@YAMAHA
WX
Use only a Yamaha PA-SB AC Adaptor to power the
WXS from a household AC outlet.
1. Connect the DC output cable from the PA-3B to the
DC IN 12V connector on the WXS,
2. Plug the PA-3B into a convenient AC wall outlet.
oc IN 2v
3 Clip the AC adaptor’s output cable into the cable holder
‘on the WXS before clipping a MIDI cable in to the
cable holder
MIDI cable
AC adaptors cable
+ Use only a Yamaha PA-3B AC Adaptor to power the
WAS from a household AC outlet. The use of other AC
adaptors wil void the warranty, and pessiby damage
the WxE.
cp
1. Use a coin to unlock the battery cover, then remove
the cover as shown in the illustration.
2. Install a complete set of six new SUM-4 batteries, be-
ing sure to orient the polarity of the batteries properly
as in the illustration,
PSS
y=
3. Replace and lock the battery cover.
+ When the batteries are almost depleted the LED ind-
ators wll ash andthe sound may become distorted
‘orrediced in volume, Be sure to replace the Datars
early to mininize sound quality degradation.
+ When an AC adaptors plugged int the WX the in
ternal batters are automaticaly disconnected
+ Always replace all six batteries with new ones atthe
‘same time. Nevermix new batteries wit old ones, and
on mix citferent types of batteries (Le. standard and
‘akkaline),o diferent brands of batteres.
am