Professional Documents
Culture Documents
Ass 1
Ass 1
Use solidworks software for modeling and assembly of the following (fixed
coupling) :
Task2 ( P7 ):
A- Identify the hardware and software elements of the CNC
milling machine to produce the finished product that is
required in task 8.
B- Identify the inputs and the outputs of the CAM system which
you will use to complete the required work in task 8.
Task3 (P8):
A- Produce CAD/CAM part program for engraving the given
model on milling machine
Note:The given model is a picture which you should convert
it to 3D model
( Note: To achieve this criterion you should attach the
evidence as noted pictures and screen shot of your program
and the setting of software).
Task4 ( P9 ):
Input the previous part program( programs of task 8) to a milling
CNC machine to manufacture that part.
( The evidence for this task is the product that you manufactured,
noted pictures, and screen shots for simulation).
Task5 ( D3.2 ):
Evaluate your own work by measuring the part dimensions to
compare them with drawing and observe surface finish defects and
give your conclusion about the required improvements .
Task6 ( M3.3 ):
Use the accurate technical language and introduce your report
including solution of all tasks in good presentation method