Professional Documents
Culture Documents
Daq Getting Started: Read Me First: Ni-Daqmx and Daq Device Installation Guide
Daq Getting Started: Read Me First: Ni-Daqmx and Daq Device Installation Guide
Read Me First:
NI-DAQmx and DAQ Device Installation Guide
This document contains instructions in English, French, German, Japanese, Korean,
and Simplified Chinese.
Ce document contient des instructions en anglais, franais, allemand, japonais,
coren et chinois simplifi.
Dieses Dokument enthlt Anweisungen in Englisch, Franzsisch, Deutsch,
Japanisch, Koreanisch und vereinfachtem Chinesisch.
, , , , , ( )
.
Install NI-DAQmx
Install NI-DAQmx driver software before installing new hardware devices so
Windows can detect them.
1. Insert the software media. If the NI-DAQmx installer does not open
automatically, select StartRun. Enter x:\autorun.exe, where x is
the drive letter. Complete the instructions.
Caution
ni.com
CompactDAQ Devices
Complete the following steps to install a C Series I/O module in a
CompactDAQ system:
1. Attach a ring lug to a 14 AWG (1.6 mm) wire. Connect the ring lug to the
ground terminal on the side of the NI cDAQ chassis using the ground
screw. Attach the other end of the wire to the system safety ground.
Additionally, attach a wire with a ring lug to all other C Series I/O
module cable shields. You must connect this wire to the ground terminal
of the chassis using the ground screw.
Caution If hazardous voltages, greater than 42.4 V or 60 VDC to
earth ground, are present, special safety guidelines apply. Refer to
the C Series module user guide before continuing.
2. Install C Series I/O modules. Squeeze both C Series I/O module latches,
insert each I/O module into an empty module slot, and press until both
latches lock the module in place. Refer to the C Series I/O module user
guide for more information, such as signal connections, safety
precautions, and module ratings.
1
.
3. If you have a USB cDAQ chassis, connect the chassis using the USB cable
supplied with your chassis to any available USB port on your computer
system. If you have an Ethernet cDAQ chassis, connect the chassis to your
network using a CAT5e or crossover Ethernet cable. Refer to the DAQ
Getting Started Guide for network configuration information.
4. Connect the power source to the chassis. Most cDAQ chassis require an
external power supply that meets the specifications listed in the chassis
user documentation.
National Instruments
1
2
4. Insert the device into the applicable PCI/PCI Express system slot. Gently
rock the device into place. Do not force the device into place.
Per the PCI standard, NI PCI DAQ devices with the Universal
PCI connector are supported in PCI-compliant buses, including PCI-X.
You cannot install PCI Express devices in PCI slots and vice versa.
PCI Express devices support up-plugging into a PCI Express slot of
higher lane width. For guidelines, refer to ni.com/pciexpress.
5. Secure the device mounting bracket to the computer back panel rail.
6. (Optional) On NI M and X Series PCI Express devices, such as the
NI PCIe-625x/635x, connect the PC and the device disk drive power
connectors. Refer to the device user manual on the NI-DAQmx media for
when to use the disk drive power connector. Use a disk drive power
connector that is not in the same power chain as the hard drive.
ni.com
2
1
1
PX
I-1
000B
3
6
4
1
2
3
4
3.
4.
5.
6.
7.
8.
9.
10.
If you are using a PXI Express chassis, you can place PXI devices in
the PXI slots. If a PXI device is hybrid slot compatible, you can use the
PXI Express Hybrid slots. PXI Express devices can be placed only
in PXI Express slots and PXI Express Hybrid slots. Refer to the chassis
documentation for details.
Remove the filler panel of an unused PXI/PXI Express slot.
Touch any metal part of the chassis to discharge static electricity.
Ensure that the PXI/PXI Express module injector/ejector handle is not
latched and swings freely.
Place the PXI/PXI Express module edges into the module guides at the
top and bottom of the chassis.
Slide the device into the PXI/PXI Express slot to the rear of the chassis.
When you begin to feel resistance, pull up on the injector/ejector handle
to latch the device.
Secure the device front panel to the chassis using the front-panel
mounting screws.
Plug in and power on your PXI/PXI Express chassis.
USB Devices
You must be an Administrator to install NI software and devices on your
computer. Complete these steps to install an NI device for USB:
1. Make power connections.
If you are using the BP-1 battery pack, install it as described in your
BP-1 installation guide.
Some NI devices for USB require external power. If your device has
an external power supply, verify that the voltage on the external
power supply, if any, matches the voltage in your area (for example,
120 or 230 VAC) and the voltage required by your device.
NI-DAQmx and DAQ Device Installation Guide
ni.com
2. Connect the power supply or power cord to an electrical outlet and your
device.
3. Connect the cable from the computer USB port or from any other hub to
any available USB port on the device.
4. If you have a USB device with a power switch, power on the device.
The computer should immediately detect your device.
When the computer recognizes a USB device, the LED on the device blinks
or lights up. Refer to the device documentation for LED pattern descriptions.
NI Device Monitor
After Windows detects newly installed NI USB devices, NI Device Monitor
runs automatically at startup.
Make sure the NI Device Monitor icon, shown at left, is visible in the
taskbar notification area. Otherwise, the NI Device Monitor does not
open. To turn the NI Device Monitor on, unplug your device, restart
NI Device Monitor, and plug in your device. Launch NI Device
Monitor from the Start menu or (Windows 8) from NI Launcher.
The NI Device Monitor prompts you to select from the following options.
These options may vary, depending on the devices and software installed on
your system.
Begin a Measurement with This Device Using
NI SignalExpressOpens an NI-DAQmx step that uses the channels
from your device in SignalExpress.
Begin an Application with This Device Using
NI LabVIEWLaunches LabVIEW. Choose this option if you have
already configured your device in MAX.
Run Test PanelsLaunches MAX test panels for your device.
Configure and Test This DeviceOpens MAX.
Take No ActionRecognizes your device but does not launch an
application.
National Instruments
Accessories
Install accessories and/or terminal blocks according to the instructions in
their installation guides. For SCXI and SCC signal conditioning systems,
continue with the instructions in the DAQ Getting Started Guide.
Troubleshooting
If you have problems installing your software, go to ni.com/support/
daqmx. For hardware troubleshooting, go to ni.com/support and enter
your device name, or go to ni.com/kb.
If you need to return your National Instruments hardware for repair or device
calibration, go to ni.com/info and enter rdsenn to start the Return
Merchandise Authorization (RMA) process.
Go to ni.com/info and enter rddq8x for a complete listing of the
NI-DAQmx documents and their locations.
Next Step
To confirm your device is working properly and start your application, refer
to the DAQ Getting Started Guide. After you install NI-DAQmx, the
NI-DAQmx software documents are accessible from StartAll Programs
National InstrumentsNI-DAQNI-DAQmx document title or
(Windows 8) NI Launcher. Additional resources are online at ni.com/
gettingstarted.
You can find device terminal/pinout locations in MAX, the NI-DAQmx Help,
or the device documentation. In MAX, right-click the device name under
Devices and Interfaces, and select Device Pinouts.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on National Instruments
trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products/technology, refer to the appropriate location: HelpPatents in your software,
the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. Refer to the Export
Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance
policy and how to obtain relevant HTS codes, ECCNs, and other import/export data.
20032013 National Instruments. All rights reserved.
373235W
Jul13
INITIATION DAQ
lire en premier :
Guide dinstallation de NI-DAQmx et des priphriques DAQ
Installez les logiciels avant dinstaller de nouveaux matriels.
Installez NI-DAQmx
Installez le driver NI-DAQmx avant dinstaller de nouveaux priphriques
matriels, de sorte que Windows puisse les dtecter.
1. Insrez le mdia du logiciel. Si linstalleur NI-DAQmx ne souvre pas
automatiquement, slectionnez DmarrerExcuter. Entrez
x:\autorun.exe, x tant la lettre du lecteur. Suivez les instructions qui
saffichent.
2. Enregistrez votre matriel NI en ligne, sur ni.com/register lorsque le
systme vous y invite.
3. La dernire bote de dialogue vous propose les options suivantes.
Cliquez sur Redmarrer ultrieurement pour installer un autre
logiciel NI ou de la documentation supplmentaire. Si vous utilisez
un lien MXI-3 partir dun PC pour contrler un chssis PXI, vous
devez quitter le programme et installer le logiciel MXI-3, disponible
sur ni.com/downloads, avant dutiliser le priphrique DAQ.
Cliquez sur Arrter ou Redmarrer si vous tes prt installer
votre priphrique.
Si vous avez des difficults installer votre logiciel, allez sur ni.com/
support/daqmx.
ni.com
Priphriques CompactDAQ
Effectuez les tapes suivantes pour installer un module dE/S de la srie C
dans un systme CompactDAQ :
1. Attachez une bague de retenue un cble 14 AWG (1,6 mm). laide de
la vis de masse, connectez la bague de retenue au terminal de masse sur
le ct du chssis NI cDAQ. Attachez lautre extrmit du fil la masse
du systme.
De plus, attachez un fil avec une bague de retenue tous les autres
blindages des cbles du module dE/S de la srie C. Vous devez connecter
ce fil au terminal de masse du chssis en utilisant la vis de masse.
Attention En prsence de tensions dangereuses suprieures 42,4
V ou 60 VDC la masse, des consignes de scurit spciales
sappliquent. Reportez-vous au guide de lutilisateur du module de
srie C avant de continuer.
1
.
1
2
ni.com
6. (Facultatif) Sur les cartes NI PCI Express des sries M et X, comme les
cartes NI PCIe-625x/635x, branchez le connecteur dalimentation du PC
celui de lecteur de disque de la carte. Reportez-vous au manuel de
lutilisateur du priphrique sur le mdia de NI-DAQmx pour savoir
quand utiliser le connecteur dalimentation de lecteur de disque. Utilisez
un connecteur dalimentation de lecteur de disque qui ne se trouve pas sur
la mme chane dalimentation que le disque dur.
2
1
National Instruments
1
PX
I-1
000B
3
6
4
1
2
3
4
1
2
3
4
ni.com
Priphriques USB
Vous devez avoir des droits dadministrateur pour installer les logiciels et les
priphriques NI sur votre ordinateur. Excutez ces tapes pour installer un
priphrique NI de type USB :
1. Effectuez les connexions dalimentation.
Si vous utilisez un pack batterie BP-1, installez-le suivant les
instructions de votre guide dinstallation BP-1.
Certains priphriques NI de type USB ncessitent une alimentation
externe. Si votre priphrique utilise une alimentation externe,
assurez-vous que la tension sur le bloc dalimentation externe, le cas
chant, est compatible avec la tension secteur de votre rgion (par
exemple, 120 ou 230 Vca) et avec la tension exige par votre
priphrique.
2. Connectez le bloc dalimentation ou le cordon dalimentation une prise
lectrique et votre priphrique.
3. Connectez le cble branch dans le port USB de lordinateur ou tout autre
concentrateur un port USB disponible du priphrique.
4. Si votre priphrique USB est quip dun bouton dalimentation,
mettez-le sous tension. Lordinateur devrait dtecter immdiatement
votre priphrique.
Lorsque lordinateur reconnat un priphrique USB, le tmoin LED du
priphrique clignote ou sallume. Reportez-vous la documentation sur le
priphrique pour obtenir une explication des tats de la LED.
National Instruments
Moniteur de priphriques NI
Lorsque Windows dtecte que des priphriques USB NI viennent dtre
installs, le Moniteur de priphriques NI sexcute automatiquement au
redmarrage.
Vrifiez que licne du Moniteur de priphriques NI, reprsente
gauche, est visible dans la zone de notification de la barre des tches.
Sinon, le Moniteur de priphriques NI ne souvrira pas. Pour lancer
le Moniteur de priphriques NI, dconnectez le priphrique,
redmarrez le Moniteur de priphriques NI et reconnectez le
priphrique. Lancez le Moniteur de priphriques NI partir du
menu Dmarrer ou du Lanceur dapplications NI (Windows 8).
Le Moniteur de priphriques NI vous demande de slectionner parmi les
options suivantes. Ces options varient en fonction des priphriques et des
logiciels qui sont installs sur votre systme.
Commencer une mesure en utilisant ce priphrique avec
NI SignalExpress Ouvre une tape NI-DAQmx qui utilise les voies
de votre priphrique dans SignalExpress.
Commencer une application avec ce priphrique en utilisant
NI LabVIEW Lance LabVIEW. Choisissez cette option si vous avez
dj configur votre priphrique dans MAX.
Afficher les panneaux de test Lance les panneaux de test MAX pour
votre priphrique.
Configurer et tester ce priphrique Ouvre MAX.
Ne rien faire Reconnat votre priphrique, mais ne lance pas
dapplication.
Pour accder aux fonctionnalits suivantes, cliquez avec le bouton droit sur
licne du Moniteur de priphriques NI :
Excuter au dmarrage Lance le Moniteur de priphriques NI au
dmarrage du systme (paramtrage par dfaut).
Rinitialiser les actions associes aux priphriques Slectionnez
cette option pour annuler toutes les actions dfinies par la case Toujours
effectuer cette action dans la bote de dialogue de lancement
automatique de priphriques.
ni.com
Accessoires
Installez les accessoires et/ou les blocs de connexion en suivant les
instructions fournies dans leur guide dinstallation respectif. Pour les
systmes de conditionnement de signal SCXI et SCC, continuez linstallation
en suivant les instructions du Guide dinitiation DAQ.
Dpannage
Si vous avez des difficults installer votre logiciel, allez sur ni.com/
support/daqmx. Pour un dpannage matriel, allez sur ni.com/support
et entrez le nom de votre priphrique, ou allez sur ni.com/kb.
Si vous devez renvoyer votre matriel National Instruments pour le faire
rparer ou talonner, allez sur ni.com/frinfo et entrez linfo-code rdfcon
pour obtenir les informations de contact de votre filiale afin de savoir
comment obtenir une autorisation de renvoi de marchandise.
Allez sur ni.com/frinfo et entrez linfo-code rddq8x pour obtenir la liste
complte des documents relatifs NI-DAQmx et leur emplacement.
tape suivante
Pour confirmer que votre priphrique fonctionne correctement et dmarrer
votre application, reportez-vous au Guide dinitiation DAQ. Une fois
NI-DAQmx install, la documentation sur le logiciel NI-DAQmx est
disponible partir de DmarrerTous les programmesNational
InstrumentsNI-DAQtitre du document NI-DAQmx ou partir du
Lanceur dapplications NI (Windows 8). Des ressources supplmentaires
sont disponibles en ligne sur ni.com/gettingstarted.
Vous trouverez le schma de brochage du priphrique dans MAX, dans
lAide NI-DAQmx ou dans la documentation du priphrique. Dans MAX,
cliquez avec le bouton droit sur le nom du priphrique sous Priphriques et
interfaces et slectionnez Brochage du priphrique.
National Instruments
Veuillez consulter la rubrique NI Trademarks and Logo Guidelines sur ni.com/trademarks pour obtenir de plus amples
informations sur les marques de National Instruments. Les autres noms de produits et de socits mentionns aux prsentes sont les
marques ou les noms de leurs propritaires respectifs. Pour la liste des brevets protgeant les produits/technologies National
Instruments, veuillez vous rfrer, selon le cas : la rubrique AideBrevets de votre logiciel, au fichier patents.txt sur votre
mdia, ou National Instruments Patent Notice sur ni.com/patents. Vous trouverez les contrats de licence utilisateur final
(CLUF) et notices juridiques de tiers dans le fichier Readme de votre produit NI. Reportez-vous la page Export Compliance
Information sur ni.com/legal/export-compliance pour consulter la politique de National Instruments en matire de
conformit la rglementation gouvernant le commerce international et pour savoir comment obtenir les codes de tarif douanier
(HTS) et les numros ECCN pertinents, ainsi que dautres donnes relatives limport-export.
20032013 National Instruments. All rights reserved.
373235W
Juillet13
Sicherheitshinweise und Informationen zur Einhaltung von Sicherheitsstandards finden Sie in den Beschreibungen der einzelnen Gerte auf
ni.com/manuals oder auf dem NI-DAQmx-Datentrger.
Auf Ihrem Gert knnen folgende Symbole aufgedruckt sein:
Mit diesem Symbol wird vor Datenverlust, Systemabsturz und Verletzungen gewarnt. Welche Vorsichtsmanahmen bei Produkten mit
diesem Symbol zu treffen sind, wird im Faltblatt Read Me First:
Safety and Electromagnetic Compatibility erlutert.
Wenn ein Produkt mit diesem Symbol gekennzeichnet ist, besteht die
Gefahr eines elektrischen Schlags.
Bei Produkten mit diesem Symbol kann eines der Bauteile hei werden. Bei Berhrung besteht Verletzungsgefahr.
CompactDAQ
Gehen Sie zum Einbau von C-Serien-Modulen in ein CompactDAQ-Chassis
wie folgt vor:
1. Bringen Sie an einem 1,6 mm dicken Draht einen Kabelschuh an.
Schrauben Sie den Kabelschuh dann mit der mitgelieferten Schraube am
Erdanschluss an der Lngsseite des NI-cDAQ-Chassis fest. Erden Sie das
andere Ende des Drahts.
Verbinden Sie die Kabelabschirmungen jedes C-Serien-Moduls mit
einem Draht, an dem ein Kabelschuh angebracht ist. Befestigen Sie
diesen Draht ebenfalls mit der mitgelieferten Schraube am Erdanschluss
des Chassis.
Installationsanleitung fr NI-DAQmx und DAQ-Gerte
20
ni.com
Vorsicht! Bei gefhrlichen Spannungen sind bestimmte Sicherheitsrichtlinien einzuhalten. Als gefhrlich gelten alle Gleichspannungen ber 42,4 Volt und alle Wechselspannungen ber
60 Volt. Lesen Sie dazu die Bedienungsanleitung des Moduls.
2. Bauen Sie nun die Module ein. Drcken Sie beide Hebel eines Moduls
nach unten, schieben Sie es in einen leeren Steckplatz und drcken Sie,
bis das Modul einrastet. Weitere Informationen (z. B. ber die Modulkategorien, Signaleingnge und die geltenden Sicherheitsbestimmungen)
finden Sie in der Bedienungsanleitung des Moduls.
1
.
21
1
2
1 PCI-/PCI-Express-Karte
2 PCI-/PCI-Express-Systemsteckplatz
3 PC mit PCI-/PCI-Express-Steckplatz
4. Fhren Sie die Karte in den PCI- bzw. PCI-Express-Steckplatz ein und
drcken Sie sie hinein. Wenden Sie keine Gewalt an!
NI-PCI-Datenerfassungskarten mit universellem PCI-Steckverbinder
sind entsprechend dem PCI-Standard mit allen PCI-fhigen Bussen
(u. a. PCI-X) kompatibel. PCI und PCI Express sind mechanisch und
elektrisch inkompatibel. PCI-Express-Karten mit schmalem Steckverbinder knnen allerdings in breiteren PCI-Express-Steckpltzen genutzt
werden. Siehe dazu ni.com/pciexpress.
5. Schrauben Sie die Metallschiene der Karte an der Rckwand des
Computers fest.
6. (Optional) NI-PCI-Express-Karten der M- und X-Serie
(z. B. NI PCIe-625x/635x) sind an einen ungenutzten 4-poligen Stromversorgungsstecker fr die Festplatte anzuschlieen. Wann diese
Stromversorgung bentigt wird, ist im Handbuch des Gerts beschrieben,
das Sie in elektronischer Form auf dem NI-DAQmx-Datentrger finden.
Arbeiten Sie nach Mglichkeit mit einem anderen Stromversorgungsstrang als dem, ber den die Festplatte versorgt wird.
2
1
Festplatten-Stromversorgungsstecker
22
ni.com
1
PX
I-1
000B
3
6
4
1
2
3
4
PXI-/PXI-Express-Chassis
PXI-/PXI-Express-Controller
PXI-/PXI-Express-Modul
Arretierhebel
National Instruments
23
NI PXIe-1062Q
3 Steckplatz fr PXI-ExpressHybrid-Module
4 Steckplatz fr PXI-ExpressTiming-Module
3.
4.
5.
6.
7.
8.
9.
10.
USB-Gerte
Zur Installation von Software und Gerten von National Instruments bentigen Sie Administratorrechte. USB-Gerte von National Instruments werden
wie folgt angeschlossen:
1. Befestigen Sie die Kabel fr die Stromversorgung.
BP-1-Akkupacks sind der Beschreibung nach anzuschlieen.
Fr manche USB-Gerte von National Instruments ist eine separate
Stromversorgung, z. B. ein Netzteil, erforderlich. Vergewissern Sie
sich, dass die Netzspannung, fr die das Netzteil ausgelegt ist (z. B.
120 oder 230 V~), den lokalen Gegebenheiten entspricht und die
Ausgangsspannung des Netzteils mit der bentigten Eingangsspannung des USB-Gerts bereinstimmt.
Installationsanleitung fr NI-DAQmx und DAQ-Gerte
24
ni.com
2. Schlieen Sie das Gert an die Stromversorgung oder eine Steckdose an.
3. Verbinden Sie das Gert mit dem USB-Anschluss des Computers oder
einem USB-Hub.
4. Bettigen Sie den Netzschalter (sofern vorhanden). Das Gert sollte
automatisch vom Computer erkannt werden.
Bei Erkennung eines USB-Gerts leuchtet oder blinkt am Gert eine LED.
Die durch die LED angezeigten Betriebszustnde sind in der Beschreibung
zum Gert erklrt.
NI-Gertemonitor
Wenn ein NI-USB-Gert in Windows erkannt wird, startet automatisch der
NI-Gertemonitor.
Das links abgebildete Symbol des NI-Gertemonitors muss im
Windows-Infobereich neben der Systemuhr angezeigt werden.
Anderenfalls ffnet sich das Programm nicht. Wenn das Symbol
nicht angezeigt wird, trennen Sie das Gert, starten Sie den
NI-Gertemonitor neu und schlieen Sie das Gert wieder an. Das
Programm wird entweder ber das Windows-Startmen oder
(Windows 8) ber das NI-Startmen geffnet.
Im NI-Gertemonitor werden Sie zur Auswahl einer der nachfolgenden
Optionen aufgefordert. Die Optionen knnen je nach installierter Hard- und
Software unterschiedlich sein.
Eine Messung mit diesem Gert durchfhren - NI SignalExpress
verwendenStartet in SignalExpress einen NI-DAQmx-Schritt, der mit
den Kanlen Ihres Gerts arbeitet.
Eine Anwendung mit diesem Gert erstellen - NI LabVIEW verwendenStartet LabVIEW. Whlen Sie diese Option, wenn das Gert
bereits im MAX konfiguriert wurde.
Testpanels startenStartet das MAX-Testpanel zu Ihrem Gert.
Dieses Gert konfigurieren und testenStartet MAX.
Keine Aktion ausfhrenStartet kein Programm. Das Gert wird aber
trotzdem erkannt.
Wenn Sie das NI-Gertemonitor-Symbol mit der rechten Maustaste anklicken, werden folgende Optionen angezeigt:
Beim Start ausfhrenDer NI-Gertemonitor wird nach dem Systemstart aufgerufen (Standardeinstellung).
National Instruments
25
Zubehr
Das Anschlieen von Zubehrteilen und Anschlussblcken wird in der dazugehrigen Anleitung beschrieben. Fr SCXI- und SCC-Systeme folgen Sie
bitte der Anleitung Erste Schritte mit NI-DAQ.
Fehlersuche
Hilfe zu Problemen bei der Installation Ihrer Software erhalten Sie unter
ni.com/support/daqmx. Bei Problemen mit der Hardware besuchen Sie
ni.com/support und geben Sie den Namen des Gerts ein oder besuchen
Sie ni.com/kb.
Wenn Sie ein Gert zur Reparatur oder Kalibrierung an National Instruments zurcksenden mchten, erfahren Sie auf ni.com/info nach Eingabe von rdsenn,
was bei der Warenrcksendung an National Instruments zu beachten ist.
Eine vollstndige Liste der NI-DAQmx-Dokumente finden Sie auf ni.com/
info nach Eingabe des Infocodes rddq8x.
Nchster Schritt
Im Dokument Erste Schritte mit NI-DAQ erfahren Sie, wie Sie die Funktionen Ihres Gerts prfen und Ihre Applikation starten. Nach der Installation
von NI-DAQmx knnen Sie unter StartAlle ProgrammeNational
InstrumentsNI-DAQNI-DAQmx-Dokument oder (Windows 8) ber das
NI-Startmen auf die entsprechende Softwaredokumentation zugreifen. Weitere Informationen erhalten Sie unter ni.com/gettingstarted.
Anschlussplne und Pinbelegungen finden Sie im MAX, in der Hilfe zu
NI-DAQmx oder in der Gertebeschreibung. Klicken Sie im MAX unter
Gerte und Schnittstellen mit der rechten Maustaste auf den Gertenamen
und whlen Sie Pinbelegung des Gerts aus.
Weitere Informationen zu Marken von National Instruments finden Sie in den NI Trademarks and Logo Guidelines auf ni.com/
trademarks. Sonstige hierin erwhnte Produkt- und Firmenbezeichnungen sind Marken oder Handelsnamen der jeweiligen
Unternehmen. Nhere Informationen ber den Patentschutz von Produkten oder Technologien von National Instruments finden Sie
unter HilfePatente in Ihrer Software, in der Datei patents.txt auf Ihrem Datentrger oder in den Patentinformationen von
National Instruments auf ni.com/patents. Informationen zu Endbenutzer-Lizenzvertrgen (EULAs) und Rechtshinweise von
Drittanbietern finden Sie in der Readme zu Ihrem Produkt von National Instruments. Informationen zu den von National Instruments
eingehaltenen internationalen Handelsbestimmungen sowie zu Bezugsquellen fr relevante HTS-Codes, ECCNs und andere
Import-/Export-Kenndaten finden Sie auf ni.com/legal/export-compliance unter der berschrift Export Compliance
Information.
20032013 National Instruments. Alle Rechte vorbehalten.
373235W
Juli13
DAQ
:
NI-DAQmx DAQ
NI LabVIEW NI ANSI C
Visual Basic .NET ADE
ADE
NI-DAQmx
Readme
NI-DAQmx
Windows
NI-DAQmx
1. NI-DAQmx
x:autorun.exex
2. ni.com/register NI
3.
NI
PC PXI
MXI-3 DAQ
ni.com/downloads MXI-3
LabVIEW Real-Time
MAX NI-DAQmx
MAX
MAX
ni.com/support/
daqmx
DAQ
DAQ SCXI
DAQ
ni.com/manuals
NI-DAQmx
NI-DAQmx DAQ 28
ni.com
CompactDAQ
C I/O CompactDAQ
1. 14 AWG1.6 mm
NI cDAQ
C I/O
42.4 V 60 VDC
2. C I/O C I/O
I/O
C I/O
1
.
1 USB
2 C I/O
1. NI cDAQ
DAQ
4. cDAQ
National Instruments
29 NI-DAQmx DAQ
1
2
3 PCI/PCI Express PC
2. PCI/PCI Express
4. PCI/PCI Express
5.
NI-DAQmx DAQ 30
ni.com
6. NI M X PCI Express
NI PCIe-625x/635x
NI-DAQmx
2
1
1
2 PC
3. PCI Express
MAX
PCI Express DAQ
DAQ
Windows 8NI DAQ
7.
8.
PXI/PXI Express
:
National Instruments
31 NI-DAQmx DAQ
1
PX
I-1
000B
3
6
4
1
2
3
4
PXI/PXI Express
PXI/PXI Express
PXI/PXI Express
5
6
7
4. PXI/PXI Express
2. PXI/PXI Express
PXI/PXI Express
NI PXIe-1062Q
1
2
3
4
PXI Express
PXI Express
PXI Express
PXI Express
5. PXI Express/PXI Express /PXI
3. PXI/PXI Express
4.
5. PXI/PXI Express
NI-DAQmx DAQ 32
ni.com
6. PXI/PXI Express
7. PXI/PXI Express
8.
9.
USB
NI
USB NI
1.
BP-1 BP-1
USB NI
2.
3. USB
USB
4. USB
USB LED
LED
Windows
Vista Windows
Vista
National Instruments
33 NI-DAQmx DAQ
NI
NI USB Windows NI
NI
NI USB
NI NI
NI
Windows 8NI NI
NI
NI SignalExpress
SignalExpress
NI-DAQmx
NI LabVIEW
LabVIEW MAX
MAX
MAX
NI
NI
NI NI
Windows 8NI
NI
NI-DAQmx DAQ 34
ni.com
ni.com/support/
daqmx
ni.com/support ni.com/kb
/
0120-527-196 9:00 12:0013:00 8:00
NI-DAQmx
ni.com/jp/info jpze2v
DAQ NI-DAQmx
NI-DAQmx
National Instruments NI-DAQ NI-DAQmx
Windows 8NI
ni.com/
gettingstarted
MAXNI-DAQmx
MAX
373235W
2013 7
DAQ
Read Me First:
NI-DAQmx DAQ
.
NI LabVIEW NI ANSI C
Visual Basics .NET (ADE)
. ADE
NI-DAQmx Readme .
.
NI-DAQmx
NI-DAQmx
Windows .
1. . NI-DAQmx
, .
x:\autorun.exe . x
. .
2. NI ni.com/register
.
3. :
NI
. PC MXI-3 PXI
, DAQ
ni.com/downloads MXI-3 .
.
, ,
. , NI
. .
DAQ ,
. DAQ
SCXI , DAQ
.
.
.
, ni.com/manuals
NI-DAQmx
.
.
, ,
.
, Read Me First:
Safety and Electromagnetic Compatibility
.
.
.
.
CompactDAQ
CompactDAQ C I/O
.
37
ni.com
C I/O
.
.
42.4 V 60 VDC
.
C .
2. C I/O . C I/O
, I/O
. , ,
C I/O
.
1
.
USB
C I/O
1. cDAQ
1. .
2. .
National Instruments
38
NI-DAQmx DAQ
3. .
3
1
2
1
2
PCI/PCI Express PC
2. PCI/PCI Express
4. PCI/PCI Express .
. .
PCI Universal PCI NI PCI DAQ
PCI-X PCI
. PCI Express PCI , PCI
PCI Express . PCI Express
(Lane Width) PCI Express
. ni.com/
pciexpress .
5. .
6. ( ) NI PCIe-625x/635x NI M X PCI Express
PC
.
NI-DAQmx
.
.
2
1
PC
3. PCI Express
NI-DAQmx DAQ
39
ni.com
.
NI
PCI Express DAQ ;
DAQ .
(Windows 8) NI DAQ .
7. .
8. .
1. PXI/PXI Express .
.
PXI/PXI Express
Read Me First: Safety and Electromagnetic
Compatibility .
1
PX
I-1
000B
3
6
4
1
2
3
4
PXI/PXI Express
PXI/PXI Express
PXI/PXI Express
5
6
7
4. PXI/PXI Express
National Instruments
40
NI-DAQmx DAQ
2. PXI/PXI Express .
PXI/PXI Express
; .
NI PXIe-1062Q
1
2
PXI Express
PXI Express
3
4
NI-DAQmx DAQ
41
ni.com
USB
NI
. USB NI
:
1. .
BP-1 BP-1
.
USB NI
. ,
( 120 230 VAC)
.
2.
.
3. USB
USB .
4. USB ,
. .
USB LED
. LED .
Windows
Windows Vista
. Vista
.
.
NI
Windows NI USB , NI
.
NI
. NI
. NI
, NI
. (Windows 8) NI
NI .
National Instruments
42
NI-DAQmx DAQ
NI
.
.
: NI SignalExpress SignalExpress
NI-DAQmx
.
: NI LabVIEW LabVIEW
. MAX
.
MAX
.
MAX .
.
NI
:
NI
( ).
.
NI . NI
, (Windows 8) NI NI
.
. SCXI SCC DAQ
.
NI-DAQmx DAQ
43
ni.com
, ni.com/support/
daqmx . ni.com/support
ni.com/kb .
National Instruments
, National Instruments .
(02) 3451-3400, E- nikorea.ae@ni.com .
ni.com/info rddq8x NI-DAQmx
.
, DAQ . NI-DAQmx
, NI-DAQmx National
Instruments NI-DAQ NI-DAQmx
(Windows 8) NI .
ni.com/gettingstarted .
MAX, NI-DAQmx /
. MAX
.
373235W
2013 7
DAQ
NI-DAQmx
DAQ
NI NI LabVIEW
ADE ANSI C Visual Basic .NET NI-DAQmx
ADE NI-DAQmx
NI-DAQmx
NI-DAQmx
Windows
1. NI-DAQmx
x:\autorun.exe x
2. ni.com/register NI
3.
NI PC
MXI-3 PXI DAQ
MXI-3 ni.com/downloads
LabVIEW Real-Time
NI-DAQmx MAX
NI-DAQmx MAX MAX
MAX
ni.com/support/daqmx
NI
DAQ
DAQ SCXI
DAQ
ni.com/manuals
NI-DAQmx
CompactDAQ
CompactDAQ C I/O
1. 14 AWG 1.6
NI cDAQ
C I/O
42.4 V 60 V
C
C I/O
NI-DAQmx DAQ
46
ni.com
1
.
USB
2
1
C I/O
cDAQ
4.
cDAQ
1.
2. /
3.
3
1
2
1
2
National Instruments
PCI/PCI Express
PCI/PCI Express
47
NI-DAQmx DAQ
4. PCI/PCI Express
5.
6. NI M X PCI Express
NI PCIe-625x/635x PC
NI-DAQmx
2
1
PC
PCI Express
MAX
PCI Express DAQ DAQ
(Windows 8) NI DAQ
7.
8.
1. PXI/PXI Express
PXI/PXI Express
NI-DAQmx DAQ
48
ni.com
1
PX
I-1
000B
3
6
5
1
2
3
4
PXI/PXI Express
PXI/PXI Express
PXI/PXI Express
5
6
7
PXI/PXI Express
1
2
PXI Express
PXI Express
5
3
4
PXI Express
PXI Express
3.
4.
5.
6.
7.
8.
PXI/PXI Express
PXI/PXI Express
PXI/PXI Express
PXI/PXI Express
National Instruments
49
NI-DAQmx DAQ
9.
10. PXI/PXI Express
USB
NI
USB NI
1.
BP-1 BP-1
USB NI
120 230 V
2.
3. USB USB
4. USB
USB LED
LED
Windows
NI
Windows NI USB NI
NI
NI
NI
(Windows 8) NI NI
NI
NI SignalExpress SignalExpress
NI-DAQmx
NI LabVIEW LabVIEW
MAX
MAX
NI-DAQmx DAQ
50
ni.com
MAX
NI
NI
NI (Windows 8) NI
NI
/ SCXI SCC
DAQ
ni.com/support/daqmx
ni.com/support ni.com/kb
NI ni.com/info
rdsenn (RMA)
NI-DAQmx ni.com/info
rddq8x
DAQ
NI-DAQmx National
InstrumentsNI-DAQNI-DAQmx (Windows 8)
NI NI-DAQmx
ni.com/gettingstarted
MAX NI-DAQmx /
MAX
National Instruments
51
NI-DAQmx DAQ
373235W-01
2013 7