Professional Documents
Culture Documents
EUROPEAN STANDARD
NORME EUROPENNE
EUROPISCHE NORM
December 2009
Dcembre 2009
Dezember 2009
ICS 53.020.20
English version
Version Franaise
Deutsche Fassung
This corrigendum becomes effective on 9 December 2009 for incorporation in the three official
language versions of the EN.
Ce corrigendum prendra effet le 9 dcembre 2009 pour incorporation dans les trois versions
linguistiques officielles de la EN.
Die Berichtigung tritt am 9.Dezember 2009 zur Einarbeitung in die drei offiziellen Sprachfassungen
der EN in Kraft.
2009 CEN
All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Tous droits d'exploitation sous quelque forme et de quelque manire que ce soit rservs dans le monde entier aux
membres nationaux du CEN.
Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern
von CEN vorbehalten.
Ref. No.:EN 13001-1:2004+A1:2009/AC:2009 D/E/F
EN 13001-1:2004+A1:2009/AC:2009 (E)
1 , 2
a (R) =
a,i + tg m , j
1 + tg
1+ R
1 R
".
Replace the existing Equation (11) with: "
a ( m ) = a ,i + tg ( m, j m )
".
Replace the existing Equation (12) with: "
tg = tg1 =
".
a ( R = 1)
-1
a ( R = 0)
EN 13001-1:2004+A1:2009/AC:2009 (E)
tg = tg 2 = 1
a ( R = 1)
a ( R = )
".
Replace the meaning of the equation with:
"where
a,i
is the stress aplitude of range i resulting from "rainflow counting" (see Figure 6);
m,j
is the mean stress of range j resulting from "rainflow counting" (see Figure 6);
a(R)
a (m)
is the constant stress ratio selected for one-parameter classification of stress cycles;
is the constant mean stress selected for one-parameter classification of stress cycles;
1, 2
are the angles between the horizontal line and the lines of constant N in the a-m-plane (see
Figures 7 and 8),
NOTE If the mean stress m is assumed not to be decisive (e.g. for welded structures),
1 = 2 = 0 .
is the number of stress cycles to failure by fatigue for the stress cycle described by a,i and m,j;
a (R = -1),
a (R = 0),
a (R = )
are the stress amplitudes, in dependence on the specified stress ratio R and
number of cycles N, for which failure by fatigue occurs.".