Anonim, 2009, Mechanical Shaft Seals For Pumps, http://www.grundfos.com,
online accessed 14 Maret 2013. Ardianto, D.W., 2010, Analisa Kegagalan Sucker Rod, Jurusan Teknik Mesin dan Industri, Fakultas Teknik, Universitas Gadjah Mada, Indonesia. ASM Metals Handbook, 2004, Metallography and Microstucture, ASM International, USA. ASM Handbook, 1990, Properties and Selection : Iron Steels and High Performance Alloys, vol.1, ASM International. Berndt F., Bennekom van. A., 1999, Pump Shaft Failures - a compendium of case studies, Pergamon, South Africa. Callister, W.D., 2007, Fundamentals of Materials Science and Engineering Materials, Jhon Wiley & Sons Inc., New York. Church, A.H., 1993, Pompa dan Blower Sentrifugal, Erlangga, Jakarta. Das G., Sinha A.N., Mishra S.K., Bhattacharya D.K., 1998, Failure Analysis of Counter Shafts of Centrifugal Pump, Pergamon, South Africa. Djaprie, S., Dieter, G.E, 1987, Metalurgi Mekanik, Edisi 3, Erlangga, Jakarta. Gunawan, F., 2013, Analisa Kegagalan Pin Katup Kupu-Kupu Pada Pipa Pendingin Boiler, Jurusan Teknik Mesin dan Industri, Fakultas Teknik, Universitas Gadjah Mada Gupta, R.,B., 2002, Material Science 11th edition, Smt. Sumitra Handa, New Delhi. Handayani, S.U., 2010, Bahan Ajar Pompa dan Kompresor, Jurusan Teknik Mesin, Fakultas Teknik, Universitas Diponegoro, Indonesia. Hicks and Edward, 1971, Pump Application Engineering, McGraw-Hill Book Company, New York. Huebner
M.,
2005,
Material
Selection
For
Mechanical
Seal,
http://www.flowserve.com, online accessed on 19 Mei 2013.
Honeycombe, R.W.K., and Bhadesia, H. K. D. H., 1995, Steels : Microstructure and Properties, 2nd ed., Edward Arnold, London.
69
Jones L.T., 2010, Handbook of Reliability Prediction Procedures for Mechanical
Equipment, NSWC, Maryland. Karassik, I.J. and Carter R., 1960, Centrifugal Pump Selection, Operation, and Maintenance, McGraw-Hill, USA. Karassik, I.J., Messina P.J., Cooper P., Heald C.C., 2001, Pump Handbook, McGraww-Hill, USA. Kutz, M., 2002, Handbook of Material Selection, Jhon Wiley and Sons, New York. Muhammad W., Deen K. M., 2010, Failure Analysis of Water Pump Shaft, Springer, Pakistan. Said, F.D., 2011, Studi Perbandingan Sifat Fisis dan Mekanis Poros Asli dan Fabrikasi Pad Pompa Sentrifugal, Jurusan Teknik Mesin dan Industri, Fakultas Teknik, Universitas Gadjah Mada, Indonesia. Skewis
W.H.,
2012,
Mechanical
Seal
Failure
Mode
and
Cause,
http://www.mechrel.com, online accessed on 19 Mei 2013.
Smith, W.F., 1990, Structure and Properties of Engineering Alloy, McGraw-Hill, 2nd ed., Singapore. Smith, W.F., 1993, Principle of material science and engineering, McGraw-Hill, 2nd ed., Singapore. Sularso, 2000, Pompa & Kompresor : Pemilihan, Pemakaian, dan Pemeliharaan, PT. Pradnya Paramitha, Jakarta. Sularso dan Tahara, H., 1985, Pompa dan Kompresor, PT. Pradnya Paramita, Jakarta. Supriyono, Adjiantoro B., 2010, Analisa Kegagalan Poros Pompa Air Laut Pada Unit PLTU, Jurnal Ilmiah Teknologi dan Rekayasa, Universitas Gunadarma. Tawancy, H.M., Ul-Hamid, A., and Abbas, N. M., 2004, Practical Engineering Failure Analysis, Marcel Dekker, New York.