A2: Position of ground water table lays a significant impact on bearing capacity .In clayey soil if the water table is beneath the ground surface then soil gets saturated. A3: If table width is less than or equal to depth, B below the level of footing, then a part of soil saturated. SCREEN 4: A1: If there is enough water in the soil and potential shear zone to develop a ground water table, then bearing capacity reduced due effective stress. A2: When exploring the sub-surface conditions, the current location of ground water is determined. SCREEN 5: A1: The width of failure surface is less than or equal to depth of footing B below the footing base. A2: If water table is near the depth, it will cause no effect on bearing capacity.