Professional Documents
Culture Documents
P Accessing Pasolink Neo With Web Based LCT
P Accessing Pasolink Neo With Web Based LCT
2.4. Insert the CD-ROM of the USB driver into the PC and select Search for the best driver in these locations and
check Search removal media [floppy, CD-ROM...], then, click on Next button. If you have the driver on a USB
stick or in a folder on your PC you should choose Include this location in the search and specify the location where
the driver is.
2.6. Click on the Continue Anyway button in the Hardware Installation alert pop-up
2.7. USB driver installation will be started, the necessary files for the new hardware will be
installed
2.8. At the end of the installation the last window of the Found New Hardware Wizard appears.
2.9. Click on the Finish button. This is the end of the USB driver installation.
3.2. The Network Connections window appears. Click on Create a new connection in the
Network Tasks category.
3.3. The Welcome to the New Connection Wizard window appears. Click on Next button to
continue.
3.4. Select Connect to the network at my workplace and click on Next button to continue.
3.6. On the New Connection Wizard window, enter LCT in theCompany Name entry field and click
on Next button to continue.
3.7. Enter 1234 in the Phone number field and click on Next button to continue.
3.8. Verify that the connection LCT has displayed as the connection registered. You can also create a shortcut
on your desktop if you need. Click on Finish button.
3.17. Retain the default setting on the Advanced tab and click OK.
4.5. Open the Internet explorer and enter the address http://172.17.254.253 and then press Enter.
4.6. The LCT login window appears.
You can select the username User which does not require a password (only for monitoring)
Or you can choose username Admin and password 12345678 (to access the LCT and for monitoring)
After you selected the proper username and password click on the Login button.