(ii) one pn junction (iii) three pn junctions (iv) none of the above ans. ii 12. The normal way to turn on a diac is by ............ (i) gate current (ii) gate voltage (iii) breakover voltage (iv) none of the above ans. iii 13. A diac is ............ switch. (i) an a.c. (ii) a d.c. (iii) a mechanical (iv) none of the above ans. i 14. In a UJT, the p-type emitter is ............ doped. (i) lightly (ii) heavily (iii) moderately (iv) none of the above ans. ii 15. Power electronics essentially deals with control of a.c. power at ............ (i) frequencies above 20 kHz (ii) frequencies above 1000 kHz (iii) frequencies less than 10 Hz (iv) 50 Hz frequency ans. iv