Professional Documents
Culture Documents
Upgradeguide To Layout310
Upgradeguide To Layout310
PUBLIC
C
a'DF[wS?d
Fe];7\O(\"ywJ\hGnGwFtc
Document History
The following table provides an overview of the most important document changes.
Version
Date
Description
1.0
2014-02-11
2/10
PUBLIC
2014-02-11
Table of Contents
Chapter 1
2014-02-11
PUBLIC
3/10
As of SP16, SAP NFE supports the receiving and issuing of NF-es with the new Layout 3.10 and the
contingency process SVC.
For the new Layout, the government systems offer new Web Services with different structures.
Therefore we have introduced a new function for integrating the ERP backend as well as new proxies
for communicating to the Authority Web Services via PI.
The process for issuing NF-es with the new Layout 3.1 was implemented as a process flow (which is
similar to the inbound processing of NF-es). Therefore, the system offers a different set of monitors for
NF-es, batches and service status results depending on which Layout is used.
Changes when Receiving NF-es with Layout 2.00 and Layout 3.10
The process of receiving NF-es did not change: the Fiscal Workplace shows all NF-es in both Layouts.
The additional information available in the new Layout will be shown as additional fields or as separate
tabs in the NF-e Details.
Changes when Issuing NF-es with Layout 2.00
1.
2.
3.
Customizing
Nothing has changed as long as the contingency process SVC is not needed for these NF-e.
Batch Jobs
Nothing has changed, the same reports are scheduled as in earlier SPs:
/XNFE/PROCESS_REPORTS for sending batches and batch requests (the option Note
Acknowledgements should be deactivated!!!)
/XNFE/EVENT_BATCH_SEND for sending Events (cancellation and correction letter)
/XNFE/GET_ACKNOWLEDGMENT for processing negative acknowledgements retrieved from PI
/XNFE/CHECK_SRV_STATUS for checking the Web Service availability of SEFAZ and SCAN (if
you plan to use SVC, please read the respective section below)
/XNFE/UPDATE_ERP_STATUS for repeating the status update to ERP in case of technical problems
Monitors
Nothing has changed, the classic monitors for NF-es and NF-e batches have not changed; however
only NF-es with Layout 2.00 are shown here. The Service Status Monitor has also not changed
(unless you implement SVC).
2014-02-11
PUBLIC
5/10
The process for issuing NF-e with layout 3.10 differs from that of layout 2.00. It has been developed
using new functions and new database tables. Therefore you need separate Customizing settings, batch
Jobs and monitors:
1. Customizing
For issuing NFE with layout 3.10 there are new customizing activities required:
NF-e: Maintain Connected Government Systems
NF-e: Maintain Version of Message Types (also for the issued events!)
NF-e: Define Query for Service Status for Authority (SEFAZ)
NF-e: Maintain Batch Parameters (also available as Current Settingsfor the system administrator)
2. Batch Jobs
New: /XNFE/NFE_BATCH_PROCESS for sending batches and batch requests
New: /XNFE/NFE_B2B_SEND for sending authorized NF-es to the Business Partners
New: /XNFE/NFE_SKIP_SEND for sending skip requests.
New: /XNFE/NFE_CONTINUE_PROCESS for repeating the status update to ERP in case of technical
problems
New: /XNFE/NFE_CHECK_SRV_STATUS for checking the Web Service availability of SEFAZ,
SCAN and SVC.
Nor changed: /XNFE/EVENT_BATCH_SEND for sending Events (cancellation and correction
letter)
Not changed: /XNFE/GET_ACKNOWLEDGMENT for processing negative acknowledgements from
PI
3. Monitors
There are new monitors for NF-es with Layout 3.10:
New NF-e Monitor
New NF-e Batch Monitor
New Service Status Monitor (SEFAZ, SCAN and SVC)
4. BAdI
The connected ERP system transfers the NF-e data using the new function module /XNFE/
OUTNFE_CREATE. This function provides two generic parameters IT_NFE_EXT1 & IT_NFE_EXT2 for
transferring additional information (for example, data needed for the B2B communication) to the
SAP NFE system. A new BAdI Saving of Extension Parameters from ERP Back-End System writes this data to
the database.
5. PI Configuration
The new WebServices require a new set of PI Configuration the corresponding integration
scenarios are delivered with namespace http://sap.com/xi/NFE/008. Note that you also need to
configure the Integration Scenarios for issuing events from the same namespace! The only
6/10
PUBLIC
2014-02-11
exception are the two integration scenarios needed for the XML Download which you can still
access athttp://sap.com/xi/NFE/006.
Changes when using the new contingency system SVC
As of SP16, the service status check was extended to support the SVC contingency systems. In order to
not disrupt the issuing of NF-es with Layout 2.00, the new capabilities were implemented in parallel
(including the backend function, customizing and the monitor). The new Service Status Check is always
used for NF-es with Layout 3.10, whereas the older version is used for Layout 2.00. Before you can switch
to the new Service Status Check you need to change the SAP NFE system with SAP Note 1973306 and
the ERP backend by implementing SAP Note 1965381.
CAUTION
Before you implement these notes, configure the new Service Status Check and make sure that the
report for reading the information from the authority systems is being run regularly.
1.
2.
3.
Customizing
SW NF-e: Maintain Connected Government Systems
SW NF-e: Maintain Version of Message Types
SW NF-e: Define Query for Service Status for Authority (SEFAZ)
Batch Jobs
New: /XNFE/NFE_CHECK_SRV_STATUS for checking the Web Service availability of SEFAZ, SCAN
and SVC
Monitor
New Service Status Monitor (SEFAZ, SCAN and SVC)
2014-02-11
PUBLIC
7/10
SAP AG
Dietmar-Hopp-Allee 16
69190 Walldorf
Germany
T +49/18 05/34 34 34
F +49/18 05/34 34 20
www.sap.com
8/10
PUBLIC
2014-02-11
SAP AG
Dietmar-Hopp-Allee 16
69190 Walldorf
Germany
T +49/18 05/34 34 34
F +49/18 05/34 34 20
www.sap.com