Heterogeneous Systems Jeffrey Young August 28th, 2012 SVN revision 2028 http://code.google.com/p/gpuocelot/ This document details the installation of Ocelot from the Subversion repository using Ubuntu 12.04 as the base OS. If you can use one of the prepackaged builds, this is recommended unless you need to use the latest features of Ocelot. If you run into any problems with the process in this document first try checking the wiki at http://code.google.com/p/gpuocelot/w/list and then the Google forum at https://groups.google.com/forum/#!forum/gpuocelot. 1) Make sure the required compilers and tools are installed: C++ compiler (≥GCC 4.5.x) Lex lexer generator (≥ Flex 2.5.35) YACC parser generator ( ≥Bison 2.4.1) Scons build tool Subversion sudo aptget install flex bison scons buildessential subversion 2) Get the source code from Google Code. Note that this pulls the entire trunk with all tests and examples, which is very large svn checkout http://gpuocelot.googlecode.com/svn/