Professional Documents
Culture Documents
Module 3: Second-Order Partial Differential Equations
Module 3: Second-Order Partial Differential Equations
Equations
In Module 3, we shall discuss some general concepts associated with second-order linear
PDEs. These types of PDEs arise in connection with various physical problems such as
the motion of a vibration string, heat ow, electricity, magnetism and uid dynamics. The
second-order partial dierential equations are classied into three dierent types. Further,
the simplied canonical/normal forms are obtained for second order linear equations in
two independent variables.
The lectures are organized as follows. The rst lecture is devoted to the classication
of second-order linear PDEs in two or more independent variables. These equations are
classied into hyperbolic, parabolic and elliptic types. The reduction to the canonical form
(or normal form) of second order equations in two independent variables are discussed in
the second lecture. Finally, the third lecture is devoted to wellposedness, superposition
principle and method of factorization for these types of equations.
Lecture 1
Classication of PDEs is an important concept because the general theory and methods
of solution usually apply only to a given class of equations. Let us rst discuss the
classication of PDEs involving two independent variables.
Consider the following general second order linear PDE in two independent variables:
A
2u
2u
2u
u
u
+
B
+
C
+D
+E
+ F u + G = 0,
2
2
x
xy
y
x
y
(1)
(2)
where
u
u
2u
2u
2u
, uy =
, uxx =
,
u
=
,
u
=
.
yy
xy
x
y
x2
xy
y 2
Assume that A, B and C are continuous functions of x and y possessing continuous partial
ux =
(3)
We know that the nature of the curves will be decided by the principal part ax2 +bxy +cy 2
i.e., the term containing highest degree. Depending on the sign of the discriminant b2 4ac,
we classify the curve as follows:
If b2 4ac > 0 then the curve traces hyperbola.
If b2 4ac = 0 then the curve traces parabola.
If b2 4ac < 0 then the curve traces ellipse.
With suitable transformation, we can transform (3) into the following normal form
x2 y 2
2 = 1 (hyperbola).
a2
b
2
x = y (parabola).
x2 y 2
+ 2 = 1 (ellipse).
a2
b
Linear PDE with constant coecients. Let us rst consider the following general
linear second order PDE in two independent variables x and y with constant coecients:
Auxx + Buxy + Cuyy + Dux + Euy + F u + G = 0,
(4)
where the coecients A, B, C, D, E, F and G are constants. The nature of the equation
(4) is determined by the principal part containing highest partial derivatives i.e.,
Lu Auxx + Buxy + Cuyy .
(5)
For classication, we attach a symbol to (5) as P (x, y) = Ax2 + Bxy + Cy 2 (as if we have
replaced x by
and y by
y ).
(6)
(7)
(8)
Linear PDE with variable coecients. The above classication of (4) is still valid if
the coecients A, B, C, D, E and F depend on x, y. In this case, the conditions (6), (7)
and (8) should be satised at each point (x, y) in the region where we want to describe its
nature e.g., for elliptic we need to verify
B 2 (x, y) 4A(x, y)C(x, y) < 0
for each (x, y) in the region of interest. Thus, we classify linear PDE with variable coecients as follows:
B 2 (x, y) 4A(x, y)C(x, y) > 0 at (x, y) = Eq. (4) is hyperbolic at (x, y)
(9)
(10)
(11)
Note: Eq. (4) is hyperbolic, parabolic, or elliptic depends only on the coecients of the
second derivatives. It has nothing to do with the rst-derivative terms, the term in u, or
the nonhomogeneous term.
EXAMPLE 1.
1. uxx + uyy = 0 (Laplace equation). Here, A = 1, B = 0, C = 1 and B 2 4AC =
4 < 0. Therefore, it is an elliptic type.
4. uxx + xuyy = 0,
hyperbolic for x < 0 and elliptic for x > 0. This example shows that equations with
variable coecients can change form in the dierent regions of the domain.
i=1 j=1
u
2u
aij
+
bi
+ cu + d = 0,
xi xj
xi
n
(12)
i=1
where the coecients aij , bi , c and d are functions of x = (x1 , x2 , , xn ) alone and u =
u(x1 , x2 , , xn ).
Its principal part is
L
n
n
aij
i=1 j=1
2
.
xi xj
(13)
n
n
a
ij
i=1 j=1
Note that
2u
xi xj
2u
xj xi . As in two-space
u
replacing x
by xi ).
i
2
.
xi xj
(14)
P (x1 , x2 , , xn ) =
n
n
aij xi xj .
(15)
i=1 j=1
Since A is a real valued symmetric (aij = aji ) matrix, it is diagonalizable with real
eigenvalues 1 , 2 , . . . , n (counted with their multiplicities). In other words, there exists
a corresponding set of orthonormal set of n eigenvectors, say 1 , 2 , , n with R =
RT AR =
=D
(16)
n
We now classify (12) depending on sign of eigenvalues of A:
(a) If i > 0 i or i < 0 i then (12) is elliptic type.
(b) If one or more of the i = 0 then (12) is parabolic type.
(c) If one of the i < 0 or i > 0, and all the remaining have
opposite sign then (12) is said to be of hyperbolic type.
EXAMPLE 2.
1. 2 u = uxx + uyy + uzz = 0. In this case, i = 1 > 0 for all i = 1, 2, 3. It is an elliptic
PDE since all eigenvalues are of one sign.
2. It is an easy exercise to check that ut 2 u = 0 is of parabolic type.
3. The equation utt 2 u = 0 is of hyperbolic type.
EXAMPLE 3. Classify ux1 x1 + 2(1 + cx2 )ux2 x3 = 0.
To symmetrize, write it as
ux1 x1 + (1 + cx2 )ux2 x3 + (1 + cx2 )ux3 x2 = 0
i.e., xT Ax cx2 = 0, where
A= 0
0
0
0 1 + cx2
x1
1 + cx2
x = x2
0
x3
1
0
0
1 =
0 2 = 1/2 3 = 1/ 2
1/ 2
1/ 2
0
0
0
R=
0 1/2 1/ 2
0 1/ 2 1/ 2
So
Note that R = RT = R1 .
RT AR =
0 1 + cx2
0
0
0
(1 + cx2 )
=D