Sheet: G210
B
A
Hole
Dia.
Outlet
Fittings
Part
Number
Nominal Size
Run x Branch
DN
In.
125 x 50
139.7mm/5 x 2
125 x 65
730MG5325
139.7mm/5 x 2- 1 2
125 x 65
730MG5326
139.7mm/5 x 76.1mm
125 x 80
730MG5330
139.7mm/5 x 3
150 x 32
730MG6212
165.1mm x 1- 14
150 x 40
730MG6215
165.1mm x 1- 1 2
150 x 50
730AG6220
165.1mm x 2
150 x 65
730AG6225
165.1mm x 2- 1 2
150 x 65
730AG6226
165.1mm x 76.1mm
150 x 100
730AG6242
165.1mm x 4
150 x 32
730MG6312
6 x 1- 14
150 x 40
730AG6315
6 x 1- 1 2
150 x 50
730AG6320
6x2
150 x 65
730AG6325
6 x 2- 1 2
150 x 65
730AG6326
6 x 76.1mm
150 x 80
730AG6330
6x3
150 x 100
730AG6342
6x4
730MG5320
Hole Dia.
Min.
mm
In.
Max.
mm
In.
63.5
2.50
69.9
2.75
69.9
2.75
88.9
3.50
50.8
2.00
50.8
2.00
63.5
2.50
69.9
2.75
69.9
2.75
114.3
4.50
50.8
2.00
50.8
2.00
63.5
2.50
69.9
2.75
69.9
2.75
88.9
3.50
114.3
4.50
66.7
2.63
73.0
2.88
73.0
2.88
92.1
3.63
54.0
2.13
54.0
2.13
66.7
2.63
73.0
2.88
73.0
2.88
117.5
4.63
54.0
2.13
54.0
2.13
66.7
2.63
73.0
2.88
73.0
2.88
92.1
3.63
117.5
4.63
Max.
End Load
Branch
kN
Lbs.
9.9
2215.1
14.4
3245.9
15.7
3534.3
21.4
4810.6
4.8
1082.1
6.3
1417.6
9.9
2215.1
14.4
3245.9
15.7
3534.3
35.4
7952.2
4.8
1082.1
6.3
1417.6
9.9
2215.1
14.4
3245.9
14.4
3245.9
21.4
4810.6
35.4
7952.2
Dimensions - mm In.
A
117.6
4.63
120.7
4.75
120.7
4.75
127.0
5.00
130.3
5.13
130.3
5.13
130.3
5.13
130.3
5.13
130.3
5.13
136.7
5.38
130.3
5.13
130.3
5.13
130.3
5.13
130.3
5.13
130.3
5.13
139.7
5.50
136.7
5.38
206.5
8.13
206.5
8.13
206.5
8.13
206.5
8.13
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
235.0
9.25
103.1
4.06
111.3
4.38
111.3
4.38
130.3
5.13
90.4
3.56
90.4
3.56
103.1
4.06
111.3
4.38
111.3
4.38
155.7
6.13
90.4
3.56
90.4
3.56
103.1
4.06
111.3
4.38
111.3
4.38
130.3
5.13
155.7
6.13
85.6
3.37
85.6
3.37
85.6
3.37
85.6
3.37
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
99.1
3.90
Bolt
Size
mm
In.
Approx.
Weight
kg
Lbs.
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
M16 x 121
5
8 x 4- 3 4
M16 x 121
M16 x 121
M16 x 121
M16 x 121
M16 x 121
M16 x 121
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
M16 x 121
5
8 x 4- 3 4
3.4
7.6
3.9
8.6
3.9
8.6
5.6
12.3
3.5
7.7
3.4
7.6
3.6
8.0
4.0
8.8
4.0
8.8
5.3
11.6
3.5
7.7
3.4
7.6
3.6
8.0
4.0
8.8
4.0
8.8
4.6
10.1
5.3
11.6
89
OUTLET FITTINGS
Figure 730 Mechanical Tees Grooved
(Page 3 of 3)
Tech Data Sheet: G210
B
A
Hole
Dia.
Outlet
Fittings
Part
Number
730AG8020
730AG8025
730AG8026
730AG8030
730AG8042
Hole Dia.
Nominal Size
Run x Branch
DN
In.
Min.
mm
In.
Max.
mm
In.
200 x 50
8x2
200 x 65
8 x 2- 1 2
200 x 65
8 x 76.1mm
200 x 80
8x3
200 x 100
8x4
69.9
2.75
69.9
2.75
69.9
2.75
88.9
3.50
114.3
4.50
73.0
2.88
73.0
2.88
73.0
2.88
92.1
3.63
117.5
4.63
Max.
End Load
Branch
kN
Lbs.
9.9
2215.1
14.4
3245.9
15.7
3534.3
21.4
4810.6
35.4
7952.2
Dimensions - mm In.
A
158.8
6.25
158.8
6.25
158.8
6.25
165.1
6.50
162.1
6.38
317.5
12.50
317.5
12.50
317.5
12.50
317.5
12.50
317.5
12.50
111.3
4.38
111.3
4.38
111.3
4.38
130.3
5.13
155.7
6.13
124.5
4.90
124.5
4.90
124.5
4.90
124.5
4.90
124.5
4.90
Bolt
Size
mm
In.
Approx.
Weight
kg
Lbs.
M20 x 121
3
4 x 4- 3 4
M20 x 121
3
4 x 4- 3 4
M20 x 121
M20 x 121
3
4 x 4- 3 4
M20 x 121
3
4 x 4- 3 4
5.5
12.1
5.6
12.3
5.6
12.3
6.0
13.2
6.7
14.7
90
www.grinnell.com
VALVES &
ACCESSORIES
91
Figure 39101N
Butterfly Valves,
Lever Operated with
Nitrile Disc
Page 96
Figure 39107
Butterfly Valves
Gear Operated for
Potable Water
Applications
Page 97
Figure SJ-200
Low Profile
Butterfly Valves
Page 98
Model B8101
Low Profile
Butterfly Valves
Page 99
Model SJ-530
Ball Valve (3 Port)
Pages 106
Figure 760
WYE Strainer
Page 120
Model CV-1
Grooved End
Check Valves
Pages 107 - 108
Figure S855
Tee Strainer
Page 121
Model SJ-915
Dual Disk Check Valves
65 - 300mm (212-12")
Page 109
Model SJ-915
Dual Disk Check Valves
350 - 600mm (14" - 24")
Page 110
Model CB800
Balancing Valves
Overview
Page 111
Model CB800
Threaded
Balancing Valves
Page 112
Model CB800
Grooved
Balancing Valves
Page 113
Model CB800
Flanged
Balancing Valves
ANSI & PN16/PN10
Page 114 - 115
Model CB800
Solder
Balancing Valves
Page 116
Figure B333
Large Diameter
Butterfly Valve
Page 100 - 101
Model CB800
Circuit Balancing
Insulation Kits
Page 117
Model BV835
Ball Valves
Pages 102 - 103
Model CB800
Circuit Balancing Valves
MC2 Measuring
Computer
Page 117
Model SJ-500L
Ball Valve
Pages 104
Model SJ-500W
Ball Valve
Gear Operated
Pages 105
Figure 70607
Groove Ended
Metering Station
Page 118
Figure Venturi
Flow Meter Butt Weld
with Grooved Ends
Page 119
Figure S810
Suction Diffusers
Pages 122 - 123
Figure 7550
Expansion Joints
Pages 124 - 129
Figure RXAG
Expansion Joint
Page 130
Figure ALG
Expansion Joint
Page 131
Figure ANS
Expansion Joint
Page 132
Figure FTU
Rubber Bellows
ISO R7 Threaded
Page 132
Figure FSF
Flanged Rubber Bellows
Page 133
Figure UFBX
Flexible Hoses
Pages 134 - 135
Figure HERCULES
Fix Point
Page 136
Figure FAZ
Anchor
Page 137
Figures 407GT &
407T
Dielectric Waterways
Page 138
92
www.grinnell.com
DN
Size
50
60.3
2.375
65
73.0
2- 1 2
2.875
65
76.1
76.1mm
3.000
80
88.9
3.500
100
114.3
4.500
125
139.7
139.7mm
5.500
125
141.3
5.563
150
165.1
165.1mm
6.500
150
168.3
6.625
200
219.1
8.625
250
273.0
10
10.750
300
323.9
12
12.750
UOM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
L/min
UK-GPM
US-GPM
Valves &
Accessories
70C
(158F)
1643
361
434
2300
506
608
2300
506
608
3500
770
925
6283
1,382
1,660
9433
2,075
2,492
9433
2,075
2,492
16067
3,534
4,245
16067
3,534
4,245
33367
7,340
8,816
56067
12,333
14,813
93217
20,505
24,628
80C
(176F)
1767
389
467
2600
572
687
2600
572
687
4050
891
1,070
8133
1,789
2,149
12750
2,805
3,369
12750
2,805
3,369
19933
4,385
5,266
19933
4,385
5,266
47500
10,449
12,550
77350
17,015
20,436
118000
25,957
31,176
90C
(194F)
1850
407
489
2717
598
718
2717
598
718
4150
913
1,096
8567
1,885
2,263
13717
3,017
3,624
13717
3,017
3,624
21433
4,715
5,663
21433
4,715
5,663
52150
11,472
13,778
81433
17,913
21,515
124283
27,339
32,836
The relation between Cv and Kv is different for UK and US: (UK) Cv = 0.97Kv and (US) Cv = 1.17Kv,
The imperial (UK) gallon is officially defined as 4.546 liters.
The imperial (US) gallon is officially defined as 3.785 liters.
93
MATERIAL
SPECIFICATIONS
Body
U*>i`LiiVVi
Disc
UVi
*V>}
Retainer Plug
F
U*>i`ii-/n
O-Ring
U
*
Locking Ring
U-}ii
A
Performance
U*ii`]ii>}i
C
Pipe Size
Part
Number
39101HV060
39101HV073
39101HV076
39101HV089
39101HV114
39101HV139
39101HV141
39101HV165
39101HV168
39101HV219
Nominal
mm
Inches
O.D.
mm
Inches
Max. Wk
Pressure
Bar
psi
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
Dimensions - mm Inches
Lever
Type
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
100
3.94
105
4.13
105
4.13
112
4.41
135
5.31
147
5.79
147
5.79
180
7.09
180
7.09
204
77.5
3.05
82
3.23
82
3.23
90
3.54
107
4.21
121
4.76
121
4.76
150
5.91
150
5.91
172
81
3.19
97
3.82
97
3.82
97
3.82
116
4.57
148
5.83
148
5.83
148
5.83
148
5.83
133
230
9.06
230
9.06
230
9.06
230
9.06
320
12.60
320
12.60
320
12.60
420
16.54
420
16.54
420
69
2.72
69
2.72
69
2.72
69
2.72
77
3.03
77
3.03
77
3.03
77
3.03
77
3.03
77
45
1.77
45
1.77
45
1.77
45
1.77
50
1.97
50
1.97
50
1.97
50
1.97
50
1.97
50
230
8.03
6.77
5.24
16.54
3.03
1.97
LC 4
LC 4
LC 4
LC 4
LC 12
LC 12
LC 12
LC 20
LC 20
LC 20
Approx
Weight
Kg.
Lbs.
1.9
4.2
2.9
6.4
2.9
6.4
3.4
7.5
5.3
11.7
8.5
18.7
8.5
18.7
12.1
26.7
12.1
26.7
14.7
32.4
94
www.grinnell.com
MATERIAL
SPECIFICATIONS
Body
UVi-/x
Disc
UVi
*V>}
Bushing
U->i-ii-{
Valves &
Accessories
Retainer Plug
E
U*>i`ii-/n
O-Ring
U
*
Locking Ring
U-}ii
Performance
U*ii`]ii>}i
Pipe Size
Part
Number
39101-060
39101-073
39101-076
39101-089
39101-114
39101-139
39101-141
39101-165
39101-168
39101-219
Nominal
mm
Inches
O.D.
mm
Inches
Max. Wk
Pressure
Bar
psi
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
8
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
Dimensions - mm Inches
A
100
3.94
105
4.13
105
4.13
112
4.41
135
5.31
147
5.79
147
5.79
180
7.09
180
7.09
204
8.03
77.5
3.05
82
3.23
82
3.23
90
3.54
107
4.21
121
4.76
121
4.76
150
5.91
150
5.91
172
6.77
81
3.19
97
3.82
97
3.82
97
3.82
116
4.57
148
5.83
148
5.83
148
5.83
148
5.83
133
5.24
230
9.06
230
9.06
230
9.06
230
9.06
320
12.60
320
12.60
320
12.60
420
16.54
420
16.54
420
16.54
70
2.76
70
2.76
70
2.76
70
2.76
76
2.99
76
2.99
76
2.99
76
2.99
76
2.99
76
2.99
45
1.77
45
1.77
45
1.77
45
1.77
50
1.97
50
1.97
50
1.97
50
1.97
50
1.97
50
1.97
Lever
Type
LC 4
LC 4
LC 4
LC 4
LC 12
LC 12
LC 12
LC 20
LC 20
LC 20
Approx
Weight
Kg.
Lbs.
1.9
4.2
2.9
6.4
2.9
6.4
3.4
7.5
5.3
11.7
8.5
18.7
8.5
18.7
12.1
26.7
12.1
26.7
14.7
32.4
95
Disc
UVi i ,
Bushing
U*/
Liii`ii
Retainer Plug
Valves &
Accessories
U*>i`ii-/n
O-Ring
U i ,
E
Locking Ring
U-}ii
Performance
U*ii`]ii>}i
C
Pipe Size
Part
Number
39101N-060
39101N-073
39101N-076
39101N-089
39101N-114
39101N-139
39101N-141
39101N-165
39101N-168
39101N-219
Nominal
mm
Inches
O.D.
mm
Inches
Max. Wk
Pressure
Bar
psi
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
8
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
16
230
Dimensions - mm Inches
Lever
Type
100
3.94
105
4.13
105
4.13
112
4.41
135
5.31
147
5.79
147
5.79
180
7.09
180
7.09
204
8.03
77.5
3.05
82
3.23
82
3.23
90
3.54
107
4.21
121
4.76
121
4.76
150
5.91
150
5.91
172
6.77
81
3.19
97
3.82
97
3.82
97
3.82
116
4.57
148
5.83
148
5.83
148
5.83
148
5.83
133
5.24
230
9.06
230
9.06
230
9.06
230
9.06
320
12.60
320
12.60
320
12.60
420
16.54
420
16.54
420
16.54
70
2.76
70
2.76
70
2.76
70
2.76
76
2.99
76
2.99
76
2.99
76
2.99
76
2.99
76
2.99
45
1.77
45
1.77
45
1.77
45
1.77
50
1.97
50
1.97
50
1.97
50
1.97
50
1.97
50
1.97
LC 4
LC 4
LC 4
LC 4
LC 12
LC 12
LC 12
LC 20
LC 20
LC 20
Approx
Weight
Kg.
Lbs.
1.9
4.2
2.9
6.4
2.9
6.4
3.4
7.5
5.3
11.7
8.5
18.7
8.5
18.7
12.1
26.7
12.1
26.7
14.7
32.4
96
www.grinnell.com
Disc
UVi
*V>}
Bushing
U*/
Liii`ii
Retainer Plug
Valves &
Accessories
U*>i`ii-/n
O-Ring
U i ,
Locking Ring
U-}ii
Performance
U*ii`]ii>}i
K
D
Pipe Size
Part
Number
39107-089
39107-114
39107-139
39107-141
39107-165
39107-168
39107-219
39107-273
39107-324
Nominal
mm
Inches
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
200
8
250
10
300
12
Max.
Work
O.D. Pressure
mm
Bar
Inches
psi
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
12.7
175
12.7
175
Dimensions - mm Inches
A
112
90
4.41 3.54
135
107
5.31 4.21
147
121
5.79 4.76
147
121
5.79 4.76
180
150
7.09 5.91
180
150
7.09 5.91
204
172
8.03 6.77
250
233
9.84 9.17
275
258
10.83 10.16
97
3.82
116
4.57
148
5.83
148
5.83
148
5.83
148
5.83
133
5.24
159
6.26
165
6.50
137
5.39
170
6.69
182
7.17
182
7.17
215
8.46
215
8.46
239
9.41
288
11.34
313
12.32
72
2.83
101
3.98
101
3.98
101
3.98
101
3.98
101
3.98
101
3.98
118
4.65
118
4.65
53
2.09
79
3.11
79
3.11
79
3.11
79
3.11
79
3.11
79
3.11
82
3.23
82
3.23
185
7.28
228
8.98
228
8.98
228
8.98
228
8.98
228
8.98
228
8.98
228
8.98
228
8.98
55
2.17
77
3.03
77
3.03
77
3.03
77
3.03
77
3.03
77
3.03
79
3.11
79
3.11
45
172
150
1.77 6.77 5.91
67
216
300
2.64 8.50 11.81
67
228
300
2.64 8.98 11.81
67
228
300
2.64 8.98 11.81
67
261
300
2.64 10.28 11.81
67
261
300
2.64 10.28 11.81
67
285
300
2.64 11.22 11.81
80
332
300
3.15 13.07 11.81
80
357
300
3.15 14.06 11.81
Approx
Weight
Kg.
Lbs.
7.4
16.3
15.0
33.1
18.3
40.3
18.5
40.8
21.4
47.2
21.7
47.8
24.0
52.9
40.0
88.2
49.0
108.0
97
MATERIAL SPECIFICATIONS
Valve Body:
UVi-/x]x{x>`
ASTM A 395, Gr. 65-15-45, min tensile strength 4481
Bar (65,000 psi).
Disc:
Valves &
Accessories
U->i-ii
n
O.D.
B
A
Pressure-Temperature Rating
Nom.
Working Pressure Shell Test
Rating
CWP
16 Bar @38C
232 psi @100F
24 Bar
350 psi
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
U->iii/i{
O-Ring:
U ,
Nut:
U
>LiiV]ViiV>i`
Lever Handle:
U
>Lii]ViiV>i`>V}
Performance
U*ii`]V>V>,
Representative.
->i
Dimensions - mm Inches
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
81.0
3.19
97.0
3.82
97.0
3.82
116.0
4.57
148.0
5.83
133.0
5.25
48
1.89
54
2.13
62
2.44
76
3.00
104
4.04
140
5.50
57
2.25
67
2.65
75
2.94
106
4.17
139
5.47
152
6.00
140
5.51
190
7.48
190
7.48
274
10.79
274
10.79
274
10.79
Approx.
Weight
Kg.
Lbs.
0.9
2.0
1.5
3.3
1.9
4.2
3.9
8.6
10.1
22.2
11.3
27.9
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
98
www.grinnell.com
MATERIAL SPECIFICATIONS
Body
UViVv}-/x
Body Coating
U >ViV>i`
Valves &
Accessories
Disc
UViVv}-/x
Disc Seal
U>`i
* encapsulated rubber
-29C to 121C (-20F to 250F ) with intermittent
service at 121C (250F ) and continuous service at
107C (225F )
Stem
B
U/iVi>iii]iVv}-{
Stem Seal
U
*"}]i>`ii
Handle
F
E
U
>LiiV>i`
Performance
U*ii`]V>V>,
Representative.
->i
Pipe Size
Dimensions - mm Inches
Approx.
Weight
Kg.
Lbs.
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
86.0
3.39
96.0
3.78
96.0
3.78
115.0
4.53
152.0
5.98
152.0
5.98
210.0
8.27
210.0
8.27
25.0
0.98
25.0
0.98
25.0
0.98
25.0
0.98
46.0
1.81
52.0
2.05
65.0
2.56
83.0
3.27
50.0
1.97
61.0
2.40
67.0
2.64
83.0
3.27
80.0
3.15
91.0
3.58
107.0
4.21
123.0
4.84
1.9
4.2
2.9
6.4
3.4
7.5
5.3
11.7
125
5
141.3
5.563
139.7
5.50
311.2
12.25
32.0
1.26
101.6
4.00
101.6
4.00
171.5
6.75
5.8
12.7
150
6
168.3
6.625
132.0
5.20
305.0
12.01
32.0
1.26
109.0
4.29
109.0
4.29
174.0
6.85
12.1
26.6
99
Valves &
Accessories
MATERIAL SPECIFICATIONS
Valve Body & Disc
UViVv}-/x]x{x
12 and/or to ASTM A395 Gr. 65-45-15
Stem Seals
U",}]
*
Body Coating
U
`iV>}]L>VV
Disc Encapsulation
U>`i
*
U>`i/ i ,
Set Screw
U
-ii
Spring Pin
Seat Material
U>`i
* For service temperatures from
-34C to 93C ( -30F to 200F). Recommended
for water service, dilute acids, alkalies, oil-free
air, and many chemical services. THEY ARE NOT
RECOMMENDED FOR USE IN PETROLEUM
SERVICES.
U>`i/ i For service temperatures from
-29C to 82C ( -20F to 180F). Recommended
for petroleum products, air with oil vapors,
vegetable oils, and mineral oils. THEY ARE NOT
RECOMMENDED FOR USE IN HOT WATER
SERVICES.
Contact a GRINNELL Sales Representative for specific
recommendations on seat material.
Performance
U*ii`]V>V>,
Representative.
->i
U-}-ii
100
www.grinnell.com
D
O.D.
C
Pipe Size
Nominal
mm
Inches
350
14
A
Valves &
Accessories
Dimensions - mm Inches
O.D.
mm
Inches
355.6
14.000
178
7.00
365
14.37
224
8.82
276
10.86
242
9.50
305
12.00
Approx.
Weight
Kg.
Lbs.
59
130.0
400
406.4
178
416
248
302
242
305
67
16
450
18
500
20
600
24
16.000
457.2
18.000
508.0
20.000
609.6
24.000
7.00
203
8.00
216
8.50
254
10.00
16.38
470
18.50
527
20.75
629
24.76
9.76
283
11.14
314
12.36
368
14.49
11.89
350
13.78
383
15.08
463
17.83
9.50
242
9.50
290
11.40
290
11.40
12.00
305
12.00
412
16.20
412
16.20
147.4
86
189.2
133
292.6
160
353.0
PCD
S
K
Nominal
mm
Inches
PCD
Dia.
mm
Inches
350
14
400
16
450
18
500
20
600
24
125
4.90
140
5.50
140
5.50
165
6.50
165
6.50
Dimensions
Bolt Size
S
K
mm
mm
Inches
24.0
M12
0.94
36.6
M16
1.44
41.3
M16
1.625
52.0
M20
2.04
52.0
M20
2.04
Approx.
Weight
Kg.
Lbs.
14.9
32.8
14.9
32.8
14.9
32.8
30.5
67.1
30.5
67.1
101
Valves &
Accessories
MATERIAL
SPECIFICATIONS
Body
UViVv}
ASTM A 536, Grade 65-45-12
Shell Test
1.5 times WOG x 60 seconds, hydrostatic, at ambient
temperature
Body Coating
Seat Test
5,5 Bar (80 psi) x 60 seconds, pneumatic
U >Vi>i
Ball
U/i{->i-ii
Body Seal
U,*/
Seats
U6}/
O-Ring
Ui>i6
Stem
U
>Lii]Vi>i`]
- Type 304 Stainless Steel available
Lever Handle
U
>Lii]V>i`>V}]
- Type 304 Stainless Steel available
Gear Operator
U>>>`ii]V>L`
Pipe Size
Nominal
mm
Inches
40
1 1 2
50
2
65
2 1 2
80
3
100
4
150
6
Dimensions - mm Inches
O.D.
mm
Inches
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
130
5.12
140
5.50
159
6.25
167
6.56
240
9.45
258
10.15
86
3.39
95
3.75
132
5.20
143
5.63
94
3.70
221
8.70
178
7.00
178
7.00
265
10.43
265
10.43
265
10.43
600
23.60
32
1.25
38
1.50
50
2.00
63
2.50
90
3.50
125
4.92
Cv
Value
130
180
320
600
1020
3300
Approx.
Weight
Kg.
Lbs.
2.2
4.8
2.9
6.4
4.8
10.6
6.1
13.4
25.0
55.0
36.0
79.2
* For the first opening or closing of the valve when the valve is not continuously operated, an additional torque of 2.0 2.5 times the listed
operating torque is normally required.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
102
www.grinnell.com
Pressure
Performance
Pressure (kPa)
10,000
8,000
6,000
4,000
2,000
Valves &
Accessories
E
0
50
100
200
250
Temperature (C)
Cv =
D
Q
3
Pipe Size
Dimensions - mm Inches
Cv
Value
Approx.
Weight
Kg.
Lbs.
152
6
130
7.0
15.0
38
1.50
152
6
180
8.0
18.0
50
2.00
63
2.50
90
3.50
125
4.92
152
6
152
6
152
6
305
12
Nominal
mm
Inches
40
1 1 2
O.D.
mm
Inches
48.3
1.900
130
5.12
124
4.88
203
8
32
1.25
50
2
60.3
2.375
140
5.50
137
5.38
203
8
65
2 1 2
80
3
100
4
150
6
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
159
6.25
167
6.56
240
9.45
258
10.15
145
5.68
182
7.16
203
8.00
277
10.89
203
8
203
8
203
8
356
14
320
600
1020
3300
10.0
22.0
14.0
31.0
33.0
73.0
56.0
123.4
103
O.D. C
d
O.D.
Valves &
Accessories
11/2" - 4"
6"
Pressure-Temperature Rating
Nom.
Rating
CWP
Size
mm
Inches
40 - 80
1 1 2 - 3
100 - 150
4-6
Working
Pressure
Max. Service
Temperature
70 Bar @ 38C
1000 psi @100F
56 Bar @ 38C
800 psi @100F
Pipe Size
Nominal
mm
Inches
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
150
165.1mm
150
6
Pipe
mm
Inches
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
165.1
6.500
168.3
6.625
Working
Pressure
Bar
psi
Operating
,iU
N/m
Lb/In
70
1000
70
1000
70
1000
70
1000
70
1000
56
800
56
800
56
800
7
62
17
150
21
186
21
186
28
248
45
398
60
531
60
531
Dimensions - mm Inches
L
130
5.12
140
5.50
159
6.25
159
6.25
167
6.56
240
9.45
258
10.15
258
10.15
86
3.39
95
3.75
132
5.20
132
5.20
143
5.63
94
3.70
221
8.70
221
8.70
178
7.00
178
7.00
265
10.43
265
10.43
265
10.43
265
10.43
600
23.60
600
23.60
32
1.25
38
1.50
50
2.00
50
2.00
63
2.50
90
3.50
125
4.92
125
4.92
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
7.9
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
0.312
9.5
0.374
9.5
0.374
45.1
1.775
57.2
2.250
69.1
2.720
72.3
2.845
84.9
3.344
110.0
4.334
163.9
6.453
163.9
6.453
Approx.
Weight
Kg.
Lbs.
1.8
3.9
2.9
6.4
4.4
9.7
4.4
9.7
7.8
17.2
14.7
32.3
41.1
90.2
41.1
90.2
* When first opening or closing the valve when not continuosly operated.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
104
www.grinnell.com
MATERIAL SPECIFICATIONS
Body and End Cap:
UVi-/x]x{x>`
ASTM A 395, Gr. 65-45-15.
U/i{>iii
Seats:
U6}/
Body Seal:
U,*/
O-Ring:
Ui>i6
W
K
Lever Handle:
U
>Lii]V>i`>V}
U/i{>iii
Gear Operator:
U>>>`ii]V>L`
Performance
U*ii`]V>V>,
Representative.
->i
40 to 100mm (1 12" - 4")
150mm (6")
Pipe Size
Dimensions
Approx.
Weight
Nominal
Pipe
K
H
W
Kg.
mm
mm
mm
mm
mm
Lbs.
Inches
Inches
Inches
Inches
Inches
40
48.3
152
124
203
7.0
1.900
6
4.88
8
15.4
1 1 2
50
60.3
152
137
203
8.0
2
2.375
6
5.38
8
17.6
65
73.0
152
145
203
10.0
2 1 2
2.875
6
5.68
8
22.0
65
76.1
152
145
203
10.0
76,1mm
3.000
6
5.68
8
22.0
80
88.9
152
182
203
14.0
3
3.500
6
7.16
8
30.8
100
114.3
152
203
203
33.0
4
4.500
6
8.00
8
72.6
150
165.1
305
277
356
56.0
165,1mm
6.500
12
10.89
14
123.2
150
168.3
305
277
356
56.0
6
6.625
12
10.89
14
123.2
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
105
MATERIAL SPECIFICATIONS
Valves &
Accessories
Surface Finish:
U >ViiV`iV>}
Ball:
UiV>iii-/x
n
O.D. d
Stem:
UiV>iii-/{/i
L
Seats:
U,ivVi`*/
i>viii
Body Seal:
U*/
i>viii
Stem Hardware:
Pressure-Temperature Rating
Nom.
Rating
CWP
Working Pressure
41 Bar @38C
600 psi @100F
U/i{->i-ii
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
Pipe Size
Nominal
Pipe
mm
mm
Inches
Inches
50
60.3
2
2.375
L
mm
Inches
167
6.55
H
mm
Inches
110
4.32
Lever Handle:
U
>Lii>V}
U/i{>iii
Performance
U*ii`]V>V>,
Representative.
Dimensions
W
d
mm
mm
Inches
Inches
228
38
8.96
1.50
A
mm
Inches
83
3.25
->i
B
mm
Inches
79
3.13
Approx.
Weight
Kg.
Lbs.
3.58
7.89
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
106
www.grinnell.com
Valves &
Accessories
SPECIFICATIONS
Valve Assembly Finish
U,i`]i>`>
COVER
FLOW
Clapper
INLET
COVER
U >
OUTLET
FLOW
INLET
VERTICAL
ORIENTATION
HORIZONTAL
ORIENTATION
4,16
Description
Material
18
2
Qty.
Body
Ductile Iron
Cap
Ductile Iron
Gasket
Synthetic Fibre
Clapper
Seal Facing
EPDM Grade E
Spring
Stainless Steel
Hinge Shaft
Stainless Steel
1
AR
17
SEE
VIEW A
SEE
DETAIL B
AR
Retaining Ring
Stainless Steel
10
Washer
Teflon
11
Retention Bolt
Stainless Steel
12
Seal Ring
Neoprene
13
Retaining Disc
Stainless Steel
14
Locknut
Stainless Steel
15
Cast Iron
16
Adhesive
Thread Sealer
8
5
9
2 DN65-DN200
(2-1/2" - 8")
AR
17
Nameplate
Aluminium
18
Rivet
Steel
19
Spacer
Stainless Steel
15
VIEW A
DN250
(10")
13
13
11,16
14,16
11
12
DN65-DN200
(2-1/2" - 8")
19
5
DN250
(10")
DETAIL B
107
C
O.D.
D
1
J
1
Valves &
Accessories
595900020
595900025
595900076
595900030
595900040
595900139
595900050
595900165
595900060
595900080
595900100
595900120
2" NPT
Dimensions mm In.
Pipe Size
Part
Number
2" NPT
Nominal
DN
In.
O.D.
mm
In.
A
mm
In.
B
mm
In.
C
mm
In.
D
mm
In.
E
mm
In.
F
mm
In.
J
mm
In.
Approx.
Weight
kg
Lbs
50
2
65
2- 1 2
65
76.1mm
80
3
100
4
125
139.7mm
125
5
150
165.1mm
150
6
200
8
250
10
300
12
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
171.5
6.75
203.2
8.00
203.2
8.00
212.6
8.37
245.6
9.63
266.7
10.50
266.7
10.50
292.1
11.50
292.1
11.50
355.6
14.00
457.2
18.00
533.4
21.00
111.3
4.38
147.3
5.80
147.3
5.80
146.3
5.76
171.2
6.74
190.5
7.50
190.5
7.50
204.4
8.05
204.4
8.05
260.4
10.25
330.2
13.00
362.7
14.28
64.8
2.55
86.6
3.41
86.6
3.41
91.4
3.60
117.1
4.61
134.4
5.29
134.4
5.29
146.1
5.75
146.1
5.75
196.9
7.75
259.3
10.21
287.2
11.31
65.3
2.57
86.4
3.40
86.4
3.40
86.4
3.40
92.2
3.63
106.7
4.20
106.7
4.20
114.3
4.50
114.3
4.50
142.7
5.62
162.1
6.38
184.4
7.26
82.3
3.25
98.6
3.88
98.6
3.88
98.6
3.88
115.1
4.56
124.5
4.90
124.5
4.90
127.0
5.00
127.0
5.00
138.4
5.45
190.5
7.50
193.5
7.62
120.7
4.75
152.4
6.00
152.4
6.00
152.4
6.00
181.1
7.13
193.0
7.60
193.0
7.60
193.0
7.60
193.0
7.60
213.4
8.40
266.7
10.50
269.7
10.62
41.5
1.62
43.2
17.0
43.2
1.70
43.2
1.70
46.7
1.84
48.3
1.90
48.3
1.90
37.6
1.48
37.6
1.48
58.9
2.20
76.2
3.00
69.9
2.75
4.1
9.0
4.5
10.0
4.5
10.0
5.0
11.0
11.3
25.0
13.2
29.0
13.2
29.0
21.3
47.0
21.3
47.0
29.9
66.0
49.4
109.7
68.0
2.68
108
www.grinnell.com
The Shurjoint Model SJ-915 is a grooved-end dual-plate (or doubledoor) check valve designed to provide positive and silent protection
against backflow in piping systems. The valve features a ductile
iron body with an EPDM or Nitrile resilient seat molded to body
and type 304 stainless steel discs loaded with type 313 stainless
steel springs. Groove dimensions comply with ANSI/AWWA
C606.
Features:
U}i}}i>Vi>}ViV
valves)
U
>>>Viv}i`V}]i
economical than wafer or lugged valves
U/i`>`V`i}`Vii>i>i>}i
disc valves
U/i}>`i``V`i}`iviV}
U/iiii>i`Viii>}
U`v>iV>>>ii>>-ii
(Page 1 of 2)
Shurjoint Tech Data Sheet: J-29
Valves &
Accessories
MATERIAL SPECIFICATIONS
Valve body:
UVi]-/x]x{x>`
ASTM A 395, Gr. 65-45-15.
Discs:
U->iii>`i
n]-/x
Torsion Springs:
Pressure-Temperature Rating
U->iiii]-/
Nom.
Rating
Working Pressure
Shell
Test
Class
150
20 Bar @38C
300 psi @100F
30 Bar
450 psi
Performance
U*ii`]V>V>,
->i,iii>i
Pipe Size
Nominal
mm
Inches
65
2 1 2
80
3
100
4
150
6
200
8
250
10
300
12
Pipe
mm
Inches
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
A
mm
Inches
125
4.92
135
5.31
137
5.39
152
6.00
171
6.73
198
7.80
208
8.19
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
*Working pressure is based on connection with roll- or cutgrooved standard wall carbon steel pipe.
*Seat test: 110% the working pressure.
Dimensions
B
mm
Inches
110
4.33
125
4.92
152
5.98
204
8.03
256
10.08
307
12.09
362
14.25
C
mm
Inches
73
2.87
89
3.50
114
4.50
168
6.62
219
8.62
273
10.75
324
12.75
Approx.
Weight
Kg.
Lbs.
2.3
5.0
2.5
5.5
3.8
8.4
7.6
11.7
12.4
27.3
20.7
45.5
28.3
62.2
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
109
(Page 2 of 2)
Shurjoint Tech Data Sheet: J-26
Valves &
Accessories
Features
U}i}}i>Vi>}
check valves)
U
>>>Viv}i`V}]i
economical than wafer or lugged valves
U/i`>`V`i}`Vii>i>i>
single disc valves
U/i}>`i``V`i}`iviV}
U/ivi`LLiL`>`vi>i`Vii>`
maintenance
MATERIAL SPECIFICATIONS
Body:
A
B
U/i>iL`>`iv`Vii-/x]
Gr. 65-45-12 and or ASTM A395, Gr. 65-45-15,
minimum tensile strength 4481 Bar (65,000 psi).
Body Lining:
E
C
D
O.D.
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
Class
150
17 Bar @38C
250 psi @100F
Shell
Test
26 Bar
400 psi
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
*Working pressure is based on connection with roll- or cutgrooved standard wall carbon steel pipe.
*Seat test: 110% the working pressure.
Pipe Size
Nominal
Pipe
mm
mm
Inches
Inches
350
355.6
14
14.000
400
406.4
16
16.000
450
457.2
18
18.000
500
508.0
20
20.000
600
609.6
24
24.000
A
mm
Inches
368
14.49
410
16.14
461
18.15
509
20.04
610
24.00
B
mm
Inches
329
12.96
359
14.13
417
16.42
460
18.11
562
22.13
Washer:
U*/
Performance
U*ii`]V>V>,
Representative.
Dimensions
C
mm
Inches
184
7- 14
191
7- 1 2
203
8
219
8- 5 8
222
8- 3 4
D
mm
Inches
283
11.14
310
12.20
364
14.33
408
16.06
457
18.00
->i
E
mm
Inches
154
6.06
173
6.81
203
8.00
226
8.80
249
9.80
Approx.
Weight
Kg.
Lbs.
46.0
101.2
54.0
118.8
77.0
169.4
96.0
211.2
131.0
288.2
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
110
www.grinnell.com
Flow Rate
GPM
LPM
0.687 - 1.110
2.6 - 4.2
0.898 - 1.638
3.4 - 6.2
1.638 - 2.536
6.2 - 9.6
2.483 - 5.548
9.4 - 21.0
3.96 - 7.93
15 - 30
5.812 - 11.096
22 - 42
10.30 - 28.01
39 - 106
10.30 - 28.01
39 - 106
15.85 - 34.87
60 - 132
26.42 - 57.33
100 - 217
29.59 - 83.75
112 - 317
29.59 - 83.75
112 - 317
58.12 - 115.46
220 - 437
58.12 - 115.46
220 - 437
58.92 - 232.76
223 - 881
77.15 - 342.93
292 - 1298
162.75 - 457.33
616 - 1731
Connection
Type
MATERIAL SPECIFICATIONS
Body
U-ixqx( 12" 2") solder or BSP threaded
connection: brass-resistant to dezincification (DZR)
U-ixq (2 12" 12"), grooved or flanged
connection: Cast Iron conforming to
ASME ANSI B 16.5
Valves &
Accessories
O-Ring
U
*
Handwheel
U/i>V
For accessories and replacement parts contact a
GRINNELL Sales Representative for details.
Valve Sizing
Thread or
Solder
Flanged or
Grooved
3D
2D Pump
10D
2D
111
Valves &
Accessories
Pipe Size
Part
Number
CB8000505
CB8000755
CB8001005
CB8001255
CB8001505
CB8002005
Nominal
mm
Inches
15
1
2
20
3
4
25
1
32
1 1 4
40
1 1 2
50
2
O.D.
mm
Inches
21.3
0.840
26.9
1.050
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
Dimensions
L
H
mm
mm
Inches
Inches
79.5
104.9
3.13
4.13
84.1
115.8
3.31
4.56
85.6
119.1
3.38
4.69
111.3
136.7
4.38
5.38
120.7
138.2
4.75
5.44
150.9
147.6
5.94
5.81
Approx. Weight
Kg.
Lbs.
Limits
PN/C
PSI/F
0.6
1.4
0.6
1.4
1.0
2.2
1.4
3.0
1.7
3.9
2.6
5.6
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
Handwheel
Turns
7
7
7
10
10
10
112
www.grinnell.com
OD
Valves &
Accessories
Part
Number
CB8002504
CB8007604
CB8003004
CB8004004
CB8001394
CB8005004
CB8001654
CB8006004
CB8008004
CB8001104
CB8001204
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
73.0
65
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.1
10
10.750
300
323.9
12
12.750
Dimensions
L
H
mm
mm
Inches
Inches
290.6
187.5
11.44
7.38
290.6
187.5
11.44
7.38
311.2
203.2
12.25
8.00
349.3
239.8
13.75
9.44
400.0
282.7
15.75
11.13
400.0
282.7
15.75
11.13
479.6
285.8
18.88
11.25
479.6
285.8
18.88
11.25
600.2
468.4
23.63
18.44
730.3
479.6
28.75
18.88
849.4
514.4
33.44
20.25
Approx. Weight
Kg.
Lbs.
Limits
PN/C
PSI/F
8.5
18.7
8.5
18.7
12.5
27.5
20.5
45.1
32.0
70.4
32.0
70.4
43.5
95.7
43.5
95.7
116.0
255.2
171.0
376.2
136.0
519.2
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
20.7/150
300/300
Handwheel
Turns
8
8
8
8
8
8
8
8
12
12
12
113
Valves &
Accessories
Pipe Size
Part
Number
CB8002506
CB8003006
CB8004006
CB8005006
CB8006006
CB8008006
CB8001106
CB8001206
Dimensions
Nominal
mm
Inches
O.D.
mm
Inches
L
mm
Inches
H
mm
Inches
D
mm
Inches
Approx.
Weight
Kg.
Lbs.
Limits
PN/C
PSI/F
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.1
10.750
323.9
12.750
290
11.4
310
12.2
350
13.8
400
15.7
480
18.9
600
23.6
730
28.7
850
33.5
188
7.4
203
8.0
240
9.4
283
11.1
285
11.2
467
18.4
480
18.9
515
20.3
185
7.3
200
7.9
220
8.7
250
9.8
285
11.2
340
13.4
405
15.9
460
18.1
13.5
18.7
18.0
39.6
28.0
61.6
40.5
89.1
51.5
113.3
129.5
284.9
196.0
431.2
264.0
580.8
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
Handwheel
Turns
8
8
8
8
8
12
12
12
114
www.grinnell.com
Pipe Size
Part
Number
CB8002503
CB8003003
CB8004003
CB8005003
CB8006003
CB8008003
CB8001103
CB8001203
Dimensions
Nominal
mm
Inches
O.D.
mm
Inches
L
mm
Inches
H
mm
Inches
D
mm
Inches
Approx.
Weight
Kg.
Lbs.
Limits
PN/C
PSI/F
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.1
10.750
323.9
12.750
290
11.4
310
12.2
350
13.8
400
15.7
480
18.9
600
23.6
730
28.7
850
33.5
188
7.4
203
8.0
240
9.4
283
11.1
285
11.2
467
18.4
480
18.9
515
20.3
185
7.3
200
7.9
220
8.7
250
9.8
285
11.2
340
13.4
405
15.9
485
19.1
13.5
18.7
18.0
39.6
28.0
61.6
40.5
89.1
51.5
113.3
129.5
284.9
196.0
431.2
264.0
580.8
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
Handwheel
Turns
8
8
8
8
8
12
12
12
115
Valves &
Accessories
Pipe Size
Nominal
mm
Inches
15
1
2
20
3
4
25
1
32
1 1 4
40
1 1 2
50
2
Dimensions
O.D.
mm
Inches
21.3
0.840
26.9
1.050
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
L
mm
Inches
88.9
3.50
96.8
3.81
109.5
4.31
128.5
5.06
141.2
5.56
166.6
6.56
H
mm
Inches
114.3
4.50
115.8
4.56
119.1
4.69
136.7
5.38
138.2
5.44
147.6
5.81
Approx. Weight
Kg.
Lbs.
Limits
PN/C
PSI/F
0.6
1.4
0.6
1.4
1.0
2.2
1.4
3.0
1.7
3.9
2.6
5.6
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
Handwheel Turns
7
7
7
10
10
10
116
www.grinnell.com
D
mm
Inches
69
2.72
77
3.31
85
3.35
97
3.82
105
4.13
120
4.72
260
10.2
280
11.0
320
12.6
360
14.2
400
15.7
450
17.6
Dimensions
H
mm
Inches
136
5.35
143
5.63
151
5.94
172
6.77
185
7.28
209
8.23
410
16.1
415
16.3
520
20.5
560
22.1
600
23.6
760
30.0
L
mm
Inches
183
7.20
195
7.68
243
9.57
254
10.00
250
9.84
276
10.87
505
19.9
530
20.9
580
22.8
620
24.4
730
28.7
800
31.5
Approx.
Weight
Kg.
Lbs.
0.15
0.3
0.18
0.4
0.22
0.5
0.20
0.4
0.33
0.7
0.43
0.9
3.06
6.7
3.25
7.2
5.16
11.4
5.24
11.6
5.97
13.2
Sizes
15 50mm
( 12" 2" )
Valves &
Accessories
H
D
L
Sizes
65 200mm
( 212" 8" )
H
D
117
Description:
U"i}ii`i`ii}>*
complete with 2 extended pressure test points.
Application:
U"i}ii`i`ii}>>i>i`
in the pipework of hot water heating and chilled water
systems to obtain flow measurements.
U >}iiv`
U>ii\L>232 psi)
Valves &
Accessories
U/ii>i>}i\c
xc
14F to 302F)
Materials:
U Vi>i`iiL`
J
U<,i
Signal p [mbar]
65 80
100
9
8
7
6
5
100
9
8
7
6
5
Pipe Size
Part
Number
7060751
7060752
Signal p [mbar]
DN
1000
9
8
7
6
5
U i\/L>>>VV>Vvx]i
recommended a minimum of 5 diameters of straight,
valve sized, pipe on the inlet of the metering station
and 3 diameters on the outlet.
7060753
7060754
7060755
7060756
7060757
10
9
8
7
6
5
10
9
8
7
6
5
4
1
3 4 5 6 7 8 10
3 4 5 6 7 8 100
3 4 5
7060758
Nominal
mm
Inches
O.D.
mm
Inches
65
76.1
76.1mm 3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139.7mm 5.500
150
165.1
165.1mm 6.500
200
219.1
8
8.625
250
273.1
10
10.750
300
323.9
12
12.750
Dimensions - mm Inches
A
80
108
3.15 4.25
80
125
3.15 4.92
80
147
3.15 5.79
80
175
3.15 6.89
80
202
3.15 7.95
100
251
3.94 9.88
100
300
3.94 11.81
100
345
3.94 13.58
76.1
3.00
88.9
3.50
114.3
4.50
139.7
5.50
165.1
6.50
219.1
8.63
273.1
10.75
323.9
12.75
Kv
195
102
7.68
212
120
8.35
234
234
9.21
262
335
10.31
289
522
11.38
338
780
13.31
387
1197
15.24
432
1810
17.01
118
www.grinnell.com
Metal
Identification
Tag
Pipe Size
Part
Number
K010000734
K015000894
K020000894
Pump
Capacity
LPM
GPM
Flow Range
LPM
GPM
A
mm
In.
34.5
500
379
100
568
150
757
200
946
250
1.136
300
1.703
450
1.893
500
2.839
750
3.785
1,000
4.731
1,250
189-757
50-200
284-1135
75-300
378-1514
100-400
473-1892
125-500
567-2271
150-600
851-3406
225-900
946-3785
250-1000
1419-5677
375-1500
1892-7570
500-2000
2365-9462
625-2500
101.6
4.00
111.1
4.37
111.1
4.37
95.3
3.75
95.3
3.75
95.3
3.75
127
5.00
152.4
6.00
152.4
6.00
152.4
6.00
5.678
2838-11355
177.8
1095
438
10.5
23.1
Nominal
DN
In.
65
2- 1 2
O.D.
mm
In.
73.0
2.875
80
3
88.9
3.500
34.5
500
100
4
114.3
4.500
34.5
500
125
5
141.3
5.563
34.5
500
150
6
168.3
6.625
34.5
500
K025001144
K030001144
K045001144
K050001414
K075001684
K100001684
K125001684
K150002194
K200002194
200
8
219.1
8.625
34.5
500
K250002194
K300002194
K350002734
K400002734
250
10
273.0
10.750
34.5
500
K450002734
K500003244
Max. Wk
Pressure
Bar
psi
Approx
Weight
Kg.
Lbs.
4.0
8.8
8.0
17.6
8.0
17.6
8.0
17.6
8.0
17.6
8.0
17.6
8.5
18.7
8.5
18.7
8.5
18.7
8.5
18.7
1,500
750-3000
7.00
43.11
17.24
7.570
3785-15140
177.8
1095
438
10.5
2,000
1000-4000
7.00
43.11
17.24
23.1
9.463
4731-18925
177.8
1095
438
10.5
2,500
1250-5000
7.00
43.11
17.24
23.1
11.355
5677-22710
177.8
1095
438
10.5
3,000
1500-6000
7.00
43.11
17.24
23.1
13.248
6623-26495
203.2
1365
546
13.0
3,500
1750-7000
8.00
53.74
21.50
28.7
15.140
7570-30280
203.2
1365
546
13.0
4,000
2000-8000
8.00
53.74
21.50
28.7
17.033
8516-34065
203.2
1365
546
13.0
4,500
2250-9000
8.00
53.74
21.50
28.7
300
323.9
34.5
18.925
9462-37850
304.8
1620
648
18.0
12
12.750
500
5,000
2500-10000
12.00
63.78
25.51
39.7
Valves &
Accessories
Note: End Connections: provided with butt weld and grooved ends
Gauge: 114mm (4 1 2" ) dual scale LPM/GPM
Body material: Steel
Approval: FM
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
119
MATERIAL SPECIFICATIONS
Body
UViVv}-/x]
Grade 65-45-12. Colour: Red
Strainer Basket
U->iii{ >>`iiViii
1.6 mm (0.06")in sizes 50 to 80mm (2" to 3"
3.2mm (0.16") in sizes 100 to 300mm (4" to 12")
For other mesh sizes contact GRINNELL.
Bolts/Nuts
Ui>i>i`]>iV>Vi>`L>`i>
hex nuts conforming to ASTM A-183 with a minimum
tensile7584 Bar (110,000 psi). Zinc electroplated as
standard.
Coupling Gasket
Valves &
Accessories
Drain Plug
U
>Lii>VV`} -
Performance
U*ii`]V>V>,
Pipe Size
Part
Number
760F00060
760F00073
760F00076
760F00088
760F00114
760F00139
760F00165
760F00168
760F00219
760F00273
760F00324
->i,iii>i
Nominal
mm
Inches
O.D.
mm
Inches
Max. Wk
Pressure*
Bar
psi
A
mm
Inches
B
mm
Inches
Drain Plug
Size NPT
mm
Inches
Cv
Values**
LPM
GPM
Kv
Values**
m3/h
GPM
Approx
Weight
Kg.
Lbs.
50
2
65
2 1 2
65
76.1mm
80
3
100
4
125
139,7mm
150
165,1mm
150
6
200
8
250
10
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
165.1
6.500
168.3
6.625
219.1
8.625
273.1
10.750
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
248
9.76
173
6.81
273
10.75
299
11.77
362
14.25
419
16.50
470
18.50
470
18.50
610
24.02
686
27.01
192
7.56
211
8.31
211
8.31
231
9.09
281
11.06
330
12.99
367
14.45
367
14.45
467
18.39
559
22.01
12.7
0.5
12.7
0.5
12.7
0.5
25.4
1
25.4
1
25.4
1
38.1
1.5
38.1
1.5
38.1
1.5
38.1
1.5
52
13.7
83
21.9
83
21.9
149
39.4
273
72.1
419
110.7
718
189.7
718
189.7
946
249.9
1709
451.5
45
198
72
317
72
317
129
568
236
1,039
363
1,598
621
2,734
621
2,734
818
3,602
1478
6,507
4.5
9.9
5.9
13.0
5.9
13.0
8.2
18.1
12.7
28.0
22.0
48.5
31.8
70.1
31.8
70.1
52.3
115.3
90.0
198.4
300
323.9
20.7
762
629
38.1
2680
2318
120.0
12
12.750
300
30.00
24.76
1.5
708.1
10,206
264.6
* Maximum working pressure is based upon the performance capability of the GRINNELL WYE-Strainer. Maximum system working pressure
is dependant upon the rigid couplings used for installation and the pressure capacity of the system components.
** Cv values are for flow of water at 16 C (60 F )
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
120
www.grinnell.com
Valves &
Accessories
D
B
Note: Other perforation screen sizes are available upon request. Specify
particle retention size when ordering nonstandard screens.
MATERIAL SPECIFICATIONS
Ductile Iron Body and Cover
U-/x]>`i{nxq
Standard specification for ductile iron castings
U/iii}]{{nL> (65,000 psi)
U9i`i}]L>(45,000 psi)
U
}>x(2"), minimum 12%
Screen
U}>}ii{>iii-/{
for Sizes 50 150mm (2" 6")
Un}>}ii{>iii-/{
for Sizes 200 300mm (8" 12")
Coating
U >Vi>i>
U">}iq i>`>
U,i`q i>`>>]i}>
Performance
U*ii`]V>V,
Mechanical Products.
Pipe Size
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Dimensions - mm Inches
D
A
B
Screen
Removal
165.0
108.0
191.0
6.50
4.25
7.50
191.0
110.0
222.0
7.50
4.75
8.75
216.0
133.0
254.0
8.50
5.25
10.00
254.0
156.0
305.0
10.00
6.13
12.00
279.0
168.0
342.0
11.00
6.63
13.50
330.0
194.0
406.0
13.00
7.63
16.00
394.0
232.0
494.0
15.50
9.13
19.44
457.0
264.0
583.0
18.00
10.38
22.94
508.0
289.0
659.0
20.00
11.38
25.94
Approx.
Weight
Kg.
Lbs.
2.7
6.0
5.0
11.0
5.4
12.0
9.0
20.0
13.0
30.0
18.0
40.0
36.0
81.0
57.0
126.0
79.0
174.0
121
Valves &
Accessories
MATERIAL SPECIFICATIONS
Body and Cover
UViVv}-/
Knobs
UViVv}-/x]>`i
65-45-12 for sizes 80mm x 50mm thru 250mm x
200mm (3" x 2" thru 10" x 8")
Stud/nuts carbon steel conforming to ASTM A 193-4,
for sizes 250mm x 250mm (10" x 10") and larger
Screen
B
C
U-iiiii{>iii
Coating
U >Vi>i>
Performance
U*ii`]V>V,
Mechanical Products.
D
E
Pipe Size
Nominal
mm
Inches
50 x 50
2x2
65 x 50
2 1 2 x 2
65 x 65
2 1 2 x 2 1 2
80 x 50
3x2
80 x 65
3 x 2 1 2
122
O.D.
mm
Inches
60.3 x 60.3
2.375 x 2.375
73.0 x 60.3
2.875 x 2.375
73.0 x 73.0
2.875 x 2.875
88.9 x 60.3
3.500 x 2.375
88.9 x 73.0
3.500 x 2.875
Dimensions - mm Inches
A
114.3
4.50
127.0
5.00
127.0
5.00
139.7
5.50
139.7
5.50
114.3
4.50
127.0
5.00
127.0
5.00
139.7
5.50
139.7
5.50
169.9
6.69
190.5
7.50
190.5
7.50
214.4
8.44
214.4
8.44
155.7
6.13
166.6
6.56
166.6
6.56
187.5
7.38
187.5
7.38
258.8
10.19
276.4
10.88
276.4
10.88
293.6
11.56
293.6
11.56
F
Screen
Removal
223.8
8.81
231.9
9.13
231.9
9.13
244.6
9.63
244.6
9.63
G
Plug
NPT
20
0.75
20
0.75
20
0.75
20
0.75
20
0.75
Approx.
Weight
H
kg
Pipe
Support ID Lbs.
20.9
8.6
0.824
19
35.1
9.1
1.38
20
35.1
10.0
1.38
22
35.1
17.2
1.38
38.0
35.1
17.7
1.38
39.0
www.grinnell.com
Pipe Size
Nominal
mm
Inches
80 x 80
3x3
100 x 50
4x2
100 x 65
4 x 2 1 2
100 x 80
4x3
100 x 100
4x4
125 x 80
5x3
125 x 100
5x4
125 x 125
5x5
150 x 80
6x3
150 x 100
6x4
150 x 125
6x5
150 x 150
6x6
200 x 125
8x5
200 x 150
8x6
200 x 200
8x8
250 x 150
10 x 6
250 x 200
10 x 8
250 x 250
10 x 10
300 x 200
12 x 8
300 x 250
12 x 10
300 x 300
12 x 12
350 x 250
14 x 10
350 x 300
14 x 12
350 x 350
14 x 14
400 x 350
16 x 14
O.D.
mm
Inches
88.9 x 88.9
3.500 x 3.500
114.3 x 60.3
4.500 x 2.375
114.3 x 73.0
4.500 x 2.875
114.3 x 88.9
4.500 x 3.500
114.3 x 114.3
4.500 x 4.500
141.3 x 88.9
5.563 x 3.500
141.3 x 114.3
5.563 x 4.500
141.3 x 141.3
5.563 x 5.563
168.3 x 88.9
6.625 x 3.500
168.3 x 114.3
6.625 x 4.500
168.3 x 141.3
6.625 x 5.563
168.3 x 168.3
6.625 x 6.625
219.1 x 141.3
8.625 x 5.563
219.1 x 168.3
8.625 x 6.625
219.1 x 219.1
8.625 x 8.625
273.1 x 168.3
10.750 x 6.625
237.1 x 219.1
10.750 x 8.625
273.1 x 273.1
10.750 x 10.750
323.9 x 219.1
12.000 x 8.625
323.9 x 273.1
12.000 x 10.750
323.9 x 323.9
12.000 x 12.000
355.6 x 273.1
14.000 x 10.750
355.6 x 323.9
14.000 x 12.000
355.6 x 355.6
14.000 x 14000
406.4 x 355.6
16.000 x 14.000
Dimensions - mm Inches
A
139.7
5.50
146.1
5.75
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
165.1
6.50
190.5
7.50
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
228.6
9.00
228.6
9.00
228.6
9.00
240.8
9.48
228.6
9.00
279.4
11.00
228.6
9.00
279.4
11.00
304.8
12.00
279.4
11.00
304.8
12.00
355.6
14.00
355.6
14.00
139.7
5.50
146.1
5.75
165.1
6.50
173.0
6.81
173.0
6.81
165.1
6.50
165.1
6.50
190.5
7.50
203.2
8.00
203.2
8.00
203.2
8.00
203.2
8.00
228.6
9.00
254.0
10.00
254.0
10.00
240.8
9.48
298.5
11.75
298.5
11.75
228.6
9.00
327.2
12.88
304.8
12.00
279.4
11.00
304.8
12.00
355.6
14.00
355.6
14.00
214.4
8.44
231.9
9.13
266.2
10.48
265.2
10.44
265.2
10.44
266.2
10.48
303.3
11.94
303.3
11.94
338.1
13.31
338.1
13.31
338.1
13.31
338.1
13.31
365.3
14.38
388.9
15.31
414.3
16.31
393.7
15.50
468.4
18.44
508.0
20.00
498.6
19.63
533.4
21.00
560.3
22.06
571.5
22.50
568.5
22.38
635.0
25.00
660.4
26.00
187.5
7.38
193.8
7.63
222.3
8.75
222.3
8.75
222.3
8.75
222.3
8.75
254.0
10.00
254.0
10.00
266.7
10.50
266.7
10.50
266.7
10.50
266.7
10.50
292.1
11.50
292.1
11.50
298.5
11.75
303.3
11.94
298.5
11.75
355.6
14.00
298.5
11.75
355.6
14.00
387.4
15.25
355.6
14.00
387.4
15.25
444.5
17.50
444.5
17.50
293.6
11.56
300.0
11.81
333.5
13.13
333.5
13.13
333.5
13.13
333.5
13.13
400.1
15.75
400.1
15.75
428.8
16.88
428.8
16.88
428.8
16.88
428.8
16.88
454.2
17.88
454.2
17.88
527.1
20.75
465.1
18.31
527.1
20.75
670.1
26.38
527.1
20.75
670.1
26.38
665.0
26.18
670.1
26.38
665.0
26.18
704.9
27.75
708.2
27.88
F
Screen
Removal
244.6
9.63
284.0
11.18
244.6
9.63
292.1
11.50
292.1
11.50
292.1
11.50
355.6
14.00
378.0
14.88
420.6
16.56
420.6
16.56
420.6
16.56
420.6
16.56
428.8
16.88
428.8
16.88
581.2
22.88
428.8
16.88
581.2
22.88
781.1
30.75
581.2
22.88
781.1
30.75
781.1
30.75
781.1
30.75
787.4
31.00
841.5
33.13
787.4
31.00
G
Plug
NPT
20
0.75
20
0.75
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
50
2.00
50
2.00
Approx.
Weight
H
kg
Pipe
Support ID Lbs.
35.1
18.1
1.38
40.0
35.1
21.8
1.38
48.0
35.1
22.2
1.38
49.0
35.1
22.7
1.38
50.0
35.1
23.6
1.38
52.0
35.1
42.6
1.38
94.0
35.1
43.5
1.38
96.0
35.1
45.8
1.38
101.0
35.1
46.7
1.38
103.0
35.1
48.1
1.38
106.0
35.1
49.9
1.38
110.0
35.1
51.2
1.38
113.0
35.1
61.2
1.38
135.0
35.1
62.1
1.38
137.0
35.1
100.7
1.38
222.0
35.1
104.3
1.38
230.0
35.1
107.0
1.38
236.0
35.1
155.6
1.38
343.0
35.1
161.9
1.38
357.0
35.1
161.9
1.38
357.0
35.1
161.9
1.38
357.0
35.1
229.9
1.38
507.0
35.1
272.6
1.38
601.0
35.1
320.2
1.38
706.0
35.1
340.1
1.38
750.0
Valves &
Accessories
123
Valves &
Accessories
GRINNELL Grooved Expansion Joints are customdesigned, thermal movement solutions that utilize the
proven design characteristics of GRINNELL Flexible
Couplings.
Ordering Procedure
GRINNELL Mechanical Products are available globally
through a network of distribution centres. Visit
www.grinnell.com for the nearest distributor. When
placing an order, indicate the full product name.
Use the worksheet shown below to specify information
required for ordering expansion joints.
Specify quantity, nominal pipe size, (ANSI or O.D.),
figure number (Figure 7550 Flexible Coupling), and type
of gasket:
r (SBEFi&u&1%.
r (SBEFi-u4JMJDPOF
r (SBEFi0u'MVPSPFMBTUPNFS
Coupling
Finish
Gasket
Material*
Factory
Preset
Total
Required
Movement:
r (SBEFi5u/JUSJMF
Pipe
Finish
Black
Galvanised
Stainless Steel
Orange
Paint
RAL Red
Galvanised
Stainless
Steel
Grade E
EPDM
Grade T
Nitrile
Grade O
Fluoroelastomer
Grade L
Silicone
Fully
Expanded
Fully
Compressed
25.4mm
31.8mm
38.1mm
44.5mm
1.00"
1.25"
1.50"
1.75"
Intermediate**
%
124
www.grinnell.com
Dimensions - mm Inches
Nominal
mm
Inches
O.D.
mm
Inches
Y
Coupling
Length
W
Overall
Width
Coupling
Movement
Capability
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
106.4
4.190
112.8
4.440
124.0
4.880
139.7
5.500
165.1
6.500
196.9
7.750
247.7
9.750
271.5
10.690
344.4
13.560
416.1
16.380
479.6
18.880
517.7
20.380
575.1
22.640
247.7
9.750
244.5
9.625
276.2
10.875
273.1
10.750
298.5
11.750
328.6
12.937
362.0
14.250
393.7
15.500
463.6
18.250
511.2
20.125
568.3
22.375
612.8
24.125
707.9
27.870
3.18
0.125
3.18
0.125
3.18
0.125
3.18
0.125
3.18
0.125
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
W
Y
Valves &
Accessories
Refer to Technical Data Sheet G460 for additional dimensions and information.
For instructions on part numbers, ordering information, and availability, refer to page
15 or contact a GRINNELL Sales Representative.
EXPANSION
JOINT
DO NOT ALLOW
SUPPORT CRADLE FLANGES TO
INTERFERE WITH COUPLING
LOBES, NUTS OR BOLTS
ENSURE SUPPORT
CRADLE FLANGES CONTACT
ONLY TANGENT TO
COUPLING HOUSINGS
EXPANSION
JOINT
SUPPORT
CRADLE
(FABRICATED
BY OTHERS)
RETAINING
BRACKET
Figure 7550 Expansion Joints
Retaining Bracket Detail
EXPANSION JOINT
Figure 7550 Expansion Joints
Typical Installation
ANCHOR
END COUPLINGS
(NOT INCLUDED)
GUIDES
ANCHOR
125
L
Z
Flexible*
Coupling
Figure /
Quantity
X
Coupling
Height
mm
Inches
65.02
2.560
Z
Tie
Location
mm
Inches
31.75
1.25
L
Compressed
Length
mm
Inches
676.27
26.625
L
Expanded
Length
mm
Inches
701.67
27.625
Total
Movement
Capability
mm
Inches
25.40
1.000
Approx.
Weight
Kg.
Lbs.
ANSI
mm
Inches
O.D.
mm
Inches
32
1 1 4
42.4
1.660
705 / 8
40
1 1 2
48.3
1.900
705 / 8
69.85
2.750
31.75
1.25
676.27
26.625
701.67
27.625
25.40
1.000
12.7
28
50
2
60.3
2.375
705 / 8
82.55
3.250
31.75
1.25
676.27
26.625
701.67
27.625
25.40
1.000
14.1
31
65
2 1 2
73.0
2.875
705 / 8
93.73
3.690
31.75
1.25
676.27
26.625
701.67
27.625
25.40
1.000
16.8
37
80
3
88.9
3.500
705 / 8
111.25
4.380
31.75
1.25
676.27
26.625
701.67
27.625
25.40
1.000
22.2
49
100
4
114.3
4.500
705 / 4
144.53
5.690
31.75
1.25
444.50
17.500
469.90
18.500
25.40
1.000
16.3
36
125
5
141.3
5.563
705 / 4
174.75
6.880
31.75
1.25
444.50
17.500
469.90
18.500
25.40
1.000
24.0
53
150
6
168.3
6.625
705 / 4
201.68
7.940
31.75
1.25
444.50
17.500
469.90
18.500
25.40
1.000
26.8
59
200
8
219.1
8.625
705 / 4
258.83
10.190
34.93
1.375
488.95
19.125
511.17
20.125
25.40
1.000
47.2
104
250
10
273.0
10.750
705 / 4
322.33
12.690
34.93
1.375
546.10
21.500
571.50
22.500
25.40
1.000
81.2
179
300
12
323.9
12.750
705 / 4
379.48
14.940
34.93
1.375
546.10
21.500
571.50
22.500
25.40
1.000
106.6
235
350
14
355.6
14.000
707 / 4
423.42
16.670
38.10
1.500
587.40
23.125
612.77
24.125
25.40
1.000
138.4
305
400
16
406.4
16.000
707 / 4
478.28
18.830
38.10
1.500
612.77
24.125
638.17
25.125
25.40
1.000
168.2
371
11.8
26
* 32 to 200mm (1 14" - 8" ) Figure 405 Stainless Steel Couplings available upon request.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
126
www.grinnell.com
L
Z
O.D.
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
Flexible*
Coupling
Figure /
Quantity
705 / 10
705 / 10
705 / 10
705 / 10
705 / 10
705 / 5
705 / 5
705 / 5
705 / 5
705 / 5
705 / 5
707 / 5
707 / 5
X
Coupling
Height
mm
Inches
65.02
2.560
69.85
2.750
82.55
3.250
93.73
3.690
111.25
4.380
144.53
5.690
174.75
6.880
201.68
7.940
258.83
10.190
322.33
12.690
379.48
14.940
423.42
16.670
478.28
18.830
Z
Tie
Location
mm
Inches
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
34.93
1.375
34.93
1.375
34.93
1.375
38.10
1.500
38.10
1.500
L
Compressed
Length
mm
Inches
796.92
31.375
796.92
31.375
796.92
31.375
796.92
31.375
796.92
31.375
508.00
20.000
508.00
20.000
508.00
20.000
558.80
22.000
622.30
24.500
622.30
24.500
673.10
26.500
698.50
27.500
L
Expanded
Length
mm
Inches
828.67
32.625
828.67
32.625
828.67
32.625
828.67
32.625
828.67
32.625
539.75
21.250
539.75
21.250
539.75
21.250
590.55
23.250
654.05
25.750
654.05
25.750
704.85
27.750
730.25
28.750
Total
Movement
Capability
mm
Inches
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
31.75
1.250
Valves &
Accessories
Approx.
Weight
Kg.
Lbs.
14.1
31
15.0
33
16.8
37
20.4
45
26.8
59
19.5
43
29.0
64
31.8
70
56.7
125
97.5
215
127.5
281
138.4
365
168.2
441
* 32 to 200mm (1 4" - 8" ) Figure 405 Stainless Steel Couplings available upon request.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
127
L
Z
O.D.
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
2 1 2
80
3
100
4
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
125
5
150
6
200
8
250
10
300
12
350
14
400
16
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
Flexible*
Coupling
Figure /
Quantity
705 / 12
705 / 12
705 / 12
705 / 12
705 / 12
705 / 6
705 / 6
705 / 6
705 / 6
705 / 6
705 / 6
707/ 6
707 / 6
X
Coupling
Height
mm
Inches
65.02
2.560
69.85
2.750
82.55
3.250
93.73
3.690
111.25
4.380
144.53
5.690
Z
Tie
Location
mm
Inches
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
L
Compressed
Length
mm
Inches
917.57
36.125
917.57
36.125
917.57
36.125
917.57
36.125
917.57
36.125
571.50)
22.500
L
Expanded
Length
mm
Inches
955.68
37.625
955.68
37.625
955.68
37.625
955.68
37.625
955.68
37.625
609.60)
24.000
Total
Movement
Capability
mm
Inches
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
174.75
6.880
201.68
7.940
258.83
10.190
322.33
12.690
379.48
14.940
423.42
16.670
478.28
18.830
31.75
1.25
31.75
1.25
34.93
1.375
34.93
1.375
34.93
1.375
38.10
1.500
38.10
1.500
571.50
22.500
571.50
22.500
631.82
24.875
698.50
27.500
698.50
27.500
758.82
29.875
784.22
30.875
609.60
24.000
609.60
24.000
669.93
26.375
736.60
29.000
736.60
29.000
796.93
31.375
822.32
32.375
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
38.10
1.500
Approx.
Weight
Kg.
Lbs.
16.8
37
17.7
39
19.5
43
23.6
52
31.3
69
22.7)
50
33.6
74
36.7
81
65.8
145
113.8
251
148.8
328
192.8
425
232.2
512
* 32 to 200mm (1 14" - 8" ) Figure 405 Stainless Steel Couplings available upon request.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
128
www.grinnell.com
L
Z
O.D.
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
Flexible*
Coupling
Figure /
Quantity
705 / 14
705 / 14
705 / 14
705 / 14
705 / 14
705 / 7
705 / 7
705 / 7
705 / 7
705 / 7
705 / 7
707 / 7
707 / 7
X
Coupling
Height
mm
Inches
65.02
2.560
69.85
2.750
82.55
3.250
93.73
3.690
111.25
4.380
144.53
5.690
174.75
6.880
201.68
7.940
258.83
10.190
322.33
12.690
379.48
14.940
423.42
16.670
478.28
18.830
Z
Tie
Location
mm
Inches
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
31.75
1.25
34.93
1.375
34.93
1.375
34.93
1.375
38.10
1.500
38.10
1.500
L
Compressed
Length
mm
Inches
1038.22
40.875
1038.22
40.875
1038.22
40.875
1038.22
40.875
1038.22
40.875
635.00
25.000
635.00
25.000
635.00
25.000
704.85
27.750
774.70
30.500
774.70
30.500
844.55
33.250
869.95
34.250
L
Expanded
Length
mm
Inches
1082.67
42.625
1082.67
42.625
1082.67
42.625
1082.67
42.625
1082.67
42.625
679.45
26.750
679.45
26.750
679.45
26.750
749.30
29.500
819.15
32.250
819.15
32.250
889.00
35.000
914.40
36.000
Total
Movement
Capability
mm
Inches
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
44.45
1.750
Valves &
Accessories
Approx.
Weight
Kg.
Lbs.
19.0
42
20.4
45
22.2
49
27.2
60
35.8
79
25.9
57
38.1
84
41.7
92
75.3
166
130.2
287
170.1
375
220.5
486
264.4
583
* 32 to 200mm (1 14" - 8" ) Figure 405 Stainless Steel Couplings available upon request.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
129
Bellow
U->i-ii
A
Valves &
Accessories
B OD
Pipe Size
Part
Number
RXAG034
RXAG042
RXAG048
RXAG060
RXAG073
RXAG076
RXAG089
RXAG114
RXAG139
RXAG141
RXAG165
RXAG168
RXAG219
RXAG273
A
mm
Inches
B
mm
Inches
Rated
Movement
L
mm
Inches
Spring
Rate
N/mm
Lbs/In.
Approx.
Weight
Kg.
Lbs.
Nominal
mm
Inches
O.D.
mm
Inches
Max. Wk
Pressure
Bar
psi
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
165,1mm
150
6
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
525
20.67
88.9
3.50
101.6
4.00
114.3
4.50
114.3
4.50
127.0
5.00
127.0
5.00
168.3
6.63
177.8
7.00
219.1
8.63
219.1
8.63
273.0
10.75
273.0
10.75
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
+10 / -70
+0.39/-2.76
12.2
69.7
12.5
71.4
5.2
29.7
15.2
86.8
22.1
126.2
22.1
126.2
28.5
162.7
40.2
229.5
49.5
282.7
49.5
282.7
59.4
339.2
59.4
339.2
4.8
10.6
6.0
13.2
7.3
16.1
7.8
17.2
10.3
22.7
10.3
22.7
14.6
32.2
16.3
35.9
22.3
49.2
22.3
49.2
30.6
67.5
30.6
67.5
200
8
250
10
219.1
8.625
273.0
10.750
16.0
230
16.0
230
525
20.67
525
20.67
323.9
12.75
-
+10 / -70
+0.39/-2.76
-
117.3
669.8
-
44.4
97.9
-
130
www.grinnell.com
Pipe Ends
U
>Lii-/xn
Internal Sleeves
U->iii-{7 {
Valves &
Accessories
B OD
Part
Number
ALG0034
ALG0042
ALG0048
ALG0060
ALG0073
ALG0076
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
25
33.7
1
1.315
32
42.4
1.660
1 1 4
40
48.3
1.900
1 1 2
50
60.3
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
Max. Wk
Pressure
Bar
psi
A
mm
Inches
B
mm
Inches
Rated
Movement
L mm
Inches
Spring
Rate
N/mm
Lbs/In.
Approx.
Weight
Kg.
Lbs.
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
200
7.87
205
8.07
234
9.21
276
10.87
261
10.28
261
10.28
39
1.54
46
1.81
58
2.28
69
2.72
87
3.43
87
3.43
+20 / -20
+0.79/-0.79
+20 / -20
+0.79/-0.79
+25 / -25
+0.98/-0.98
+30 / -30
+1.18/-1.18
+30 / -30
+1.18/-1.18
+30 / -30
+1.18/-1.18
14
80
16
91
26
148
22
126
24
137
24
137
0.4
0.9
0.5
1.2
0.8
1.7
1.3
2.8
1.6
3.4
1.6
3.4
131
MATERIAL
SPECIFICATIONS
Bellow
A
U->iii-
Ws No 1.4541
Pipe Ends
B OD
U
>Lii-/xn
Pipe Size
Max. Wk
Rated
Spring
Approx.
A
B
Pressure
Movement
Rate
Weight
Nominal
O.D.
mm
mm
Bar
L mm
N/mm
Kg.
mm
mm
Inches
Inches
psi
Inches
Lbs/In
Lbs.
Inches
Inches
88.9
16.0
205
104
+20 / -20
46
1.9
80
ANS0089
3
3.500
230
8.07
4.09
+0.79/-0.79
263
4.1
100
114.3
16.0
200
127
+20 / -20
49
2.4
ANS0114
4
4.500
230
7.87
5.00
+0.79/-0.79
280
5.3
16.0
125
139.7
210
155
+25 / -25
93
3.2
ANS0139
230
139,7mm
5.500
8.27
6.10
+0.98/-0.98
531
7.1
16.0
125
141.3
210
155
+25 / -25
93
3.2
ANS0141
230
5
5.563
8.27
6.10
+0.98/-0.98
531
7.1
16.0
150
165.1
245
184
+25 / -25
83
5.0
ANS0165
230
165,1mm
6.500
9.65
7.24
+0.98/-0.98
474
11.0
16.0
150
168.3
245
184
+25 / -25
83
5.0
ANS0168
230
6
6.625
9.65
7.24
+0.98/-0.98
474
11.0
16.0
200
219.1
275
235
+25 / -25
89
8.7
ANS0219
230
8
8.625
10.83
9.25
+0.98/-0.98
508
19.1
Note: recommended for mounting with GRINNELL Rigid couplings
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
Part
Number
Valves &
Accessories
MATERIAL SPECIFICATIONS
Bellow
U
* i
Coupling
U>>i`V>Lii-/xn
A
Pipe Size
Part
Number
FTU020E
FTU025E
FTU032E
FTU040E
Nominal
mm
Inches
O.D.
mm
Inches
Max. Wk
Pressure
Bar
psi
20
3
4
25
1
32
1 1 4
40
1 1 2
26.9
1.050
33.7
1.315
42.4
1.660
48.3
1.900
10.0
150
10.0
150
10.0
150
10.0
150
A
mm
Inches
Axial
Movement
L
mm
Inches
Lateral
Movement
mm
Inches
200
7.87
200
7.87
200
7.87
200
7.87
+6 / -22
+0.24/-0.87
+6 / -22
+0.24/-0.87
+6 / -22
+0.24/-0.87
+6 / -22
+0.24/-0.87
+22
+0.87
+22
+0.87
+22
+0.87
+22
+0.87
Max.
Deflection
45
45
45
45
Approx.
Weight
Kg.
Lbs.
2.1
4.6
2.5
5.5
3.2
7.1
3.5
7.7
132
www.grinnell.com
MATERIAL
SPECIFICATIONS
Flange
U>>i`V>Lii-/xn]
with hardened steel flange ring.
Bellow
U
*]ivVi`
A
Pipe Size
Part
Number
FSF0050E
FSF0065E
FSF0080E
FSF0100E
FSF0125E
FSF0150E
FSF0200E
FSF0250E
FSF0300E
FSF1200E
FSF1250E
FSF1300E
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
76,1mm
80
3
100
4
125
139,7mm
150
165,1mm
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
165.1
6.500
200
8
219.1
8.625
250
10
273.0
10.750
300
12
323.9
12.750
Max. Wk
Pressure
Bar
psi
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
10.0
150
16.0
230
10.0
150
16.0
230
10.0
150
16.0
230
Flange
Dimension
A
mm
Inches
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
130
5.12
PN10/16
PN10/16
PN10/16
PN10/16
PN10/16
PN10/16
PN10
PN16
PN10
PN16
PN10
PN16
Axial
Movement
L
mm
Inches
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
+20 / -30
+0.79 / -1.18
Lateral
Movement
mm
Inches
Max.
Deflection
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
+20
+0.79
35
35
35
35
35
35
35
35
35
35
35
35
Approx.
Weight
Kg.
Lbs.
3.8
8.4
4.7
10.4
5.1
11.2
7.0
15.4
8.9
19.6
10.6
23.4
15.2
33.5
15.2
33.5
31.5
69.4
31.5
69.4
98.6
217.4
98.6
217.4
Valves &
Accessories
kg
DN250
DN300
10000
7500
5000
DN200
DN150
2500
DN125
DN100
DN80
1000
750
500
DN65
250
DN50
100
2
4 5 6
10
16
20 25
bar
133
Valves &
Accessories
Construction
MATERIAL SPECIFICATIONS
The hoses are annularly corrugated formed from butt weld rigid
tube. Depending on the application, required working pressure
and conditions of operation, a single or double layer of wire braid
is applied externally to the hose to restrain it, increasing its ability
to withstand the pressure, increasing hoop strength and protection
from abrasion. The extent of braiding, gauge and angle of lay is
calculated carefully to maximize performance.
Hose *
DOUBLE BRAIDED
UFBX2
SINGLE BRAID
UFBX1
UNBRAIDED
UFBX0
UiV->i-ii -{{*>
->-
Braiding *
UiV->i-ii -xx{
->-{
Temperature Range
U1>Livc
c
(-328F to 1,112F)
Hose Length
Uii3.28 feet)
* Other materials available on request
Part
Number
UFBX1-034
UFBX1-042
UFBX1-048
UFBX1-060
UFBX1-076
UFBX1-089
134
ISO 10380
Nominal
DN
Pressure
PN
25
32
40
50
65
80
Hose
Type
UFBX0
50
UFBX1
63
UFBX2
2.5
UFBX0
25
UFBX1
50
UFBX2
0.5
UFBX0
25
UFBX1
50
UFBX2
0.5
UFBX0
25
UFBX1
40
UFBX2
0.5
UFBX0
25
UFBX1
40
UFBX2
0.5
UFBX0
20
UFBX1
40
UFBX2
Max.
OD
mm
In.
33.7
1.33
35.8
1.41
37.9
1.49
41.4
1.63
43.2
1.70
45.3
1.78
47.9
1.89
50
1.97
52.2
2.06
62.1
2.44
64.2
2.53
66.3
2.61
76.5
3.01
78.6
3.09
80.7
3.18
89.8
3.54
91.9
3.62
94.1
3.70
Bend Radius
Static
Flexing
mm
mm
In.
In.
44
200
1.73
7.87
85
200
3.35
7.87
85
200
3.35
7.87
55
250
2.17
9.84
105
250
4.13
9.84
105
250
4.13
9.84
70
250
2.76
9.84
127
250
5.00
9.84
127
250
5.00
9.84
90
350
3.54
13.78
160
350
6.30
13.78
160
350
6.30
13.78
110
410
4.33
16.14
200
410
7.87
16.14
200
410
7.87
16.14
130
450
5.12
17.72
230
450
9.06
17.72
230
450
9.06
17.72
Maximum Pressure
Working
Test
Burst
Bar
Bar
Bar
psi
psi
psi
4.1
6.2
16.4
59.5
89.9
237.9
50.0
75.0
200.0
725.2
1,087.8
2,900.8
76.0
114.0
304.0
1,102.3
1,653.4
4,409.1
3.4
5.1
13.6
49.3
74.0
197.3
39.0
59.0
156.0
565.6
855.7
2,262.6
57.0
85.0
228.0
826.7
1,232.8
3,306.9
2.4
3.6
9.6
34.8
52.2
139.2
35.0
53.0
140.0
507.6
768.7
2,030.5
55.0
82.0
220.0
797.7
1,189.3
3,190.8
1.0
1.5
4.0
14.5
21.8
58.0
30.0
45.0
120.0
435.1
652.7
1,740.5
44.0
66.0
176.0
638.2
957.2
2,552.7
1.0
1.5
4.0
14.5
21.8
58.0
26.0
39.0
104.0
377.1
565.6
1,508.4
46.0
69.0
184.0
667.2
1,000.8
2,668.7
1.0
1.5
4.0
14.5
21.8
58.0
22.0
33.0
88.0
319.1
478.6
1,276.3
40.0
60.0
160.0
580.2
870.2
2,320.6
Approx.
Weight
Kg/M
Lbs./Ft.
0.3
0.2
0.7
0.5
1.1
0.7
0.4
0.3
0.9
0.6
1.3
0.9
0.7
0.5
1.2
0.8
1.7
1.1
0.8
0.6
1.5
1.0
2.3
1.5
1.9
1.3
2.8
1.9
3.7
2.5
2.3
1.5
3.4
2.3
4.5
3.0
www.grinnell.com
Part
Number
UFBX1-114
UFBX1-139
UFBX1-168
UFBX1-219
UFBX1-273
ISO 10380
Nominal
DN
Pressure
PN
100
125
150
200
250
>V>,
->i,iii>iv>>ViiiV>V>
Vertical Loop Vertical Travel
Offset or Lateral
Movement
M
R
R
C
Valves &
Accessories
M
Hose
Type
0.5
UFBX0
16
UFBX1
25
UFBX2
0.5
UFBX0
10
UFBX1
20
UFBX2
0.5
UFBX0
10
UFBX1
20
UFBX2
UFBX0
UFBX1
10
UFBX2
UFBX0
UFBX1
UFBX2
M
Max.
OD
mm
In.
126
4.96
129
5.08
132
5.20
151
5.94
153
6.02
156
6.14
178
7.01
180
7.09
183
7.20
232
9.13
235
9.25
237
9.33
287
11.30
292
11.50
-
Bend Radius
Static
Flexing
mm
mm
In.
In.
200
560
7.87
22.05
230
560
9.06
22.05
230
560
9.06
22.05
250
710
9.84
27.95
280
710
11.02
27.95
280
710
11.02
27.95
290
815
11.42
32.09
320
815
12.60
32.09
320
815
12.60
32.09
40
1015
1.57
39.96
435
1015
17.13
39.96
435
1015
17.13
39.96
490
1220
19.29
48.03
560
1220
22.05
48.03
-
Maximum Pressure
Working
Test
Burst
Bar
Bar
Bar
psi
psi
psi
0.7
1.0
2.8
10.0
15.1
40.6
18.4
27.6
73.6
266.9
400.3
1,067.5
33.0
49.5
132.0
478.6
717.9
1,914.5
0.7
1.0
2.8
10.0
15.1
40.6
11.5
17.3
46.0
166.8
250.9
667.2
20.7
31.0
82.8
300.2
449.6
1,200.9
0.6
0.8
2.2
8.0
12.0
31.9
11.2
16.8
44.8
162.4
243.7
649.8
20.0
30.0
80.0
290.1
435.1
1,160.3
0.3
0.5
1.2
4.5
6.7
18.0
7.0
11.0
28.0
101.5
159.5
406.1
10.0
15.0
40.0
145.0
217.6
580.2
0.3
0.4
1.0
3.6
5.4
14.5
9.6
14.4
38.4
139.2
208.9
556.9
-
Approx.
Weight
Kg/M
Lbs./Ft.
2.8
1.9
4.6
3.1
6.4
4.3
4.7
3.2
6.6
4.4
8.5
5.7
5.5
3.7
7.7
5.2
9.9
6.7
7.3
4.9
10.0
6.7
13.0
8.7
9.2
6.2
14.7
9.9
-
Note: The values given above are for factory braided and assembled units and are given as an aid to hose selection. For unbraided
applications or if the hose is to form an assembly used at the extreme of one or more of the characteristics below, please discuss the
application with our application engineering department.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
135
FMAX
D
D1
W
SW
2X
FAZ
Valves &
Accessories
Part Number
T < +120 C
Nominal
Size
DN
T < +220 C
In.
1501151
1502151
1501181
1502181
1501221
1502221
1501281
1502281
1501352
1502352
1501422
1502422
1501483
1502483
1501543
1502543
1501573
1502573
1501603
1502603
1501764
1502764
1501894
1502894
1501145
1502145
1501405
1502405
1501686
1502686
1501197
1502197
150738
1502738
15
18
3
8
22
1
2
28
3
4
35
1
42
1 1 4
48
1 1 2
54
57
60
2
76
2 1 2
89
3
114
4
140
5
150
6
200
8
250
10
Fmax
kN
lbs
5
1,124
5
1,124
5
1,124
5
1,124
5
1,124
5
1,124
8
1,798
8
1,798
8
1,798
8
1,798
11
2,473
11
2,473
10
2,248
10
2,248
30
6,744
30
6,744
30
6,744
H
mm
In.
72
2.83
72
2.83
72
2.83
72
2.83
85
3.35
85
3.35
100
3.94
100
3.94
100
3.94
100
3.94
115
4.53
115
4.53
158
6.22
158
6.22
310
12.20
330
12.99
370
14.57
Dimensions - mm In.
W
L
B
mm
mm
mm
In.
In.
In.
140
120
115
5.51
4.72
4.53
140
120
115
5.51
4.72
4.53
140
120
115
5.51
4.72
4.53
140
120
115
5.51
4.72
4.53
140
140
135
5.51
5.51
5.31
140
140
135
5.51
5.51
5.31
160
175
170
6.30
6.89
6.69
160
175
170
6.30
6.89
6.69
160
175
170
6.30
6.89
6.69
160
175
170
6.30
6.89
6.69
180
205
190
7.09
8.07
7.48
180
205
190
7.09
8.07
7.48
200
280
260
7.87
11.02
10.24
200
280
260
7.87
11.02
10.24
200
355
7.87
13.98
200
404
7.87
15.91
200
487
7.87
19.17
-
D1
mm
In.
74
2.91
74
2.91
74
2.91
74
2.91
92
3.62
92
3.62
125
4.92
125
4.92
125
4.92
125
4.92
150
5.91
150
5.91
205
8.07
205
8.07
275
10.83
324
12.76
407
16.02
Type
(2 Required)
FAZ II 12/10
FAZ II 12/10
FAZ II 12/10
FAZ II 12/10
FAZ II 12/10
FAZ II 12/10
FAZ II 16/25
FAZ II 16/25
FAZ II 16/25
FAZ II 16/25
FAZ II 16/25
FAZ II 16/25
FAZ II 16/25
FAZ II 16/25
FAZ II 20/60
FAZ II 20/60
FAZ II 20/60
SW
mm
In.
T
Nm
Lbf/Ft
5
0.20
5
0.20
5
0.20
5
0.20
5
0.20
5
0.20
6
0.24
6
0.24
6
0.24
6
0.24
6
0.24
6
0.24
8
0.31
8
0.31
-
15
1.03
15
1.03
15
1.03
15
1.03
15
1.03
15
1.03
30
2.06
30
2.06
30
2.06
30
2.06
30
2.06
30
2.06
60
4.11
60
4.11
-
136
www.grinnell.com
Advantages/benefits
U"i`i>Viiv>`
distribution for high loads and small edge distances
and axial spacings with filigree building components
as well as secure expansion even in cracked concrete.
U>>vi`]Vi>vii>i
necessary to apply the torque.
L
T
Hexagon Nut
and Washer
Part Number
Type
Thread
Size
1761201
FAZ II 12/10
M12
1761602
FAZ II 16/25
M16
1772003
FAZ II 20/60
M20
Valves &
Accessories
Expansion
Sleeve
Cone Bolt
Anchor
Length
L
mm
In.
Max. Fixture
Thickness
T
mm
In.
Drill Hole
Diameter
mm
In.
Effective
Anchor Depth
H
mm
In.
Approx.
Weight
Kg.
Lbs.
110
4.33
148
5.83
202
7.95
10
0.39
25
0.98
60
2.36
12
0.47
16
0.63
20
0.79
70
2.76
85
3.35
100
3.94
0.096
0.212
0.223
0.491
0.421
0.928
137
Valves &
Accessories
Figure 407T
Dielectric Waterway
Figure 407GT
Dielectric Waterway
E to E
E to E
Figure 407GT
Grooved x Male Thread
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
15
1
2
20
3
4
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
80
3
100
4
21.3
0.840
26.9
1.050
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
Part
Number
407GT00422
407GT00482
407GT00602
407GT00732
407GT00892
407GT01142
Figure 407T
Male Thread x Male Thread
End to End
mm
Inches
Approx.
Weight
kg
Lbs.
101.6
4.0
101.6
4.0
101.6
4.0
101.6
4.0
152.4
6.0
152.4
6.0
152.4
6.0
0.1
0.3
0.3
0.6
0.4
0.8
0.5
1.0
0.7
1.6
0.9
2.0
2.0
4.5
Part
Number
407T000212
407T000262
407T000342
407T000422
407T000482
407T000602
407T000732
407T000892
407T001142
End to End
mm
Inches
Approx.
Weight
kg
Lbs.
76.2
3.0
76.2
3.0
101.6
4.0
101.6
4.0
101.6
4.0
101.6
4.0
152.4
6.0
152.4
6.0
152.4
6.0
0.1
0.2
0.1
0.2
0.1
0.3
0.3
0.6
0.4
0.8
0.5
1.0
0.7
1.6
0.9
2.0
2.0
4.5
138
www.grinnell.com
STAINLESS
STEEL SYSTEMS
139
Figure 401
Stainless Steel 45 Elbows
Page 149
Figure SS-7X
Stainless Steel
Rigid Couplings
(Large Diameter)
Page 143
Figure 419
Stainless Steel Tees
Page 150
Figure 405
Stainless Steel
Flexible Couplings
Page 144
Stainless
Steel
SS-8X
Stainless Steel Heavy Duty
Flexible Coupling
Page 145
SS-1200
Stainless Steel High Pressure
Flexible Couplings
Page 146
Figure 705R
Rilsan Coated
Flexible Coupling
Page 147
SS-28
Stainless Steel
Hinged Lever Coupling
Page 148
Figure SS-41
Flange Adapters
(ANSI Class 150#)
Page 154
Figure 460
Stainless Steel End Caps
Page 151
Figure 421
Stainless Steel Reducing Tees
Page 152
Figure 450
Stainless Steel Concentric
Reducers
Page 153
Figure SJ-400
Butterfly Valve
Pages 156 - 157
Figure SJ-600L
Ball Valve
Page 158
Figure SJ-600W
Ball Valve
Page 159
Figure SJ-630
Three Port Ball Valve
Page 160
Figure SJ-726
Y Strainer
Page 161
Figure 410
Stainless Steel 90 Elbows
Page 149
Figure SS-723
Mechanical Tee
Page 162
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
140
www.grinnell.com
MATERIAL SPECIFICATIONS
Stainless Steel Housing Specifications
Gasket Specifications
U>`i
* gaskets have a Green colour
code stripe identification and conform to ASTM D
2000 for service temperatures from -34C to 110C
(-30F to 230F). They are recommended for hot
water not to exceed 110C (230F) plus a variety of
dilute acids, oil free air, and many chemical services.
They are not recommended for petroleum services.
U/i]-/{{q->`>`
specification for castings, iron-chromium,
VVi]Vi>
for general application Grade CR-8M.
U/iii}]{n >(70,000 psi)
U9i`i}]n > (30,000 psi)
U
}>x(2") minimum 30%
Bolt/Nut Specifications
U->iiiL>iiV>Vi>`L
conforming to ASTM A 193M Class 2, Type 316
Grade B8M
U
>>iii>ii>i
conforming to ASTM A 194M, Type 316, Grade 8M
U >iV>i`>>}>}>}i
Stainless
Steel
Fitting Specifications
Tech Data Sheet: G570
MATERIAL SPECIFICATIONS
U>LV>i`\{>iiiVv}
ASTM A 312, Schedule 10 and Schedule 40
Uv\{>iiiVv}
ASTM A 403 WPW or A 403 CR
U*i>Vi}i>i>v>`>`>i
steel fittings are"
nvix{
vxxn>`
4.0mm (0.16") for 250 to 300mm (10" and 12").
Fittings are fabricated from SS316Ti / 1.4571
For local country potable water approvals, contact a GRINNELL Sales Representative.
141
Pipe Size
Part
Number
Stainless
Steel
472MD00424
472MD00484
472MD00604
472MD00734
472MD00764
472MD00894
472MD01144
472MD01394
472MD01414
472MD01684
472MD02194
472MD02734
472MD03244
Nominal
mm
Inches
O.D.
mm
Inches
Max.
Pressures
Bar
psi
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
125
139,7mm
125
5
150
6
200
8
250
10
300
12
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
41.4
600
Dimensions
Max.
End Load
kN
Lbs.
Max.*
End Gap
Inches
mm
Inches
A
mm
Inches
B
mm
Inches
C
mm
Inches
Coupling Bolts
Size**
mm
Inches
Approx.
Weight
kg
Lbs.
5.78
1,298.5
7.57
1,701.1
11.82
2,658.0
17.32
3,895.0
18.86
4,241.0
25.68
5,772.5
42.44
9,542.3
63.40
14,254.6
64.87
14,583.0
92.00
20,682.4
155.92
35,054.7
242.22
54,455.9
340.73
76,603.5
1.5
0.06
2.0
0.08
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
4.8
0.19
4.8
0.19
4.8
0.19
4.8
0.19
4.8
0.19
3.3
0.13
3.3
0.13
69.9
2.75
76.2
3.00
86.6
3.41
99.3
3.91
106.4
4.19
117.6
4.63
147.6
5.81
178.3
7.02
180.1
7.09
205.5
8.09
268.2
10.56
326.1
12.84
391.4
15.41
111.3
4.38
117.3
4.62
130.0
5.12
143.0
5.63
145.3
5.72
158.8
6.25
190.5
7.50
246.9
9.72
246.6
9.71
267.5
10.53
344.4
13.56
416.8
16.41
478.5
18.84
46.0
1.81
46.0
1.81
47.8
1.88
47.8
1.88
50.8
2.00
47.8
1.88
50.0
1.97
52.3
2.06
51.8
2.04
54.1
2.13
66.5
2.62
66.5
2.62
66.5
2.62
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
M16 x 83
M16 x 83
5
8 x 3 1 4
M16 x 83
5
8 x 3 1 4
M20 x 121
3
4 x 4 3 4
1 x 6 1 2
1 x 6 1 2
0.9
2.0
1.0
2.1
0.9
1.9
1.5
3.2
1.6
3.5
1.6
3.5
2.5
5.6
3.9
8.5
3.9
8.5
4.3
9.4
8.8
19.4
14.5
32.0
19.5
43.0
Figure 472 Rigid Couplings have an Anti-Rotation Feature of gripping teeth along the coupling keys in sizes 1 1 4" - 4" (32mm - 100mm ),
making the Figure 472 perfectly suited for installations where the likelihood of rotation is greatest.
* Maximum available gap between pipe ends. Minimum gap = 0.
Maximum Pressure and End Load are total from all loads based on standard weight stainless steel pipe. Pressure ratings and end loads
may differ for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.
Max end gap is for cut grooved standard weight stainless steel pipe. Values for roll grooved pipe will be half that of cut grooved.
** Contact a GRINNELL Sales Representative for availability of inch bolt sizes vs. metric bolt sizes.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 141 for stainless steel coupling specifications and pages 234 - 245 for gasket information.
Refer to pressure ratings for Schedule 5, 10, and 40 pipe on pages 262 - 265, or contact a GRINNELL Sales Representative.
Note: The Fig. 472 Stainless Steel Heavy Duty Rigid Coupling does not provide compensation for pipe system expansion and/or
contraction associated with pipe system temperature changes.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
142
www.grinnell.com
Pressure-Temperature Rating
Nom. Rating
Working Pressure
(S40S, Roll-grooved)
Class 150
20 Bar @38C
300 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
* The working pressure shown is based on roll-grooved Sch. 10S pipe. For
other pipe schedules and cut-grooved pipe, see page 76 Performance
Data Sheet.
* Proof test pressure: 1.5 times the working pressure, non-shock cold water.
* Burst pressure is engineered minimum 2 times the working pressure.
Stainless
Steel
A
A
Pipe
O. D.
mm
Inches
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
558.8
22.000
609.6
24.000
Dimensions - mm Inches
A
318
12.52
374
14.72
397
15.63
461
18.15
514
20.24
571
22.48
622
24.49
673
26.47
406
15.98
452
17.78
500
19.69
536
21.10
587
23.11
669
26.34
720
28.35
771
30.35
65
2.56
65
2.56
75
2.95
75
2.95
75
2.95
79
3.11
79
3.11
79
3.11
Size
in
No.
2
8 x 6 1 2
8 x 6 1 2
8 x 6 1 2
8 x 3 1 2
8 x 3 1 2
4 x 4 3 4
4 x 4 3 4
4 x 4 3 4
Approx.
Weight
kg
Lbs.
10.5
23.1
11.5
23.3
15.0
33.0
19.4
42.7
25.0
55.0
33.1
72.8
33.0
72.6
34.7
76.3
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 141 for stainless steel coupling specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
143
Stainless
Steel
Pipe Size
Part
Number
Deflection
Max.
Max.
Max.*
Pressures End Load End Gap Degrees
mm/m
Bar
mm
kN
per
psi
Inches coupling In/Ft
Lbs.
Nominal
mm
Inches
O.D.
mm
Inches
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76,1mm
80
3
100
4
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
51.7
750
51.7
750
51.7
750
34.5
500
34.5
500
34.5
500
34.5
500
22.4
325
4.53
1,018.6
7.22
1,623.1
9.46
2,126.4
9.85
2,215.0
14.44
3,245.8
15.72
3,534.2
21.40
4,810.4
22.99
5,168.7
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
3.3
0.13
6.4
0.25
125
139,7mm
125
405MD01414
5
139.7
5.500
141.3
5.563
13.8
200
13.8
200
21.13
4,751.5
21.62
4,861.0
6.4
0.25
6.4
0.25
168.3
6.625
219.1
8.625
13.8
200
13.8
200
30.67
6,894.1
51.97
11,684.9
6.4
0.25
6.4
0.25
405MD00344
405MD00424
405MD00484
405MD00604
405MD00734
405MD00764
405MD00894
405MD01144
405MD01394
405MD01684
405MD02194
150
6
200
8
5 26'
4 19'
3 46'
3 1'
2 29'
2 23'
2 3'
3 11'
2 36'
2 35'
2 10'
1 40'
Dimensions
Coupling Approx.
Bolts Size** Weight
C
kg
(Qty. 2)mm
mm
Lbs.
Inches
Inches
A
mm
Inches
B
mm
Inches
95.1
0.90
75.0
0.90
65.8
0.79
52.5
0.63
43.3
0.52
41.7
0.50
35.8
0.43
55.8
0.67
56.0
2.20
65.0
2.56
69.9
2.75
82.6
3.25
93.7
3.69
101.6
4.00
111.3
4.38
144.5
5.69
97.0
3.82
106.4
4.19
112.8
4.44
124.0
4.88
139.7
5.50
146.10
5.75
165.1
6.50
196.9
7.75
46.0
1.81
46.0
1.81
46.0
1.81
47.8
1.88
47.8
1.88
47.8
1.88
47.8
1.88
52.3
2.06
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M10 x 57
3
8 x 2 1 4
M12 x 89
M12 x 89
1
2 x 3
M12 x 89
1
2 x 3
0.6
1.5
0.7
1.5
0.7
1.6
0.8
1.7
0.9
2.0
1.4
3.1
1.4
3.1
1.8
4.0
45.5
0.55
45.0
0.54
173.0
6.81
174.8
6.88
247.7
9.75
247.7
9.75
52.3
2.06
52.3
2.06
M16 x 83
M16 x 83
5
8 x 3 1 4
3.3
7.2
3.2
7.1
37.5
0.45
29.2
0.35
201.7
7.94
258.8
10.19
271.5
10.69
344.4
13.56
52.3
2.06
63.5
2.50
M16 x 83
5
8 x 3 1 4
M20 x 121
3
4 x 4 3 4
3.2
7.1
6.6
14.5
Values for roll grooved pipe will be half that of cut grooved.
* Maximum available gap between pipe ends. Minimum gap = 0.
Maximum Pressure and end load are total from all loads based on standard weight stainless steel pipe. Pressure ratings and end loads
may differ for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.
Max End Gap and Deflection is for cut grooved standard weight stainless steel pipe.
** Contact a GRINNELL Sales Representative for availability of inch bolt sizes vs. metric bolt sizes.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 141 for stainless steel coupling specifications and pages 234 - 245 for gasket information.
For fire protection equipment listing and approval pressure ratings contact Tyco FPP.
Refer to pressure ratings for Schedule 5, 10, and 40 pipe on pages 262 - 265, or contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
144
www.grinnell.com
The SS-8X is also available in CF8M (316) with 316 bolts and
nuts. contact GRINNELL for details.
* 254SMO is a registered trademark of AvestaPolarit AB.
Pressure-Temperature Rating
Size
Nom.
Rating
Working Pressure
(S40S, Cut-grooved)
Test Pressure
(Hydrostatic)
20 - 100
3
4" 4"
CWP
97 Bar @38C
1400 psi @100F
145 Bar
2100 psi
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
125 - 200
5" 8"
CWP
70 Bar @38C
1000 psi @100F
103 Bar
1500 psi
Nitrile: 180F
Nitrile: 82C
C
Stainless
Steel
Pipe
O. D.
mm
Inches
Pipe End
Separation
mm
Inches
145
Housings:
U-i`ix
-/
A890 Grade 5A
Uix
-/
Grade 4A
UiVx{-"
{
Pressure-Temperature Rating
Nom.
Rating
CWP
126 Bar
1800 psi
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
Fast-Fit Gasket:
Easy installation with a
single hand
Always use the Fast-fit gasket. Don't use a
standard gasket with the SS-1200 coupling.
O.D.
mm
Inches
26.9
1.050
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
88.9
3.500
100
4
114.3
4.500
Pipe End
Separation
mm
Inches
Dimensions - mm Inches
A
0 - 1.6
0 - 0.06
0 - 1.6
0 - 0.06
0 - 1.6
0 - 0.06
0 - 1.6
0 - 0.06
0 - 1.6
0 - 0.06
0 - 1.6
0 - 0.06
0 - 1.6
0 - 0.06
53
2.09
60
2.36
70
2.76
76
2.99
88
3.46
102
4.02
119
4.69
94
3.70
101
3.98
111
4.37
117
4.61
137
5.39
151
5.94
168
6.61
46
1.81
46
1.81
46
1.81
46
1.81
49
1.85
49
1.85
49
1.85
0 - 3.2
0 - 0.13
152
5.98
207
8.15
52
2.03
Deflection
Degree
()
Coupling
Bolt Size
(Qty 2) mm
Inches
3 - 23
8 x 2
2 - 45
8 x 2
2 - 10
8 x 2
1 - 54
8 x 2
1 - 31
2 x 3
1 - 15
2 x 3
1 - 02
2 x 3
1 - 36
8 x 3 1 2
Approx
Weight
kg
Lbs.
0.45
0.99
0.55
1.21
0.63
1.39
0.70
1.54
1.04
2.29
1.38
3.04
1.55
3.41
2.13
4.69
Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with ASME Section
VIII Division 1 pressure vessel test methods.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 141 for stainless steel coupling specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
146
www.grinnell.com
Stainless
Steel
Pipe Size
Part
Number
705MES042R
705MES048R
705MES060R
705MES076R
705MES089R
705MES114R
705MES139R
Nominal
O.D.
mm
mm
Inches
Inches
32
42.4
1 1 4
1.660
40
48.3
1.900
1 1 2
50
60.3
2
2.375
65
76.1
76,1mm 3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139.7mm 5.500
125
5
150
705MES165R
165.1mm
150
705MES168R
6
200
705MES219R
8
705MES141R
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
Max.
End
Load
kN
Lbs
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
16.0
230
Deflection
Max. End
Separation
Per
Pipe
mm
Coupling mm/m
Inches
Degrees
in/ft
2.21
3.3
75.0
4 19'
496.8
0.13
0.90
2.90
3.3
65.8
3 46'
651.9
0.13
0.79
4.53
3.3
52.5
3 01'
1,018.4
0.13
0.63
7.23
3.3
41.7
2 23'
1,625.4
0.13
0.50
9.84
3.3
35.8
2 03'
2,212.1
0.13
0.43
16.27
6.4
55.8
3 11'
3,657.6
0.25
0.67
24.31
6.4
45.0
2 36'
5,465.1
0.25
0.54
A
mm
Inches
65
2.56
70
2.76
83
3.27
102
4.02
111
4.37
145
5.71
173
6.81
16.0
230
16.0
230
16.0
230
16.0
230
24.87
5,591.0
33.95
7,632.3
35.27
7,929.0
59.78
13,439.1
175
248
6.89 9.76
197
272
7.76 10.71
202
272
7.95 10.71
259
344
10.20 13.54
Max. Wk
Pressure
Bar
Psi
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
2 35'
2 12'
2 10'
1 40'
45.0
0.54
38.3
0.46
37.5
0.45
29.2
0.35
Dimensions
B
mm
Inches
106
4.17
113
4.45
124
4.88
146
5.75
165
6.50
197
7.76
248
9.76
C
mm
Inches
46
1.81
46
1.81
48
1.89
48
1.89
48
1.89
52
2.05
52
2.05
52
2.05
52
2.05
52
2.05
64
2.52
Coupling Approx
Bolt Size Weight
(Qty 2) mm
kg
Inches
Lbs.
M10x60
M10x60
M10x60
M12x80
M12x80
M12x80
M16x90
M16x90
M16x90
M16x90
M20x120
0.7
1.5
0.7
1.5
0.8
1.8
1.4
3.1
1.4
3.1
1.8
4.0
3.3
7.3
3.2
7.1
3.2
7.1
3.2
7.1
6.6
14.6
: Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ
on pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. For fire protection equipment listing and
approval pressure ratings contact a GRINNELL Sales Representative..
: Maximum pipe end separation is for cut grooved standard weight pipe. Values for roll grooved will be 1 2 that of cut grooved. Standard
Stainless Steel 316 Bolt, Nuts and Washer.
Standard Stainless Steel 316 Bolt, Nuts and Washer.
Always use washers in combination with Fig 705R Rilsan Coated Couplings
Because of the Rilsan coating FM/UL/VDS/LPC approvals do not apply.
Also available with zinc plated bolts and nuts. Part code: 705ME...R (e.g. 705ME114R)
See page 141 for stainless steel coupling specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
147
Split Pin:
Stainless
Steel
U
>Liii`-/{
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(STD, Roll-grooved)
Class
150
20 Bar @38C
300 psi @100F
Expansion Pipe
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
A
Split
Pin
O.D.
mm
Inches
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
Max. Working
Axial
Pressure
Displacement
Bar
mm
PSI
Inches
20
300
20
300
20
300
20
300
20
300
20
300
20
300
0 1.6
0 0.06
0 1.6
0 0.06
0 1.6
0 0.06
0 1.6
0 0.06
0 1.6
0 0.06
0 3.2
0 0.13
0 3.2
0 0.13
Dimensions - mm Inches
A
75
2.95
86
3.39
92
3.62
92
3.62
119
4.69
165
6.50
189
7.44
118
4.65
121
4.76
150
5.91
150
5.91
163
6.42
205
8.07
253
9.96
47
1.85
48
1.89
48
1.89
48
1.89
48
1.89
52
2.05
52
2.05
Deflection
Degree
()
3 - 48'
3 - 31'
2 - 30'
2 - 24'
2 - 24'
3 - 12'
2 - 37'
Split
Pin
Approx.
Weight
kg
Lbs.
1.0
2.2
1.1
2.4
1.4
3.1
1.4
3.1
1.8
4.0
2.7
5.9
4.9
10.8
125
141.3
20
0 3.2
189
253
52
4.9
2 - 36'
5
5.563
300
0 0.13
7.44
9.96
2.05
10.8
150
165.1
20
0 3.2
213
278
52
5.8
2 - 14'
165.1mm
6.500
300
0 0.13
8.39
10.94
2.05
12.8
150
168.3
20
0 3.2
216
281
52
5.8
2 - 10'
6
6.625
300
0 0.13
8.50
11.06
2.05
12.8
*Deflection or angular movement is the maximum value that a coupling allows under no internal pressure.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 141 for stainless steel coupling specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
148
www.grinnell.com
MATERIAL SPECIFICATIONS
Fitting Body:
U/i{->iii-/x
n
A743 Gr. CF8
U/i-/{
n
U/i-/{
U/i/-/{
Uix-/n{
U-iix-/nx
Stainless
Steel
Uix{-"-/x
V
A
Pressure-Temperature Rating
Nom. Rating
Working Pressure
(S40S, Roll-grooved)
Class 150
20 Bar @38C
300 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
D E
U /i}iiL>i`}i`-V{-
pipe. Apply 110% for cut-grooved Sch. 40S pipe. Apply 80% for
roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe.
U *viii\xii}ii]VV`
water.
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
200
8
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
Max.
Working
Pressure
Bar
psi
20
300
20
300
20
300
20
300
20
300
20
300
Dimensions
Sealing Surface
Max. End
Load
kN
Lbs.
A
mm
Inches
B
mm
Inches
C
mm
Inches
D
mm
Inches
E
mm
Inches
5.71
1330
8.37
1950
12.41
2880
20.51
4770
44.47
10340
75.37
17520
152
6.00
178
7.00
190
7.50
229
9.00
279
11.00
343
13.50
121
4.75
140
5.50
152
6.00
191
7.50
241
9.50
298
11.75
21
0.83
22
0.87
24
0.94
24
0.94
25
1.00
28
1.12
60
2.36
73
2.87
89
3.50
114
4.50
168
6.62
219
8.62
87
3.42
102
4.00
116
4.56
141
5.56
198
7.79
254
10.00
Bolts
Size.
in
No.
8 x 3
8 x 3
8 x 3
8 x 3
4
4
4
8
3
4 x 3 1 2
4 x 3 1 2
8
8
Weight
kg
Lbs.
2.1
4.6
2.7
6.0
3.1
6.8
4.5
9.9
5.8
12.9
9.2
20.2
149
E to E
Stainless
Steel
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
32
1 1 4
40
1 1 2
50
2
65
76,1mm
80
3
100
4
125
139.7mm
150
6
200
8
250
10
300
12
42.4
1.660
48.3
1.900
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
E to E
mm
Inches
90
3.54
92
3.62
95
3.74
95
3.74
100
3.94
102
4.02
105
4.13
105
4.13
Approx.
Mating Flange Bolt
Weight
Part
kg
Number
Qty.
Size *
Lbs.
M16 x 65
1.8
4
4.0
M16 x 65
2.0
4
4.4
M16 x 65
2.7
4
6.0
M16 x 65
3.3
4
7.3
M16 x 70
4.0
8
8.8
M16 x 70
4.6
8
10.1
M16 x 75
6.0
8
13.2
M20 x 80
7.2
8
15.9
444H002194
444H002734
444H003244
E to E
mm
Inches
112.0
4.41
138.0
138.0
5.43
Approx.
Weight
kg
Lbs.
M20 x 80
10.2
22.5
18.0
39.7
22.4
49.4
8
12
12
Size *
M20 x 90
M20 x 90
* = Bolts are not supplied. Bolt lengths shown are standard; it is the responsibility of the purchaser to verify correct lengths
for intended applications
For information on alternative sizes, contact a GRINNELL Sales Representative.
Schedule 40 fittings available upon request, contact a GRINNELL Sales Representative.
See pages 44-45 for flange washer Adaptor and page 267 flange drilling specifications
See page 141 for stainless steel specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
150
www.grinnell.com
Figure 401 45
Stainless Steel Elbows
C to E
C to E
Part
Number
410H000344
410H000424
410H000484
410H000604
410H000764
410H000894
410H001144
410H001394
410H001684
410H002194
410H002734
410H003244
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
25
33.7
Stainless
Steel
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
73.0
0.5
1.315
2.87
1.1
32
1 1 4
40
1 1 2
50
2
65
76,1mm
80
3
100
4
125
139.7mm
150
6
200
8
250
10
300
12
42.4
1.660
48.3
1.900
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
83.0
3.27
92.0
3.62
111.0
4.37
130.0
5.12
149.0
5.87
187.0
7.36
225.0
8.86
263.0
10.35
345.0
13.58
421.0
16.57
437.0
17.20
0.5
1.1
0.5
1.1
0.9
2.0
1.4
3.1
2.0
4.4
3.9
8.6
6.1
13.4
8.4
18.5
16.6
36.6
27.2
60.0
30.4
67.0
Part
Number
401H000344
401H000424
401H000484
401H000604
401H000764
401H000894
401H001144
401H001394
401H001684
401H002194
401H002734
401H003244
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
25
33.7
1
1.315
32
42.4
1 1 4
1.660
40
48.3
1 1 2
1.900
50
60.3
2
2.375
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139.7mm
5.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
50.0
1.97
54.0
2.13
58.0
2.28
65.0
2.56
73.0
2.87
80.0
3.15
95.0
3.74
110.0
4.33
125.0
4.92
160.0
6.30
190.0
7.48
220.0
8.66
0.5
1.1
0.5
1.1
0.5
1.1
0.9
2.0
1.4
3.1
2.0
4.4
3.9
8.6
6.1
13.4
8.4
18.5
16.6
36.6
27.2
60.0
30.4
67.0
151
Part
Number
Stainless
Steel
419H000344
419H000424
C to E
419H000484
419H000604
C to E
419H000764
419H000894
419H001144
419H001394
419H001684
419H002194
419H002734
419H003244
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
25
33.7
1
1.315
32
42.4
1.660
1 1 4
40
48.3
1 1 2
1.900
50
60.3
2
2.375
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139.7mm
5.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
73.0
2.87
60.0
2.36
62.0
2.44
68.0
2.68
76.0
2.99
86.0
3.39
105.0
4.13
160.0
6.30
178.0
7.01
218.0
8.58
256.0
10.08
294.0
11.57
0.5
1.1
0.5
1.1
0.5
1.1
0.9
2.0
1.4
3.1
2.0
4.4
3.9
8.6
6.1
13.4
8.4
18.5
16.6
36.6
27.2
60.0
30.4
67.0
152
www.grinnell.com
Pipe Size
Part
Number
460H000344
460H000424
460H000484
460H000604
460H000764
460H000894
460H001144
460H001394
460H001684
460H002194
460H002734
460H003244
Nominal
mm
Inches
O.D.
mm
Inches
Nominal
E to E
mm
Inches
Approx.
Weight
kg
Lbs.
25
1
32
1 1 4
40
1 1 2
50
2
65
76,1mm
80
3
100
4
125
139.7mm
150 *
6
200 *
8
250 *
10
300 *
12
33.7
1.315
42.4
1.660
48.3
1.900
60.3
2.375
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
58.0
2.28
58.0
2.28
58.0
2.28
58.0
2.28
60.0
2.36
60.0
2.36
60.0
2.36
60.0
2.36
66.0
2.60
81.0
3.19
81.0
3.19
81.0
3.19
0.5
1.1
0.5
1.1
0.5
1.1
0.9
2.0
1.4
3.1
2.0
4.4
3.9
8.6
6.1
13.4
8.4
18.5
16.6
36.6
27.2
60.0
30.4
67.0
Stainless
Steel
E to E
* Dished Cap
For information on alternative sizes, contact a GRINNELL Sales Representative.
Schedule 40 fittings available upon request, contact a GRINNELL Sales
Representative.
See page 141 for stainless steel fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page
15 or contact a GRINNELL Sales Representative.
153
Pipe Size
Approx.
C to E
C to B
Weight
Nominal
O.D.
mm
mm
kg
mm
mm
Inches
Inches
Lbs.
Inches
Inches
60.3 x 60.3 x 33.7
68.0
68.0
1.0
50 x 50 x 25
421H020104
2x2x1
2.375 x 2.375 x 1.315
2.68
2.68
2.2
50 x 50 x 32
60.3 x 60.3 x 42.4
68.0
68.0
1.1
421H020124
2 x 2 x 1 1 4
2.375 x 2.375 x 1.660
2.68
2.68
2.4
50 x 50 x 40
60.3 x 60.3 x 48.3
68.0
68.0
1.1
421H020154
2.375 x 2.375 x 1.900
2.68
2.68
2.4
2 x 2 x 1 1 2
50 x 50 x 40
76.1 x 76.1 x 48.3
76.0
76.0
1.2
421H026154
76.1 x 76.1mm x 1 1 2 3.000 x 3.000 x 1.900
2.99
2.99
2.6
50 x 50 x 50
76.1 x 76.1 x 60.3
76.0
76.0
2.0
421H026204
76.1 x 76.1mm x 2
3.000 x 3.000 x 2.375
2.99
2.99
4.4
80 x 80 x 50
88.9 x 88.9 x 60.3
83.0
86.0
2.5
421H030204
3x3x2
3.500 x 3.500 x 2.375
3.27
3.39
5.5
80 x 80 x 65
88.9 x 88.9 x 76.1
83.0
86.0
2.6
421H030264
3 x 3 x 76.1mm
3.500 x 3.500 x 3.000
3.27
3.39
5.7
100 x 100 x 50
114.3 x 114.3 x 60.3
95.0
105.0
4.6
421H042204
4x4x2
4.500 x 4.500 x 2.375
3.74
4.13
10.1
100 x 100 x 65
114.3 x 114.3 x 76.1
95.0
105.0
5.1
421H042264
4 x 4 x 76.1mm
4.500 x 4.500 x 3.000
3.74
4.13
11.2
100 x 100 x 80
114.3 x 114.3 x 88.9
95.0
105.0
5.2
421H042304
4x4x3
4.500 x 4.500 x 3.500
3.74
4.13
11.5
125 x 125 x 80
139.7 x 139.7 x 88.9
108.0
124.0
6.7
421H052304
139.7 x 139.7mm x 3 5.000 x 5.000 x 3.500
4.25
4.88
14.8
125 x 125 x 100
139.7 x 139.7 x 114.3
108.0
124.0
6.7
421H052424
139.7 x 139.7mm x 3 5.000 x 5.000 x 4.500
4.25
4.88
14.8
150 x 150 x 50
168.3 x 168.3 x 88.9
122.0
143.0
11.8
421H063204
6x6x2
6.625 x 6.625 x 2.375
4.80
5.63
26.0
150 x 150 x 65
168.3 x 168.3 x 76.1
122.0
143.0
12.0
421H063264
6 x 6 x 76.1mm
6.625 x 6.625 x 3.000
4.80
5.63
26.5
150 x 150 x 80
168.3 x 168.3 x 60.3
122.0
143.0
12.1
421H063304
6x6x3
6.625 x 6.625 x 3.500
4.80
5.63
26.7
150 x 150 x 100
168.3 x 168.3 x 114.3
122.0
143.0
12.2
421H063424
6x6x4
6.625 x 6.625 x 4.500
4.80
5.63
26.9
150 x 150 x 125
168.3 x 168.3 x 139.7
122.0
143.0
12.2
421H063524
6 x 6 x 139.7
6.625 x 6.625 x 5.000
4.80
5.63
26.9
200 x 200 x 100
219.1 x 219.1 x 114.1
148.0
178.0
24.2
421H080424
8x8x4
8.625 x 8.625 x 4.500
5.83
7.01
53.4
200 x 200 x 125
219.1 x 219.1 x 139.7
148.0
178.0
24.2
421H080524
8 x 8 x 139.7
8.625 x 8.625 x 5.000
5.83
7.01
53.4
200 x 200 x 150
219.1 x 219.1 x 168.3
148.0
178.0
24.2
421H080634
8x8x6
8.625 x 8.625 x 6.625
5.83
7.01
53.4
250 x 250 x 150
273.0 x 273.0 x 168.3
194.0
216.0
30.1
421H011634
10 x 10 x 6
10.750 x 10.750 x 6.625
7.64
8.50
66.4
250 x 250 x 200
273.0 x 273.0 x 219.1
204.0
216.0
30.1
421H011804
10 x 10 x 8
10.750 x 10.750 x 8.625
8.03
8.50
66.4
300 x 300 x 200
323.9 x 323.9 x 219.1
229.0
254.0
35.6
421H013804
12 x 12 x 8
12.750 x 12.750 x 8.625
9.02
10.00
78.5
300 x 300 x 250
323.9 x 323.9 x 273.0
242.0
254.0
35.6
421H013114
12 x 12 x 10
12.750 x 12.750 x 10.750 9.53
10.00
78.5
For information on alternative sizes, contact a GRINNELL Sales Representative.
Schedule 40 fittings available upon request, contact a GRINNELL Sales Representative.
See page 141 for stainless steel fitting specifications.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact
a GRINNELL Sales Representative.
Part
Number
C to B
Stainless
Steel
154
C to E
www.grinnell.com
E to E
Part
Number
450H012104
450H015104
450H015124
450H020154
450H026154
450H026204
450H030154
450H030204
450H030264
450H042204
450H042264
450H042304
450H052304
450H052424
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
42.4 x 33.7
32 x 25
1 1 4 x 1
1.660 x 1.315
40 x 25
48.3 x 33.7
1 1 2 x 1
1.900 x 1.315
40 x 32
48.3 x 42.4
1 1 2 x 1 1 4
1.900 x 1.660
50 x 40
60.3 x 48.3
2.375 x 1.900
2 x 1 1 2
65 x 40
76.1 x 48.3
76.1mm x 1 1 2 3.000 x 1.900
65 x 50
76.1 x 60.3
76.1mm x 2
3.000 x 2.375
80 x 40
88.9 x 48.3
3 x 1 1 2
3.500 x 1.900
80 x 50
88.9 x 60.3
3x2
3.500 x 2.375
80 x 65
88.9 x 76.1
3 x 76.1mm
3.500 x 3.000
100 x 50
114.3 x 60.3
4x2
4.500 x 2.375
100 x 65
114.3 x 76.1
4 x 76.1mm
4.500 x 3.000
100 x 80
114.3 x 88.9
4x3
4.500 x 3.500
125 x 80
139.7 x 88.9
139.7mm x 3 5.500 x 3.500
125 x 100
139.7 x 114.3
139.7mm x 4 5.500 x 4.500
E to E
mm
Inches
120.0
4.72
134.0
5.28
99.0
3.90
111.0
4.37
125.0
4.92
125.0
4.92
125.0
4.92
125.0
4.92
125.0
4.92
135.0
5.31
135.0
5.31
135.0
5.31
162.0
6.38
162.0
6.38
Approx.
Weight
kg
Lbs.
0.5
1.1
0.5
1.1
0.5
1.1
1.0
2.2
1.0
2.2
1.1
2.4
1.1
2.4
1.1
2.4
1.1
2.4
1.1
2.4
1.3
2.9
1.3
2.9
1.3
2.9
1.6
3.5
Pipe Size
Approx.
E to E
Weight
Nominal
O.D.
mm
kg
mm
mm
Inches
Lbs.
Inches
Inches
168.3 x 114.3
175.0
1.6
150 x 100
450H063424
6x4
6.625 x 4.500
6.89
3.5
150 x 125
168.3 x 139.7
210.0
1.7
450H063524
6 x 139.7mm 6.625 x 5.500
8.27
3.7
200 x 100
219.1 x 114.3
227.0
1.7
450H080424
8x4
8.625 x 4.500
8.94
3.7
200 x 125
219.1 x 139.7
227.0
2.5
450H080524
8 x 139.7mm 8.625 x 5.500
8.94
5.5
200 x 150
219.1 x 168.3
227.0
2.5
450H080634
8x6
8.625 x 6.625
8.94
5.5
250 x 150
273.0 x 168.3
278.0
2.5
450H011634
10 x 6
10.750 x 6.625 10.94
5.5
250 x 200
273.0 x 219.1
278.0
3.4
450H011804
10 x 8
10.750 x 8.625 10.94
7.5
300 x 200
323.9 x 219.1
300.0
4.7
450H013804
12 x 8
12.750 x 8.625 11.81
10.4
300 x 250
323.9 x 273.0
300.0
5.2
450H013114
12 x 10
12.750 x 10.750 11.81
11.5
For information on alternative sizes, contact a GRINNELL Sales
Representative.
Schedule 40 fittings available upon request, contact a GRINNELL
Sales Representative.
See page 141 for stainless steel fitting specifications.
For instructions on part numbers, ordering information, and
availability, refer to page 15 or contact a GRINNELL Sales
Representative.
Part
Number
Stainless
Steel
155
SJ-400-L
50 - 300mm (2" - 12")
Working Pressure
(S40S, Roll-grooved)
Class
150
20 Bar @38C
300 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
U /i}iiL>i`}i`-V{-
pipe. Apply 110% for cut-grooved Sch. 40S pipe. Apply 80%
for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch.
5S pipe.
U -i>i\i}ii
U -ii\xii}ii
Stainless
Steel
SJ-400-W
350 - 600mm (14" - 24")
MATERIAL SPECIFICATIONS
Valve Body:
U
n/i>iii-/
743, A 351, or A 744 which is UL classified in
accordance with ANSI/NSF 61 and Annex G for
potable water use to temperature 23C (73.4F).
Stems:
U->iii/i{-/xn
Disc:
U
n/iiV>>i`
EPDM.
Disc Encapsulation:
U>`i
*: EPDM Rubber is classified
in accordance with ANSI/NSF 61 and Annex G for
potable water use to temperature 23C (73.4F)
U"i\
*/ i
O-Rings:
U
*
Gear Box:
UVi-/x]x{x
U
n/i{>iii-/{
A 351.
156
Nom.
Rating
Pipe Size
Equivalent Length on
Sch. 40 Pipe*
Nominal
O.D.
Meter
mm
mm
Feet
Inches
Inches
50
60.3
2.48
2
2.375
8.1
65
73
2.48
2.5
2.875
8.1
65
76.1
2.48
76.1mm
3.000
8.1
80
88.9
2.56
3
3.500
8.4
100
114.3
2.53
4
4.500
8.3
125
139.7
2.99
139.7mm
5.500
9.8
125
141.3
2.99
5
5.563
9.8
150
165.1
2.26
165.1mm
6.500
7.4
150
168.3
2.26
6
6.625
7.4
200
219.1
3.35
8
8.625
11.0
250
273.0
3.20
10
10.750
10.5
300
323.9
3.66
12
12.750
12.0
350
355.6
7.62
14
14.000
25.0
400
406.4
7.92
16
16.000
26.0
450
457.2
9.75
18
18.000
32.0
500
508.0
11.37
20
20.000
37.3
600
609.6
13.32
24
24.000
43.7
* At 15 feet/sec. (4.6m/s) velocity of water.
Cv Values
120
210
210
380
720
1150
1150
2250
2250
3800
5500
8250
9500
13000
16000
20000
29000
www.grinnell.com
F
D
D
O.D.
O.D.
C
B
SJ-400-L
50 - 300mm (2" - 12")
Pipe Size
Nominal
mm
Inches
50
2
65
2.5
65
76.1mm
80
3
100
4
125
139.7mm
125
5
150
165.1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
O.D.
mm
Inches
60.3
2.375
73
2.875
76.1
3.000
88.9
3.500
114.3
4.500
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
B
SJ-400-W
350 - 600mm (14" - 24")
Dimensions - mm Inches
A
81
3.19
97
3.81
97
3.81
97
3.81
116
4.56
148
5.83
148
5.83
148
5.81
148
5.81
133
5.25
159
6.25
165
6.5
178
7.01
178
7.01
203
7.99
216
8.5
254
10
64
2.5
79
3.13
79
3.13
92
3.63
118
4.63
145
5.71
145
5.71
145
5.69
145
5.69
222
8.75
276
10.87
327
12.87
365
14.37
416
16.38
470
18.5
527
20.75
629
24.76
63
2.48
68
2.69
68
2.69
76
3
89
3.5
102
4.02
102
4.02
102
4
102
4
140
5.5
170
6.69
205
8.07
224
8.82
248
9.76
283
11.14
314
12.36
368
14.49
106
4.17
110
4.33
110
4.33
126
4.96
135
5.31
168
6.61
168
6.61
184
7.24
184
7.24
208
8.19
235
9.25
260
10.25
276
10.87
302
11.89
350
13.78
383
15.08
453
17.83
E
(Gear
Operator)
153
6.02
153
6.02
153
6.02
153
6.02
153
6.02
153
6.02
153
6.02
153
6.02
153
6.02
200
7.87
200
7.87
200
7.87
242
9.53
242
9.53
242
9.53
290
11.42
290
11.42
E
(Lever)
192
7.56
192
7.56
192
7.56
192
7.56
260
10.24
260
10.24
260
10.24
260
10.24
260
10.24
260
10.24
356
14.02
356
14.02
F
mm
Inches
154
6.06
154
6.06
154
6.06
154
6.06
154
6.06
154
6.06
154
6.06
154
6.06
154
6.06
203
7.99
203
7.99
203
7.99
305
12.01
305
12.01
305
12.01
412
16.22
412
16.22
Approx.
Weight
kg
Lbs.
Stainless
Steel
2.3
5.1
3.2
7.1
3.2
7.1
3.5
7.7
5.0
11
7.1
15.7
7.1
15.7
9.2
20.3
9.2
20.3
12.2
26.9
28.3
62.4
40.0
88.2
59.0
130.1
67.0
147.7
86.0
189.6
133.0
293.2
160.0
352.7
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
157
The Shurjoint Model SJ-600L is a stainless steel, groovedend, two-piece, full port ball valve designed and tested
in conformance with MSS SP-110 and SP-72. The lever
handle is equipped with tamper resistant locking holes.
The SJ-600L is comprised of a stainless steel body and end
cap, virgin TFE seats and stainless steel trim. The valve is
supplied standard in CF8M (316).
MATERIAL SPECIFICATIONS
Body, End Cap, Stem, and Ball:
U/i>iii
Seats:
U6}/
40 - 80mm (1 12" - 3")
Seals:
U,*/
Lever Handle:
U/i{>iii
Stainless
Steel
Flow Data
100mm (4")
Nom.
Rating
W
CWP
Working Pressure
Shell Test
(S40S, Roll-grooved) (Hydrostatic)
42 Bar @38C
600 psi @100F
63 Bar
900 psi
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
L
Pipe Size
Nominal
mm
Inches
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
4
Dimensions - mm Inches
O.D.
mm
Inches
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
140
5.50
156
6.15
180
7.09
180
7.09
214
8.42
240
9.45
94
3.70
105
4.13
110
4.33
110
4.33
152
6.00
167
6.57
193
7.60
193
7.60
250
9.84
250
9.84
250
9.84
290
11.42
38
1.50
50
1.97
65
2.56
65
2.56
78
3.07
100
3.94
Cv
Value
270
500
800
800
1200
2150
Approx.
Weight
kg
Lbs.
3.0
6.6
4.0
8.8
7.0
15.4
7.0
15.4
9.4
20.7
25.0
55.0
158
www.grinnell.com
Pipe Size
Nominal
mm
Inches
50
2
65
2 1 2
65
76,1mm
80
3
100
4
Stainless
Steel
Dimensions - mm Inches
O.D.
mm
Inches
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
152
6
152
6
152
6
152
6
152
6
137
5.38
145
5.68
145
5.68
182
7.16
203
8.00
203
8
203
8
203
8
203
8
203
8
Cv
Value
500
800
800
1200
2150
Approx.
Weight
kg
Lbs.
8.10
17.82
11.10
24.42
11.10
24.42
13.50
29.70
29.0
63.80
159
MATERIAL SPECIFICATIONS
Body, End Cap & Ball:
UiV>iii-/x
n
Stem:
UiV>iii-/{/i
Stainless
Steel
Seats:
U,ivVi`*/
i>viii
Body Seal:
U*/
i>viii
O.D. d
Stem Hardware:
U/i{->i-ii
L
Lever Handle:
U
>Lii>V}
U/i{>iii
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(S40S, Roll-grooved)
CWP
41 Bar @38C
600 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
* Working pressure is based on connection with roll- or cutgrooved Sch. 40S stainless steel pipe.
* Seat test: 110% the working pressure.
* Shell test: 1.5 times the working pressure.
Pipe Size
Nominal
mm
Inches
50
2
O.D.
mm
Inches
60.3
2.375
Dimensions - mm Inches
L
167
6.55
110
4.32
228
8.96
38
1.50
83
3.25
79
3.13
Cv / Kv
Value
Approx.
Weight
kg
Lbs.
36 / 31
3.58
7.89
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
160
www.grinnell.com
MATERIAL SPECIFICATIONS
Body, End-Cap, Drain Plug and Coupling
Segments:
U/i{->iii-/x
n
A 743 Gr. CF8
U/i-/{
n
U/i-/{
U/i/-/{
Uix-/n{
U-iix-/nx
Uix{-"-/x
V
Stainless
Steel
Screen:
U->i-ii/i{-/{
U/i-/{
Factorys standard screen perforation is 3.2mm
( 18"). Other perforations are available upon
request.
Flow Data
Pipe Size
O.D.
mm
Inches
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
Max. Working
Pressure
Bar
psi
20
300
20
300
20
300
20
300
Working Pressure
(S40S, Roll-grooved)
Class
150
20 Bar @ 38C
300 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
U /i}iiL>i`}i`-V{-
pipe. Apply 110% for cut-grooved Sch. 40S pipe. Apply 80% for
roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe.
U *viii\xii}ii]VV`
water.
U iii}iii`ii}ii
Nominal
mm
Inches
65
2 1 2
80
3
100
4
150
6
Nom.
Rating
Dimensions - mm Inches
A
273
10.75
299
11.75
362
14.25
470
18.50
199
7.83
221
8.70
269
10.59
357
14.05
122
4.80
129
5.08
168
6.61
219
8.62
Drain Plug
Size
mm
Inches
15
1
2
15
1
2
25
1
25
1
Cv
Valve
92
162
284
770
Approx.
Weight
kg
Lbs.
7.6
16.7
8.6
18.9
9.6
21.1
39.0
85.8
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
161
MATERIAL SPECIFICATIONS
Housing:
Stainless
Steel
U/i{->iii-/x
n{
n
U/i-/{
n
U/i-/{
U/i/-/{
Uix-/n{
U-iix-/nx
Uix{-"-/x
V
C
A
Takeout
Nom.
Rating
Working Pressure
(S40S, Roll-grooved)
Class
150
20 Bar @ 38C
300 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
U /i}iiL>i`-V{-i
U *viii\xii}ii]VV`>i
U iii}iii`ii}ii
Pipe Size
Nominal
mm
Inches
32 x 15
1 x
32 x 20
1 x
32 x 25
1 x 1
40 x 15
1 x
40 x 20
1 x
40 x 25
1 x 1
50 x 15
2x
50 x 20
2x
Hole
Diameter
mm
Inches
30
1.18
30
1.18
30
1.18
30
1.18
30
1.18
30
1.18
30
1.18
30
1.18
Dimensions - mm Inches
T*
41
1.60
44
1.70
51
2.00
44
1.70
46
1.81
53
2.09
51
2.00
53
2.09
26
1.02
26
1.02
26
1.02
29
1.13
29
1.13
29
1.13
36
1.42
36
1.42
87
3.44
87
3.44
87
3.44
90
3.54
90
3.54
90
3.54
109
4.28
109
4.28
49
1.93
49
1.93
49
1.93
49
1.93
49
1.93
49
1.93
51
2.00
51
2.00
27
1.06
29
1.14
34
1.34
30
1.18
31
1.22
36
1.42
37
1.46
28
1.10
Bolt Size.
in
16 x 1 1 2
16 x 1 1 2
16 x 1 1 2
16 x 1 1 2
16 x 1 1 2
16 x 1 1 2
16 x 1 1 2
16 x 1 1 2
Approx.
Weight
kg
Lbs.
0.3
0.7
0.3
0.7
0.4
0.9
0.3
0.7
0.3
0.7
0.4
0.9
0.5
1.1
0.5
1.1
162
www.grinnell.com
HDPE
SYSTEMS
163
HDPE SYSTEMS
HDPE Systems Table of Contents
Figure 9095
HDPE Couplings
Pages 165 - 166
Bolt/Nut Specifications
Figure 9097
HDPE Transition Couplings
Page 167
Figure 9094
HDPE Flange Couplings
Page 168
HDPE
Systems
PE4710
PE100
PE3608
PE3408
DR 7.3
317
265
DR 9
250
200
160
DR 11
200
DR 13.5
160
130
DR 17
125
100
DR 21
100
80
DR 26
80
65
DR 32.5
63
50
Design stress: PE4710 1000 psi, PE3608 & 3408 800 psi
DR (Pipe Dimension Ratio)
Where: DR = D/t
D = pipe outside diameter, in.
t = pipe minimum wall thickness, in.
PE100
PE80
20
16
10
6.3
16
10
6.3
4
Gasket Specifications
U>`i
* gaskets have a Green colour
code stripe identification and conform to ASTM D
2000 for service temperatures from -34C to 110C
(-30F to 230F). They are recommended for hot
water not to exceed 110C (230F), plus a variety of
dilute acids, oil free air, and many chemical services.
They are not recommended for petroleum services.
U>`i / i (Colour code: Orange stripe)
Recommended for petroleum products, air with
oil vapors, vegetable and mineral oils within the
specified temperature range. Also good for water
services under 66C (150F). Temperature range:
-29C to +82C (-20F to +180F).
Do not use for HOT WATER above 66C (150F) or
HOT DRY AIR above 60C (140F).
GRINNELL recommends the use of a silicone based
lubricant for the HDPE series.
Coatings
U">}iq i>`>>`>`
U,i`q i>`>>`>`]i}>
Ui`]<V}>>i`>
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
164
www.grinnell.com
HDPE SYSTEMS
Shurjoint Figure 9095 HDPE Couplings
IPS Pipe Size
(Page 1 of 2)
IPS Sizes Shurjoint Tech Data Sheet: Q-01
The Shurjoint Figure 9095 HDPE Coupling is specially
designed for joining sections of high-density polyethylene
(HDPE) piping. The Figure 9095 features a four-bolt coupling
design with machined gripping teeth to positively secure
high-density polyethylene piping and create a leak-tight joint.
The contoured housing features an integrated ramp design
that helps avoid obstacles while relocating pipe runs. This
coupling is ideal for mining, irrigation, and tunnelling
applications.
HDPE
Systems
IPS Size
IPS Pipe Size
Part
Number
909520ES
909530ES
909540ES
909560ES
909580ES
909510ES
909512ES
909514ES
909516ES
909518ES
909521ES
Nominal
mm
Inches
50
2
80
3
100
4
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
O.D.
mm
Inches
60.3
2.375
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
Dimensions - mm Inches
A
86.0
3.39
117.0
4.61
146.0
5.75
200.0
7.87
264.0
10.39
318.0
12.52
365.0
14.37
413.0
16.26
467.0
18.39
515.0
20.28
568.0
22.36
133.0
5.24
165.0
6.50
203.0
7.99
273.0
10.75
333.0
13.11
397.0
15.63
448.0
17.64
492.0
19.37
543.0
21.38
595.0
23.43
651.0
25.63
117.0
4.61
102.0
4.02
146.0
5.75
149.0
5.87
152.0
5.98
165.0
6.50
200.0
7.87
257.0
10.12
257.0
10.12
260.0
10.24
260.0
10.24
Coupling
Bolt Size
(Qty. 4) Inches
Approx.
Weight
kg
Lbs.
2 x 2 3 8
1
2 x 2 3 4
1
2 x 3
5
8 x 3 1 2
5
8 x 3 1 2
3
4 x 4 3 4
3
4 x 4 3 4
1x6
1x6
1x6
1x6
2.6
5.7
3.6
7.9
5.2
11.4
8.2
18.0
12.5
27.5
20.0
44.0
25.5
56.1
41.2
90.6
44.2
97.2
50.5
111.1
61.8
136.0
165
HDPE SYSTEMS
Shurjoint Figure 9095 HDPE Couplings
ISO Pipe Size
(Page 2 of 2)
ISO Sizes Shurjoint Tech Data Sheet: Q-04
HDPE
Systems
ISO Size
ISO Pipe OD Size
Dimensions - mm
C
Coupling
Bolt Size
(Qty. 4) mm
Approx.
Weight
kg
115
105
M10 x 55
1.5
85
128
105
M10 x 55
1.9
97
140
105
M10 x 55
2.4
90.9
113
169
105
M12 x 75
3.3
110
111.0
139
181
112
M12 x 75
4.0
160
161.5
190
232
118
M12 x 75
5.6
Min.
mm
Max.
mm
50
50.5
72
63
63.6
75
75.7
90
180
181.7
211
253
118
M12 x 75
7.5
200
201.8
236
305
127
M16 x 90
9.4
225
226.4
261
330
127
M16 x 90
11.3
250
252.3
289
351
134
M16 x 110
12.7
280
281.7
319
406
134
M16 x 90
18.4
315
317.9
354
438
134
M20 x 120
16.7
355
357.2
412
489
256
M24 x 110
36.7
400
402.4
462
540
256
M24 x 110
45.5
450
452.7
515
595
256
M24 x 110
57.7
166
www.grinnell.com
HDPE SYSTEMS
Shurjoint Figure 9097 HDPE Transition Couplings
IPS & ISO Pipe Sizes
The Shurjoint Figure 9097 HDPE Transition Coupling provides for
an efficient transition from grooved piping systems to high-density
polyethylene (HDPE) piping. The Figure 9097 features a four-bolt
coupling design with one side of machine gripping teeth and a grooved
end creating a leak-tight joint between high-density polyethylene and
grooved piping systems.
The contoured housing features the same integrated ramp design as the
Shurjoint Figure 9095, which helps avoid obstacles while relocating
pipe runs. This coupling is ideal for mining, irrigation, and tunnelling
applications.
C
IPS Size
IPS Pipe Size
Part
Number
909720ES
909730ES
909740ES
909760ES
909780ES
909710ES
909712ES
Nominal
mm
Inches
50
2
80
3
100
4
150
6
200
8
250
10
300
12
Dimensions - mm Inches
O.D.
mm
Inches
60.3
2.375
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
86.0
3.39
114.0
4.49
146.0
5.75
203.0
8.00
267.0
10.51
321.0
12.64
375.0
14.76
152.0
5.99
181.0
7.13
216.0
8.50
286.0
11.26
346.0
13.63
432.0
17.00
495.0
19.49
79.0
3.11
79.0
3.11
95.0
3.74
95.0
3.74
108.0
4.25
127.0
5.00
127.0
5.00
Coupling
Bolt Size
(Qty. 4) Inches
Approx.
Weight
kg
Lbs.
2 x 2 3 8
1
2 x 3
1
2 x 3
5
8 x 3 1 2
5
8 x 3 1 2
3
4 x 4 3 4
3
4 x 4 3 4
2.0
4.4
2.7
5.9
3.8
8.4
5.7
12.5
9.7
21.3
16.0
35.2
19.6
43.1
HDPE
Systems
Max.
mm
Dimensions - mm
A
Coupling
Bolt Size
(Qty. 4) mm
Approx.
Weight
kg
63.0
60.3
86
146
73
M10 x 55
1.5
73.0
97
146
73
M10 x 55
1.9
75.0
90.0
88.9
114
178
73
M12 x 75
2.3
110.0
114.3
144
203
76
M12 x 75
2.8
160.0
165.1
194
254
76
M12 x 75
3.9
160.0
168.3
198
257
76
M12 x 75
3.9
200.0
219.1
256
321
84
M16 x 90
6.4
250.0
273.0
321
432
127
M20 x 120
11.9
315.0
323.9
375
495
127
M20 x 120
12.7
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 164 for HDPE coupling specifications and pages 234 - 245 for gasket information.
See pages 164, 256 for pipe wall thickness and standard dimension ratio information.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
167
HDPE SYSTEMS
Shurjoint Figure 9094 Flange Couplings
IPS (ANSI) & ISO (PN10/16) Pipe Sizes
IPS Sizes Shurjoint Tech Data Sheet: Q-03
ISO Sizes Shurjoint Tech Data Sheet: Q-06
909440ES
HDPE
Systems
909460ES
909480ES
Dimensions - mm Inches
Nominal
mm
Inches
80
3
O.D.
mm
Inches
88.9
3.500
Qty
197.0
7.75
225.0
8.86
79.0
3.10
100
4
150
6
200
8
250
10
300
12
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
229.0
9.00
279.0
11.00
343.0
13.50
406.0
16.00
483.0
19.02
260.0
10.25
311.0
12.25
375.0
14.75
533.0
21.0
610.0
24.0
79.0
3.10
95.0
3.75
87.0
3.42
108.0
4.25
108.0
4.25
Size
Inches
Qty
8 x 2 1 8
8 x 2 1 8
5
8 x 2 1 8
5
8 x 2 1 8
2
2
4
4 x 2 3 8
4 x 2 3 8
8
8
12
12
Size
Inches
Approx.
Weight
kg
Lbs.
8 x 3 1 4
4.8
10.6
8 x 3 1 4
3
4 x 3 1 2
3
4 x 3 3 4
1x6
1x6
6.8
15.0
9.8
21.5
13.1
28.8
19.5
42.9
23.4
51.5
Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger.
It is the responsibility of the purchaser to verify correct length for the intended application.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 164 for HDPE coupling specifications and pages 234 - 245 for gasket information.
See pages 164, 256 for pipe wall thickness and standard dimension ratio information.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
Dimensions - mm
HDPE
mm
Steel
mm
63
90
110
160
200
250
315
60.3
88.9
114.3
165.1
219.1
273.0
323.9
165
200
220
285
340
405
460
196.9
228
251
317
372
532
587
78.6
79
79
95
87
108
108
Qty
Size
mm
2
2
2
2
2
4
4
M16 x 54
M16 x 54
M16 x 54
M20 x 60
M20 x 60
M24 x 100
M24 x 100
Size
mm
Approx.
Weight
kg
4
8
8
8
12 (PN 16)
12
12
M16
M16
M16
M20
M20
M24
M24
4.3
4.8
6.8
9.8
13.1
19.5
28.5
Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger.
It is the responsibility of the purchaser to verify correct length for the intended application.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 164 for HDPE coupling specifications and pages 234 - 245 for gasket information.
See pages 164, 256 for pipe wall thickness and standard dimension ratio information.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
168
www.grinnell.com
EXTRA HEAVY
END PROTECTION
(EP) SYSTEMS
169
Figure 20EP
EP Tee
Page 173
Figure 10EP
90 EP Elbow
Page 172
Figure 35EP
EP Cross
Page 173
Figure 11EP
45 EP Elbow
Page 172
Figure 22EP
EP Header Tee
Page 174
Extra
Heavy
Systems
Surface Finish:
Uii >VV>i`
General Notes:
U*ii>}i`>i
7*V`>iii>}ii
the service temperature range of the gasket used in the coupling. For additional information
contact Shurjoint.
U>}ii>`i`>`i`>i>vi>>`ii>ii
and loads based on Sch. 40 steel pipe with roll grooves to ANSI/AWWA C 606 (latest
version) specifications. For information on other pipe schedules contact Shurjoint.
Uiivi`ii>}ii>LiVi>i`i
the figures shown.
U7>}\*}i>>Li`iii`>``>i`Livi>i}
disassembly and or removal of any components.
U-iiii}V>}iiVvV>]`i}>`>`>`ii
without notice and without incurring any obligations.
170
www.grinnell.com
MATERIAL SPECIFICATIONS
Housing:
UVi-/x]x{x>`
ASTM A395 Gr.65-45-15, min. tensile strength
4481 Bar (65,000 psi).
Surface Finish:
U >Vi>i
Rubber Gasket:
U>`i/ i EP gasket (Colour code: Orange
stripe) Recommended for petroleum products, air with oil
vapors, vegetable and mineral oils within the specified
temperature range. Also good for water services under
66C (150F).
Temperature range: -29C to 82C (-20F to 180F).
Do not use for HOT WATER above 66C (150F) or HOT
DRY AIR above 60C (140F)
EP Gasket
Extra
Heavy
Systems
Ui>i>i`V>L>}>iiii>VL
ASTM A449-83a (or A183 Gr. 2), minimum tensile strength
7584 Bar (110,000 psi), Zinc electroplated, with heavy-duty
hexagonal nuts to ASTM A563
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
200
8
250
10
300
12
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Max.
Working
Pressure
Bar
psi
175
2500
175
2500
175
2500
175
2500
140
2000
140
2000
88
1250
88
1250
Dimensions
Bolt / Nut
Max. End
Load
kN
Lbs.
A
mm
Inches
B
mm
Inches
C
mm
Inches
50
11070
73.2
16220
108.6
24040
179.5
39740
311.3
68910
527.6
116790
514.8
113400
724.7
159510
90
3.54
103
4.06
122
4.80
157
6.18
218
8.58
275
10.83
334
13.15
390
15.35
150
5.90
168
6.61
188
7.40
222
8.74
295
11.61
364
14.33
424
16.70
480
18.93
49
1.92
49
1.92
51
2.00
55
2.17
57
2.25
70
2.75
75
2.95
75
2.95
Size
in
No.
8 x 2 3 4
8 x 2 3 4
8 x 2 3 4
4 x 4 3 4
1 x 5 1 2
1 x 5 1 2
1 x 5 1 2
8 x 5 1 2
Bolt
Weight
Kg.
Lbs.
1.5
3.3
1.8
4.0
2.2
4.8
4.0
8.8
8.0
17.6
10.9
24.0
14.2
31.2
16.7
36.7
171
C-E
Extra
Heavy
Systems
C-E
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
83
3.25
95
3.75
108
4.25
127
5.00
165
6.50
1.0
2.2
1.7
3.8
2.7
5.9
4.4
9.7
10.4
22.9
Refer to the Shurjoint technical data sheet for complete technical information and
installation instructions. More information about Shurjoint Piping Products
can be found on page 14 in the General Data section of this book or on
www.shurjoint.com.
See page 170 for fitting specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to
page 15 or contact a GRINNELL Sales Representative.
C-E
C-E
172
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
51
2.00
57
2.25
64
2.50
76
3.00
89
3.50
0.8
1.8
1.3
2.9
1.9
4.3
3.9
8.5
7.5
16.5
Refer to the Shurjoint technical data sheet for complete technical information and
installation instructions. More information about Shurjoint Piping Products can
be found on page 14 in the General Data section of this book or on
www.shurjoint.com.
See page 170 for fitting specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to
page 15 or contact a GRINNELL Sales Representative.
www.grinnell.com
Pipe Size
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
83
3.25
95
3.75
108
4.25
127
5.00
165
6.50
1.6
3.5
3.6
7.9
7.3
16.0
10.7
23.5
12.2
27.0
C-E
C-E
Refer to the Shurjoint technical data sheet for complete technical information and
installation instructions. More information about Shurjoint Piping Products can be
found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 170 for fitting specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or
contact a GRINNELL Sales Representative.
Extra
Heavy
Systems
Pipe Size
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
83
3.25
95
3.75
108
4.25
127
5.00
165
6.50
1.8
3.9
3.0
6.6
6.4
14.2
7.2
15.8
20.9
46.0
C-E
C-E
Refer to the Shurjoint technical data sheet for complete technical information and
installation instructions. More information about Shurjoint Piping Products can be
found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 170 for fitting specifications.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or
contact a GRINNELL Sales Representative.
173
Pressure-Temperature Rating
Extra
Heavy
Systems
Nom.
Rating
Working Pressure
(STD, Roll-grooved)
Class
300
52 Bar @ 38C
750 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
C-E
C-E
C to E
mm
Inches
Approx.
Weight
Kg.
Lbs.
108
4.25
127
5.00
1.5
3.4
1.9
4.1
Refer to the Shurjoint technical data sheet for complete technical information
and installation instructions. More information about Shurjoint Piping
Products can be found on page 14 in the General Data section of this book
or on www.shurjoint.com.
See page 170 for fitting specifications.
For information on alternative sizes, contact a GRINNELL Sales
Representative.
For instructions on part numbers, ordering information, and availability, refer
to page 15 or contact a GRINNELL Sales Representative.
174
www.grinnell.com
SHOULDERED
SYSTEMS
175
SHOULDERED SYSTEMS
Shouldered Systems
Table of Contents & Specifications
Figure S35
Shouldered Flexible Coupling
Page 177
Figure SD-28
Shouldered Toggle Coupling
Page 178
Gasket
L
3
Shoulder Dimensions
( Type A Weld-on Rings )
The shouldered piping system utilizes
Type A weld-on rings, manufactured
from mild steel or material compatible
to pipe end used. Type A rings are
suitable for services up to maximum
41 Bar (600 psi) for sizes up 50 to
100mm (2" to 4") and 28 Bar (400
psi) for 125 to 200mm (5" 8")
Nominal
Size
mm
Inches
Pipe OD
D1
mm
Inches
50
2
80
3
100
4
150
6
150
6
200
8
60.3
2.375
88.9
3.500
114.3
4.500
165.1
6.500
168.3
6.625
219.1
8.625
Shoulder
L
Diameter
D23
mm
Inches
66.5
2.62
97.0
3.82
122.0
4.80
174.5
6.87
178.0
7.00
232.0
9.13
D1
Shoulder
Length
L
mm
Inches
16.0
0.63
16.0
0.63
17.5
0.69
17.5
0.69
17.5
0.69
20.6
0.81
D2
Nominal Gap
E
mm
Inches
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
176
www.grinnell.com
SHOULDERED SYSTEMS
Shurjoint Figure S35 Shouldered Flexible Coupling
Shurjoint Tech Data Sheet: T-05
MATERIAL SPECIFICATIONS
Housing:
UVi-/xx{x>`
ASTM A 395, Gr. 65-45-15, min. tensile strength
4481 Bar (65,000 psi).
Surface Finish:
U->`>`v`V}>>i`
U*>i`">}i,i`"
U
>},i`iV
(Option)
Rubber Gasket:
U>`i/ i(Colour code: Orange stripe)
Recommended for petroleum products, air with
oil vapors, vegetable and mineral oils within the
specified temperature range. Also good for water
services under 66C (150F). Temperature range:
-29C to 82C (-20F to 180F). Do not use for HOT
WATER above 66C (150F) or HOT DRY AIR above
60C (140F)
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(STD)
Class
150
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
O.D.
mm
Inches
50
2
80
3
100
4
150
6
150
6
200
8
250
10
300
12
60.3
2.375
88.9
3.500
114.3
4.500
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Working
Pressure
(CWP)*
Bar
psi
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
Dimensions - mm Inches
A
99.0
3.90
129.0
5.08
159.0
6.26
213.0
8.39
219.0
8.62
273.0
10.75
335.4
13.20
385.8
15.19
139.0
5.47
168.0
6.61
200.0
7.87
267.0
10.50
279.0
11.00
335.0
13.19
396.8
15.62
450.1
17.72
46.0
1.81
46.0
1.81
50.0
1.97
50.0
1.97
50.0
1.97
60.0
2.36
65.0
2.56
65.0
2.56
Allowable
Pipe End
Separation
mm
Inches
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
3.2
0.13
Bolt
Size
in
Approx.
Weight
kg
Lbs.
8" x 2 1 8"
1.1
2.4
1.5
3.3
2.2
4.9
3.5
7.7
3.8
8.4
5.9
13.0
9.0
19.8
10.4
22.9
Deflection
()
3
2 43'
2 " x 3"
2 " x 3"
1 53'
1 29'
5
8" x 3 1 2"
8" x 3 1 2"
4" x 4 3 4"
4" x 4 3 4"
4" x 4 3 4"
1 2'
1 1'
0 47'
0 47'
0 47'
Shouldered
Systems
177
SHOULDERED SYSTEMS
Shurjoint Figure SD-28 Shouldered Toggle Coupling
Shurjoint Tech Data Sheet: T-07
The Shurjoint Model SD-28 coupling is designed to connect
shouldered-end pipe with Type A rings for services where
frequent assembly and disassembly is desired or required.
The housing segments are hinged with a lever handle for
easy installation. The use of a split pin prevents accidental
opening of the couplings.
MATERIAL SPECIFICATIONS
Housing & Locking Lever Handle:
UVi-/xx{x>`
ASTM A 395, Gr. 65-45-15, min. tensile strength 4481
Bar (65,000 psi).
Surface Finish:
U->`>`v`i`V}>>i`
C
U" >ViiV`iV>i`
U"*>i`>}i,i`
U"
>},i`i
colours
Rubber Gasket:
A
Split Pin
Pressure-Temperature Rating
Shouldered
Systems
Nom.
Rating
Working Pressure
(STD)
Class
150
20 Bar @38C
300 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
O.D.
mm
Inches
50
2
80
3
100
4
150
6
150
6
200
8
60.3
2.375
88.9
3.500
114.3
4.500
165.1
6.500
168.3
6.625
219.1
8.625
Max. Working
Pressure
(CWP)*
Bar
psi
20
300
20
300
20
300
20
300
20
300
20
300
Toggle Links:
U*>i`V>Lii>i -
Hinge Pin:
U
>i>`ii`V>Lii -
Rivet:
U
>Lii-
Split Pin:
U
>Liii`-/{
Dimensions
A
mm
Inches
B
mm
Inches
C
mm
Inches
86.5
39.32
126
4.96
160
6.30
214
8.43
217
8.54
278
10.95
112.5
4.43
164
6.46
214
8.43
283
11.14
282
11.10
360
14.17
49
1.93
49
1.93
52
2.05
52
2.05
52
2.05
60
2.36
Allowable Pipe
End Separation
(E)
mm
Inches
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0. 125
3.2
0.125
Deflection
()
2 - 43'
1 - 53'
1 - 29'
1 - 2'
1 - 1'
0 - 47'
Approx.
Weight
kg
Lbs.
1.3
2.8
2.0
4.4
3.0
6.6
4.3
6.5
4.5
9.9
8.3
18.3
178
www.grinnell.com
G-MINE (PVC)
SYSTEMS
179
G-MINE
Systems
Figure 72907
Nipples
(Spline x Groove)
Page 186
Figure 72908
Nipples
(Spline x Male Thread)
Page 186
Figure 72909
Nipples
(Plain End x Male Thread)
Page 187
Figure 72911
Nipples
(Spline x Spline)
Page 187
Figure 72910
90 Elbows
(Spline x Spline)
Page 188
Figure 72912
45 Elbows
(Spline x Spline)
Page 188
Figure 72913
90 Sweep Elbows
(Spline x Spline)
Page 189
Figure 72914
45 Sweep Elbows
(Spline x Spline)
Page 189
Figure 72915
Caps & Plugs
(Spline)
Page 190
Figure 72916
Flange Adapters
(Spline x Flange)
Page 190
Figure 72917
Tees
(Spline x Spline x Spline)
Page 191
Figure 72918
Reducing Tees
(Spline x Spline x Spline)
Page 191
Figure B8200L
Butterfly Valves
(Spline x Spline)
Page 192
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the gasket
recommendation listing for the specific application.
180
www.grinnell.com
Pipe Specifications:
Approvals:
U
*i>`}>i -{
>
except for SDR 13.5 which is NSF-61.
Materials:
U *i>`v}>i>`iv}i}*6
*
Vinyl Chloride) conforming to ASTM D 1784.
U
*6
iiiiiiv-/
3139.
U "}>i/ivV>i`] i >`ii,LLi
(NBR) or Polyisoprene Rubber conforming to ASTM F
477.
U -i >>LiV`i>
Polyvinylidene Flouride.
U /i*6
>i>
impact strength
increases and the tensile
strength decreases as
the temperature rises.
Because of this effect,
the pressure rating of the
pipe and fittings must be
decreased to allow for
safe operation of the line
at elevated temperatures.
U ii>}v*6
i>i`iii`>
water environment of 23C (73.4F) 2C (3.6F).
As the temperature of the environment increases,
PVC Pipe becomes more ductile. This is represented
by the graph (Figure 1).
1.00
0.80
0.60
0.40
1.00
0.88
0.75
0.62
0.50
0.40
0.30
0.22
0.20
Test Method
Izod Impact
ASTM D 256
ASTM D 638
ASTM D 648
ASTM D 635
Value
16.8 N/m of Notch
1.15 Ft.-Lbs./In.
482 Bar
7.000 psi
27579 Bar
400.000 psi
70C
158F
Self-Extinguishing
SDR 21
N/m
Ft. - Lbs.
3721
255
5545
380
7223
495
SDR 17
N/m
Ft. - Lbs.
2480
170
3575
245
4670
320
6859
470
8902
610
SDR 13.5*
N/m
Ft. - Lbs.
2480
170
3575
245
4670
320
6859
470
8902
610
* High-pressure pipe
0
70 80 90 100 110 120 130 140
TEMPERATURE, F
FIGURE 1
PVC TEMPERATURE
SERVICE FACTOR
G-MINE
Systems
181
C
G1
O.D.
15
P
GROOVE DETAIL
Pipe Size
Part
Number
7290020E
7290030E
G-MINE
Systems
7290040LE
7290040E
7290040HE
7290060LE
7290060E
7290060HE
7290080LE
7290080E
7290080HE
Nominal
mm
Inches
50
2
80
3
100
4L
100
4
100
4H
150
6L
150
6
150
6H
200
8L
200
8
200
8H
O.D.
mm
Inches
60.3
2.375
88.9
3.50
114.3
4.50
114.3
4.50
114.3
4.50
168.3
6.625
168.3
6.625
168.3
6.625
219.1
8.625
219.1
8.625
219.1
8.625
SDR
SDR 17
SDR 17
SDR 21
SDR 17
SDR 13.5
SDR 21
SDR 17
SDR 13.5
SDR 21
SDR 17
SDR 13.5
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
13.8
200
17.2
250
21.7
315
13.8
200
17.2
250
21.7
315
13.8
200
17.2
250
21.7
315
P
mm
Inches
C
mm
Inches
G1
Width
mm
Inches
G2
Depth
mm
Inches
4.8
0.188
4.8
0.188
4.8
0.188
4.8
0.188
4.8
0.188
8.0
0.313
8.0
0.313
8.0
0.313
16.7
0.625
16.7
0.625
16.7
0.625
44.5
1.75
63.5
2.50
76.2
3.00
76.2
3.00
76.2
3.00
76.2
3.00
76.2
3.00
76.2
3.00
80.3
3.16
80.3
3.16
80.3
3.16
6.4
0.250
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
12.7
0.500
12.7
0.500
12.7
0.500
2.5
0.100
3.4
0.135
3.4
0.135
3.4
0.135
3.4
0.135
3.4
0.135
3.4
0.135
3.4
0.135
3.7
0.145
3.7
0.145
3.7
0.145
Min.
Wall
Thk.
mm
Inches
3.6
0.140
5.2
0.206
5.4
0.214
6.7
0.265
8.5
0.333
8.0
0.316
9.9
0.390
12.5
0.491
10.4
0.410
12.9
0.508
16.2
0.639
Approx.
Pipe
Weight
Kg/M
Lbs./Ft.
0.3
0.64
0.6
1.37
0.8
1.86
1.0
2.25
1.3
2.85
1.8
3.99
2.2
4.87
2.8
6.07
3.0
6.71
3.7
8.16
4.7
10.30
182
www.grinnell.com
Part
Number
7290420
7290430
7290440
7290440H
7290460
7290460H
7290480
7290480H
Nominal
Size
mm
Inches
B.O.D.
mm
Inches
L
mm
Inches
50
2
80
3
100
4
100
4H
150
6
150
6H
200
8
200
8H
81
3.20
111
4.375
139
5.47
151
5.96
199
7.84
213
8.37
259
10.19
278
10.95
133.4
5.25
184.2
7.25
209.6
8.25
209.6
8.25
209.6
8.25
209.6
8.25
257.3
10.125
257.3
10.125
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
21.7
315
17.2
250
21.7
315
17.2
250
21.7
315
Approx.
Weight
kg
Lbs.
0.5
1.05
1.0
2.17
2.2
4.92
2.3
5.00
2.8
6.20
4.7
10.40
5.0
10.93
9.1
20.00
L
B.O.D.
Part
Number
7290520
7290530
7290540
7290560
7290580
Nominal
Size
mm
Inches
B.O.D.
mm
Inches
Max.
Pressure
Rating
Bar
psi
L1
mm
Inches
L2
mm
Inches
Approx.
Weight
kg
Lbs.
50
2
80
3
100
4
81.3
3.20
111.1
4.375
138.9
5.47
17.2
250
17.2
250
17.2
250
139.7
5.50
203.2
8.00
228.6
9.00
60.5
2.375
88.9
3.50
101.6
4.00
0.5
1.00
1.0
2.20
1.6
3.50
150
199.1
17.2
228.6
101.6
2.9
6
200
8
7.84
258.8
10.19
250
17.2
250
9.00
257.3
10.125
4.00
114.3
4.50
6.40
5.1
11.30
G-MINE
Systems
L1
L2
B.O.D.
183
729194020
729194030
729196020
729196030
O.D.
729196040
729198020
B.O.D.
729198040
729198060
Nominal
Size
mm
Inches
O.D.
mm
Inches
B.O.D.
mm
Inches
Max.
Pressure
Rating
Bar
psi
L
mm
Inches
Approx.
Weight
kg
Lbs.
100 x 50
4x2
100 x 80
4x3
150 x 50
6x2
150 x 80
6x3
150 x 100
6x4
200 x 50
8x2
200 x 100
8x4
200 x 150
8x6
60.3
2.375
88.9
3.50
60.3
2.375
88.9
3.50
114.3
4.50
60.3
2.375
114.3
4.50
168.3
6.625
139
5.47
139
5.47
199
7.84
199
7.84
199
7.84
259
10.19
259
10.19
259
10.19
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
387.4
15.25
420.6
16.56
400.1
15.75
419.1
16.50
441.5
17.38
431.8
17.00
397.0
15.63
469.9
18.50
2.3
5.00
2.6
5.70
4.7
10.40
5.0
11.00
5.0
11.10
5.0
11.10
10.9
24.10
11.2
24.60
The GRINNELL Figure 72940 G-MINE Threaded Outlet Coupling (Female x Male
x Female NPT) provides a threaded branch outlet connection.
G-MINE
Systems
Part
Number
729402075
729402010
729403015
729404015
L1
NPT
729406015
729408020
B.O.D.
O.D.
Nominal Size
Run x Outlet
Inches x NPT
O.D.
mm
Inches
B.O.D.
mm
Inches
Max.
Pressure
Rating
Bar
psi
L
mm
Inches
Approx.
Weight
kg
Lbs.
50 x 20
60.3
81
17.2
257.3
0.7
2 x 3 4
2.375
3.20
250
10.13
1.60
50 x 25
60.3
81
17.2
257.3
0.7
2x1
2.375
3.20
250
10.13
1.50
80 x 40
88.9
111
17.2
342.9
1.6
3 x 1 1 2
3.50
4.375
250
13.50
3.60
100 x 40
114.3
139
17.2
381.0
2.6
4 x 1 1 2
4.50
5.47
250
15.00
5.80
150 x 40
168.3
199
17.2
431.8
5.2
6 x 1 1 2
6.625
7.84
250
17.00
11.50
200 x 40
219.1
259
17.2
482.6
9.3
8 x 1 1 2
8.625
10.19
250
19.00
20.60
184
www.grinnell.com
Nominal Size
Run x Outlet
Inches x NPT
B.O.D.
mm
Inches
50 x 20
2 x 3 4
50 x 25
2x1
80 x 20
3 x 3 4
80 x 25
3x1
80 x 40
3 x 1 1 2
100 x 20
4 x 3 4
100 x 25
4x1
100 x 40
4 x 1 1 2
81
3.20
81
3.20
111
4.375
111
4.375
111
4.375
139
5.47
139
5.47
139
5.47
Max. Pressure
Rating
Bar
psi
13.8
200
13.8
200
13.8
200
13.8
200
11.0
160
13.8
200
13.8
200
11.0
160
L
mm
Inches
177.8
7.00
177.8
7.00
241.3
9.50
241.3
9.50
241.3
9.50
266.7
10.50
266.7
10.50
266.7
10.50
Approx.
Weight
kg
Lbs.
0.7
1.50
0.6
1.40
1.2
2.60
1.3
2.90
1.2
2.70
1.9
4.10
1.9
4.10
1.8
4.00
150 x 20
199
13.8
285.8
3.6
6 x 3 4
7.84
200
11.25
7.90
150 x 25
199
13.8
285.8
3.6
729306010
6x1
7.84
200
11.25
7.90
150 x 40
199
13.8
285.8
3.6
729306015
6 x 1 1 2
7.84
200
11.25
7.90
200 x 25
259
13.8
317.5
6.8
729308010
8x1
10.19
200
12.50
15.00
200 x 40
259
13.8
317.5
6.8
729308015
8 x 1 1 2
10.19
200
12.50
15.00
G-MINE Gaskets (O-rings) and Splines included.
See G-MINE specifications on page 181.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page
15 or contact a GRINNELL Sales Representative.
729306075
L
NPT
B.O.D.
Part
Number
7290620
7290630
7290640
7290660
7290680
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
6
200
8
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
L
mm
Inches
Approx.
Weight
kg
Lbs.
177.8
7.00
228.6
9.00
254.0
10.00
304.8
12.00
330.2
13.00
0.3
0.60
0.6
1.40
1.0
2.30
2.4
5.20
4.4
9.70
G-MINE
Systems
L
O.D.
185
Part
Number
7290720
7290730
7290740
7290740H
7290760
7290760H
7290780
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
100
4H
150
6
150
6H
200
8
60.3
2.375
88.9
3.50
114.3
4.50
114.3
4.50
168.3
6.625
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
L
mm
Inches
Approx.
Weight
kg
Lbs.
177.8
7.00
228.6
9.00
254.0
10.00
254.0
10.00
304.8
12.00
304.8
12.00
342.9
13.50
0.3
0.60
0.7
1.60
1.1
2.50
1.4
3.10
2.4
5.20
3.3
7.20
4.1
9.00
O.D.
G-MINE
Systems
Part
Number
7290820
7290830
7290840
7290860
L
O.D.
186
7290880
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
6
200
8
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
13.8
200
13.1
190
11.0
160
9.7
140
8.3
120
L
mm
Inches
Approx.
Weight
kg
Lbs.
177.8
7.00
228.6
9.00
254.0
10.00
304.8
12.00
330.2
13.00
0.3
0.60
0.6
1.30
1.1
2.40
2.4
5.20
4.1
9.00
www.grinnell.com
Part
Number
7290920
7290930
7290940
7290960
7290980
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
60.3
2.375
88.9
3.50
114.3
4.50
168.3
Max.
Pressure
Rating
Bar
psi
13.8
200
13.1
190
11.0
160
9.7
6.625
200
8
219.1
8.625
L
mm
Inches
Approx.
Weight
kg
Lbs.
133.4
5.25
165.1
6.50
177.8
7.00
228.6
0.3
0.60
0.6
1.25
1.1
2.50
2.6
140
9.00
5.70
8.3
120
248.9
9.80
4.7
10.25
L
O.D.
Part
Number
7291140
7291160
7291180
Nominal
Size
mm
Inches
O.D.
mm
Inches
100
4
150
6
200
8
114.3
4.50
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
L
mm
Inches
Approx.
Weight
kg
Lbs.
254.0
10.00
304.8
12.00
330.2
13.00
1.0
2.30
2.4
5.20
4.4
9.70
L
O.D.
187
Part
Number
7291020
7291030
7291040
72910460
7291080
O.D.
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
6
200
8
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
L
mm
Inches
Approx.
Weight
kg
Lbs.
203.2
8.00
258.6
10.18
314.5
12.375
397.0
15.625
457.2
18.00
0.8
1.70
1.9
4.10
3.4
7.50
7.9
17.40
15.3
33.70
G-MINE
Systems
Part
Number
7291220
L
7291230
7291240
7291260
L
7291280
O.D.
188
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
6
200
8
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
L
mm
Inches
Approx.
Weight
kg
Lbs.
196.9
7.75
247.7
9.75
285.8
11.25
330.2
13.00
381.0
15.00
0.7
1.60
1.8
3.90
3.2
7.10
7.3
16.10
14.0
30.90
www.grinnell.com
Part
Number
7291320
7291330
7291340
72913240H
7291360
7291360H
7291380
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
100
4H
150
6
150
6H
200
8
60.3
2.375
88.9
3.50
114.3
4.50
114.3
4.50
168.3
6.625
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
21.7
315
17.2
250
21.7
315
17.2
250
L
mm
Inches
W
mm
Inches
Approx.
Weight
kg
Lbs.
408
16.06
587.4
23.125
408.0
30.25
768.4
30.25
1066.8
42.00
1066.8
42.00
1184.3
46.625
408
16.06
587.4
23.125
408.0
30.25
768.4
30.25
1066.8
42.00
1066.8
42.00
1184.3
46.625
1.1
2.40
2.9
6.40
5.8
12.70
6.8
14.90
14.1
31.00
20.6
45.30
26.8
59.00
90
L
O.D.
Part
Number
7291420
7291430
7291440
7291440H
7291460
7291460H
7291480
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
100
4H
150
6
150
6H
200
8
60.3
2.375
88.9
3.50
114.3
4.50
114.3
4.50
168.3
6.625
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
21.7
315
17.2
250
21.7
315
17.2
250
L
mm
Inches
W
mm
Inches
Approx.
Weight
kg
Lbs.
460.4
18.125
652.5
25.69
730.3
28.75
730.3
28.75
995.4
39.19
995.4
39.19
1320.8
52.00
190.5
7.50
273.1
10.75
301.6
11.875
301.6
11.875
412.8
16.25
412.8
16.25
547.7
21.57
0.9
2.00
2.2
4.90
3.4
7.50
5.3
11.60
8.3
18.30
11.9
26.20
15.9
35.00
G-MINE
Systems
W
45
O.D.
189
7291520
7291530
Figure 72915
End Plug (Male Spline)
L
O.D.
Figure 72915
End Cap (Female Spline)
L
B.O.D.
Nominal
Size
mm
Inches
O.D.
mm
Inches
Max. Pressure
Rating
Bar
psi
L
mm
Inches
Approx.
Weight
kg
Lbs.
50
2
80
3
60
2.375
89
3.50
17.2
250
17.2
250
190.5
7.50
254.0
10.00
0.4
0.90
0.9
2.00
G-MINE
Systems
O.D. 1
Part
Number
7291620
7291630
7291640
7291660
7291680
Nominal
Size
mm
Inches
50
2
80
3
100
4
150
6
200
8
Outlet 1
O.D.
mm
Inches
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
219.1
8.625
Max. Pressure
Rating
Bar
psi
10.3
150
10.3
150
10.3
150
10.3
150
10.3
150
O.D. 2
BOLT
SIZE
L
mm
Inches
182.6
7.19
235.0
9.25
260.4
10.25
316
12.44
339.9
13.38
Flange 2
O.D.
mm
Inches
152.4
6.00
190.5
7.50
228.6
9.00
279.4
11.00
342.9
13.50
R
mm
Inches
20.6
0.81
26.9
1.06
28.7
1.125
32.5
1.28
35.1
1.375
Bolt Circle
Diameter
mm
Inches
120.7
4.75
152.4
6.00
190.5
7.50
241.3
9.50
298.5
11.75
Bolt
Size
Bolt
Holes
Approx.
Weight
kg
Lbs.
0.7
1.6
1.5
3.2
2.3
5.0
4.1
9.0
7.3
16.0
All flanges are Van Stone style with glass-filled PVC ring.
ANSI Class 125 and 150 bolt pattern.
See G-MINE specifications on page 181.
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
190
www.grinnell.com
Part
Number
7291720
7291730
7291740
7291760
7291780
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
6
200
8
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
219.1
8.625
Max.
Pressure
Rating
Bar
psi
17.2
250
17.2
250
17.2
250
17.2
250
17.2
250
L
mm
Inches
F
mm
Inches
Approx.
Weight
kg
Lbs.
419.1
16.50
546.1
21.50
628.7
24.75
787.4
31.00
920.8
36.25
276.4
10.875
280.0
11.25
314.5
12.375
393.7
15.50
450.9
17.75
1.0
2.30
2.6
5.80
4.9
10.70
11.3
25.00
21.8
48.00
O.D.
O.D.
L
Part
Number
729183020
729184020
729184030
729186020
729186030
729186040
729188060
Nominal Size
Run x Run
x Branch
mm
Inches
80 x 50
3x2
100 x 50
4x2
100 x 80
4x3
150 x 50
6x2
150 x 80
6x3
150 x 100
6x4
200 x 150
8x6
Run
O.D. 1
mm
Inches
Outlet
O.D. 2
mm
Inches
88.9
3.50
114.3
4.50
114.3
4.50
168.3
6.625
168.3
6.625
168.3
6.625
219.1
8.625
60.3
2.375
60.3
2.375
88.9
3.50
60.3
2.375
88.9
3.50
114.3
4.50
168.3
6.625
Max.
Approx.
Pressure
L
F
Weight
Rating
mm
mm
kg
Bar
Inches Inches
Lbs.
psi
17.2
533.4 224.5
2.3
250
21.00
8.84
5.00
17.2
581.2 240.5
4.6
250
22.875 9.47
10.10
17.2
614.4 296.2
4.9
250
24.19 11.66 10.80
17.2
714.5 298.5
10.4
250
28.125 11.75 22.83
17.2
714.5 323.9
11.0
250
28.125 12.75 24.20
17.2
741.4 349.3
11.1
250
29.19 13.75 24.40
17.2
850.9 427.0
23.1
250
33.50 16.81 50.90
O.D.2
F
O.D.1
L
191
MATERIAL SPECIFICATIONS
Maximum Working Pressure
U22.1 Bar (320 psi)
Body
UDuctile iron conforming to ASTM A 536,
Grade 65-45-12
Body Coating
UBlack epoxy-coated
Disc
A
HANDLE
Disc Seal
STEM
SEALS
STEM
Stem
DISC
Stem Seal
O.D.
G-MINE
Systems
DISC
SEAL
Handle
UZinc-plated carbon steel
T/O
BODY
B820020
B820030
B820040
B820060
B820080
ANSI
mm
Inches
50
2
80
3
100
4
150
6
200
8
O.D.
mm
Inches
60.3
2.375
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
Dimensions - mm Inches
A
T/O
202.0
7.95
202.0
7.95
202.0
7.95
261.0
10.28
315.0
12.40
131.0
5.16
146.0
5.75
179.0
7.05
213.1
8.39
238.0
9.37
191.1
7.50
233.2
9.18
258.6
10.18
264.6
10.41
278.5
10.96
61.0
2.40
55.1
2.17
52.8
2.08
58.7
2.31
50.8
2.00
Approx.
Weight
kg
Lbs.
4.0
8.8
8.0
17.6
12.0
26.4
23.0
50.6
34.0
74.9
192
www.grinnell.com
Part
Number
7299920
7299930
7299940
7299940H
7299960
7299960H
7299980
Nominal Size
mm
Inches
L
mm
Inches
50
2
80
3
100
4
100
4H
266.7
10.50
406.4
16.00
457.2
18.00
457.2
18.00
Cross Section
Diameter C.S.
mm
Inches
4.8
0.19
6.4
0.25
6.4
0.25
6.4
0.25
150
6
150
6H
200
8
609.6
24.00
609.6
24.00
812.8
32.00
6.4
0.25
6.4
0.25
8.0
0.31
C.S.
DIA.
Configuration
ROUND
ROUND
INSERTION END
ROUND
SQUARE
ROUND
SQUARE
SQUARE
Part
Number
ITGM 36
ITGM 8
G-MINE
Systems
Nominal Size
mm
Inches
80 - 150
3-6
200
8
PLUNGER
HANDLE
SPLINE
(NOT INCLUDED
WITH TOOL)
FLANGE BARREL
POINTED
INSERTION END
OF SPLINE
LOAD SPLINE
INTO BARREL
193
O.D.
C.S.
DIA.
Part
Number
Nominal
Size
mm
Inches
O.D.
mm
Inches
50
2
80
3
100
4
150
6
200
8
70.4
2.770
98.9
3.895
124.3
4.895
182.3
7.176
237.5
9.350
7289920
7289930
7289940
7289960
7289980
Cross
Section
Diameter C.S.
mm
Inches
5.3
0.210
5.3
0.210
5.3
0.210
7.0
0.275
9.5
0.375
Material
Teflon*-Coated
G-MINE
Systems
194
www.grinnell.com
PLAIN END
SYSTEMS
195
Figure 909
Plain End Couplings
Page 198
Figure 960
Plain End Caps
Page 202
Figure 924
Plain End True Wyes
Page 202
Figure 910
Plain End 90 Elbows
Page 199
Figure 921
Plain End Reducing Tees
Page 203
Figure 901
Plain End 45 Elbows
Page 199
Figure 914
Plain End Laterals
Page 203
Figure 910LR
Plain End Long Radius
90 Elbows
Page 200
Figure 901LR
Plain End Long Radius
45 Elbows
Page 200
Plain End
Systems
Figure 919
Plain End Tees
Page 201
Figure 927
Plain End Crosses
Page 201
Figure 999
Plain End Swaged Nipples
Page 204
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
196
www.grinnell.com
Gasket
Housing
Segment
Bolt / Nut
Coupling Specifications
MATERIAL SPECIFICATIONS
U-/xq->`>`iVvV>v`Vi
castings, Grade 65-45-12
U/iii}]{{n > (65,000 psi)
U9i`i}] >(45,000 psi)
U
}>x (2"), minimum 12%
U->iiiL>`>i>>>Li
request.
U-/xq->`>`iVvV>v`i`
galvanizing
Coatings
Gasket Specifications
U>`i
* gaskets have a Green colour
code stripe identification and conform to ASTM D
2000 for service temperatures from -34C to 110C
(-30F to 230F). They are recommended for hot
water not to exceed 110C (230F), plus a variety of
dilute acids, oil free air, and many chemical services.
They are not recommended for petroleum services.
For low temperature and vacuum systems, a TriSeal Grade E EPDM gasket with rigid coupling is
recommended.
U,i`q i>`>>`>`
U">}iq i>`>>
Ui`]<V>>i`>
Bolt/Nut Specifications
UANSI: Carbon steel oval neck bolts and nuts are
heat-treated and conform to the physical properties
of ASTM A 183 Grade 2 and SAE J429 Grade
5 with a minimum tensile strength of 7584 Bar
(110,000 psi).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995
Grade 5. Bolts and nuts are zinc-electroplated
conforming to ASTM B 633.
Plain End
Systems
Fitting Specifications
Tech Data Sheet: G192
Fitting Specifications
U
>Lii\>VV`}-/x]>`i
U/iii}]{ >(60,000 psi)
U9i`i}]2413 Bar (35,000 psi)
U-iqx (1 14" 10") Schedule 40
Coatings
U">}iq i>`>>`>`
U,i`q i>`>>]i}>
Ui`]<V}>>i`>
197
B
B
Part
Number
909AE0060
Plain End
Systems
909AE0073
909AE0076
909AE0089
909AE0114
909AE0165
909AE0168
909AE0219
909AE0273
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
60.3
50
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76.1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
150
165.1
165.1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
Max.
Pressures
Bar
psi
Max.
End Load
kN
Lbs.
51.7
750
41.4
600
41.4
600
41.4
600
31
450
20.7
300
20.7
300
17.2
250
17.2
250
14.78
3322.6
17.33
3895.1
23.00
5,170.6
25.68
5772.7
31.83
7,156.9
44.30
9,959.0
46.00
10,341.5
64.97
14,606.6
100.93
22,690.6
A
mm
Inches
93.7
3.69
105.9
4.17
111.9
4.41
122.2
4.81
150.6
5.93
203.7
8.02
208.0
8.19
271.5
10.69
333.5
13.13
Dimensions
B
mm
Inches
146.1
5.75
158.8
6.25
181.1
7.13
192.0
7.56
219.2
8.63
293.7
11.56
296.7
11.68
346.2
13.63
403.4
15.88
C
mm
Inches
84.1
3.31
84.1
3.31
98.6
3.88
84.1
3.31
98.6
3.88
293.6
11.56
108.0
4.25
124.7
4.91
124.7
4.91
Coupling Bolts
Size
Qty.
mm
Inches
M16 x 90
2
5
8 x 3 1 2
M16 x 90
2
5
8 x 3 1 2
M20 x 121
2
3
4 x 4 3 4
M20 x 121
2
3
4 x 4 3 4
M20 x 121
2
3
4 x 4 3 4
M24 x 165
2
1 x 6 1 2
M24 x 165
2
1 x 6 1 2
M22 x 140
4
7
8 x 5 1 2
M22 x 140
4
7
8 x 5 1 2
Approx.
Weight
Kg.
Lbs.
2.4
5.4
2.7
5.9
2.1
4.6
4.1
9.0
6.1
13.5
9.8
21.6
10.7
23.5
15.9
35.1
22.0
48.5
198
www.grinnell.com
Figure 901 45
Plain End Elbows
C to E
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
120.7
4.75
139.7
5.50
139.7
5.50
158.8
6.25
196.9
7.75
248.0
9.75
248.0
9.75
254.0
10.00
254.0
10.00
279.4
11.00
292.1
11.50
342.9
13.50
0.8
1.8
1.4
3.1
1.5
3.2
2.2
4.8
3.4
7.5
5.1
11.3
5.3
11.6
7.7
16.9
7.5
16.6
13.4
29.6
22.0
48.5
30.1
66.4
C to E
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2
2.375
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
79.5
3.13
88.9
3.50
88.9
3.50
95.3
3.75
108.0
4.25
127.0
5.00
127.0
5.00
146.1
5.75
146.1
5.75
152.4
6.00
0.6
1.3
1.0
2.1
1.0
2.2
1.6
3.5
2.5
5.5
3.5
7.7
3.7
8.1
5.0
11.0
5.1
11.2
8.6
19.0
250
273.0
165.1
12.7
10
300
12
10.750
323.9
12.750
6.50
177.8
7.00
28.0
22.0
48.0
Plain End
Systems
199
C to E
Plain End
Systems
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2.375
2
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
108.0
4.25
139.7
5.50
139.7
5.50
158.8
6.25
203.3
8.00
248.0
9.75
248.0
9.75
282.7
11.13
282.7
11.13
358.9
14.13
1.2
2.7
1.9
4.2
2.0
4.4
2.9
6.5
5.2
11.5
8.6
19.0
8.8
19.4
12.0
26.4
12.6
27.9
24.7
54.5
250
10
273.0
10.750
435.1
17.13
47.0
103.7
300
12
323.9
12.750
511.3
20.13
67.0
147.8
200
C to E
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2.375
2
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
79.5
3.13
88.9
3.50
88.9
3.50
95.3
3.75
114.3
4.50
127.0
5.00
127.0
5.00
149.4
5.88
149.4
5.88
181.1
7.13
212.9
8.38
244.6
9.36
0.8
1.8
1.3
2.9
1.4
3.1
2.1
4.6
3.4
7.5
5.7
12.5
5.7
12.5
5.4
12.0
5.4
12.0
15.4
34.0
25.4
56.0
44.5
98.0
www.grinnell.com
Figure 927
Plain End Crosses
C to E
C to E
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2.375
2
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
139.7
139,7mm
5.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
82.6
3.25
95.3
3.75
95.3
3.75
108.0
4.25
127.0
5.00
139.7
5.50
139.7
5.50
165.1
6.50
165.1
6.50
254.0
10.00
292.1
11.50
342.9
13.50
1.2
2.7
2.0
4.4
2.9
6.5
2.9
6.5
4.8
10.7
6.9
15.2
7.0
15.5
11.0
24.2
10.4
23.0
19.8
43.7
25.9
57.0
49.9
110.0
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2.375
2
65
73.0
2 1 2
2.875
65
76.1
76,1mm
3.000
80
88.9
3
3.500
100
114.3
4
4.500
125
141.3
5
5.563
150
165.1
165,1mm
6.500
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
E to E
mm
Inches
Approx.
Weight
kg
Lbs.
108.0
4.25
120.7
4.75
120.7
4.75
130.3
5.13
149.4
5.88
175.0
6.88
193.8
7.63
193.8
7.63
254.0
10.00
292.1
11.50
342.9
13.50
1.7
3.7
2.6
5.8
2.7
6.0
3.9
8.6
9.4
20.7
8.4
18.5
12.4
27.3
13.0
28.6
21.7
48.0
34.0
75.0
43.4
95.8
Plain End
Systems
201
Figure 960
Plain End Caps
C to LE
E to E
C to SE
Plain End
Systems
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2
2.375
65
73.0
2 1 2
2.875
80
88.9
3
3.500
100
114.3
4
4.500
125
141.3
5
5.563
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to LE
mm
Inches
C to SE
mm
Inches
Approx.
Weight
kg
Lbs.
108.0
4.25
120.7
4.75
130.3
5.13
149.4
5.88
175.0
6.88
193.8
7.63
254.0
10.00
292.1
11.50
342.9
13.50
69.9
2.75
76.2
3.00
82.6
3.25
95.3
3.75
101.6
4.00
114.3
4.50
152.4
6.00
165.1
6.50
177.8
7.00
1.1
2.5
2.0
4.4
2.9
6.4
4.8
10.5
6.9
15.2
10.4
22.9
19.0
41.9
30.0
66.2
39.8
87.7
202
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2
2.375
65
73.0
2 1 2
2.875
80
88.9
3
3.500
100
114.3
4
4.500
125
141.3
5
5.563
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
E to E
mm
Inches
Approx.
Weight
kg
Lbs.
102.0
4.00
127.0
5.00
152.4
6.00
178.0
7.00
216.0
8.50
254.0
10.00
279.4
11.00
330.2
13.00
355.6
14.00
1.0
2.3
1.4
3.0
2.0
4.5
3.4
7.5
5.7
12.5
7.7
17.0
13.2
29.0
11.1
24.5
14.1
31.0
www.grinnell.com
Figure 914
Plain End Laterals
C to E
Pipe Size
Nominal
mm
Inches
80 x 80 x 50
3x3x2
100 x 100 x 50
4x4x2
100 x 100 x 65
4 x 4 x 2 1 2
100 x 100 x 80
4x4x3
150 x 150 x 50
6x6x2
150 x 150 x 80
6x6x3
150 x 150 x 100
6x6x4
200 x 200 x 50
8x8x2
200 x 200 x 80
8x8x3
200 x 200 x 100
8x8x4
200 x 200 x 125
8x8x5
200 x 200 x 150
8x8x6
250 x 250 x 100
10 x 10 x 4
250 x 250 x 150
10 x 10 x 6
250 x 250 x 200
10 x 10 x 8
250 x 250 x 100
12 x 12 x 6
250 x 250 x 150
12 x 12 x 8
250 x 250 x 200
12 x 12 x 10
O.D.
mm
Inches
88.9 x 88.9 x 60.3
3.500 x 3.500 x 2.375
114.3 x 114.3 x 60.3
4.500 x 4.500 x 2.375
114.3 x 114.3 x 73.0
4.500 x 4.500 x 2.875
114.3 x 114.3 x 88.9
4.500 x 4.500 x 3.500
168.3 x 168.3 x 60.3
6.625 x 6.625 x 2.375
168.3 x 168.3 x 88.9
6.625 x 6.625 x 3.500
168.3 x 168.3 x 114.3
6.625 x 6.625 x 4.500
219.1 x 219.1 x 60.3
8.625 x 8.625 x 2.375
219.1 x 219.1 x 88.9
8.625 x 8.625 x 3.500
219.1 x 219.1 x 114.1
8.625 x 8.625 x 4.500
219.1 x 219.1 x 141.3
8.625 x 8.625 x 5.563
219.1 x 219.1 x 168.3
8.625 x 8.625 x 6.625
273.0 x 273.0 x 114.3
10.750 x 10.750 x 4.500
273.0 x 273.0 x 168.3
10.750 x 10.750 x 6.625
323.9 x 323.9 x 219.1
10.750 x 10.750 x 8.625
323.9 x 323.9 x 168.3
12.750 x 12.750 x 6.625
323.9 x 323.9 x 219.1
12.750 x 12.750 x 8.625
323.9 x 323.9 x 273.0
12.750 x 12.750 x 10.750
C to E
mm
Inches
Approx.
Weight
kg
Lbs.
130.3
5.13
149.4
5.88
149.4
5.88
149.4
5.88
193.8
7.63
193.8
7.63
193.8
7.63
254.0
10.00
254.0
10.00
254.0
10.00
254.0
10.00
254.0
10.00
292.1
11.50
292.1
11.50
292.1
11.50
342.9
13.50
342.9
13.50
342.9
13.50
3.2
7.1
4.1
9.1
4.3
9.5
4.4
9.7
8.8
19.4
9.5
21.0
9.9
21.8
16.4
36.2
16.6
36.5
16.9
37.2
16.7
36.8
17.0
37.4
26.3
58.0
27.2
66.0
28.1
62.0
36.7
80.9
34.6
76.3
35.2
77.6
C to LE
C to LE
C to SE
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
50
60.3
2
2.375
65
73.0
2 1 2
2.875
80
88.9
3
3.500
100
114.3
4
4.500
125
141.3
5
5.563
150
168.3
6
6.625
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
C to LE
mm
Inches
C to SE
mm
Inches
Approx.
Weight
kg
Lbs.
184.2
7.25
197.0
7.75
222.3
8.75
273.1
10.75
324.0
12.75
355.6
14.00
457.2
18.00
527.1
20.75
622.3
24.50
69.9
2.75
76.2
3.00
82.6
3.25
95.3
3.75
101.6
4.00
114.3
4.50
152.4
6.00
165.1
6.50
177.8
7.00
2.0
4.5
3.5
7.7
5.0
11.0
8.5
18.7
13.3
29.4
19.1
42.2
32.2
70.9
30.0
66.2
39.8
87.7
Plain End
Systems
203
E to E
Plain End
Systems
Nominal
mm
Inches
65 x 50
2 1 2 x 2
80 x 50
3x2
80 x 65
3 x 2 1 2
100 x 50
4x2
100 x 65
4 x 2 1 2
100 x 80
4x3
125 x 50
5x2
125 x 80
5x3
125 x 100
5x4
150 x 50
6x2
150 x 65
6 x 2 1 2
150 x 80
6x3
150 x 100
6x4
150 x 125
6x5
200 x 80
8x3
200 x 100
8x4
200 x 150
8x6
250 x 80
10 x 3
250 x 100
10 x 4
250 x 150
10 x 6
250 x 200
10 x 8
300 x 150
12 x 6
300 x 200
12 x 8
300 x 250
12 x 10
O.D.
mm
Inches
73.0 x 60.3
2.875 x 2.375
88.9 x 60.3
3.500 x 2.375
88.9 x 73.0
3.500 x 2.875
114.3 x 60.3
4.500 x 2.375
114.3 x 73.0
4.500 x 2.875
114.3 x 88.9
4.500 x 3.500
141.3 x 60.3
5.563 x 2.375
141.3 x 88.9
5.563 x 3.500
141.3 x 114.3
5.563 x 4.500
168.3 x 60.3
6.625 x 2.375
168.3 x 73.0
6.625 x 2.875
168.3 x 88.9
6.625 x 3.500
168.3 x 114.3
6.625 x 4.500
168.3 x 141.3
6.625 x 5.563
219.1 x 88.9
8.625 x 3.500
219.1 x 114.3
8.625 x 4.500
219.1 x 168.3
8.625 x 6.625
273.0 x 88.9
10.750 x 3.500
273.0 x 114.3
10.750 x 4.500
273.0 x 168.3
10.750 x 6.625
273.0 x 219.1
10.750 x 8.625
323.9 x 168.3
12.750 x 6.625
323.9 x 219.1
12.750 x 8.625
323.9 x 273.0
12.750 x 10.750
E to E
mm
Inches
Approx.
Weight
kg
Lbs.
177.8
7.00
203.2
8.00
203.2
8.00
228.6
9.00
228.6
9.00
228.6
9.00
279.4
11.00
279.4
11.00
279.4
11.00
304.8
12.00
304.8
12.00
304.8
12.00
304.8
12.00
304.8
12.00
330.2
13.00
330.2
13.00
330.2
13.00
381.0
15.00
381.0
15.00
381.0
15.00
381.0
15.00
406.4
16.00
406.4
16.00
406.4
16.00
1.6
3.5
2.3
5.0
2.3
5.0
3.6
8.0
3.6
8.0
3.6
8.0
5.4
12.0
5.4
12.0
5.4
12.0
8.6
19.0
8.6
19.0
8.6
19.0
8.6
19.0
8.6
19.0
X
X
X
X
X
X
X
X
X
X
204
www.grinnell.com
Figure 991
Fabricated Adapter Nipple
Plain x Male BSP Thread
E to E
Pipe Size
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
E to E
mm
Inches
Approx.
Weight
kg
Lbs.
101.6
4.00
101.6
4.00
101.6
4.00
154.4
6.00
154.4
6.00
154.4
6.00
154.4
6.00
0.5
1.2
0.9
1.9
1.1
2.5
2.4
5.4
3.3
7.3
4.3
9.4
6.4
14.2
Figure 992
Fabricated Adapter Nipple
Plain x Groove
E to E
Plain End
Systems
Figure 993
Fabricated Adapter Nipple
Plain x Bevel
E to E
205
Figure 941
Plain End Flange Adapter
ANSI Class 150#
Figure 942
Plain End Flange Adapter
ANSI Class 300#
E to E
E to E
Pipe Size
Plain End
Systems
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
206
www.grinnell.com
RING JOINT
SYSTEMS
207
Model R-88
Large Diameter Ring Joint
Page 212
COUPLING MATERIAL
SPECIFICATIONS
Housing:
UVi-/x]x{x>`
to ASTM A 395, Gr. 65-45-15, min. tensile strength
4481 Bar (65,000 psi).
Sizes 200 to 650mm (8" to 26) consist of two
housing segments
700 to 950mm (28" to 38) consist of six
housing segments
1000 to 2400mm (40" to 96) consist of eight
housing segments
Model RH-1000
1000 PSI Ring Joint Coupling
Page 213
Model RX-3000
3000 PSI Ring Joint Coupling
Page 214
Surface Finish:
U->`>`>i`>}i,i`
U"`V}>>i`
U"
>},i`i
colours
U"*>`i V>}
Weld Rings:
U
>L-ii-
{ -
Model RX-3770
3770 PSI Ring Joint Coupling
Page 215
RJ-10
90 Ring Joint Elbow
Page 216
RJ-11
45 Ring Joint Elbow
Page 217
RJ-20
Ring Joint Tee
Page 217
RJ-21
Reducing Tee
Page 218
Ring
Joint
Systems
RJ-50
Concentric Reducer
Page 219
RJ-51
Eccentric Reducer
Page 219
RJ-60
45 Ring Joint Cap
Page 220
RJ-70
Flange Adapter
Page 220
U->iii\{]]
Rubber Gasket:
U>`i
* (Colour code: Green stripe)
Good for cold & hot water up to 110C (230F).
Also good for services for water with acid, water
with chlorine, deionized water, seawater and waste
water, dilute acids, oil-free air and many chemicals.
Not recommended for petroleum oils, minerals oils,
solvents and aromatic hydrocarbons.
Maximum Temperature Range: -34C to 110C
(-30F to 230F)*.
*EPDM gaskets for water services are not
recommended for steam services unless couplings
or components are accessible for frequent gasket
replacement.
U">`i/ i (Colour code: Orange
stripe) Recommended for petroleum products, air
with oil vapors, vegetable and mineral oils within the
specified temperature range. Also good for water
services under 66C (150F). Temperature range:
-29C to 82C (-20F to 180F).
Do not use for HOT WATER above 66C (150F) or
HOT DRY AIR above 60C (140F).
U"i\>`iq>}i>i`
Butyl.
For additional details contact a GRINNELL Sales
Representative.
www.grinnell.com
XS
0.5"
Bar
psi
STD
0.375"*
Bar
psi
LW
0.25" /
0.312"^
Bar
psi
53.6
777
42.8
621
36.0
522
32.8
475
28.6
415
25.4
368
22.8
331
19.0
275
21.9
318
20.3
295
19.0
275
17.8
258
15.8
229
15.0
217
14.2
206
12.9
187
200
109.4
69.4
8
1586
1006
250
87.0
63.0
10
1262
913
300
72.9
54.3
12
1058
788
350
66.3
49.4
14
962
717
400
57.8
43.1
16
839
625
450
51.3
38.3
18
744
555
500
46.1
34.4
20
668
499
600
38.3
28.6
24
555
415
650
35.3
26.3
26
512
382
700
32.8
24.5
28
475
355
750
30.5
22.8
30
443
331
800
28.6
21.4
32
415
310
900
25.4
19.0
36
368
275
950
24.1
18.0
38
349
261
1000
22.8
17.1
40
331
248
1050
21.7
16.3
42
315
236
1100
20.8
15.5
44
301
225
1200
19.0
14.2
48
275
206
1300
17.5
13.1
52
254
190
1350
16.9
12.6
54
245
183
1400
16.3
12.2
56
236
177
1500
15.2
11.4
60
220
165
1650
13.8
10.3
66
200
150
1700
13.4
10.0
68
194
145
1800
12.6
9.4
72
183
137
2100
10.8
8.1
84
157
118
2400
9.4
7.1
96
137
103
Except * 200mm (8" ): 8.2mm (0.322" );
250 to 600mm (10" to 24" ): 6.4mm (0.25" );
650 to 1050mm (26" to 42" ): 7.9mm (0.312" )
Housing Segment
Gasket
Factory Supplied
Weld Rings
2SE (tm-A)
Do - 2y (tm - A)
Where:
P = Maximum internal service pressure (psi)
Ring
Joint
Systems
General notes:
Additional information is included in our data sheets and is available upon
request. It is the Designers responsibility to select products suitable for the
intended service and to ensure that pressure ratings and performance data
is not exceeded. Always read and understand the installation constructions.
Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material
and gasket selection should be verified with the gasket recommendation
listing for the specific application.
209
Typical applications
U7>iE7>i7>i/i>i*>
U}E/i }
U*E*>i
U`iiVV*>
U
i
iVV*>
U`E ii>}i
U
ii`
U6
Ring
Joint
Systems
Pressure-Temperature Rating
Size
mm
Inches
Nom.
Rating
Working Pressure
(STD)
200 - 600
8" 24"
Class
250
20 Bar @38C
300 psi @100F
650
26"
Class
150
20 Bar @38C
300 psi @100F
700 - 900
28" - 36"
Class
150
20 Bar @38C
300 psi @100F
950 - 2400
38" 96"
Class
125
12 Bar @38C
175 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
www.grinnell.com
C
B
A
R
Pipe Size
Nominal
mm
Inches
O.D.
mm
Inches
200
8
250
10
300
12
350 (R-88N)
14
400 (R-88N)
16
450 (R-88N)
18
500(R-88N)
20
600 (R-88N)
24
650 (R-88N)
26
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
660.4
26.000
L
E
PIPE O.D.
6
4
6
1
4
8
5
16
8
5
16
8
5
16
8
5
16
9.5
3
8
12.7
1
2
12.7
1
2
1
4.8
0.19
4.8
0.19
4.8
0.19
6.4
0.25
6.4
0.25
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
7.6
16.8
10.1
22.2
14.0
30.8
17.4
38.3
18.7
41.1
23.1
50.8
38.2
84.0
49.7
109.3
78.7
173.5
Ring
Joint
Systems
211
L
E
PIPE O.D.
B
C
A
R-88
-88
Size: 1200mm (48")
Ring
Joint
Systems
212
www.grinnell.com
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(STD)
Class
400
70 Bar @38C
1000 psi @100F
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
L
E
PIPE O.D.
Pipe Size
Nominal
mm
Inches
200
8
250
10
300
12
O.D.
mm
Inches
219.1
8.625
273.0
10.750
323.9
12.750
Max.
Working
Pressure
Bar
psi
70
1000
70
1000
70
1000
Dimensions
A
mm
Inches
282
11.10
340
13.32
415
16.33
B
mm
Inches
372
14.65
430
16.93
510
20.07
Bolt / Nut
C
mm
Inches
98
3.86
108
4.25
106
4.17
Size
in
No.
2
2
2
1" x 140
1" x 165
1" x 165
Pipe-end Preparation
Deflection
()
0 18'
0 38'
0 32'
R
mm
Inches
12
0.47
12
0.47
12
0.47
L
mm
Inches
25
1
25
1
25
1
E (max)
mm
Inches
3.2
0.13
3.2
0.13
3.2
0.13
Ring
Joint
Systems
Approx.
Weight
kg
Lbs.
18.1
39.8
26.0
57.2
33.0
72.6
213
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
(STD)
Class
1500
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
A
R
Ring
Joint
Systems
L
E
PIPE O.D.
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
200
219.1
8
8.625
250
273.0
10
10.748
300
323.9
12
12.752
Max.Working
Pressure
Bar
psi
210
3000
210
3000
210
3000
A
mm
Inches
300
11.81
380
14.96
470
18.5
Dimensions
B
mm
Inches
394
15.51
481
18.93
572
22.48
Bolt / Nut*
C
mm
Inches
148
5.83
152
5.98
173
6.81
Qty.
2
4
4
Size
in
1 1 8 x 130
1 x 165
1 1 2 " x 160
Pipe-end Preparation
R
L
E
mm
mm
mm
Inches
Inches Inches
12.0 - 12.7
31
3
1
0.472 - 0.500 1.22
8
15.9 - 16.0
31
3
1
0.625 - 0.629 1.22
8
15.9 - 16.0
31
3
1
0.625 - 0.629 1.22
8
Approx.
Weight
kg
Lbs.
35.87
78.92
52.78
116.36
96.24
212.27
*Bolt & nuts are UNC threaded. @ 12.7mm ( 1 2" ) and 15.9mm ( 5 8" ) steel rings are also available upon request.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 209 for Ring Joint specifications
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
214
www.grinnell.com
Pressure-Temperature Rating
Nom.
Rating
Working Pressure
Class
2000
Max. Service
Temperature
EPDM: 110C
EPDM: 230F
Nitrile: 82C
Nitrile: 180F
L
E
PIPE O.D.
Nominal
Size
mm
Inches
Pipe
OD
mm
Inches
Max. Working
Pressure
Bar
psi
150
6
200
8
250
10
300
12
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
260
3770
260
3770
260
3770
260
3770
Dimensions
A
B
mm
mm
Inches
Inches
260
321
10.24
12.64
329
414
12.95
16.30
404
505
15.90
19.88
482
587
19.0
23.10
Bolt / Nut*
C
mm
Inches
149
5.87
175
6.89
188
7.40
219
8.63
Size
in
No.
7
4
4
4
4
8 " x 165
1" x 165
1 1 2 " x 175
1 1 2 " x 175
Pipe-end Preparation
R
L
E
mm
mm
mm
Inches
Inches
Inches
12
31
5
0.472
1.22
0.20
16
38
5
0.625
1.50
0.20
19
38
5
0.750
1.50
0.20
22
38
6
0.875
1.50
0.24
Approx.
Weight
kg
Lbs.
Ring
Joint
Systems
27.7
61.2
49.9
110.0
79.2
174.5
112.3
247.1
215
Surface Finish:
U->`>`>i`vi>}i,
red.
U`V}>>i`"
U
>},i`iV
(Option)
Rings:
U
>L-ii
U->iii\{]]
General Notes:
U>7}*ii
7*Vv
ratings of installed coupling.
Ui`/i\iiii>
Liii``>V>>ii>
working pressure listed (AWWA C606 5.2.3).
Ring
Joint
Systems
U7>}\*}i>>Li
depressurized and drained before attempting
disassembly and or removal of any components.
U9i>i`7>>>V>Li
scalding or hot water services or other high
temperature applications. Visit Shurjoint website for
full warranty.
U-iiii}V>}iiVvV>]
designs and or standard equipment without notice
and without incurring any obligation.
216
C to E
C to E
Pipe Size
Approx.
C-E
Weight
Nominal
O.D.
mm
kg
mm
mm
Inches
Lbs.
Inches
Inches
200
219.1
197
13.0
8.625
7.75
28.6
8
250
273.0
229
25.0
10
10.750
9.00
55.0
300
323.9
254
35.0
12
12.750
10.00
77.0
350
355.6
280
37.0
14
14.000
11.00
81.4
400
406.4
305
45.0
16
16.000
12.00
99.0
450
457.2
686
95.0
18
18.000
27.0
209.0
500
508.0
762
138.0
20
20.000
30.0
203.6
600
609.6
914
220.0
24
24.000
36.0
485.0
650
660.4
991
237.0
26
26.000
39.00
521.0
700
711.2
1067
275.0
28
28.000
42.00
605.0
750
76.20
1143
316.0
30
30.000
45.00
695.0
800
812.8
1219
360.0
32
32.000
48.00
792.0
850
863.4
1295
407.0
34
34.000
51.00
895.0
900
914.4
1372
457.0
36
36.000
54.00
1005.0
1000
1016.0
1524
564.0
40
40.000
60.00
1241.0
1050
1066.8
1600
622.0
42
42.000
63.00
1368.0
1100
1117.6
1676
683.0
44
44.000
66.00
1503.0
1200
1219.2
1829
814.0
48
48.000
72.00
1790.0
U
v,n>`>}iiVv - i
sizes are to manufacturer's standard.
Refer to the Shurjoint technical data sheet for complete technical
information and installation instructions. More information
about Shurjoint Piping Products can be found on page 14 in the
General Data section of this book or on www.shurjoint.com.
See left column for Ring Joint specifications
For information on alternative sizes, contact a GRINNELL Sales
Representative.
For instructions on part numbers, ordering information, and
availability, refer to page 15 or contact a GRINNELL Sales
Representative.
www.grinnell.com
C to E
C to E
C to E
Pipe Size
Approx.
C-E
Weight
Nominal
O.D.
mm
kg
mm
mm
Inches
Lbs.
Inches
Inches
200
219.1
108
9.5
8.625
4.25
20.9
8
250
273.0
121
18.0
10
10.750
4.75
39.6
300
323.9
133
23.0
12
12.750
5.25
50.6
350
355.6
152
24.0
14
14.000
6.00
52.8
400
406.4
184
46.0
16
16.000
7.25
101.2
450
457.2
286
48.0
18
18.000
11.25
105.6
500
508.0
318
50.0
20
20.000
12.50
110.0
600
609.6
381
80.0
24
24.000
15.00
176.0
650
660.4
406
119.0
26
26.000
16.00
262.0
700
711.2
438
138.0
28
28.000
17.25
304.0
750
76.20
480
158.0
30
30.000
18.50
348.0
800
812.8
502
180.0
32
32.000
19.75
396.0
850
863.4
533
204.0
34
34.000
21.00
449.0
900
914.4
565
229.0
36
36.000
22.25
504.0
1000
1016.0
632
282.0
40
40.000
24.88
620.0
1050
1066.8
660
311.0
42
42.000
26.00
684.0
1100
1117.6
696
342.0
44
44.000
27.39
752.0
1200
1219.2
759
407.0
48
48.000
29.88
895.0
U
v,{x18" ) and larger sizes conform to ANSI B16.9.
All other sizes are to manufacturer's standard.
Refer to the Shurjoint technical data sheet for complete technical
information and installation instructions. More information
about Shurjoint Piping Products can be found on page 14 in the
General Data section of this book or on www.shurjoint.com.
See page 216 for Ring Joint specifications
For information on alternative sizes, contact a GRINNELL Sales
Representative.
For instructions on part numbers, ordering information, and
availability, refer to page 15 or contact a GRINNELL Sales
Representative.
Pipe Size
Approx.
C-E
Weight
Nominal
O.D.
mm
kg
mm
mm
Inches
Lbs.
Inches
Inches
200
219.1
197
21.0
7.75
46.2
8
8.625
250
273.0
229
33.0
10
10.750
9.00
72.6
300
323.9
254
47.0
12
12.750
10.00
103.4
350
355.6
280
54.0
14
14.000
11.00
118.8
400
406.4
305
70.0
16
16.000
12.00
154.0
450
457.2
394
122.0
18
18.000
15.50
268.0
500
508.0
438
153.0
20
20.000
17.25
337.0
600
609.6
508
212.0
24
24.000
20.00
466.0
650
660.4
572
348.0
26
26.000
22.50
766.0
700
711.2
597
392.0
28
28.000
23.50
862.0
750
76.20
635
451.0
30
30.000
25.00
992.0
800
812.8
673
516.0
32
32.000
26.50
1135.0
850
863.4
711
584.0
34
34.000
28.00
1285.0
900
914.4
762
657.0
36
36.000
30.00
1445.0
1000
1016.0
838
814.0
40
40.000
33.00
1790.0
1050
1066.8
889
837.0
42
42.000
35.00
1841.0
1100
1117.6
914
943.0
44
44.000
36.00
2075.0
1200
1219.2
1016
1131.0
48
48.000
40.00
2488.0
U
v,>`,{x18" ) and larger sizes and E-E of
R-60 650mm (26" ) and larger sizes conform to ANSI B16.9. All
other sizes are to manufacturer's standard.
Refer to the Shurjoint technical data sheet for complete technical
information and installation instructions. More information
about Shurjoint Piping Products can be found on page 14 in the
General Data section of this book or on www.shurjoint.com.
See page 216 for Ring Joint specifications
For information on alternative sizes, contact a GRINNELL Sales
Representative.
For instructions on part numbers, ordering information, and
availability, refer to page 15 or contact a GRINNELL Sales
Representative.
Ring
Joint
Systems
217
C to B
C to E
Pipe Size
Ring
Joint
Systems
Nominal
mm
Inches
350 x 300
14 x 12
400 x 300
16 x 12
400 x 350
16 x 14
450 x 300
18 x 12
450 x 350
18 x 14
450 x 400
18 x 16
500 x 300
20 x 12
500 x 350
20 x 14
500 x 400
20 x 16
500 x 450
20 x 18
600 x 300
24 x 12
600 x 350
24 x 14
600 x 400
24 x 16
600 x 450
24 x 18
600 x 500
24 x 20
O.D.
mm
Inches
355.6 x 323.9
14.000 x 12.750
406.4 x 323.9
16.000 x 12.750
406.4 x 355.6
16.000 x 14.000
457.2 x 323.9
18.000 x 12.750
457.2 x 355.6
18.000 x 14.000
457.2 x 406.4
18.000 x 16.000
508.0 x 323.9
20.000 x 12.750
508.0 x 355.6
20.000 x 14.000
508.0 x 406.4
20.000 x 16.000
508.0 x 457.2
20.000 x 18.000
609.6 x 323.9
24.000 x 12.750
609.6 x 355.6
24.000 x 14.000
609.6 x 406.4
24.000 x 16.000
609.6 x 457.2
24.000 x 18.000
609.6 x 508.0
24.000 x 20.000
C-E
mm
Inches
C-B
mm
Inches
Approx.
Weight
kg
Lbs.
279
11.00
305
12.00
305
12.00
343
13.50
343
13.50
343
13.50
381
15.00
381
15.00
381
15.00
381
15.00
432
17.00
432
17.00
432
17.00
432
17.00
432
17.00
270
10.62
295
11.62
305
12.00
321
12.62
330
13.00
330
13.00
346
13.62
356
14.00
356
14.00
368
14.50
397
15.62
406
16.00
406
16.00
419
16.50
432
17.00
66.0
145.0
78.0
172.0
80.0
176.0
112.0
246.0
115.0
253.0
120.0
264.0
135.0
297.0
138.0
304.0
144.0
317.0
149.0
328.0
180.0
396.0
185.0
407.0
190.0
418.0
197.0
433.0
202.0
444.0
C-E: Mfr's standard. E-E marked (*): Mfr's standard (made of ductile iron). All other E-E: ANSI B16.9.
Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint
Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.
See page 216 for Ring Joint specifications
For information on alternative sizes, contact a GRINNELL Sales Representative.
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
218
www.grinnell.com
E to E
E to E
Pipe Size
Nominal
mm
Inches
350 x 300
14 x 12
400 x 300
16 x12
400 x 350
16 x 14
450 x 300
18 x 12
450 x 350
18 x 14
450 x 400
18 x 16
500 x 300
20 x 12
500 x 350
20 x 14
500 x 400
20 x 16
500 x 450
20 x 18
600 x 300
24 x 12
600 x 350
24 x 14
600 x 400
24 x 16
600 x 450
24 x 18
600 x 500
24 x 20
O.D.
mm
Inches
355.6 x 323.9
14.000 x 12.750
406.4 x 323.9
16.000 x 12.750
406.4 x 355.6
16.000 x 14.000
457.2 x 323.9
18.000 x 12.750
457.2 x 355.6
18.000 x 14.000
457.2 x 406.4
18.000 x 16.000
508.0 x 323.9
20.000 x 12.750
508.0 x 355.6
20.000 x 14.000
508.0 x 406.4
20.000 x 16.000
508.0 x 457.2
20.000 x 18.000
609.6 x 323.9
24.000 x 12.750
609.6 x 355.6
24.000 x 14.000
609.6 x 406.4
24.000 x 16.000
609.6 x 457.2
24.000 x 18.000
609.6 x 508.0
24.000 x 20.000
E-E
mm
Inches
Approx.
Weight
kg
Lbs.
203*
8.00
229*
9.00
229*
9.00
241*
9.50
381
15.00
381
15.00
254*
10.00
508
20.0
508
20.0
508
20.00
305*
12.00
508
20.00
305*
12.00
508
20.00
305*
12.00
23.0
51.0
29.0
64.0
29.0
64.0
33.0
72.6
36.0
79.0
36.0
79.0
43.0
95.0
45.0
99.0
46.0
101.0
58.0
128.0
70.0
154.0
70.0
154.0
70.0
154.0
70.0
154.0
71.0
156.0
Pipe Size
Nominal
mm
Inches
350 x 300
14 x 12
400 x 300
16 x 12
400 x 350
16 x 14
450 x 300
18 x 12
450 x 350
18 x 14
450 x 400
18 x 16
500 x 300
20 x 12
500 x 350
20 x 14
500 x 400
20 x 16
500 x 450
20 x 18
600 x 300
24 x 12
600 x 350
24 x 14
600 x 400
24 x 16
600 x 450
24 x 18
600 x 500
24 x 20
O.D.
mm
Inches
355.6 x 323.9
14.000 x 12.750
406.4 x 323.9
16.000 x 12.750
406.4 x 355.6
16.000 x 14.000
457.2 x 323.9
18.000 x 12.750
457.2 x 355.6
18.000 x 14.000
457.2 x 406.4
18.000 x 16.000
508.0 x 323.9
20.000 x 12.750
508.0 x 355.6
20.000 x 14.000
508.0 x 406.4
20.000 x 16.000
508.0 x 457.2
20.000 x 18.000
609.6 x 323.9
24.000 x 12.750
609.6 x 355.6
24.000 x 14.000
609.6 x 406.4
24.000 x 16.000
609.6 x 457.2
24.000 x 18.000
609.6 x 508.0
24.000 x 20.000
E-E
mm
Inches
Approx.
Weight
kg
Lbs.
330
13.00
229*
9.00
229*
9.00
381
15.00
381
15.00
381
15.00
508
20.00
508
20.0
508
20.0
508
20.00
508
20.00
508
20.00
508
20.00
508
20.00
508
20.00
23.0
51.0
29.0
64.0
29.0
64.0
35.0
78.0
36.0
79.0
36.0
79.0
43.0
95.0
45.0
99.0
46.0
101.0
58.0
128.0
70.0
154.0
70.0
154.0
70.0
154.0
70.0
154.0
71.0
156.0
Ring
Joint
Systems
219
E to E
Ring
Joint
Systems
220
Pipe Size
Approx.
E-E
Weight
Nominal
O.D.
mm
kg
mm
mm
Inches
Lbs.
Inches
Inches
200
219.1
76
5.5
3.00
12.1
8
8.625
250
273.0
76
6.0
10
10.750
3.00
13.2
300
323.9
76
8.0
12
12.750
3.00
17.6
350
355.6
102
12.0
14
14.000
4.00
26.4
400
406.4
102
15.0
16
16.000
4.00
33.0
450
457.2
127
21.0
18
18.000
5.00
46.2
500
508.0
152
26.0
20
20.000
6.00
57.2
600
609.6
152
35.0
24
24.000
6.00
77.0
650
660.4
267
50.0
26
26.000
10.50
110.0
700
711.2
267
56.0
28
28.000
10.50
123.0
750
76.20
267
62.0
30
30.000
10.50
136.0
800
812.8
267
113.0
32
32.000
10.50
248.6
850
863.4
267
75.0
34
34.000
10.50
165.0
900
914.4
267
152.0
36
36.000
10.50
334.4
1000
1016.0
305
102.0
40
40.000
12.00
224.0
1050
1066.8
305
110.0
42
42.000
12.00
242.0
1100
1117.6
343
126.0
44
44.000
13.50
277.0
1200
1219.2
343
143.0
48
48.000
13.50
315.0
U
v,>`,n>`>}ii>`
v,
and larger sizes conform to ANSI B16.9. All other sizes are to
manufacturer's standard.
Refer to the Shurjoint technical data sheet for complete technical
information and installation instructions. More information
about Shurjoint Piping Products can be found on page 14 in the
General Data section of this book or on www.shurjoint.com.
See page 216 for Ring Joint specifications
For information on alternative sizes, contact a GRINNELL Sales
Representative.
For instructions on part numbers, ordering information, and
availability, refer to page 15 or contact a GRINNELL Sales
Representative.
GRINNELL reserves the right to change the contents without notice.
E to E
Pipe Size
Nominal
O.D.
mm
mm
Inches
Inches
200
219.1
8
8.625
250
273.0
10
10.750
300
323.9
12
12.750
350
355.6
14
14.000
400
406.4
16
16.000
450
457.2
18
18.000
500
508.0
20
20.000
600
609.6
24
24.000
1200
1219.2
48
48.000
E-E
mm
Inches
Approx.
Weight
kg
Lbs.
152
6
203
8
203
8
203
8.00
203
8.00
203
8.00
203
8.00
203
8.00
203
8.00
20.4
44.9
30.5
67.1
44.6
98.1
54.0
118.8
66.8
147.0
65.0
143.0
77.0
169.4
130.4
286.9
364.0
800.8
www.grinnell.com
PREPARATION
EQUIPMENT
221
PREPARATION EQUIPMENT
Preparation Equipment Table of Contents
Hole Cutting
Tools
Page 224
Figure Groover 01
Portable Groover
Pages 223
Pipe Tape
Page 225
Figure Groover 02
Automatic Groover
Pages 223
Figure PUNCH
Hole Punch
Page 225
Figure GAUGE
Groove Gauge
Page 226
Roll Grooving
Specifications
Pages 227 228
OD
Figure STAND
Pipestand
Page 223
Cut Grooving
Specifications
Pages 229 - 230
OD C
Figure RJ624
Pipestand
Page 223
OD
Large Diameter
Roll Groove
Specifications
Page 231
Figure HCTOOL
Hole Cutting Tool
Page 224
Preparation
Equipment
OD
General notes: Additional information is included in our data sheets and is available upon request. It is the Designers responsibility to select
products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always
read and understand the installation constructions. Never remove any piping components nor correct or modify any piping
deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the
gasket recommendation listing for the specific application.
222
www.grinnell.com
PREPARATION EQUIPMENT
Pipe Preparation Tools
Figure GROOVER 01
Part
Number
GROOVER 01
GROOVER 02
GROOVER 10A
GROO10A-UK
Figure GROOVER 02
Nominal Size
mm
In.
42.4mm thru 457.2mm
1 14 thru 18
42.4mm thru 457.2mm
1 14 thru 18
33.7mm thru 219.1mm
1 thru 8
33.7mm thru 219.1mm
1 thru 8
Power
Supply*
Description
380VAC 50Hz
380VAC 50Hz
220VAC 50Hz
110VAC 50Hz
Approx.
Weight
kg
Lbs
207
456.4
297
654.8
107
235.9
107
235.9
Pipe Stands
Preparation
Equipment
Figure RJ-624
Figure STAND
Part
Number
Description
STAND
RJ-624
Size
Range
mm
In.
Approx.
Weight
kg
Lbs
15
33.1
40
88.2
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a
GRINNELL Sales Representative.
223
PREPARATION EQUIPMENT
Figure HCTOOL
Hole Cutting Tool
Figure HCTOOL
(Drill not included)
Pipe
Size
mm
In.
21.0-273.0
1
2-10
Part
Number
HCTOOL
Max. Hole
Supply
mm
In.
125
5
Description
Approx
Weight
Kg
8.0
17.6
Note: The HCT Hole Cutting Tool is a great help when drilling holes in pipe. Almost any standard hole saw machine [i.e. electric drill] can be
mounted on the HCT. With the HCT the hole saw can be fixed, secured and used as a leveling tool to ensure accurate hole alignment.
For pipes of 12mm thru 250mm ( 1 2"thru 12" ). With the optional base and beam adapter, the support can also be attached to standard
steel beams.
Contact a GRINNELL Sales Representative for missing part numbers and ordering information.
HOLESAW22
Figure HOLESAW
(Available sizes
show in table)
HOLESAW24
HOLESAW25
HOLESAW35
HOLESAW38
Preparation
Equipment
Figure HOLESAWCP
(For dia. 14.3mm
thru 30.2mm)
(0.56" thru 1.19")
Figure HOLESAWCP5
(For dia. 31.8mm
thru 152.4mm)
(1.25" thru 6.00")
HOLESAW44
HOLESAW50
HOLESAW63
HOLESAW70
HOLESAW89
Figure HOLESAWDP
(Drive plate for
dia. 76.2mm
thru 152.4mm)
(3.00" thru 6.00")
224
Figure HOLESAWCD
(Spare drill for
HOLESAWCP &
HOLESAWCP5)
HOLESAW114
D
mm
In.
22.2
0.87
23.8
0.94
25.4
1.00
34.9
1.37
38.1
1.50
44.5
1.75
50.8
2.00
63.5
2.50
69.9
2.75
88.9
3.50
114.3
4.50
Use with
Hole Drill
Use with
Drive Plate
HOLESAWCP
HOLESAWCP
HOLESAWCP
HOLESAWCP5
HOLESAWCP5
HOLESAWCP5
HOLESAWCP5
HOLESAWCP5
HOLESAWCP5
HOLESAWCP5
HOLESAWDP
HOLESAWCP5
HOLESAWDP
www.grinnell.com
PREPARATION EQUIPMENT
GRINNELL Groove Measurement Tapes
This dimensional measurement tape has been developed
to check the groove diameter (C-size) of grooved pipe
from 33.7mm up to 609.6mm (1 up to 24).
The loop extending from the metal housing consist of a
clear-view plastic window with an indicator line and a
metal measuring tape. Through the window one can see
the various markings (groove tolerance areas) on the tape.
First, verify which size pipe is to be checked. As shown on
the drawing, the metal tape will show the diameter of a
particular steel pipe size. Slide the loop over the grooved
end of the pipe and place the tape in the groove.
Please note: Check whether the tape is placed in the
groove over the entire circumference of the pipe!
Pull the tape tightly on the pipe. Through the clear view
window one should see the indicator line and a small
block showing the tolerance area for the groove. The
indicator line in the window must fall within the dark
coloured block or groove tolerance area.
If the indicator line is not within the groove tolerance area,
first check if the tape is pulled back tightly, and whether
the tape is correctly placed in the groove. If the tape is
placed properly, this particular groove is not correct.
Make sure that the settings on the GRINNELL grooving tool
are corrected to obtain the correct groove dimensions.
Please note:
This tape is not a calibrated tool and is to be used for
reference only. To ensure accuracy, always check grooved
end pipe with calibrated gauges or calibers.
For Roll Groove Standard Specifications for Steel Pipe and
Other IPS Pipe, refer to Data Sheet G710.
Pipe Size
mm
In.
33.7 323.9
1 12
33.7 609.6
1 24
Part
Number
GRINTAPE
ZKLM024
Description
Hole Drill
Use with
Drive Plate
0.100
0.100
For instructions on part numbers, ordering information, and availability, refer to page 15 or
contact a GRINNELL Sales Representative.
Part
Number
PUNCH
Figure PUNCH
Centre Punch
Preparation
Equipment
225
PREPARATION EQUIPMENT
GRINNELL Gauges
This dimensional gauge is developed to check the A
dimension (gasket seat) and B dimension (groove width)
of grooved pipe.
8-12 1-6
A-Dim OK
A-Dim
Not OK
8-12 1-6
Dimension A
B-Dim Not OK
1-1.5 2-6 8-12
Part
Number
GAUGE
Pipe Size
mm
In.
33.7 323.9
1 12
Description
Hole Drill
Use with
Drive
Plate
Gauge
0.250
Preparation
Equipment
226
www.grinnell.com
PREPARATION EQUIPMENT
Roll Groove Standard Specification
for Steel & Other IPS Pipe
(Page 1 of 2)
Tech Data Sheet: G710
OD
D
Pipe O.D.
mm
Inches
Tolerance
Nominal
Pipe
Size
mm
Inches
O.D.
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
108.0mm
100
4
125
133.0mm
125
139.7mm
125
5
150
159.0mm
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
108.0
4.252
114.3
4.500
133.0
5.236
139.7
5.500
141.3
5.563
159.0
6.260
A
0,76mm
0.030"
mm
Inches
0.41
0.016
0.48
0.019
0.61
0.024
0.74
0.029
0.76
0.030
0.89
0.035
1.09
0.043
1.14
0.045
1.35
0.053
1.42
0.056
1.42
0.056
1.60
0.063
0.41
0.016
0.48
0.019
0.61
0.024
0.74
0.029
0.76
0.030
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
C
Groove Diameter
mm
Inches
B
0,76mm
0.030"
mm
Inches
Actual
Tol. +0.000
7.14
0.281
7.14
0.281
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
8.74
0.344
38.99
1.535
45.09
1.775
57.15
2.250
69.09
2.720
72.26
2.845
84.94
3.344
103.73
4.084
110.08
4.334
129.13
5.084
135.48
5.334
137.03
5.395
154.53
6.084
-0.38
-0.015
-0.38
-0.015
-0.38
-0.015
-0.46
-0.018
-0.46
-0.018
-0.46
-0.018
-0.51
-0.020
-0.51
-0.020
-0.56
-0.022
-0.56
-0.022
-0.56
-0.022
-0.76
-0.030
D
Groove
Depth
(ref. only)
mm
Inches
1.60
0.062
1.60
0.062
1.60
0.062
1.98
0.078
1.93
0.076
1.98
0.078
2.11
0.083
2.11
0.083
2.11
0.083
2.11
0.083
2.13
0.084
2.11
0.083
T
Minimum
Wall
mm
Inches
Maximum
Allow Flare
Diameter
mm
Inches
1.65
0.065
1.65
0.065
1.65
0.065
2.11
0.083
2.11
0.083
2.11
0.083
2.11
0.083
2.11
0.083
2.77
0.109
2.77
0.109
2.77
0.109
2.77
0.109
44.96
1.77
51.05
2.01
62.99
2.48
75.69
2.98
78.74
3.10
91.44
3.60
110.49
4.35
116.84
4.60
135.89
5.35
142.24
5.60
143.76
5.66
161.29
6.35
Preparation
Equipment
227
PREPARATION EQUIPMENT
Roll Groove Standard Specification
for Steel & Other IPS Pipe
(Page 2 of 2)
Tech Data Sheet: G710
OD
Preparation
Equipment
228
Pipe O.D.
mm
Inches
Tolerance
Nominal
Pipe
Size
mm
Inches
O.D.
150
165.1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
A
0,76mm
0.030"
mm
Inches
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
15.88
0.625
15.88
0.625
19.05
0.750
19.05
0.750
19.05
0.750
23.83
0.938
23.83
0.938
25.40
1.000
25.40
1.000
25.40
1.000
C
Groove Diameter
mm
Inches
B
0,76mm
0.030"
mm
Inches
Actual
Tol. +0.000
8.74
0.344
8.74
0.344
11.91
0.469
11.91
0.469
11.91
0.469
11.91
0.469
11.91
0.469
11.91
0.469
11.91
0.469
12.70
0.500
160.78
6.330
163.96
6.455
214.40
8.441
268.27
10.562
318.19
12.531
350.04
13.781
400.84
157.81
451.64
17.781
502.44
19.781
600.86
23.656
-0.56
-0.022
-0.56
-0.022
-0.64
-0.025
-0.69
-0.027
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
D
Groove
Depth
(ref. only)
mm
Inches
2.16
0.085
2.16
0.085
2.34
0.092
2.39
0.094
2.77
0.109
2.77
0.109
2.77
0.109
2.77
0.109
2.77
0.109
4.37
0.172
T
Minimum
Wall
mm
Inches
Maximum
Allow Flare
Diameter
mm
Inches
2.77
0.109
2.77
0.109
2.77
0.109
3.40
0.134
3.96
0.156
3.96
0.156
4.19
0.165
4.19
0.165
4.78
0.188
5.54
0.218
167.64
6.60
170.94
6.73
223.52
8.80
277.37
10.92
328.17
12.92
358.14
14.10
408.94
16.10
461.26
18.16
512.06
20.16
614.68
24.20
www.grinnell.com
PREPARATION EQUIPMENT
Cut Groove Standard Specification
for Steel & Other IPS Pipe
(Page 1 of 2)
Tech Data Sheet: G710
A
OD C
Pipe O.D.
mm
Inches
A
0,76mm
0.030"
mm
Inches
B
0,76mm
0.030"
mm
Inches
15.88
7.95
Actual
38.99
Tol. +0.000
-0.38
D
Groove
Depth
(ref. only)
mm
Inches
1.60
0.016
0.625
0.313
1.535
-0.015
0.062
0.140
0.48
0.019
0.61
0.024
0.74
0.029
0.76
0.030
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
7.95
0.313
7.95
0.313
7.95
0.313
7.95
0.313
7.95
0.313
9.53
0.375
9.53
0.375
9.53
0.375
9.53
0.375
45.09
1.775
57.15
2.250
69.09
2.720
72.26
2.845
84.94
3.344
103.73
4.084
110.08
4.334
129.13
5.084
135.48
5.334
-0.38
-0.015
-0.38
-0.015
-0.46
-0.018
-0.46
-0.018
-0.46
-0.018
-0.51
-0.020
-0.51
-0.020
-0.51
-0.020
-0.51
-0.020
1.60
0.062
1.60
0.062
1.98
0.078
1.93
0.076
1.98
0.078
2.11
0.083
2.11
0.083
2.11
0.083
2.11
0.083
3.68
0.145
3.91
0.154
4.78
0.188
4.78
0.188
4.78
0.188
5.16
0.203
5.16
0.203
5.16
0.203
5.16
0.203
Nominal
Pipe
Size
mm
Inches
O.D.
32
42.4
+
0.41
0.41
1 1 4
1.660
0.016
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
108.0mm
100
4
125
133.0mm
125
139.7mm
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
108.0
4.252
114.3
4.500
133.0
5.236
139.7
5.500
0.48
0.019
0.61
0.024
0.74
0.029
0.76
0.030
0.89
0.035
1.07
0.042
1.14
0.045
1.35
0.052
1.42
0.056
Tolerance
C
Groove Diameter
mm
Inches
T
Minimum
Wall
mm
Inches
3.56
Preparation
Equipment
229
PREPARATION EQUIPMENT
Cut Groove Standard Specification
for Steel & Other IPS Pipe
(Page 2 of 2)
Tech Data Sheet: G710
A
OD C
Preparation
Equipment
Pipe O.D.
mm
Inches
Nominal
Pipe
Size
mm
Inches
O.D.
125
5
150
159.0mm
150
165.1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
141.3
5.563
159.0
6.260
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Tolerance
+
1.42
0.056
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
1.60
0.063
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
0.79
0.031
A
0,76mm
0.030"
mm
Inches
B
0,76mm
0.030"
mm
Inches
15.88
0.625
15.88
0.625
15.88
0.625
15.88
0.625
19.05
0.750
19.05
0.750
19.05
0.750
23.83
0.938
23.83
0.938
25.40
1.000
25.40
1.000
25.40
1.000
9.53
0.375
9.53
0.375
9.53
0.375
9.53
0.375
11.13
0.438
12.70
0.500
12.70
0.500
12.70
0.500
12.70
0.500
12.70
0.500
12.70
0.500
14.27
0.562
C
Groove Diameter
mm
Inches
Actual
137.03
5.395
154.53
6.084
160.78
6.330
163.96
6.455
214.40
8.441
268.27
10.562
318.19
12.531
350.04
13.781
400.84
157.81
451.64
17.781
502.44
19.781
600.86
23.656
Tol. +0.000
-0.56
-0.022
-0.56
-0.022
-0.56
-0.022
-0.56
-0.022
-0.64
-0.025
-0.69
-0.027
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
-0.76
-0.030
D
Groove
Depth
(ref. only)
mm
Inches
2.13
0.084
2.11
0.083
2.16
0.085
2.16
0.085
2.34
0.092
2.39
0.094
2.77
0.109
2.77
0.109
2.77
0.109
2.77
0.109
2.77
0.109
4.37
0.172
T
Minimum
Wall
mm
Inches
5.16
0.203
5.56
0.219
5.56
0.219
5.56
0.219
6.05
0.238
6.35
0.250
7.09
0.279
7.14
0.281
7.92
0.312
7.92
0.312
7.92
0.312
9.53
0.375
230
www.grinnell.com
PREPARATION EQUIPMENT
Standard Roll Groove for
Large Diameter IPS Pipe
B
A
OD
mm
Inches
mm
Inches
A
0.03mm
0.8"
mm
Inches
+2.36
-0.093
+2.36
-0.093
+2.36
-0.093
+2.36
-0.093
+2.36
-0.093
+2.36
-0.093
+2.36
-0.093
-0.79
-0.031
-0.79
-0.031
-0.79
-0.031
-0.79
-0.031
-0.79
-0.031
-0.79
-0.031
-0.79
-0.031
44.5
1.75
44.5
1.75
44.5
1.75
44.5
1.75
44.5
1.75
44.5
1.75
50.8
2.00
Tolerance
Nominal
Size
mm
Inches
O.D.
mm
Inches
650
26
700
28
750
30
800
32
900
36
1000
40
1050
42
660.4
26.0
711.2
28.0
762.0
30.0
812.8
32.0
914.4
36.0
1016.0
40.0
1066.8
42.0
B
C
0.03mm +0, -0.063mm
0.8"
+0, -1.6"
mm
mm
Inches
Inches
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
647.7
25.5
698.5
27.5
749.3
29.5
800.1
31.5
901.7
35.5
1003.3
39.5
1054.1
41.5
D
Nominal
Groove
Depth
mm
Inches
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
6.4
0.25
T
Min. Allow
Wall Thickness
Roll
Grooved
mm
Inches
Cut
Grooved
mm
Inches
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
9.5
0.375
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
15.9
0.625
Max
Allowed
Flare Dia.
mm
Inches
665.5
26.2
716.3
28.2
767.1
30.2
817.9
32.2
919.5
36.2
1026.2
40.4
1071.9
42.2
Preparation
Equipment
231
PREPARATION EQUIPMENT
End Protection (EP) Cut-Groove Specification
OD
This chart should only be used with End Protection (EP) Piping components (pages 32, 170 thru 174)
Nominal
Size
mm
Inches
Basic
mm
Inches
50
2
65
2 1 2
80
3
100
4
150
6
200
8
250
10
300
12
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
Pipe O. D.
Tolerance
mm
mm
Inches
Inches
+0.61
-0.61
+0.024
-0.024
+0.74
-0.74
+0.029
-0.29
+0.89
-0.79
+0.035
-0.031
+1.14
-0.79
+0.045
-0.031
+1.60
-0.79
+0.063
-0.031
+1.60
-0.79
+0.063
-0.031
+1.60
-0.79
+0.063
-0.031
+1.60
-0.79
+0.063
-0.031
Gasket Seat A
Basic
mm
Inches
14.27
0.562
14.27
0.562
14.27
0.562
15.37
0.605
15.37
0.605
18.14
0.714
18.14
0.714
18.14
0.714
Groove Width B
Tol.
Basic
mm
Inches
0.25
0.010
0.25
0.010
0.25
0.010
0.38
0.015
0.38
0.015
0.38
0.015
0.38
0.015
0.38
0.015
6.48
0.255
6.48
0.255
6.48
0.255
7.75
0.305
7.75
0.305
10.16
0.400
10.16
0.400
10.16
0.400
Groove Dia. C
Tol.
+0.25/+0.010
Basic
mm
Inches
Tol.
+0/+0
-0.13
-0.005
-0.13
-0.005
-0.13
-0.005
-0.13
-0.005
-0.13
-0.005
-0.25
-0.010
-0.25
-0.010
-0.25
-0.010
57.15
2.250
69.09
27.20
84.94
3.344
110.08
4.334
163.96
6.455
214.4
8.441
268.28
10.562
318.29
12.531
-0.38
-0.015
-0.46
-0.018
-0.46
-0.018
-0.51
-0.020
-0.56
-0.022
-0.64
-0.025
-0.69
-0.027
-0.76
-0.030
Groove
Depth
d
(ref.)
1.60
0.063
1.98
0.078
1.98
0.078
2.11
0.083
2.16
0.085
2.34
0.092
2.39
0.094
2.77
0.109
Preparation
Equipment
232
www.grinnell.com
GASKETS
233
GASKETS
GRINNELL Gasket Seal
Tech Data Sheet: G610
Pressure responsive gaskets are offered in a variety of
types. Although they each serve a specific function they all
utilize the same sealing design.
The GRINNELL gasket is designed to provide a three-way
sealing action.
(1) Installation of the gasket over the outside sealing
surface of the pipe compresses the lip seal and forms
the initial seal.
First Seal
C-shaped rubber gasket seals
on pipe ends.
Second Seal
The housings compress the
gasket to increase the sealing
capacity.
Third Seal
The system pressure or vacuum will
then maximize the leak-tight seal.
Gaskets
234
www.grinnell.com
GASKETS
GRINNELL Gasket Styles
Tech Data Sheet: G610
Standard
The standard style gasket, with a C shape configuration, is the most commonly
used. It is provided as the standard gasket in the Figure 705, 707, 770, 772,
780, 405, and 472 GRINNELL Couplings. The gasket is available in Grade
E and EN EPDM, Grade T Nitrile, Grade L Silicone, and Grade O
Fluoroelastomer.
Tri-Seal
The tri-seal gasket is designed to close off the gap or gasket cavity. This is
accomplished by positioning the centre rib of the gasket over the gap between
the pipes. The tri-seal gasket has two tapered sealing edges in addition to the
centre rib for additional strength and sealing.
The Tri-Seal gasket can be used with the Figure 705, 707, 770, 772, 405, and
472 GRINNELL Couplings. It is recommended for use in low temperature and
vacuum services (greater than 10" Hg (250mm Hg)) applications and potable water
systems. Note only a petroleum-free silicone based lubricant is recommended for low
temperature applications. The gasket is available in Grade E, EN EPDM, and
Grade T Nitrile.
Note: Rigid couplings are recommended for vacuum and low temperature applications.
Centre-Stop, Push-On
The Grade EHT EPDM Centre-Stop, Push-On Style Gasket is specially designed
for easy installation of the GRINNELL Figure 740 Pivot-Bolt Coupling.
Reducing Coupling
The reducing gasket is provided with ribs used to position the larger pipe so
that the sealing lip is located on the sealing surface of the pipe. This gasket is
used only with the Figure 716 GRINNELL Reducing Coupling and is available in
Grade E EPDM and Grade T Nitrile.
Reducing couplings are not recommended for low temperature
applications.
Flange Adapter
This gasket is specifically designed for use with the Figure 71 Flange Adapter.
The gasket has an optimum amount of rubber to provide a dependable seal
between both the pipe and mating surface. The gasket is available in Grade E
EPDM and Grade T Nitrile.
Outlet Fittings
The gasket provides a compression type seal, which is designed to conform
to the exterior curve (OD) of the pipe. This design is unique to the Figure 730
Mechanical Tee (threaded and grooved). The gasket is available in Grade E
EPDM and Grade T Nitrile.
Note: When used in low temperature applications, use a petroleum-free silicone based lubricant,
otherwise no lubricant is required on Mechanical Tee and Strap gaskets.
Outlet Coupling
This gasket is specifically designed for use with the GRINNELL Figure 702 Outlet
Coupling.
Gaskets
This gasket is designed for use with the Figure 909 Plain End Coupling.
GRINNELL gaskets are designed exclusively for use with GRINNELL manufactured coupling housings. The mixing of other
manufacturers gaskets or housings with GRINNELL gaskets or housings may result in pipe joint leakage or failure and will
void the GRINNELL Mechanical Products Limited Warranty.
GRINNELL Gaskets should only be used on GRINNELL Couplings.
For Shurjoint replacement gaskets, please contact your local Sales Representative.
235
GASKETS
GRINNELL Gasket Grade & Recommendations
Tech Data Sheet: G610
Technical and Engineering Services should be consulted if
combinations of service solutions are being considered.
Email: info-NL@tyco-bspd.com
Phone: +31 (0)53 428 4444
Fax: +31 (0)53 428 3377
Temperature
Range
-34C to 110C
(-30F to 230F)
E
Tri- Seal
-34C to 110C
(-30F to 230F)
EN and
EN Tri-Seal
for IPS Pipe
Potable Water
up to 82C (180F)
EHT
Centre-Stop
Push-On Style
For closed-loop
heating systems
-34C to 120C
(-30F to 250F )
Potable Water up to
82C (180F)
Compound
Colour
Code
General
Service Application
Green Stripe
Hot water, dilute acids, alkalies, oil free air, and many
chemical services not involving petroleum products.
Excellent oxidation resistance.
Not for use with hydrocarbons.
Not recommended for steam service.
EPDM
Green Stripe
EPDM
Green/Yellow
Stripe
EPDM
Green and
Red
Striped
EPDM
T and
T Tri- Seal
-29C to 82C
(-20F to 180F)
Nitrile
O and
O Tri- Seal
-7C to 149C
(+20F to 300F)
Fluoroelastomer
Blue Stripe
-34C to 177C
(-30F to 350F)
Silicone *
Red Stripe
* To prevent gasket from deteriorating, NEVER use silicone-based lubricants with Grade L Silicone gaskets.
For local country potable water approvals contact a GRINNELL Sales Representative.
236
www.grinnell.com
GASKETS
GRINNELL Gasket Air, Water & Chemical Recommendations
(Page 1 of 3)
Tech Data Sheet: G610
U
>V>,
->i,iii>iv>
engineering evaluation and recommendation where the
gasket grade is shown in parenthesis.
U
iV}>iVV`iLiVi>iVi`i`
for the service intended.
U 1iiii`]>}>i}>iL>i`>
temperature of 21C (70F).
U -iVv}>i}>`ii`i}
U >Vii>ii]ii>}>i
For low temperature applications, use a petroleum-free
silicone lubricant.
U >i>`i
/V>Lii`ii
>i`
Water & Air
->i
U 7iii>i}>i]iivii`}>i
grade is listed first.
Petroleum Products
Service
Gasket
Grade
E
T
E
Chemical
Composition
U iVii`]V>V>,
Representative for recommendation.
Gasket
Grade
Chemical
Composition
E/T
E
E
E
E
Service
Gasket
Grade
Gasket
Grade
Chemical
Composition
T
T
T
T
T
T
T
T
T
Gasket
Grade
Chemical
Composition
ASTM #3 Oil
Ammonium Fluoride
Barium Sulde
Calcium Hydroxide
Acetaldehyde
Ammonium Hydroxide
Benzaldehyde
Calcium Hypochlorite
Acetamide
Ammonium
Metaphosphate
Benzene
Calcium Hypochloride
Ammonium Nitrate
Ammonium Nitrite
Acetic Anhydride
Acetone
Acetonitrile
E
T
Acetylene
E/T
Adipic Acid
Alkalis
Allyl Alcohol to 96%
Alum Sulfuric Acid
Alums
E
E
O
E/T
Ammonium Persulfate,
to 10%
E/T
E
E
Calcium Nitrate
E/T
Calcium Sulfate
E/T
Calcium Sulde
E/T
Benzoic Acid
Benzol
Caliche Liquors
Benzyl Alcohol
Carbitol
Gasket
Grade
T
E/T
Ammonium Phosphate
Benzyl Benzoate
Ammonium Sulfamate
Carbon Bisulde
Ammonium Sulfate
E/T
E/T
Ammonium Sulde
Bleach,12% Active
E/T
Ammonium
Thiocyanate
Borax Solutions
Carbon Disulde
Bordeaux Mixture
Carbon Monoxide
Amyl Acetate
Amyl Alcohol
Amyl
Chloronaphthalene
Boric Acid
E/T
Carbon Tetrachloride
Bromine
Caustic Potash
Butane Gas
Cellosolve Acetate
Butanol
(see Butyl Alcohol)
Cellosolve
(Alcohol Ether)
Cellulose Acetate
E
E
E/T
E/T
Anderol
E/T
Aniline
Aniline Dyes
Butyl Acetate
Ricinoleate
Aniline Hydrochloride
Butyl Alcohol
E/T
Cellulube 220
(Tri-Aryl-Phosphate)
Aniline Oil
Aluminum Phosphate
Antimony Chloride
Butyl
Cellosolve Adipate
E/T
Cellulube Hydraulic
Fluids
Aluminum Salts
Antimony Trichloride
Butyl Phenol
Butyl Stearate
Butylene
Aluminum Chloride
Aluminum Fluoride
Aluminum Hydroxide
Aluminum Nitrate
Aluminum Oxychloride
Aluminum Sulfate
Ammonia Gas, Cold
E
E/T
E/T
Argon Gas
E/O
Aroclor(S)
E/T
Ammonia, Liquid
Butylene Glycol
Ammonium Biuoride
Barium Carbonate
Calcium Acetate
Ammonium Carbonate
Barium Chloride
E/T
Calcium Bisulphite
Barium Hydroxide
E/T
Calcium Chloride
Ammonium Chloride
E/T
E/T
Chlorine, Dry
Chlorinated Parafn
(Chlorocosane)
Gaskets
237
GASKETS
GRINNELL Gasket Air, Water & Chemical Recommendations
(Page 2 of 3)
Tech Data Sheet: G610
Chemical
Composition
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Hydrobromic Acid, to
40%
Chloroacetic Acid
Ethyl Cellusolve
Chloroacetone
Ethyl Chloride
Chlorobenzene
Ethyl Ether
Chloroform
Ethyl Oxalate
Chemical
Composition
Mercuric Chloride
Gasket
Grade
E/T
Mercuric Cyanide
Mercurous Nitrate
E/T
Hydrochloric Acid, to
36%, 24C (75F )
Hydrochloric Acid, to
36%, 70C (158F )
Mercury
Methane
T
E/T
Ethyl Silicate
Ethylene Chlorohydrin
Hydrocyanic Acid
Ethylene Diamine
Methyl Chloride
E/T
Ethylene Dichloride
(Dichloroethane)
Hydrouoric Acid, to
75%, 24C (75F )
Methyl Alcohol,
Methanol
T/O
Ethylene Glycol
E/T
E/T
Copper Chloride
E/T
Methyl Isobutyl
Carbinol
Copper Cyanide
E/T
Methylene Chloride
Copper Fluoride
Ferric Chloride,
Saturated
Hydrogen Peroxide,
to 50%
Ferric Hydroxide
Methylene Dichloride
38C (100F )
Ferric Sulfate
Hydrogen Peroxide,
to 90%
MIL-L7808
Chrome Alum
Chrome Plating
Solutions
Citric Acid
Copper Nitrate
E/T
Copper Sulfate
E/T
Hydrouosilicic Acid
Fire Fighting
Foam Concentrate
E/O
Fluboric Acid
E/T
Creosote, Wood
Fly Ash
Cupric Fluoride
FM200 HFC-227ea
Cupric Sulfate
Fog Oil
Hydrogen Sulde
Hydroquinone
Hydroxylamine Sulfate
Hypochlorous Acid,
Dilute
MIL-05606
MIL-08515
Mineral Oils
Napthenic Acid
Natural Gas
Nevoil
Formaldehyde
E/T
Iso Octane,
38C (100F )
Formamide
E/T
Isobutyl Alcohol
Nickel Chloride
E/T
Formic Acid
Isopropyl Acetate
Isopropyl Alcohol
E/T
Isopropyl Ether
Nickel Sulfate
E/T
JP-3
JP-4
E/T
JP-5, 6, 7, 8
Dicyclohexylamine
Freon 134a,
80C (176F )
Diesel Oil
Kerosene
Fructose
E/T
Diethyl Ether
Ketones
Fuel Oil
Fumaric Acid
Diethyl Sebacate
Nitromethane
Diethylamine
Furfuryl Alcohol
Lauric Acid
Nitrous Oxide
E/T
Gasoline, Rened
Lavender Oil
Lead Acetate
NOVEC 1230
FK-5-1-12
Ogisogiric Acid, to
75%, 66C (150F )
Oil, Motor
Oleic Acid
Orthodichlorobenzene
OS-45 Silicate
Ester Fluid
O
O
Cyclohexane
(Alicyclic Hydrocarbon)
Cyclohexanone
Deionized Water
Dextrim
Dibutyl Phthalate
Dichloro Dioro
Methane
Diethylene Glycol
Digester Gas
Dimethylamine
Gasoline, Rened,
Unleaded
Lead Chloride
Dioctyl Phthalate
Glue
E/T
Lead Sulfate
Dioxane
Glycerin
E/T
Dipentene
(Terpene-Hydrocarbon)
Gaskets
Gasket
Grade
Glycerol
Glycol
E/T
E/T
Linoleic Acid
Lithium Bromide
E/T
O
T
Dipropylene Glycol
Glycolic Acid
Lithium Chloride
Dowtherm A
Grease
Dowtherm E
T
T
Dowtherm SR-1
T/E
Halon 1301
Heptane
Lubricating Oil, to
66C (150F )
Ethanolamine
Hexaldehyde
Magnesium Chloride
E/T
OS-45-1
Ethyl Acetoacetate
Hexane
Magnesium Hydroxide
E/T
Oxalic Acid
Ethyl Acrylate
Hexanol Tertiary
Magnesium Sulfate
E/T
Oxygen, Cold
Ethyl Alcohol
Hexyl Alcohol
Maleic Acid
Ozone
Ethyl Cellulose
Hexylene Glycol
Malic Acid
Palmitic Acid
Ethane
238
www.grinnell.com
GASKETS
GRINNELL Gasket Air, Water & Chemical Recommendations
(Page 3 of 3)
Tech Data Sheet: G610
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Pentane
Propanol
Sodium Perborate
Tetrachloroethylene
Perchloroethylene
Propargyl Alcohol
Sodium Peroxide
Thionyl Chloride
Propyl Alcohol
Sodium Phosphate,
Dibasic
Terpineol
Titanium Tetrachloride
Sodium Phosphate,
Monobasic
Toluene, 30%
Transmission Fluid,
Type A
Petroleum Ether
(see Benzene)
Propylene Dichloride
Petroleum Oils
Propylene Glycol
Pyranol 1467
Phenylhydrazine
Pyranol 1476
Phenylhydrazine
Hydrochloride
Sodium Phosphate,
Tribasic
Pyroguard C
Sodium Silicate
Phosphate Ester
Phosphoric Acid, to
75% and 21C (70F )
E/T
Triacetin
Trichloroethane
O
O
Pyroguard D
Sodium Sulfate
E/T
Pyroguard 55
Sodium Sulde
Pyrrole
Trichloroethylene, to
93C (200F )
Tricresyl Phosphate
Sodium Sulte
Solution, to 20%
Phosphoric Acid, to
85% and 93C (200F )
Rosin Oil
Sodium Thiosulfate,
Hypo
Photographic Solutions
Trisodium Phosphate
Phthalic Anhydride
Salicylic Acid
Sohovis 47
Tung Oil
Sohovis 78
Solvasol #1
Solvasol #2
Turpentine
Urea
Polybutene
Polyvinyl Acetate, Solid
(In Liquid State is
50% solution of
Methanol or 60%
solution of H2O)
Potassium Alum
Secondary Butyl
Alcohol
Sewage
Silver Nitrate
Silver Sulfate
E/T
Potassium Bicarbonate
E/T
Potassium Bichromate
E/T
T
E/T
E
E
Spindle Oil
Stannic Chloride
Soap Solutions
E/T
Stannous Chloride, to
15%
Soda Ash,
Sodium Carbonate
E/T
Potassium Bromate
Potassium Bromide
E/T
Sodium Acetate
Potassium Carbonate
E/T
Sodium Alum
T
E
Potassium Chlorate
Sodium Benzoate
Potassium Chloride
Sodium Bicarbonate
E/T
Potassium Chromate
Sodium Bisulfate
E/T
E/T
Potassium Dichromate
Sodium Bisulte
(Black Liquor)
E/T
Potassium Ferricyanide
Sodium Bromide
E/T
Potassium
Ferrocyanide
Sodium Carbonate
E/T
Sodium Chlorate
Potassium Fluoride
Sodium Chloride
E/T
Potassium Hydroxide
Sodium Cyanide
E/T
Potassium Perborate
Potassium Perchlorate
Potassium
Permanganate,
Saturated to 10%
Potassium
Permaganate
Saturate 10-25%
Potassium Persulfate
Stearic Acid
Stoddard Solvent
Water, Chlorine
Water, Deionized
Sulfonic Acid
Water, Potable
Water, Seawater
Sulfur
Water, Waste
E/T
Sulfur Chloride
White Liquor
Styrene
Xylene
Zinc Nitrate
Zinc Sulfate
E/T
E/T
Sodium Fluoride
E/T
Sulfurous Acid
Tall Oil
Tanning Liquors
(50g. alum. solution,
50g. dichromate
solution)
Potassium Sulfate
Sodium
Metaphosphate
Prestone
Sodium Nitrate
T*
Sodium Nitrite
E/T
Wood Oil
Sodium Ferrocyanide
EN
E/T
E/T
E
E/T
Sodium Hypochlorite,
to 20%
Starch
E/T
Vi-Pex
Sodium Ferricyanide
Sodium Hydroxide to
50%
Vinyl Acetate
Vegetable Oils
E/T
E/T
E/T
Sodium Dichromate,
to 20%
Potassium Silicate
Propane Gas
Skydrol 500
Phosphate Ester
Potassium Nitrate
Solvasol #73
Potassium Borate
Potassium Cyanide
Solvasol #3
Triethanolamine
Tartaric Acid
Tertiary Butyl Alcohol
Tetrabutyl Titanate
E
E/T
E
Note:
Contact GRINNELL for an
Engineering evaluation and
recommendation where the
gasket grade is shown in
parenthesis. For dry pipe systems
or freezer systems, use Tri-Seal
freezer gasket and petroleum
free silicone lubricant. Check
gasket colour code to be certain
it is recommended for the service
intended. Unless otherwise noted,
all gasket listings are based upon
a temperature of 21C (70F).
For services not listed contact
GRINNELL for recommendation.
Where more than one gasket
is shown, the preferred gasket
grade is listed first.
Gaskets
239
GASKETS
GRINNELL Gasket Lubricants
Tech Data Sheet: G610
During installation of a GRINNELL Coupling, always
lubricate the gasket. For couplings using the tri-seal gasket
in a low temperature application, use a
petroleum-free silicone based lubricant.
For mechanical tees and straps when
used in low temperature applications,
use a petroleum-free silicone based
lubricant, otherwise no lubricant is
required.
Approx.
Weight
kg
Lbs.
0.5
1.1
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.2
Part
Number
Traditional
Lubricant
70006E
English Label
70008E
English Label
70009E
German Label
70010E
French Label
70011E
Dutch Label
70013E
Spanish Label
70015E
Swedish Label
Part
Number
GETL
(GRINNELL Extreme
Temperature
Lubricant)
Approx.
Weight
kg
Lbs.
English Label
0.5
1.1
8000B
Part
Number
Lubricant
for Potable Water
VR69-252
With KTW
Certificate
Application
Traditional
Lubricant
Fire Protection
Chilled Water
Approx.
Weight
kg
Lbs.
1.0
2.2
GETL
(GRINNELL
Quick Dry
Extreme
Lubricant
Temperature
Lubricant)
Heating
Gaskets
Compressed Air
Drainage
Sewage
Process < 66C (150F )
Process > 66C (150F )
240
Part
Number
Quick Dry
Lubricant
70006B
English Label
70008B
English Label
70009B
German Label
70010B
French Label
70011B
Dutch Label
70013B
Spanish Label
70015B
Swedish Label
Approx.
Weight
kg
Lbs.
0.5
1.1
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.2
Traditional
Lubricant
GETL
Quick Dry (GRINNELL Extreme
Lubricant
Temperature
Lubricant)
650
650
1000
570
570
1000
440
440
1000
300
300
700
220
220
500
135
135
300
110
110
250
85
85
200
65
65
160
55
55
140
50
50
120
38
38
90
33
33
80
20
20
50
www.grinnell.com
GASKETS
GRINNELL Replacement Gaskets for
Figure 740, 705, 774, 707, 770 and 772
(Page 1 of 2)
->`>`
-i>i
Pipe Size
EPDM
Nitrile
Nominal
O.D.
EPDM
Grade E
Grade E
Grade EHT
Grade T
Grade T
Grade T
mm
mm
Grade EN*
C-Style
Tri-Seal
Push-On Style
C-Style
Tri-Seal
Push-On Style
Inches
Inches
C-Style
25
33.7
10EPDM
10EPDM-PW 10BUNA
1
1.315
32
42.4
12EPDM
12EPDM-TRI
12EPDM-PW 12BUNA
1.660
1 1 4
40
48.3
15EPDM
15EPDM-TRI
15EPDM-PW 15BUNA
1 1 2
1.900
50
60.3
20EPDM
20EPDM-TRI 74020EPDME 20EPDM-PW 20BUNA
74020NITRILS
2
2.375
65
73.0
25EPDM
25EPDM-TRI 74025EPDME 25EPDM-PW 25BUNA
74025NITRILS
2 1 2
2.875
65
76.1
26EPDM
26EPDM-TRI
26EPDM-PW 26BUNA
76.1mm
3.000
80
88.9
30EPDM
30EPDM-TRI 74030EPDME 30EPDM-PW 30BUNA
74030NITRILS
3
3.500
100
108.0
41EPDM
41BUNA
108.0mm
4.252
100
114.3
42EPDM
42EPDM-TRI 74040EPDME 42EPDM-PW 42BUNA
74040NITRILS
4
4.500
125
133.0
51EPDM
51BUNA
133.0mm
5.236
125
139.7
52EPDM
52EPDM-TRI
52EPDM-PW 52BUNA
139.7mm
5.500
125
141.3
52EPDM
52EPDM-TRI 74050EPDME 52EPDM-PW 52BUNA
74050NITRILS
5
5.563
150
159.0
61EPDM
61BUNA
159.0mm
6.260
150
165.1
62EPDM
62EPDM-TRI
62EPDM-PW 62BUNA
165.1mm
6.500
150
168.3
63EPDM
63EPDM-TRI 74060EPDME 63EPDM-PW 63BUNA
74060NITRILS
6
6.625
200
219.1
80EPDM
80EPDM-TRI 74080EPDME 80EPDM-PW 80BUNA
74080NITRILS
8
8.625
250
273.0
11EPDM
11EPDM-TRI
11EPDM-PW 11BUNA
10
10.750
300
323.9
13EPDM
13EPDM-TRI
13EPDM-PW 13BUNA
12
12.750
350
355.6
14EPDM
14BUNA
14
14.000
400
406.4
16EPDM
16BUNA
16
16.000
450
457.2
18EPDM
18BUNA
18
18.000
500
508.0
21EPDM
21BUNA
20
20.000
600
609.6
24EPDM
24BUNA
24
24.000
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
Gaskets
241
GASKETS
GRINNELL Replacement Gaskets for
Figure 740, 705, 774, 707, 770 and 772
(Page 2 of 2)
->`>`
-i>i
Gaskets
Pipe Size
Fluoro Elastomer
Silicone
Nominal
O.D.
Grade O
Grade O
Grade L
mm
mm
C-Style
Tri-Seal
C-Style
Inches
Inches
25
33.7
10VITON
10SILICONE
1
1.315
32
42.4
12VITON
12SILICONE
1 1 4
1.660
40
48.3
15VITON
15SILICONE
1 1 2
1.900
50
60.3
20VITON
20SILICONE
2
2.375
65
73.0
25VITON
25SILICONE
2 1 2
2.875
65
76.1
26VITON
26SILICONE
76.1mm
3.000
80
88.9
30VITON
30SILICONE
3
3.500
100
108.0
108.0mm
4.252
100
114.3
42VITON
42SILICONE
4
4.500
125
133.0
133.0mm
5.236
125
139.7
52VITON
52SILICONE
139.7mm
5.500
125
141.3
52VITON
52SILICONE
5
5.563
150
159.0
159.0mm
6.260
150
165.1
62VITON
62SILICONE
165.1mm
6.500
150
168.3
63VITON
63SILICONE
6
6.625
200
219.1
80VITON
80SILICONE
8
8.625
250
273.0
11VITON
11SILICONE
10
10.750
300
323.9
13VITON
13SILICONE
12
12.750
350
355.6
14VITON
14SILICONE
14
14.000
400
406.4
16VITON
16SILICONE
16
16.000
450
457.2
18VITON
18
18.000
500
508.0
21VITON
20
20.000
600
609.6
24VITON
24
24.000
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a
GRINNELL Sales Representative.
GRINNELL Gaskets should only be used on GRINNELL Couplings.
For Shurjoint replacement gaskets, please contact your local Sales Representative.
242
www.grinnell.com
GASKETS
GRINNELL Replacement Gaskets for
Figure 71, 780, & 909
Figure 71 Gaskets
Pipe Size
Figure 71
Flange Adapter
Figure 780
Snap Coupling
Figure 909
Plain End Coupling
Nominal
O.D.
EPDM
Nitrile
EPDM
Nitrile
EPDM
Nitrile
mm
mm
Grade E
Grade T
Grade E
Grade T
Grade E
Grade T
Inches
Inches
25
33.7
1
1.315
32
42.4
1 1 4
1.660
40
48.3
15EPDM780
15BUNA780
1.900
1 1 2
50
60.3
20EPDM71
20BUNA71
20EPDM780
20BUNA780
20EPDM909
20BUNA909
2
2.375
65
73.0
25EPDM71
25BUNA71
25EPDM780
25BUNA780
25EPDM909
25BUNA909
2 1 2
2.875
65
76.1
26EPDM71
26BUNA71
26EPDM780
26BUNA780
76.1mm
3.000
100
108.0
30EPDM71
30BUNA71
30EPDM780
30BUNA780
30EPDM909
30BUNA909
108.0mm
4.252
100
114.3
4
4.500
125
133.0
42EPDM71
42BUNA71
42EPDM780
42BUNA780
42EPDM909
42BUNA909
133.0mm
5.236
125
139.7
139.7mm
5.500
125
141.3
52EPDM71
52BUNA71
52EPDM780
52BUNA780
5
5.563
150
159.0
52EPDM71
52BUNA71
53EPDM780
53BUNA780
159.0mm
6.260
150
165.1
165.1mm
6.500
150
168.3
62EPDM71
62BUNA71
62EPDM780
62BUNA780
6
6.625
200
219.1
63EPDM71
63BUNA71
63EPDM780
63BUNA780
63EPDM909
63BUNA909
8
8.625
250
273.0
80EPDM71
80BUNA71
80EPDM780
80BUNA780
80EPDM909
80BUNA909
10
10.750
300
323.9
11EPDM71
11BUNA71
11EPDM909
11BUNA909
12
12.750
350
355.6
13EPDM71
13BUNA71
14
14.000
400
406.4
16
16.000
450
457.2
18
18.000
500
508.0
20
20.000
600
609.6
24
24.000
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.
Gaskets
243
GASKETS
GRINNELL Replacement Gaskets for
Figure 716
Reducing Coupling
The reducing gasket is provided with ribs used to position the
larger pipe so that the sealing lip is located on the sealing
surface of the pipe. This gasket is used only with the Figure
716 GRINNELL Reducing Coupling and is available in Grade
E EPDM and Grade T Nitrile.
Pipe Size
Nominal
mm
Inches
50 x 40
2 x 1 1 2
65 x 50
2 1 2 x 2
65 x 50
76.1 x 2
80 x 50
3x2
80 x 65
3 x 2 1 2
80 x 65
3 x 76.1mm
100 x 60
4x2
100 x 65
4 x 2 1 2
100 x 65
114.3 x 76.1mm
100 x 80
4x3
125 x 100
139.7mm x 4
125 x 100
5x4
150 x 100
165mm x 4
150 x 100
6x4
150 x 125
6x5
200 x 150
8x6
Gaskets
O.D.
mm
Inches
60.3 x 48.3
2.375 x 1.900
73.0 x 60.3
2.875 x 2.375
76.1 x 60.3
3.000 x 2.375
88.9 x 60.3
3.500 x 2.375
88.9 x 73.0
3.500 x 2.875
88.9 x 76.1
3.500 x 3.000
114.3 x 60.3
4.500 x 2.375
114.3 x 73.0
4.500 x 2.875
114.3 x 76.1
4.500 x 3.000
114.3 x 88.9
4.500 x 3.500
139.7 x 114.3
5.500 x 4.500
141.3 x 114.3
5.563 x 4.500
165.1 x 114.3
6.500 x 4.500
168.3 x 114.3
6.625 x 4.500
168.3 x 141.3
6.625 x 5.563
219.1 x 168.3
8.625 x 6.625
EPDM Grade E
716-Style
Nitrile Grade T
716-Style
EPDM2015
BUNA2015
EPDM2520
BUNA2520
EPDM2620
BUNA2620
EPDM3020
BUNA3020
EPDM3025
BUNA3025
EPDM3026
BUNA3026
EPDM4220
BUNA4220
EPDM4225
BUNA4225
EPDM4226
BUNA4226
EPDM4230
BUNA4230
EPDM5242
BUNA5242
EPDM5342
BUNA5342
EPDM6242
BUNA6242
EPDM6342
BUNA6342
EPDM6553
BUNA6553
EPDM8063
BUNA8063
For instructions on part numbers, ordering information, and availability, refer to page
15 or contact a GRINNELL Sales Representative.
244
www.grinnell.com
GASKETS
GRINNELL Replacement Gaskets for
Figure 730
Outlet Fittings
The gasket provides a compression type seal, which is designed to conform
to the exterior curve (OD) of the pipe. This design is unique to the Figure 730
Mechanical Tee (threaded and grooved).
Note: When used in low temperature applications, use a petroleum-free silicone based lubricant,
otherwise no lubricant is required on Mechanical Tee gaskets.
Outlet Size
Run Size
Run Size
mm
Inches
Outlet Size
mm
Inches
15. 20. 25
1
2, 3 4 , 1
32
1 1 4
40
1 1 2
40
1 1 2
32
1 1 4
32
1 1 4
50
2
50
2
65
2 1 2
65
2 1 2
80
3
80
3
100
4
EPDM
Grade E
730-Style
Nitrile
Grade T
730-Style
1EPDM730
1BUNA730
2EPDM730
2BUNA730
2EPDM730
2BUNA730
3EPDM730
3BUNA730
3EPDM730
3BUNA730
3EPDM730
3BUNA730
3EPDM730
3BUNA730
4EPDM730
4BUNA730
5EPDM730
5BUNA730
6EPDM730
6BUNA730
7EPDM730
7BUNA730
8EPDM730
8BUNA730
9EPDM730
9BUNA730
Gaskets
For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales
Representative.
245
GASKETS
Gaskets
246
www.grinnell.com
PRESSURE &
DESIGN DATA
247
Rigid Joints
GRINNELL Rigid Couplings provide rigid gripping of the pipe. They are
designed to bring the pipe ends close together and to ensure the coupling
clamps firmly onto the pipe OD and the bottom of the grooves. Because rigid
couplings clamp around the entire pipe surface, they provide resistance to
flexural and torsional loads and therefore permit longer spacing to ASME/
ANSI B 31.1 (Power Piping) and ASME/ANSI B 39.1 (Building Services)
requirements.
Flexible Joints
GRINNELL Flexible Couplings act as an expansion joint, allowing linear
and angular movement of the pipe. They are designed with the coupling keys
engaging the pipe without gripping on the bottom of the grooves, while still
providing for a restrained mechanical joint. This is particularly useful to allow for
pipe expansion/contraction and piping misalignment.
Angular Deflection
GRINNELL Flexible Couplings are
capable of accommodating angular
deflection.
End Gap
42.4 88.9
1 1 4 3
114.3 610.0
4 24
50%
25%
Cut
Grooved
mm
Inches
Roll
Grooved
mm
Inches
42.4 88.9
1 1 4 3
114.3 610.0
4 24
0 1.6
0 0.063
0 2.4
0 0.188
0 0.8
0 0.031
0 2.4
0 0.094
Expansion/Contraction
GRINNELL Flexible Couplings are capable of
accommodating pipe thermal movements
provided they are properly gapped and a
sufficient quantity of flexible couplings are
used. Note that flexible couplings will not
accommodate both full maximum linear
movement and the maximum available
angular deflection concurrently at the
same joint.
Pressure &
Design Data
248
Deflection
Pipe Size
mm
Inches
42.4 88.9
1 1 4 3
114.3 610.0
4 24
Maximum Pipe
Deflection
Reduction
50%
25%
www.grinnell.com
Activation Force
Anchor
Position
Expansion
Joint Fig. 7550
Intermediate
Guides
Pipe Size
mm
Inches
Activation Force
N
Lbs.
42.4
1 1 4
48.3
1 1 2
60.3
2
73.0
2 1 2
76.1
76,1mm
88.9
3
114.3
4
141.3
5
165.1
165,1mm
168.3
6
219.1
8
273.0
10
323.9
12
156
35
200
45
311
70
645
100
489
110
645
145
1068
240
1668
375
2224
500
2313
520
3914
880
6072
1365
8518
1915
(3) Design the system with flexible couplings utilizing the expansion/contraction
capabilities of these products.
Pressure &
Design Data
Intermediate
Guides
249
U1ix}iV}viV>V
(b) Fully gapped apart for expansion only. Therefore the
number of Figure 707 Flexible Couplings required:
U{x{iV}r{n
(1.36" / 0.094" per coupling = 14.47)
Pressure &
Design Data
U1ix}iiLi
}vi
expansion
250
Thermal Expansion
mm/30.5m
Inches/100 Feet
-7.72
-0.30
-5.79
-0.23
-3.86
-0.15
-1.93
-0.08
0.00
0.00
1.93
0.08
3.86
0.15
5.79
0.23
7.72
0.30
9.65
0.38
11.58
0.46
13.51
0.53
15.44
0.61
17.37
0.68
19.30
0.76
21.23
0.84
23.16
0.91
25.09
0.99
27.02
1.06
28.95
1.14
30.88
1.22
32.81
1.29
34.74
1.37
36.67
1.44
38.60
1.52
40.53
1.60
42.46
1.67
44.39
1.75
www.grinnell.com
Deflection O
(Roll Grooved Pipe)
Pipe Size
mm
Inches
42.4
1 1 4
48.3
1 1 2
60.3
2
73.0
2 1 2
76.1
76,1mm
88.9
3
114.3
4
R =
2
L = (2) (R)
N=
141.3
5
165.1
165,1mm
168.3
6
219.1
8
273.0
10
323.9
12
Figures
705 &
707
1.08
0.94
0.75
0.62
0.60
0.51
1.19
0.97
0.83
0.81
0.63
0.50
0.42
R = Radius of curve
L = Pipe length
= Deflection from centre line, in degrees,
for each coupling (see table)
N = Number of flexible couplings needed
Pressure &
Design Data
251
Flexible Joints
Rigid Joints
10
3.3
12
3.7
15
4.6
22
6.7
25
7.6
30
9.1
35
40
10.7 12.2
Maximum Distance
Between Supports
Meters
Feet
42.4 - 48.3
1 1 4 - 1 1 2
60.3 - 219.1
2-8
3.7
12
4.6
15
273.0 - 323.9
4.9
10 - 12
16
355.6 - 406.4
14 - 16
457.2 - 609.6
18 - 24
5.5
18
6.1
20
Pressure &
Design Data
Nominal
DN
In.
O.D.
mm
In.
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
4
125
133.0mm
125
139.7mm
125
5
150
165.1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
33.4
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
114.3
4.500
133.0
5.236
139.7
5.500
141.3
5.563
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Water Service
Air Service
II
III
II
III
2.1
7
2.1
7
2.1
7
3.0
10
3.4
11
3.4
11
3.7
12
4.3
14
4.9
16
4.6
15
4.9
16
5.2
17
5.2
17
5.8
19
5.8
19
7
23
7
23
8.2
27
8.2
27
9.1
30
9.8
32
2.7
9
3.4
11
3.7
12
4.0
13
4.3
14
4.3
14
4.6
15
5.2
17
5.8
19
5.5
18
5.8
19
6.1
20
6.1
20
6.4
21
6.4
21
6.4
21
6.4
21
6.4
21
6.4
21
6.4
21
6.4
21
3.7
12
3.7
12
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
2.7
9
2.7
9
2.7
9
4.0
13
4.3
14
4.3
14
4.6
15
5.2
17
6.1
20
5.2
19
6.1
20
6.4
21
6.4
21
7.3
24
7.3
24
9.1
30
9.1
30
10.7
35
10.7
35
11.9
39
12.8
42
9
2.7
11
3.4
13
4.0
15
4.6
16
4.9
16
4.9
17
5.2
21
6.4
24
7.3
23
7
24
7.3
25
7.6
25
7.6
28
8.5
31
9.4
33
10.1
33
10.1
33
10.1
33
10.1
33
10.1
33
10.1
3.7
12
3.7
12
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
4.6
15
252
www.grinnell.com
Rotational Movement
GRINNELL Flexible Couplings are suitable for use in seismic as well as mining applications. The inherent capability of
the flexible coupling to allow for linear movement, angular deflection, and rotational movement make it an excellent
choice for reducing stresses in a piping system and to increase pipe life in slurry applications.
For mining applications where the pipe needs to be rotated, the system should be depressurized. The pipe coupling
bolts/nuts can be loosened, pipe rotated, the bolts/nuts re-tightened, and the system be put back in service.
Even distribution of pipe wear can be achieved with this method on the inner service of the pipe.
Note: Precautions are necessary to monitor pipe wall thickness to evaluate pressure capability of the pipe with reduced wall.
Linear Movement
Flexible couplings are designed with the couplings keys engaging the pipe without gripping on the bottom of the groove
while still providing for a restrained mechanical joint.
The inherent flexibility of the coupling must be considered when deciding on support arrangements for the piping system
as movement can occur in more than one plane (linear movement, angular deflection, and rotational movement).
Upon system pressurization, each pipe end within the
flexible couplings will expand to the maximum published
value. The coupling keys make contact with the face of
the groove and restrain the joint. In piping systems, this
movement will be accumulative.
Pressure &
Design Data
253
Angular Movement
System movement can be accommodated by providing for
sufficient offset lengths. Temperature increases/decreases can
further increase this movement.
When systems are anchored with partially deflected joints,
the system can move to the fully deflected condition upon
pressurization resulting in the snaking of the piping system.
Lightweight hangers may not be suitable to prevent the lateral
motion.
Pipe Support
Pipe hanger positioning is important when considering pipe
sagging due to the flexible nature of the piping system. Proper
positioning of hangers near the elbow, for example, should be
considered.
The use of spring hangers or other methods can be considered to
accommodate vibrations. Base supports, pressure thrust anchors,
and pipe offsets can be used to direct pipe movement.
The use of rigid couplings can be considered to reduce the
movement available with flexible couplings. Consideration of other
methods of accommodation of pipe movements may be required.
Pressure &
Design Data
254
www.grinnell.com
When using flexible couplings, the movement that occurs in long lengths
of piping needs to be considered. Each joint can move up to the maximum
pipe end separation published. This movement can accumulate and result
in the growth of the piping system, for example at the top. Offsets may be
necessary.
Should the riser contain branch connections, the movement which occurs at
these locations with flexible couplings will also need to be considered.
One solution would be to anchor the vertical piping at appropriate
locations to prevent movement which can cause stresses at the branches or
equipment. The use of rigid couplings can be an advantage.
As always, good piping practice should prevail. It is the designers
responsibility to select products suitable for the intended service and to
ensure that pressure ratings and performance data is not exceeded. Never
remove any piping component or correct or modify any piping deficiencies
without first depressurizing and draining the system. Material and gasket
selection should be verified to be compatible for the specific application.
Pressure &
Design Data
255
Conversion Table
Wall Thickness - mm inches
Pipe Size
Pressure &
Design Data
256
Nominal
DN
In.
O.D.
mm
In.
20
3
4
25
1
32
1 1 4
40
1 1 2
50
2
65
2 1 2
65
76.1mm
80
3
100
108.0mm
100
4
125
133.0mm
125
139.7mm
125
5
150
159.0mm
150
165.1mm
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
26.9
1.050
33.4
1.315
42.4
1.660
48.3
1.900
60.3
2.375
73.0
2.875
76.1
3.000
88.9
3.500
108.0
4.252
114.3
4.500
133.0
5.236
139.7
5.500
141.3
5.563
159.0
6.260
165.1
6.500
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
508.0
20.000
609.6
24.000
Sch. 5
Sch. 10
Sch. 20
Sch. 30
Sch. 40
Sch. 80
DIN 2440
DIN 2448
DIN 2458
1.65
0.06
1.65
0.06
1.65
0.06
1.65
0.06
1.65
0.06
2.11
0.08
2.11
0.08
2.11
0.08
2.77
0.11
2.77
0.11
2.77
0.11
3.4
0.13
3.96
0.16
4.19
0.16
2.77
0.11
2.77
0.11
2.77
0.11
2.77
0.11
2.77
0.11
3.05
0.12
3.05
0.12
3.05
0.12
3.4
0.13
3.4
0.13
3.76
0.15
4.19
0.16
4.57
0.18
6.35
0.25
6.35
0.25
6.35
0.25
6.35
0.25
6.35
0.25
6.35
0.25
6.35
0.25
6.35
0.25
7.94
0.31
7.94
0.31
7.94
0.31
9.53
0.38
9.53
0.38
7.04
0.28
7.8
0.31
8.38
0.33
9.53
0.38
9.53
0.38
11.13
0.44
12.7
0.50
14.28
0.56
2.87
0.11
3.38
0.13
3.56
0.14
3.68
0.14
3.91
0.15
5.16
0.20
5.49
0.22
6.02
0.24
6.55
0.26
7.11
0.28
8.18
0.32
9.27
0.36
10.31
0.41
11.1
0.44
12.7
0.50
14.28
0.56
15.06
0.59
17.45
0.69
3.91
0.15
4.55
0.18
4.83
0.19
5.08
0.20
5.54
0.22
7.01
0.28
7.61
0.30
8.56
0.34
9.53
0.38
10.97
0.43
12.7
0.50
15.06
0.59
17.45
0.69
19.05
0.75
21.41
0.84
23.8
0.94
26.19
1.03
30.94
1.22
2.65
0.10
3.25
0.13
3.25
0.13
3.25
0.13
3.65
0.14
3.65
0.14
4.05
0.16
4.5
0.18
4.85
0.19
4.85
0.19
2.3
0.09
2.6
0.10
2.6
0.10
2.6
0.10
2.9
0.11
2.9
0.11
3.2
0.13
3.6
0.14
3.6
0.14
4
0.16
4.5
0.18
4.5
0.18
6.3
0.25
6.3
0.25
7.1
0.28
8
0.31
8.8
0.35
10
0.39
11
0.43
12.5
0.49
2
0.08
2
0.08
2.3
0.09
2.3
0.09
2.6
0.10
2.6
0.10
2.9
0.11
2.9
0.11
3.2
0.13
3.6
0.14
4
0.16
4
0.16
4.5
0.18
4.5
0.18
5
0.20
5.6
0.22
5.6
0.22
6.3
0.25
6.3
0.25
6.3
0.25
6.3
0.25
www.grinnell.com
Pipe Size
mm
Inches
O.D.
25
1
33.7
1.315
32
1 1 4
42.4
1.660
40
1 1 2
48.3
1.900
50
2
60.3
2.375
65
2 1 2
73.0
2.875
65
76.1mm
76.1
3.000
80
3
88.9
3.500
100
108.0mm
108.0
4.252
Nominal
Wall
Thickness
mm Inches
Fig. 705
Flexible
1.8
0.071
2.9
0.114
3.2
0.126
1.8
0.071
2.9
0.114
3.6
0.142
1.8
0.071
2.9
0.114
3.6
0.142
1.8
0.071
2.9
0.114
3.6
0.142
2.0
0.079
3.2
0.126
5.0
0.197
2.0
0.079
3.2
0.126
5.0
0.197
2.0
0.079
3.2
0.126
5.6
0.220
2.0
0.079
3.2
0.126
5.6
0.220
20.7
300
34.5
500
34.5
500
20.7
300
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
27.6
400
34.5
500
34.5
500
41.4
600
51.7
750
41.4
600
51.7
750
41.4
600
51.7
750
51.7
750
51.7
750
51.7
750
34.5
500
51.7
750
51.7
750
34.5
500
51.7
750
51.7
750
34.5
500
41.3
51.7
750
34.5
500
41.3
599
51.7
750
34.5
500
41.3
599
51.7
750
34.5
500
51.7
750
69.0
1001
34.5
500
41.3
599
69.0
1001
34.5
500
41.3
599
69.0
1001
20.7
300
34.5
500
34.5
500
20.7
300
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
24.1
350
24.1
350
34.5
500
24.1
350
24.1
350
34.5
500
24.1
350
24.1
350
34.5
500
24.1
350
24.1
350
34.5
500
Fig. 71
Flange
13.8
200
17.2
249
20.7
300
13.8
200
17.2
249
20.7
300
13.8
200
17.2
249
20.7
300
13.8
200
17.2
249
20.7
300
Pressure &
Design Data
257
Pipe Size
mm
Inches
Pressure &
Design Data
258
O.D.
100
4
114.3
4.500
125
133.0mm
133.0
5.236
125
139.7mm
139.7
5.500
125
5
141.3
5.563
150
159.0mm
159.0
6.260
150
165.1mm
165.1
6.500
150
6
168.3
6.625
200
8
219.1
8.625
Nominal
Wall
Thickness
mm Inches
2.0
0.079
3.2
0.126
5.6
0.220
2.9
0.114
3.6
0.142
6.3
0.248
2.9
0.114
3.6
0.142
6.3
0.248
2.9
0.114
3.6
0.142
6.3
0.248
2.9
0.114
3.6
0.142
7.1
0.280
2.9
0.114
3.6
0.142
7.1
0.280
2.9
0.114
3.6
0.142
7.1
0.280
2.9
0.114
5.0
0.197
8.0
0.315
Fig. 705
Flexible
27.6
400
34.5
500
34.5
300
24.1
300
31.0
300
31.0
300
24.1
300
31.0
300
31.0
300
24.1
300
31.0
300
31.0
300
24.1
300
31.0
300
31.0
300
24.1
300
31.0
300
31.0
300
24.1
300
31.0
300
31.0
300
17.2
300
20.7
300
31.0
300
27.6
27.6
27.6
24.1
400
400
400
400
350
41.3
34.5
41.3
41.3
34.5
24.1
599
500
599
599
500
350
69.0
51.7
51.7
69.0
34.5
34.5
300
300
300
300
300
300
24.1
24.1
24.1
300
300
300
34.5
31.0
31.0
300
300
300
69.0
51.7
31.0
300
300
300
24.1
24.1
24.1
24.1
300
300
300
300
34.5
34.5
31.0
31.0
24.1
300
300
300
300
300
69.0
51.7
51.7
31.0
34.5
300
300
300
300
300
24.1
24.1
24.1
24.1
300
300
300
300
31.0
34.5
31.0
24.1
300
300
300
300
69.0
48.2
31.0
27.6
300
300
300
300
24.1
24.1
24.1
24.1
24.1
300
300
300
300
300
31.0
34.5
34.5
34.5
31.0
24.1
300
300
300
300
300
300
69.0
48.3
48.2
69.0
31.0
27.6
300
300
300
300
300
300
17.2
17.2
17.2
17.2
13.8
300
300
300
300
300
20.7
20.7
20.7
20.7
20.7
20.7
300
300
300
300
300
300
55.1
41.4
41.3
55.1
31.0
27.6
300
300
300
300
300
300
Fig. 71
Flange
13.8
200
17.2
249
20.7
300
13.8
300
17.2
300
20.7
300
13.8
300
17.2
300
20.7
300
13.8
300
17.2
300
20.7
300
13.8
300
17.2
300
20.7
300
13.8
300
13.8
300
20.7
300
www.grinnell.com
Pipe Size
mm
Inches
O.D.
250
10
273.0
10.750
300
12
323.9
12.750
350
14
355.6
14.000
400
16
406.4
16.000
450
18
457.2
18.000
500
20
508.0
20.000
600
24
609.6
24.000
Nominal
Wall
Thickness
mm Inches
3.6
0.142
5.0
0.197
8.0
0.315
4.0
0.157
5.0
0.197
8.0
0.315
4.0
0.157
6.3
0.248
8.8
0.346
9.5
0.374
4.0
0.157
6.3
0.248
8.8
0.346
9.5
0.374
5.0
0.197
6.3
0.248
8.8
0.346
5.0
0.197
6.3
0.248
8.8
0.346
5.0
0.197
6.3
0.248
8.8
0.346
Fig. 705
Flexible
20.7
300
24.1
300
24.1
300
13.8
300
20.7
300
24.1
300
17.2
17.2
20.7
300
300
300
300
20.7
20.7
20.7
24.1
300
300
300
300
34.5
27.6
55.1
24.1
300
300
300
300
13.8
13.8
13.8
13.8
300
300
300
300
20.7
13.8
13.8
20.7
300
300
300
300
34.5
27.6
55.1
24.1
300
300
300
300
8.6
8.6
300
300
17.2
24.1
300
300
20.7
24.1
300
300
24.1
24.1
300
300
6.9
6.9
300
300
20.7
24.1
300
300
20.7
24.1
300
300
24.1
24.1
300
300
6.9
24.1
300
300
15.5
24.1
300
300
20.7
24.1
300
300
3.4
3.4
300
300
6.9
13.8
300
300
20.7
24.1
300
300
1.7
1.7
300
300
5.2
13.8
300
300
17.2
24.1
300
300
Fig. 71
Flange
13.8
300
13.8
300
17.2
300
13.8
300
13.8
300
17.2
300
8.6
300
13.8
300
13.8
300
20.7
300
6.9
300
13.8
300
13.8
300
20.7
300
13.8
300
13.8
300
20.7
300
3.4
300
6.9
300
20.7
300
1.7
300
6.9
300
17.2
300
Pressure &
Design Data
259
Pipe Size
mm
Inches
O.D.
25
1
33.7
1.315
32
1 1 4
42.4
1.660
40
1 1 2
48.3
1.900
50
2
60.3
2.375
65
2 1 2
73.0
2.875
80
3
88.9
3.500
100
4
114.3
4.500
125
5
141.3
5.563
150
6
168.3
6.625
200
8
219.1
8.625
Pipe
Schedule
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
Nominal
Wall
Thickness
mm Inches
1.7
0.065
2.8
0.109
1.7
0.065
2.8
0.109
1.7
0.065
2.8
0.109
1.7
0.065
2.8
0.109
2.1
0.083
3.0
0.12
2.1
0.083
3.0
0.12
2.1
0.083
3.0
0.12
2.8
0.109
3.4
0.134
2.8
0.109
3.4
0.134
2.8
0.109
3.8
0.148
Fig. 705
Flexible
20.7
300
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
34.5
500
27.6
400
34.5
500
24.1
350
31.0
450
24.1
350
31.0
450
17.2
250
20.7
300
300
20.7
300
20.7
51.7
300
750
20.7
51.7
300
750
20.7
34.5
34.5
24.1
300
500
500
350
20.7
51.7
51.7
24.1
300
750
750
350
20.7
34.5
34.5
24.1
300
500
500
350
20.7
51.7
51.7
24.1
300
750
750
350
20.7
34.5
34.5
24.1
300
500
500
350
20.7
41.4
41.4
24.1
300
600
600
350
20.7
34.5
34.5
24.1
300
500
500
350
20.7
41.4
41.4
24.1
300
600
600
350
20.7
27.6
27.6
24.1
300
400
400
350
20.7
41.4
41.4
24.1
300
600
600
350
20.7
24.1
24.1
24.1
300
350
350
350
20.7
34.5
31.0
24.1
300
500
450
350
20.7
24.1
24.1
300
350
350
20.7
31.0
34.5
300
450
500
17.2
17.2
17.2
250
250
250
20.7
20.7
20.7
300
300
300
Fig. 71
Flange
13.8
200
17.2
250
13.8
200
17.2
250
13.8
200
17.2
250
13.8
200
17.2
250
13.8
200
17.2
250
13.8
200
17.2
250
13.8
200
13.8
200
Pressure &
Design Data
260
www.grinnell.com
Pipe Size
mm
Inches
O.D.
250
10
273.0
10.750
300
12
323.9
12.750
Pipe
Schedule
5
10
5
10
5
350
14
355.6
14.000
10
20
5
400
16
406.4
16.000
10
20
450
18
457.2
18.000
500
20
508.0
20.000
600
24
609.6
24.000
10
20
10
20 (Std.)
10
20 (Std.)
Nominal
Wall
Thickness
mm Inches
3.4
0.134
4.2
0.165
4.0
0.156
4.6
0.18
4.0
0.156
6.4
0.25
7.9
0.312
4.2
0.165
6.4
0.25
7.9
0.312
6.4
0.25
7.9
0.312
6.4
0.25
9.5
0.375
6.4
0.25
9.5
0.375
Fig. 705
Flexible
20.7
300
24.1
350
20.7
300
24.1
350
17.2
17.2
250
250
20.7
20.7
300
300
13.8
13.8
200
200
20.7
13.8
300
200
8.6
125
17.2
250
19.0
275
6.9
100
12.1
175
19.0
275
6.9
100
12.1
175
6.9
100
20.7
300
5.2
75
17.2
250
Fig. 71
Flange
13.8
200
13.8
200
13.8
200
13.8
200
Pressure &
Design Data
261
Pipe Size
Nominal
DN
In.
O.D.
mm
In.
Wall
Pipe
Thickness
Schedule
mm
In.
5
25
1
33.7
1.315
10
40
5
32
1 1 4
42.4
1.660
10
40
5
40
1 1 2
48.3
1.900
10
40
5
50
2
60.3
2.375
10
40
5
65
2 1 2
73.0
2.875
10
40
5
80
3
88.9
3.500
10
40
5
100
4
114.3
4.500
10
40
1.7
0.065
2.8
0.109
3.4
0.133
1.7
0.065
2.8
0.109
3.6
0.140
1.7
0.065
2.8
0.109
3.7
0.145
1.7
0.065
2.8
0.109
3.9
0.154
2.1
0.083
3.0
0.120
5.2
0.203
2.1
0.083
3.0
0.120
5.5
0.216
2.1
0.083
3.0
0.120
6.0
0.237
Figure
774
Figure
707
Figure
772
Figure
405
Figure
472
Figure
770
Figure
71
24.1
350
34.5
500
51.7
750
22.4
325
34.5
500
51.7
750
22.4
325
34.5
500
44.8
650
17.2
250
34.5
500
34.5
500
17.2
250
34.5
500
34.5
500
17.2
250
27.6
400
34.5
500
13.8
200
27.6
400
34.5
500
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
20.7
300
17.2
250
20.7
300
20.7
300
17.2
250
20.7
300
20.7
300
17.2
250
20.7
300
20.7
300
13.8
200
20.7
300
20.7
300
27.6
400
34.5
500
51.7
750
27.6
400
34.5
500
51.7
750
27.6
400
34.5
500
51.7
750
22.4
325
34.5
500
51.7
750
22.4
325
34.5
500
51.7
750
22.4
325
34.5
500
51.7
750
17.2
250
34.5
500
51.7
750
27.6
400
51.7
750
51.7
750
27.6
400
51.7
750
51.7
750
24.1
350
48.3
700
51.7
750
24.1
350
48.3
700
51.7
750
24.1
350
34.5
500
51.7
750
20.7
300
34.5
500
51.7
750
24.1
350
34.5
500
51.7
750
24.1
350
34.5
500
51.7
750
24.1
350
34.5
500
51.7
750
24.1
350
34.5
500
34.5
500
24.1
350
34.5
500
34.5
500
24.1
350
34.5
500
34.5
500
20.7
300
27.6
400
34.5
500
24.1
350
34.5
500
51.7
750
24.1
350
34.5
500
51.7
750
24.1
350
34.5
500
41.4
600
24.1
350
34.5
500
41.4
600
24.1
350
34.5
500
41.4
600
20.7
300
27.6
400
41.4
600
24.1
350
51.7
750
51.7
750
24.1
350
51.7
750
51.7
750
24.1
350
51.7
750
51.7
750
20.7
300
51.7
750
51.7
750
12.1
175
19.0
275
19.0
275
12.1
175
19.0
275
19.0
275
12.1
175
19.0
275
19.0
275
12.1
175
19.0
275
19.0
275
Pressure &
Design Data
262
www.grinnell.com
Pipe Size
Nominal
DN
In.
O.D.
mm
In.
Wall
Pipe
Thickness
Schedule
mm
In.
5
125
5
141.3
5.563
10
40
5
150
6
168.3
6.625
10
40
5
200
8
219.1
8.625
10
40
5
250
10
273.0
10.750
10
40
5
300
12
323.9
12.750
10
40
2.8
0.109
3.4
0.134
6.6
0.258
2.8
0.109
3.4
0.134
7.1
0.280
2.8
0.109
3.8
0.148
8.2
0.322
3.4
0.134
4.2
0.165
9.3
0.365
4.0
0.156
4.6
0.180
9.5
0.375
Figure
774
Figure
707
Figure
772
Figure
405
Figure
472
Figure
770
Figure
71
8.6
125
24.1
350
31.0
450
5.2
75
13.8
200
20.7
300
3.4
50
13.8
200
20.7
300
N/R
N/R
5.2
75
5.2
75
N/R
N/R
3.4
50
3.4
50
8.6
125
20.7
300
20.7
300
5.2
75
13.8
200
20.7
300
3.4
50
13.8
200
20.7
300
N/R
N/R
5.2
75
5.2
75
N/R
NR
5.2
75
5.2
75
13.8
200
34.5
500
44.8
650
8.6
125
20.7
300
34.5
500
5.2
75
20.7
300
27.6
400
N/R
N/R
8.6
125
22.4
325
N/R
N/R
8.6
125
17.2
250
17.2
250
34.5
500
44.8
650
17.2
250
20.7
300
31.0
450
6.9
100
20.7
300
31.0
450
N/R
N/R
20.7
300
31.0
450
10.3
150
10.3
150
27.6
400
17.2
250
24.1
350
31.0
450
17.2
250
17.2
250
31.0
450
6.9
100
13.8
200
31.0
450
17.2
250
24.1
350
41.4
600
17.2
250
20.7
300
41.4
600
6.9
100
20.7
300
41.4
600
N/R
N/R
20.7
300
41.4
600
10.3
150
10.3
150
41.4
600
17.2
250
24.1
350
51.7
750
17.2
250
24.1
350
51.7
750
6.9
100
24.1
350
44.8
650
N/R
N/R
20.7
300
41.4
600
20.7
300
17.2
250
41.4
600
8.6
125
13.8
200
17.2
250
5.2
75
8.6
125
10.3
150
3.4
50
5.2
75
8.6
125
N/R
N/R
5.2
75
8.6
125
N/R
N/R
3.4
50
8.6
125
Pressure &
Design Data
263
Pipe Size
Nominal
DN
In.
Pressure &
Design Data
264
O.D.
mm
In.
25
1
33.7
1.315
32
1 1 4
42.4
1.660
40
1 1 2
48.3
1.900
50
2
60.3
2.375
65
2 1 2
73.0
2.875
65
76.1mm
76.1
3.000
80
3
88.9
3.500
100
4
114.3
4.500
Pipe
Thickness
Wall
mm
Figure
705
Figure
774
Figure
707
Figure
772
Figure
405
Figure
472
Figure
770
Figure
71
2.0
0.079
2.8
0.110
3.4
0.134
2.0
0.079
2.8
0.110
3.6
0.142
2.0
0.079
2.8
0.110
3.7
0.146
2.0
0.079
2.8
0.110
3.9
0.154
2.0
0.079
3.0
0.118
5.2
0.205
2.0
0.079
3.0
0.118
5.2
0.205
2.0
0.079
3.0
0.118
5.5
0.217
2.0
0.079
3.0
0.118
6.0
0.236
24
350
34
500
52
750
22
325
34
500
52
750
22
325
34
500
45
650
17
250
34
500
34
500
17
250
34
500
34
500
17
250
28
400
34
500
17
250
28
400
34
500
14
200
28
400
34
500
21
300
21
300
21
300
21
300
21
300
21
300
21
300
21
300
21
300
17
250
21
300
21
300
17
250
21
300
21
300
17
250
21
300
21
300
17
250
21
300
21
300
14
200
21
300
21
300
28
400
34
500
52
750
28
400
34
500
52
750
28
400
34
500
52
750
22
325
34
500
52
750
22
325
34
500
52
750
22
325
34
500
52
750
22
325
34
500
52
750
17
250
34
500
52
750
28
400
52
750
52
750
28
400
52
750
52
750
24
350
48
700
52
750
24
350
48
700
52
750
24
350
34
500
52
750
24
350
34
500
52
750
21
300
34
500
52
750
24
350
34
500
52
750
24
350
34
500
52
750
24
350
34
500
52
750
24
350
34
500
34
500
24
350
34
500
34
500
24
350
34
500
34
500
24
350
34
500
34
500
21
300
28
400
34
500
24
350
34
500
52
750
24
350
34
500
52
750
24
350
34
500
41
600
24
350
34
500
41
600
24
350
34
500
41
600
24
350
34
500
41
600
21
300
28
400
41
600
24
350
52
750
52
750
24
350
52
750
52
750
24
350
52
750
52
750
21
300
52
750
52
750
12
175
19
275
19
275
12
175
19
275
19
275
12
175
19
275
19
275
12
175
19
275
19
275
12
175
19
275
19
275
www.grinnell.com
Pipe Size
Nominal
DN
In.
O.D.
mm
In.
125
139.7mm
139.7
5.500
125
5
141.3
5.563
150
165.1mm
165.1
6.500
150
6
168.3
6.625
200
8
219.1
8.625
250
10
273.0
10.750
300
12
323.9
12.750
Pipe
Thickness
Wall
mm
Figure
705
Figure
774
Figure
707
Figure
772
Figure
405
Figure
472
Figure
770
Figure
71
2.8
0.110
3.4
0.134
6.4
0.252
2.8
0.110
3.4
0.134
6.6
0.260
2.8
0.110
3.4
0.134
7.1
0.280
2.8
0.110
3.4
0.134
7.1
0.280
2.8
0.110
3.8
0.150
8.2
0.323
3.4
0.134
4.2
0.165
9.3
0.366
4.0
0.157
4.6
0.181
9.5
0.374
9
125
24
350
31
450
9
125
24
350
31
450
5
75
14
200
21
300
5
75
14
200
21
300
3
50
14
200
21
300
N/R
N/R
5
75
5
75
N/R
N/R
3
50
3
50
9
125
21
300
21
300
9
125
21
300
21
300
5
75
14
200
21
300
5
75
14
200
21
300
3
50
14
200
21
300
N/R
N/R
5
75
5
75
N/R
N/R
5
75
5
75
14
200
34
500
45
650
14
200
34
500
45
650
9
125
21
300
34
500
9
125
21
300
34
500
5
75
21
300
28
400
N/R
N/R
9
125
22
325
N/R
N/R
9
125
17
250
17
250
34
500
45
650
17
250
34
500
45
650
17
250
21
300
31
450
17
250
21
300
31
450
7
100
21
300
31
450
N/R
N/R
21
300
31
450
10
150
10
150
28
400
17
250
24
350
31
450
17
250
24
350
31
450
17
250
17
250
31
450
17
250
17
250
31
450
7
100
14
200
31
450
17
250
24
350
41
600
17
250
24
350
41
600
17
250
21
300
41
600
17
250
21
300
41
600
7
100
21
300
41
600
N/R
N/R
21
300
41
600
10
150
10
150
41
600
17
250
24
350
52
750
17
250
24
350
52
750
7
100
24
350
45
650
N/R
N/R
21
300
41
600
21
300
17
250
41
600
9
125
14
200
17
250
9
125
14
200
17
250
5
75
9
125
10
150
5
75
9
125
10
150
3
50
5
75
9
125
N/R
N/R
5
75
9
125
NR
3
50
9
125
Pressure &
Design Data
265
266
mm
(Specification
Reference)
DIN
mm
BS
mm
ISO
mm
JIS
mm
21.3mm
26.7mm
33.4mm
42.2mm
48.3mm
60.3mm
73.1mm
76.1mm BS/ISO
DN 15
26.9mm
33.7mm
42.4mm
DN 40
DN 50
76.1mm
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
76.1mm
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
76.1mm
21.7mm
27.2mm
34mm
42.7mm
48.6mm
60.5mm
76.3mm
India
GB
China
mm
IS 1239
IS3589
2
4
1
1 14
1 1 2
2
2 1 2
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
76.1mm **
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
76.1mm
ANSI
Inches
1
2
4
1
1 1 4
1 1 2
2
15
20
25
32
40
50
2 1 2
65
80
88.9mm
DN 80
DN 80
DN 80
DN 80
DN 80
DN 80
3 2
90
100
DIN 133mm
108mm **
127mm
125
152.4mm
150
175
203.2mm
200
254mm
101.6mm
108mm China
(& old DIN)
114.3mm
127mm
133mm China
139.7mm BS/ISO
141.3mm
152.4mm
159mm China
165.1mm JIS/BS
168.3mm
193.7mm
203.2mm
216.3mm JIS
219.1mm
254mm
DN 100
DN 125
DN 150
DN 200
DN 100
139.7mm
165.1mm
DN 200
DN 101
139.7mm
DN 150
DN 200
DN 100
139.8mm
165.2mm
216.3mm
DN 100
133mm **
139.7mm
159mm
DN 150
DN 200
10
250
304.8mm
12
300
14
350
16
400
18
450
20
500
22
550
24
600
Pressure &
Design Data
mm
(Metric)
DN 100
139.7mm
165.1mm
DN 150
193.7mm
DN 200
DN 200
267.4mm JIS
267.4mm
273mm
304.8mm
318.5mm JIS
323.9mm
355.6mm
377mm China
406.4mm
426mm China
457.2mm
480mm China
508mm
530mm China
558.8mm
580mm China
610mm
630mm China
DN 250
DN 300
DN 350
DN 400
DN 450
DN 500
DN 600
DN 250
DN 300
DN 350
DN 400
DN 450
DN 500
DN 600
DN 250
DN 300
DN 350
DN 400
DN 450
DN 500
DN 600
318.5mm
DN 350
DN 400
DN 450
DN 500
DN 550
DN 600
10
12
14
16
18
20
22
24
DN 250
DN 350
377mm
DN 400
426mm
DN 450
480mm
DN 500
530mm
559mm
580mm
DN 600
630mm
DN 250
DN 250
IMPORTANT NOTE:
Nominal designations are used where the actual OD of the pipe matches the ANSI size.
Otherwise both the nominal and actual OD are listed.
China sizes are listed as actual OD in mm.
** China sizes are tubing sizes.
www.grinnell.com
Quantity N
Number of Bolt Holes
ANSI B16.1
(Class 125#) 1
Valve Size
ISO 2084
(PN10) 2
ISO 2084
(PN16) 3
Dimensions - mm Inches
Nominal
mm
Inches
50
2
65
2 1 2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
O.D.
mm
Inches
60.3
2.375
73.0
2.875
88.9
3.500
114.3
4.500
141.3
5.563
168.3
6.625
219.1
8.625
273.0
10.750
323.9
12.750
355.6
14.000
406.4
16.000
457.2
18.000
120.6
4.75
139.7
5.50
152.4
6.00
190.5
7.50
215.9
8.50
241.3
9.50
298.5
11.75
362.0
14.25
431.8
17.00
476.5
18.76
539.8
21.25
577.9
22.75
19.0
0.75
19.0
0.75
19.0
0.75
19.1
0.75
22.4
0.88
22.4
0.88
22.2
0.88
25.4
1.00
25.4
1.00
28.4
1.12
28.4
1.12
31.8
1.25
500
20
600
24
508.0
20.000
609.6
24.000
635.0
25.00
749.3
29.50
31.8
1.25
35.1
1.38
Qty.
N
4
4
4
8
8
8
8
12
12
12
16
16
20
20
125.0
4.92
145.0
5.71
160.0
6.30
180.0
7.09
210.0
8.27
240.0
9.45
295.0
11.61
350.0
13.78
400.0
15.75
460.0
18.11
515.0
20.28
565.0
22.24
18.0
0.71
18.0
0.71
18.0
0.71
18.0
0.71
18.0
0.71
22.0
0.87
22.0
0.87
22.0
0.87
22.0
0.87
22.0
0.87
26.0
1.02
26.0
1.02
620.0
24.41
725.0
28.54
26.0
1.02
30.0
1.18
Qty.
N
4
4
8
8
8
8
8
12
12
16
16
20
20
20
125.0
4.92
145.0
5.71
160.0
6.30
180.0
7.09
210.0
8.27
240.0
9.45
295.0
11.61
355.0
13.98
410.0
16.14
470.0
18.50
525.0
20.67
585.0
23.03
18.0
0.71
18.0
0.71
18.0
0.71
18.0
0.71
18.0
0.71
22.0
0.87
22.0
0.87
26.0
1.02
26.0
1.02
26.0
1.02
30.0
1.18
30.0
1.18
650.0
25.59
770.0
30.31
33.0
1.30
36.0
1.42
Qty.
N
4
4
8
8
8
8
12
12
12
16
16
20
20
20
1 Same drilling as for B16.5 (Class 150#) and B16.42 (Class 250#).
2 Same drilling as for BS 4504 Section 3.2 (PN10) and DIN 2532 (PN10).
3 Same drilling as for BS 4504 Section 3.2 (PN16) and DIN 2532 (PN16).
For additional information, contact a GRINNELL Sales Representative.
Pressure &
Design Data
267
0.03937
3.281
2.205
0.03527
0.145
14.5
0.2248
0.738
(C + 17.78) 1.8
1.341 10-3
0.2642
264.2
Inches
(in)
Feet
(ft)
Pounds
(lb)
Ounces
(oz)
Pressure
(psi)
Pressure
(psi)
End Load
(lb)
Torque
(lbft)
Temp.
(F)
Horsepower
(hp)
Gal. per Min.
(gpm)
10 -3 Gal. per Min.
(gpm)
25.4
0.3048
0.4536
28.35
6.894
0.069
4.45
1.356
(F 32) 1.8
745.7
3.785
3.7865
Pressure &
Design Data
268
www.grinnell.com
Span
Meters
Feet
42.4 - 48.3
1 1 4 - 1 1 2
60.3 - 219.1
2-8
3.7
12
4.6
15
273.0 - 323.9
4.9
10 - 12
16
355.6 - 406.4
14 - 16
457.2 - 609.6
18 - 24
5.5
18
6.1
20
`i - ] `}-iVi
Pipe Code.
Pressure &
Design Data
269
1.1 Materials:
Pressure &
Design Data
270
www.grinnell.com
Same as Section 1.
Same as Section 1.
SECTION 4 - CONDENSER
WATER PIPING
Pressure &
Design Data
271
Pressure &
Design Data
272
www.grinnell.com
INDICES
273
INDICES
Keyword Index
(Page 1 of 4)
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
1
Indices
274
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Cap, Ring Joint, RJ-60 . . . . . . . . . . . . . . . . . . . . . . . . . 220
Caps & Plugs, 72915, G-MINE . . . . . . . . . . . . . . . . . . 190
Caps, Plain End, 960 . . . . . . . . . . . . . . . . . . . . . . . . . 202
CB800 Circuit Balancing Valves Overview & Specs . . . . . 111
Centre Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Centre-Stop, Push-On . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Check Valves, CV-1 . . . . . . . . . . . . . . . . . . . . . . . 107 - 108
Check Valves, Dual Disc, SJ-915 . . . . . . . . . . . . . 109 - 110
Chemical, Air, & Water Gasket Recommendations . . 237 - 239
Circuit Balancing Valves BSP Threaded Ends . . . . . . . . . . 112
Circuit Balancing Valves Flanged Ends, ANSI . . . . . . . . . 115
Circuit Balancing Valves Flanged Ends, PN16/PN10 . . . . 114
Circuit Balancing Valves Grooved Ends . . . . . . . . . . . . . 113
Circuit Balancing Valves Solder Ends . . . . . . . . . . . . . . . 116
Clapper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Concentric Reducer, Ring Joint, RJ-50 . . . . . . . . . . . . . . 219
Concentric Reducers, 250 & 350 . . . . . . . . . . . . . . . 70 - 72
Concentric Reducers, 450, SS . . . . . . . . . . . . . . . . . . . 155
Continuity, Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Conversion Chart, Metric/Imperial . . . . . . . . . . . . . . . . 267
Couplings, (Spline x Solvent Weld), 72905, G-MINE . . . 183
Couplings, 1000 PSI, Ring Joint, RH-1000 . . . . . . . . . . . 213
Couplings, 3770 PSI, Ring Joint, RX-3770 . . . . . . . . . . . 215
Couplings, 72904, G-MINE . . . . . . . . . . . . . . . . . . . . 183
Couplings, 780 Grooved Snap . . . . . . . . . . . . . . . . . . . . 31
Couplings, Extra Heavy Rigid End Protection (EP) XH-70EP 32
Couplings, Flange, IPS & ISO Pipe Sizes, 9094 . . . . . . . 168
Couplings, Flexible Reducing, 716 . . . . . . . . . . . . . . . . . 33
Couplings, Flexible, 405, SS . . . . . . . . . . . . . . . . . . . . 144
Couplings, Flexible, 705 . . . . . . . . . . . . . . . . . . . . . . . . 24
Couplings, Flexible, Heavy Duty, SS-8X . . . . . . . . . . . . . 145
Couplings, Flexible, High Pressure, SS-1200 . . . . . . . . . . 146
Couplings, Flexible, Rilsan Coated 705R . . . . . . . . . . . . 147
Couplings, Flexible, Shouldered, S35 . . . . . . . . . . . . . . 177
Couplings, Galvanised Finish . . . . . . . . . . . . . . . . . . . . . 37
Couplings, Heavy Duty Flexible, 707 . . . . . . . . . . . . 26 - 27
Couplings, High Pressure Rigid, 770 . . . . . . . . . . . . . . . 25
Couplings, Hinged Lever, SS-28, SS . . . . . . . . . . . . . . . 148
Couplings, Installation Information . . . . . . . . . . . . . . . . . . 38
Couplings, IPS & ISO Pipe Sizes, 9095, HDPE . . . . 165 - 166
Couplings, Large Diameter Flexible, 7707N . . . . . . . . . . 29
Couplings, Large Diameter, 707L . . . . . . . . . . . . . . . . . . 28
Couplings, Large Diameter, Ring Joint R-88 . . . . . . . . . . . 212
Couplings, Outlet, 72940, G-MINE . . . . . . . . . . . 184 - 185
Couplings, Outlet, 702 Mechanical . . . . . . . . . . . . . 34 - 35
Couplings, Painted Finish . . . . . . . . . . . . . . . . . . . . . . . . 37
Couplings, Plain End, 909 . . . . . . . . . . . . . . . . . . . . . . . 30
Couplings, Rapid Installation Pivot-Bolt (GRIP) Rigid, 740 . . 22
Couplings, Reducing 72919, G-MINE . . . . . . . . . . . . . . 184
Couplings, Required . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Couplings, Rigid (Large Diameter), SS-7X . . . . . . . . . . . . 143
Couplings, Rigid 772 . . . . . . . . . . . . . . . . . . . . . . . 20 - 21
Couplings, Rigid, 472, SS . . . . . . . . . . . . . . . . . . . . . . 142
Couplings, Rigid, 774 . . . . . . . . . . . . . . . . . . . . . . . . . 23
Couplings, Rigid, Extra Heavy (EP) XH-70EP . . . . . . 32, 171
Couplings, Ring Joint, 3000 PSI, RX-3000 . . . . . . . . . . . 214
Couplings, Ring Joint, R-88 . . . . . . . . . . . . . . . . . 210 - 211
Couplings, Specifications, Stainless Steel Systems . . . . . . 141
Couplings, Toggle, Shouldered, SD-28 . . . . . . . . . . . . . 178
Couplings, Transition IPS & ISO Pipe Sizes, 9097 HDPE . 167
Couplings, Transition, 7706-T . . . . . . . . . . . . . . . . . . . . . 36
Cross, 227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
www.grinnell.com
INDICES
Keyword Index
(Page 2 of 4)
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Indices
275
INDICES
Keyword Index
(Page 3 of 4)
Indices
276
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
www.grinnell.com
INDICES
Keyword Index
(Page 4 of 4)
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Indices
277
INDICES
Part Number Index
(Page 1 of 4)
Indices
210M00076 .....52
210M00089 .....52
210M00108 .....52
210M00114 .....52
210M00133 .....52
210M00139 .....52
210M00141 .....52
210M00159 .....52
210M00165 .....52
210M00168 .....52
210M00219 .....52
210M00273 .....52
210M00324 .....52
211A00042 .....56
211A00048 .....56
211A00060 .....56
211A00073 .....56
211A00089 .....56
211A00114 .....56
211A00141 .....56
211A00168 .....56
211A00219 .....56
211M00076 .....56
211M00139 .....56
211M00165 .....56
212A00042 .....55
212A00048 .....55
212A00060 .....55
212A00073 .....55
212A00089 .....55
212A00114 .....55
212A00141 .....55
212A00168 .....55
212A00219 .....55
212M00076 .....55
212M00139 .....55
219M00034 .....60
219M00042 .....60
219M00048 .....60
219M00060 .....60
219M00073 .....60
219M00076 .....60
219M00089 .....60
219M00108 .....60
219M00114 .....60
219M00133 .....60
219M00139 .....60
219M00141 .....60
219M00159 .....60
219M00165 .....60
219M00168 .....60
219M00219 .....60
219M00273 .....60
219M00324 .....60
219M00355 .....60
219M00406 .....60
221A03015 .....65
221A05325 .....66
221A05330 .....66
221A05342 .....66
221A08042 .....66
221A08063 .....66
221M01142 .....66
221M01163 .....66
221M01180 .....67
221M02015 .....65
221M02520 .....65
221M02615 .....65
221M02620 .....65
221M03010 .....65
221M03020 .....65
221M03025 .....65
221M03026 .....65
221M04220 .....65
221M04225 .....65
221M04226 .....65
221M04230 .....65
221M05230 .....65
221M05242 .....66
221M06230 .....66
221M06242 .....66
221M06320 .....66
221M06325 .....66
221M06326 .....66
221M06330 .....66
221M06342 .....66
221M06352 .....66
221M08052 .....66
221M08062 .....66
222M0139 .......61
227M00042 .....61
227M00048 .....61
227M00060 .....61
227M00073 .....61
227M00076 .....61
227M00089 .....61
227M00108 .....61
227M00114 .....61
227M00168 .....61
227M00219 .....61
227M002732 .....61
227M003242 .....61
22V42262 ..........69
250A01163 .....71
250A01180 .....71
250A01311 .....71
250A01342 .....71
250A01363 .....71
250A01380 .....71
250A01512 .....70
250A03015 .....70
250A06330 .....71
250A08042 .....71
250A08063 .....71
250M01162 .....71
250M01210 .....70
250M01510 .....70
250M02010 .....70
250M02012 .....70
250M02015 .....70
250M02520 .....70
250M02612 .....70
250M02615 .....70
250M02620 .....70
250M03020 .....70
250M03025 .....70
250M03026 .....70
250M04220 .....70
250M04225 .....70
250M04226 .....70
250M04230 .....70
250M05230 .....70
250M05242 .....70
250M05342 .....70
250M06230 .....70
250M06242 .....70
= 1 for red paint finish (RAL 3000), 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating (where available)
278
www.grinnell.com
INDICES
Part Number Index
(Page 2 of 4)
Part No. . . . .Page
250M06252 .....71
250M06320 .....71
250M06326 .....71
250M06342 .....71
250M06352 .....71
250M06353 .....71
250M08052 .....71
250M08062 .....71
251A03020 .....73
251A03025 .....73
251A04220 .....73
251A04225 .....73
251A04230 .....73
251A05342 .....73
251A06330 .....73
251A06342 .....74
251A06353 .....74
260M00034 .....62
260M00042 .....62
260M00048 .....62
260M00060 .....62
260M00073 .....62
260M00076 .....62
260M00089 .....62
260M00114 .....62
260M00139 .....62
260M00141 .....62
260M00159 .....62
260M00165 .....62
260M00168 .....62
260M00219 .....62
260M00273 .....62
260M00324 .....62
301T00457 ......54
301T00508 ......54
301T00610 ......54
304H000342 ......82
304H000422 ......82
304H000482 ......82
304H000602 ......82
304H000762 ......82
304H000892 ......82
305H000342 ......82
305H000422 ......82
305H000482 ......82
305H000602 ......82
305H000762 ......82
305H000892 ......82
310T00457 ......53
310T00508 ......53
310T00610 ......53
311F00273 ......56
311F00324 ......56
311F00355 ......56
311F00406 ......56
311F00457 ......56
311F00508 ......56
311F00610 ......56
312F00165 ......55
312F00273 ......55
312F00324 ......55
312T00355 ......55
312T00406 ......55
312T00457 ......55
312T00508 ......55
312T00610 ......55
314F00034 ......76
314F00042 ......76
314F00048 ......76
314F00060 ......76
314F00076 ......76
314F00089 ......76
314F00114 ......76
314F00139 ......76
314F00165 ......76
314F00168 ......76
314F00219 ......76
314F00273 ......76
314F00324 ......76
319T00457 ......60
319T00508 ......60
319T00610 ......60
321F01152 ......66
321F01162 ......66
321F01311 ......67
321F01330 ......67
321F01342 ......67
321F01352 ......67
321F01362 ......67
321F01363 ......67
321F01380 ......67
321F02010 ......65
321F05226 ......65
321F06220 ......66
321F06226 ......66
321T01411 ......67
321T01413 ......67
321T01442 ......67
321T01463 ......67
321T01480 ......67
321T01611 ......67
321T01613 ......67
321T01614 ......67
321T01642 ......67
321T01663 ......67
321T01680 ......67
321T01811 ......67
321T01813 ......68
321T01814 ......68
321T01816 ......68
321T01863 ......67
321T01880 ......67
321T02111 ......68
321T02113 ......68
321T02114 ......68
321T02116 ......68
321T02118 ......68
321T02163 ......68
321T02180 ......68
321T02411 ......68
321T02413 ......68
321T02414 ......68
321T02416 ......68
321T02418 ......68
321T02421 ......68
321T02480 ......68
322F020202.......69
322F026202.......69
322F026252.......69
322F030202.......69
322F030252.......69
322F042202.......69
322F042262.......69
325F01042 ......77
325F01052 ......77
325F01063 ......77
325F01080 ......77
325F01242 ......77
325F01263 ......77
325F01280 ......77
325F03020 ......77
325F03026 ......77
325F04220 ......77
325F04226 ......77
325F04230 ......77
325F05220 ......77
325F05230 ......77
325F05242 ......77
325F06220 ......77
325F06230 ......77
325F06242 ......77
325F06252 ......77
325F06320 ......77
325F06330 ......77
325F06342 ......77
325F06352 ......77
325F08042 ......77
325F08052 ......77
325F08063 ......77
327F00141 ......61
327F00165 ......61
341F00060 ......48
341F00073 ......48
341F00089 ......48
341F00114 ......48
341F00141 ......48
341F00168 ......48
341F00219 ......48
341F00273 ......48
341F00324 ......48
341T00355 ......48
341T00406 ......48
341T00457 ......48
341T00508 ......48
341T00610 ......48
343F00060 ......46
343F00076 ......46
343F00089 ......46
343F00108 ......46
343F00114 ......46
343F00133 ......46
343F00139 ......46
343F00159 ......46
343F00165 ......46
343F00168 ......46
343F00219 ......46
343F00273 ......46
343F00324 ......46
343T00355 ......47
343T00406 ......47
343T00457 ......47
343T00508 ......47
343T00610 ......47
344F00219 ......46
344F00273 ......46
344F00324 ......46
344T00355 ......47
344T00406 ......47
344T00457 ......47
344T00508 ......47
344T00610 ......47
350F01142 ......71
350F01152 ......71
350F01362 ......71
350F02610 ......70
350F04241 ......70
350F06361 ......71
350F06362 ......71
350F08053 ......71
350T01411 ......72
350T01413 ......72
350T01462 ......71
350T01463 ......71
350T01480 ......71
350T01611 ......72
350T01613 ......72
350T01614 ......72
350T01680 ......72
350T01813 ......72
350T01814 ......72
350T01816 ......72
350T02111 ......72
350T02113 ......72
350T02114 ......72
350T02116 ......72
350T02118 ......72
350T02411 ......72
350T02413 ......72
350T02414 ......72
350T02416 ......72
350T02418 ......72
350T02421 ......72
351F01142 ......74
351F01152 ......74
351F01153 ......74
351F01162 ......74
351F01163 ......74
351F01180 ......74
351F01342 ......74
351F01362 ......74
351F01363 ......74
351F01380 ......74
351F01411 ......74
351F02010 ......73
351F02012 ......73
351F02015 ......73
351F02615 ......73
351F02620 ......73
351F03026 ......73
351F04226 ......73
351F05230 ......73
351F05242 ......73
351F06220 ......73
351F06230 ......73
351F06242 ......73
351F06252 ......73
351F06320 ......73
351F06352 ......74
351F08030 ......74
351F08042 ......74
351F08052 ......74
351F08053 ......74
351F08062 ......74
351F08063 ......74
351T01411 ......75
351T01413 ......75
351T01462 ......74
351T01463 ......74
351T01480 ......75
351T01611 ......75
351T01613 ......75
351T01614 ......75
351T01680 ......75
351T01813 ......75
351T01814 ......75
351T01816 ......75
351T02111 ......75
351T02113 ......75
351T02114 ......75
351T02116 ......75
351T02118 ......75
351T02411 ......75
351T02413 ......75
351T02414 ......75
351T02416 ......75
351T02418 ......75
351T02421 ......75
360T00355 ......62
360T00406 ......62
360T00457 ......62
360T00508 ......62
360T00610 ......62
361M00060 .....64
361M00076 .....64
361M00089 .....64
361M00114 .....64
361M00139 .....64
361M00141 .....64
361M00165 .....64
361M00168 .....64
361M00219 .....64
361M00273 .....64
362M00076 .....64
362M00089 .....64
362M00114 .....64
362M00139 .....64
362M00141 .....64
362M00165 .....64
362M00168 .....64
362M00219 .....64
362M00273 .....64
363M00060 .....63
363M00076 .....63
363M00089 .....63
363M00114 .....63
363M00139 .....63
363M00141 .....63
363M00165 .....63
363M00168 .....63
363M00219 .....63
364M00060 .....63
364M00076 .....63
364M00089 .....63
364M00114 .....63
364M00139 .....63
364M00141 .....63
364M00165 .....63
364M00168 .....63
364M00219 .....63
365M00060 .....63
365M00076 .....63
365M00089 .....63
365M00114 .....63
365M00139 .....63
365M00165 .....63
365M00168 .....63
365M00219 .....63
39101-060 .........95
39101-073 .........95
39101-076 .........95
39101-089 .........95
39101-114 .........95
39101-139 .........95
39101-141 .........95
39101-165 .........95
39101-168 .........95
39101-219 .........95
39101HV060 ......94
39101HV073 ......94
39101HV076 ......94
39101HV089 ......94
39101HV114 ......94
39101HV139 ......94
39101HV141 ......94
39101HV165 ......94
39101HV168 ......94
39101HV219 ......94
39101N-060 .......96
39101N-073 .......96
39101N-076 .......96
39101N-089 .......96
39101N-114 .......96
39101N-139 .......96
39101N-141 .......96
39101N-165 .......96
39101N-168 .......96
39101N-219 .......96
39107-089 .........97
39107-114 .........97
39107-139 .........97
39107-141 .........97
39107-165 .........97
39107-168 .........97
39107-219 .........97
39107-273 .........97
39107-324 .........97
401H000344 .... 151
401H000424 .... 151
401H000484 .... 151
401H000604 .... 151
401H000764 .... 151
401H000894 .... 151
401H001144 .... 151
401H001394 .... 151
401H001684 .... 151
401H002194 .... 151
401H002734 .... 151
401H003244 .... 151
405MD00344 ... 144
405MD00424 ... 144
405MD00484 ... 144
405MD00604 ... 144
405MD00734 ... 144
405MD00764 ... 144
405MD00894 ... 144
405MD01144 ... 144
405MD01394 ... 144
405MD01414 ... 144
405MD01684 ... 144
405MD02194 ... 144
407GT00422 .... 138
407GT00482 .... 138
407GT00602 .... 138
407GT00732 .... 138
407GT00892 .... 138
407GT01142 .... 138
407T000212 ..... 138
407T000262 ..... 138
Indices
= 1 for red paint finish (RAL 3000), 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating (where available)
279
INDICES
Part Number Index
(Page 3 of 4)
Indices
707AE0165 ......26
707AE0168 ......26
707AE0219 ......27
707AE0273 ......27
707AE0324 ......27
707AE0355 ......27
707AE0406 ......27
707AE0457 ......27
707AE0508 ......27
707AE0610 ......27
707ME0042 .....26
716AE2015 ......33
716AE2520 ......33
716AE3020 ......33
716AE3025 ......33
716AE4220 ......33
716AE4225 ......33
716AE4230 ......33
716AE5342 ......33
716AE6342 ......33
716AE6353 ......33
716AE8063 ......33
716ME2620 .....33
716ME3026 .....33
716ME4226 .....33
716ME5242 .....33
716ME6242 .....33
71AAE0060 .....42
71AAE0073 .....42
71AAE0089 .....42
71AAE0114 .....42
71AAE0141 .....42
71AAE0168 .....42
71AAE0219 .....42
71AAE0273 .....42
71AAE0324 .....42
71AAE0355 .....43
71AAE0406 .....43
71AAE0457 .....43
71AAE0508 .....43
71AAE0609 .....43
71DAE0060......41
71DAE0076......41
71DAE0089......41
71DAE0114......41
71DAE0165......41
71DAE0168......41
71DAE0273......41
71DAE8273......41
71DME0139 .....41
71DME0219 .....41
71DME0324 .....41
71DME8219 .....41
71DME8324 .....41
7289920 .......... 194
7289930 .......... 194
7289940 .......... 194
7289960 .......... 194
7289980 .......... 194
7290020E ........ 182
7290030E ........ 182
7290040E ........ 182
7290040HE ...... 182
7290040LE ....... 182
7290060E ........ 182
7290060HE ...... 182
7290060LE ....... 182
7290080E ........ 182
= 1 for red paint finish (RAL 3000), 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating (where available)
280
www.grinnell.com
INDICES
Part Number Index
(Page 4 of 4)
Part No. . . . .Page
730AT6220 ......87
730AT6226 ......87
730AT6230 ......87
730AT6315 ......87
730AT6320 ......87
730AT6326 ......87
730AT6330 ......87
730AT8020 ......87
730AT8026 ......87
730AT8030 ......87
730MT2520 .....85
730MT2612 .....85
730MT2615 .....85
730MT2620 .....85
730MT3005 .....86
730MT3007 .....86
730MT3010 .....86
730MT3012 .....86
730MT3015 .....86
730MT3020 .....86
730MT4205 .....86
730MT4207 .....86
730MT4210 .....86
730MT4220 .....86
730MT4226 .....86
730MT4230 .....86
730MT5315 .....86
730MT5320 .....86
730MT5326 .....86
730MT5330 .....86
730MT6212 .....86
730MT6312 .....87
74020EPDME .... 241
74020NITRILS ... 241
74025EPDME .... 241
74025NITRILS ... 241
74030EPDME .... 241
74030NITRILS ... 241
74040EPDME .... 241
74040NITRILS ... 241
74050EPDME .... 241
74050NITRILS ... 241
74060EPDME .... 241
74060NITRILS ... 241
74080EPDME .... 241
74080NITRILS ... 241
740AE0060* ......22
740AE0073* ......22
740AE0089* ......22
740AE0114* ......22
740AE0141* ......22
740AE0168* ......22
740AE0219* ......22
740ME0076* ......22
740ME0139* ......22
740ME0165* ......22
760F00060....... 120
760F00073....... 120
760F00076....... 120
760F00088....... 120
760F00114....... 120
760F00139....... 120
760F00165....... 120
760F00168....... 120
760F00219....... 120
760F00273....... 120
760F00324....... 120
770AE0060 ......25
770AE0073 ......25
770AE0089 ......25
770AE0114 ......25
770AE0168 ......25
770AE0219 ......25
770AE0273 ......25
770AE0324 ......25
772AE0355 ......21
772AE0355 ......21
772AE0406 ......21
772AE0406 ......21
772AE0457 ......21
772AE0457 ......21
772AE0508 ......21
772AE0508 ......21
772AE0610 ......21
772AE0610 ......21
772ME0042 .....20
772ME0048 .....20
772ME0060 .....20
772ME0073 .....20
772ME0076 .....20
772ME0089 .....20
772ME0114 .....20
772ME0139 .....20
772ME0141 .....20
772ME0165 .....20
772ME0168 .....20
772ME0219 .....20
772ME0273 .....21
772ME0324 .....21
772MT0042 .....20
772MT0048 .....20
772MT0060 .....20
772MT0073 .....20
772MT0076 .....20
772MT0089 .....20
772MT0114 .....20
772MT0139 .....20
772MT0141 .....20
772MT0165 .....20
772MT0168 .....20
772MT0219 .....20
772MT0273 .....21
772MT0324 .....21
774ME0034 .....23
774ME0042 .....23
774ME0048 .....23
774ME0060 .....23
774ME0073 .....23
774ME0076 .....23
774ME0089 .....23
774ME0114 .....23
774ME0139 .....23
774ME0141 .....23
774ME0165 .....23
774ME0168 .....23
774ME0219 .....23
774ME0273 .....23
774ME0324 .....23
774MT0034 .....23
774MT0042 .....23
774MT0048 .....23
774MT0060 .....23
774MT0073 .....23
774MT0076 .....23
774MT0089 .....23
774MT0114 .....23
774MT0139 .....23
774MT0141 .....23
774MT0165 .....23
774MT0168 .....23
774MT0219 .....23
774MT0273 .....23
774MT0324 .....23
780AE0048 ......31
780AE0060 ......31
780AE0073 ......31
780AE0076 ......31
780AE0089 ......31
780AE0114 ......31
780AE0139 ......31
780AE0141 ......31
780AE0165 ......31
780AE0168 ......31
780AE0219 ......31
8000B .............. 240
909440ES ........ 168
909460ES ........ 168
909480ES ........ 168
909510ES ........ 165
909512ES ........ 165
909514ES ........ 165
909516ES ........ 165
909518ES ........ 165
909520ES ........ 165
909521ES ........ 165
909530ES ........ 165
909540ES ........ 165
909560ES ........ 165
909580ES ........ 165
909710ES ........ 167
909712ES ........ 167
909720ES ........ 167
909730ES ........ 167
909740ES ........ 167
909760ES ........ 167
909780ES ........ 167
909AE0060 ......30
909AE0060 .... 198
909AE0073 ......30
909AE0073 .... 198
909AE0076 ......30
909AE0076 .... 198
909AE0089 ......30
909AE0089 .... 198
909AE0114 ......30
909AE0114 .... 198
909AE0165 ......30
909AE0165 .... 198
909AE0168 ......30
909AE0168 .... 198
909AE0219 ......30
909AE0219 .... 198
909AE0273 ......30
909AE0273 .... 198
ALG0034 .......... 131
ALG0042 .......... 131
ALG0048 .......... 131
ALG0060 .......... 131
ALG0073 .......... 131
ALG0076 .......... 131
ANS0089 ......... 132
ANS0114 ......... 132
ANS0139 ......... 132
ANS0141 ......... 132
INS609M ............44
INSDIN060M ......44
INSDIN076M ......44
INSDIN089M ......44
INSDIN114M ......44
INSDIN139M ......44
INSDIN165M ......44
INSDIN168M ......44
INSDIN219M ......44
INSDIN273M ......44
INSDIN324M ......44
ITGM 36 ........... 193
ITGM 8 ............. 193
K010000734 .... 119
K015000894 .... 119
K020000894 .... 119
K025001144 .... 119
K030001144 .... 119
K045001144 .... 119
K050001414 .... 119
K075001684 .... 119
K100001684 .... 119
K125001684 .... 119
K150002194 .... 119
K200002194 .... 119
K250002194 .... 119
K300002194 .... 119
K350002734 .... 119
K400002734 .... 119
K450002734 .... 119
K500003244 .... 119
PUNCH ............. 225
RJ-624 .............. 223
RXAG034 ......... 130
RXAG042 ......... 130
RXAG048 ......... 130
RXAG060 ......... 130
RXAG073 ......... 130
RXAG076 ......... 130
RXAG089 ......... 130
RXAG114 ......... 130
RXAG139 ......... 130
RXAG141 ......... 130
RXAG165 ......... 130
RXAG168 ......... 130
RXAG219 ......... 130
RXAG273 ......... 130
STAND .............. 223
UFBX1-034 ........ 134
UFBX1-042 ........ 134
UFBX1-048 ........ 134
UFBX1-060 ........ 134
UFBX1-076 ........ 134
UFBX1-089 ........ 134
UFBX1-114 ........ 135
UFBX1-139 ........ 135
UFBX1-168 ........ 135
UFBX1-219 ........ 135
UFBX1-273 ........ 135
VR69-252 ......... 240
ZKLM024 .......... 225
Indices
= 1 for red paint finish (RAL 3000), 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating (where available)
281
INDICES
Figure Number Index
(Page 1 of 2)
Indices
282
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
www.grinnell.com
INDICES
Figure Number Index
(Page 2 of 2)
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Figure
Indices
283
Hungary (Budapest)
Sweden (Lammhult)
Belgium (Mechelen)
Italy (Milan)
Norway (Lrenskog)
Turkey (Ankara)
France (Paris)
Russia
Germany (Rodgau)
Spain (Madrid)
www.grinnell.com
Copyright 2013 Tyco Fire Products LP. All rights reserved.