Professional Documents
Culture Documents
Softsynchro Micro
Softsynchro Micro
Short description
The new Softsynchro Micro tap holders are designed especially for small taps from M 0.5 to M 4, and
extend the known application range of the Softsynchro series down to the smallest threads which can
be produced today.
As with the successful larger designs, a minimum length compensation serves to compensate
discrepancies between the feed on the side of the machine tool and the pitch of the tap.
Tap clamping is provided by means of cylindrical collets in the size ER 8. The target application sector for
these mini size tap holders is the Mini and Micro component industry, represented by watch makers,
the medical or the electrical industry.
Characteristics
Size:
Cutting range:
Length compensation range:
Collet adaptation:
Clamping nut:
Coolant-lubricant supply:
Shank standards:
Softsynchro Micro
M 0.5 - M 4 / dia. 2 - 4.5 mm
0.2 mm
ER 8
Hi-Q/ERM 8
External
- Cylindrical shank dia. 10h6, long design
- Cylindrical shank dia. 10h6, short design acc. DIN 1835 A
- Cylindrical shank dia. 10h6, design acc. DIN 1835 B+E
- Hollow taper shank HSK 32, design acc. DIN 69893 A
- Further shank designs available upon request
DIN 371
Square
Clamping depth E
with Hi-Q/ERM 8
[mm]
[mm]
M 0.5 - M 0.9
Shank dia.
D1
[mm]
min.
max.
20
2.2
20
M 3
M 1 - M 1.8
M 3.5
2.5
2.1
14
20
M 2 - M 2.6
M 4
2.8
2.1
15
20
M 3
3.5
2.7
15
19.5
M 3.5
15
19
M 4
4.5
3.4
15
19
D1
12
ER 8
10h6
20
Hi-Q/ERM 8
E
17
Compression 0.2 mm Tension 0.2 mm
66
43.5
12
Hi-Q/ERM 8
ER 8
10h6
20
D1
Softsynchro Micro with cylindrical shank dia. 10h6, short design acc. DIN 1835 A
E
17
Compression 0.2 mm Tension 0.2 mm
40
43.5
Vie
D1
ER 8
View A
12
10h6
20
wA
Hi-Q/ERM 8
Softsynchro Micro with cylindrical shank dia. 10h6, design acc. DIN 1835 B+E
120
E
17
Compression 0.2 mm Tension 0.2 mm
43.5
40
D1
12
Hi-Q/ERM 8
ER 8
20
32
Softsynchro Micro with hollow taper shank HSK 32, design acc. DIN 69893 A
E
17
Compression 0.2 mm Tension 0.2 mm
16
60