Professional Documents
Culture Documents
Assignment-II Fluid Mechanics-1
Assignment-II Fluid Mechanics-1
ASSIGNMENT-II
Q.1
Open
Q.2
Open
For the manometer as shown in the figure all the fluids are at 20 oC. If PB-PA= 97Kpa
determine the height H (Ans= 0.225m)
Q.3
Open
Find the pressure difference between the two pipelines as shown in the figure (Ans=
8338.5Pa)
Q.4
Open
Find the pressure difference between the two pipelines as shown in the figure
(Ans=27672Pa)
Q.5
Open
Q.6
A rectangular gate that is 2 m wide is located in the vertical wall of a tank containing
water as shown in Fig. P2.72. It is desired to have the gate open automatically when the
depth of water above the top of the gate reaches 10 m. (a) At what distance, d, should
the frictionless horizontal shaft be located? (b) What is the magnitude of the force on
the gate when it opens? (Ans a= 2.11m, b= 941760N)
Q.7
A homogeneous, 2.4m wide, 9.6 m long rectangular gate weighing 3.6 KN is held in a
place by a horizontal flexible cable as shown in Figure. Water acts against the gate
Open
which is hinged at point A. Friction in the hinge is negligible. Determine the tension in
the cable. (Ans= 39.179KN)
Q.8
Open
A multi-fluid container is connected to a U-tube. For the given specific gravities and
fluid column heights, Find the gage pressure at A e (Ans=1597Pascal)
Open
Q.9
Open